Rename to INDEX_op_rems to emphasize signed inputs,
and mirroring INDEX_op_remu_*.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to INDEX_op_divs2 to emphasize signed inputs,
and mirroring INDEX_op_divu2_*. Document the opcode.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename to INDEX_op_divs to emphasize signed inputs,
and mirroring INDEX_op_divu_*.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rely on TCGOP_TYPE instead of opcodes specific to each type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Begin to rely on TCGOp.type to discriminate operations,
rather than two different opcodes. Convert mov first.
Introduce TCG_OPF_INT in order to keep opcode dumps the same.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the fully general extract opcodes instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Instead of having a compile-time TARGET_SUPPORTS_MTTCG definition,
have each target set the 'mttcg_supported' field in the TCGCPUOps
structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250405161320.76854-17-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By directly using TCGCPUOps::guest_default_memory_order,
we don't need the TCG_GUEST_DEFAULT_MO definition anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all Avocado tests have been converted to or been replaced by
other functional tests, we can delete the remainders of the Avocado
tests from the QEMU source tree.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250414113031.151105-16-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This file was meant for defining the vocabulary for our testing
efforts, but it did not age well: First, the definitions are not
only about the CI part, but also about testing in general, so most
of the information should rather reside in main.rst instead.
Second, some vocabulary has never been really adopted by the QEMU
project, for example we never really use the word "system testing"
since "system" rather means the system emulator binaries in the
QEMU project (and we also don't do any testing with other components
like libvirt and virt-managers here). It also defines that the qtests
are the "functional" tests in QEMU, which is not really up to date
anymore after the "tests/functional" framework has been introduced
a couple of months ago (FWIW, the qtests could rather be seen as a
mix between unit testing and functional testing).
To solve this problem, move the useful parts of this file into
main.rst and directly into ci.rst, and drop the ones (like "system
testing") that we don't really need anymore.
Message-ID: <20250314085959.1585568-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since we don't run the Avocado jobs in the CI anymore, rename
these variables to QEMU_JOB_FUNCTIONAL and QEMU_CI_FUNCTIONAL.
Also, there was a mismatch between the documentation and the
implementation of QEMU_CI_AVOCADO_TESTING: While the documentation
said that you had to "Set this variable to have the tests using the
Avocado framework run automatically", you indeed needed to set it
to make the pipelines appear in your dashboard - but they were never
run automatically in forks and had to be triggered manually. Let's
improve this now: No need to hide these pipelines from the users
by default anymore (the functional tests should be stable enough
nowadays), and rather allow the users to run the pipelines auto-
matically with this switch now instead, as was documented.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250414113031.151105-15-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Accept "... lorem ipsum ..." in addition to "...".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250404121413.1743790-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250404121413.1743790-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Consistently use two spaces to separate sentences.
Put "::" on a line of its own when it's preceded by whitespace.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250404121413.1743790-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We should tell the users where to find the log file.
While we're at it, also rename the "Overview" heading to a
more accurate "Introduction to writing tests" instead.
Reported-by: Aditya Gupta <adityag@linux.ibm.com>
Message-ID: <20250318092021.53719-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Before we enable the QGA and QSD namespaces, we need to disambiguate
some of the references that would become ambiguous as a result!
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-11-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch does three things:
1. Record the current namespace context in pending_xrefs so it can be
used for link resolution later,
2. Pass that recorded namespace context to find_obj() when resolving a
reference, and
3. Wildly and completely rewrite find_obj().
cross-reference support is expanded to tolerate the presence or absence
of either namespace or module, and to cope with the presence or absence
of contextual information for either.
References now work like this:
1. If the explicit reference target is recorded in the domain's object
registry, we link to that target and stop looking. We do this lookup
regardless of how fully qualified the target is, which allows direct
references to modules (which don't have a module component to their
names) or direct references to definitions that may or may not belong
to a namespace or module.
2. If contextual information is available from qapi:namespace or
qapi:module directives, try using those components to find a direct
match to the implied target name.
3. If both prior lookups fail, generate a series of regular expressions
looking for wildcard matches in order from most to least
specific. Any explicitly provided components (namespace, module)
*must* match exactly, but both contextual and entirely omitted
components are allowed to differ from the search result. Note that if
more than one result is found, Sphinx will emit a warning (a build
error for QEMU) and list all of the candidate references.
The practical upshot is that in the large majority of cases, namespace
and module information is not required when creating simple `references`
to definitions from within the same context -- even when identical
definitions exist in other contexts.
Even when using simple `references` from elsewhere in the QEMU
documentation manual, explicit namespace info is not required if there
is only one definition by that name.
Disambiguation *will* be required from outside of the QAPI documentation
when referencing e.g. block-core definitions, which are shared between
QEMU QMP and the QEMU Storage Daemon. In that case, there are two
options:
A: References can be made partially or fully explicit,
e.g. `QMP:block-dirty-bitmap-add` will link to the QEMU version of
the definition, while `QSD:block-dirty-bitmap-add` would link to the
QSD version.
B: If all of the references in a document are intended to go to the same
place, you can insert a "qapi:namespace:: QMP" directive to influence
the fuzzy-searching for later references.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-8-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a new directive that marks the beginning of a QAPI "namespace", for
example; "QMP", "QGA" or "QSD". This directive will associate all
subsequent QAPI directives in a document with the specified
namespace. This does not change the visual display of any of the
definitions or index entries, but does change the "Fully Qualified Name"
inside the QAPI domain's object table. This allows for two different
"namespaces" to define entities with otherwise identical names -- which
will come in handy for documenting both QEMU QMP and the QEMU Storage
Daemon.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-6-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Akin to the :module: override option, the :namespace: options allows you
to forcibly override the contextual namespace associatied with a
definition.
We don't necessarily actually need this, but I felt compelled to stick
close to how the Python domain works that offers context overrides.
As of this commit, it is possible to add e.g. ":namespace: QMP" to any
QAPI directive to forcibly associate that definition with a given
namespace.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20250313044312.189276-5-jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This was missed at the time.
Fixes: 812b31d3f9 ("configs: rename default-configs to configs and reorganise")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250306174113.427116-1-groug@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
