This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250429153907.31866-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support on ARMv7 has been dropped in commit 82bf7ae84c
("target/arm: Remove KVM support for 32-bit Arm hosts").
Update the comment in virt_cpu_mp_affinity() to avoid
mentioning it.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250429153907.31866-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the i.MX 8M Plus reference manual, a GPIO pin is
configured as an output when the corresponding bit in the GDIR
register is set. The function imx_gpio_set_int_line() is intended to
be a no-op if the pin is configured as an output, returning early in
such cases. However, it inverts the condition. Fix this by
returning early when the bit is set.
cc: qemu-stable@nongnu.org
Fixes: f442728097 ("i.MX: Add GPIO device")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250501183445.2389-4-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 6970f91ac7, "hw/pci-host/designware: Use deposit/extract
API" accidentally introduced a copy-and-paste error, causing Linux
6.14 to hang when initializing the PCIe bridge on the imx8mp-evk
machine. This fix corrects the error.
Fixes: 6970f91ac7 ("hw/pci-host/designware: Use deposit/extract API")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250501183445.2389-3-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The DEFINE_TYPES() macro doesn't need the qemu/module.h include.
Fixes: 13a07eb146 ("hw/pci-host/designware: Declare CPU QOM types using DEFINE_TYPES() macro")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250501183445.2389-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nuvoton's PSPI is a general purpose SPI module which enables
connections to SPI-based peripheral devices. Attach it to the NPCM8XX.
Tested:
NPCM8XX PSPI driver probed successfully from dmesg log.
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20250414020629.1867106-1-timlee660101@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::no_highmem_ecam field was only
used by virt-2.12 machine, which got removed. Remove it
and simplify virt_instance_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::smbios_old_sys_ver field was
only used by virt-2.11 machine, which got removed.
Remove it and simplify virt_build_smbios().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::claim_edge_triggered_timers field
was only used by virt-2.8 machine, which got removed.
Remove it and simplify fdt_add_timer_nodes() and build_gtdt().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::no_its field was only used by
virt-2.7 machine, which got removed. Remove it and
simplify virt_instance_init() and virt_acpi_build().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::disallow_affinity_adjustment
field was only used by virt-2.6 machine, which got
removed. Remove it and simplify virt_cpu_mp_affinity().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[PMM: Remove now-unused variable]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VirtMachineClass::no_pmu field was only used by
virt-2.6 machine, which got removed. Remove it and
simplify machvirt_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This machine has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") it can now be removed.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM8XX SoC is the successor of the NPCM7XX. It features quad-core
Cortex-A35 (Armv8, 64-bit) CPUs and some additional peripherals.
Correct the `valid_cpu_types` setting to match the NPCM8XX SoC.
Cc: qemu-stable@nongnu.org
Fixes: 7e70eb3cad ("hw/arm: Add NPCM845 Evaluation board")
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Message-id: 20250428022934.3081139-1-timlee660101@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fixes for file descriptor reclaiming algorithm (i.e. when running
towards host's allowed limit of max. open file descriptors).
* Additional fixes on use-after-unlink idiom (i.e. client operations on a
file descriptor after file has been removed).
-----BEGIN PGP SIGNATURE-----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=hfW6
-----END PGP SIGNATURE-----
Merge tag 'pull-9p-20250505' of https://github.com/cschoenebeck/qemu into staging
9pfs changes:
* Fixes for file descriptor reclaiming algorithm (i.e. when running
towards host's allowed limit of max. open file descriptors).
* Additional fixes on use-after-unlink idiom (i.e. client operations on a
file descriptor after file has been removed).
# -----BEGIN PGP SIGNATURE-----
#
# iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmgYie0XHHFlbXVfb3Nz
# QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5XbDRAAq5SW7Hxifdhf1ZRBtkVOD88q
# Iw/OrMLIke4pCQwRElCDrE0mhycqyUpNX67eIye7qx0dJl2btFQUI9L6YuCDFtcG
# fPORZl51V81BOXqS8MhbK1oDxidl+cnpA8GcA1OyhYjxBifOy/x/0KG0pZVwzi0Y
# jhAIdsfeSenTE0Zzb02oh9mVmlMtKnwrSz7R0IB3Sv575CQiO76OM5B9sps1TUPu
# NrnQYBIB+EwJnI+l9NOKzNa7AUxV/S73OFCyJkQCON2ZHWiVadgXxjlX3kHyh9oL
# 3uiiTdC2694jU0RaVMMSNLfdIG4YK2GkKPHM7qLYF8Kdc5QogEJifS/RoihCnZFR
# X72G7mOVo8/7goRBt3DGQCwz3eUgqTO9iPFn1hJRvx9x/CVlFi2eOP+5nHR5PMEO
# qSY2of6LziCslNXvxjjhf7HmRhlugkHqpr+UGTxwMGazr88bHKNFbsh/3BcTmWwW
# /wGRfEFse3exgFiCtoebavxbJaUeI0Y93S4KidOhhqrQFz24k2AElgFrb1gEpbht
# GWW8YEblL7Lj8mecFATXKiInHCyhVPFmuAO//Wbu9juJVcNPtl67f017bCR+90H3
# GrRJqorHrp6icGQmXSM+Qdrr3B21RZwqb3W4mdMOWN3Zg5bHPHJ6rx8BRe7qDHBH
# mWtvrsUfcL0sRW0nkgc=
# =hfW6
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 05 May 2025 05:50:37 EDT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20250505' of https://github.com/cschoenebeck/qemu:
9pfs: fix 'total_open_fd' decrementation
tests/9p: Test `Tsetattr` can truncate unlinked file
tests/9p: add 'Tsetattr' request to test client
9pfs: Introduce futimens file op
9pfs: Introduce ftruncate file op
9pfs: Don't use file descriptors in core code
9pfs: local : Introduce local_fid_fd() helper
9pfs: fix FD leak and reduce latency of v9fs_reclaim_fd()
9pfs: fix concurrent v9fs_reclaim_fd() calls
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
According to 'man 2 close' errors returned by close() should only be used
for either diagnostic purposes or for catching data loss due to a previous
write error, as an error result of close() usually indicates a deferred
error of a previous write operation.
Therefore not decrementing 'total_open_fd' on a close() error is wrong
and would yield in a higher open file descriptor count than actually the
case, leading to 9p server reclaiming open file descriptors too soon.
Based-on: <20250312152933.383967-7-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1tvEyJ-004dMa-So@kylie.crudebyte.com>
Add an futimens operation to the fs driver and use if when a fid has
a valid file descriptor. This is required to support more cases where
the client wants to do an action on an unlinked file which it still
has an open file decriptor for.
Only 9P2000.L was considered.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20250312152933.383967-5-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Add an ftruncate operation to the fs driver and use if when a fid has
a valid file descriptor. This is required to support more cases where
the client wants to do an action on an unlinked file which it still
has an open file decriptor for.
Only 9P2000.L was considered.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20250312152933.383967-4-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
v9fs_getattr() currently peeks into V9fsFidOpenState to know if a fid
has a valid file descriptor or directory stream. Even though the fields
are accessible, this is an implementation detail of the local backend
that should not be manipulated directly by the server code.
Abstract that with a new has_valid_file_handle() backend operation.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20250312152933.383967-3-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Factor out duplicated code to a single helper. More users to come.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20250312152933.383967-2-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This patch fixes two different bugs in v9fs_reclaim_fd():
1. Reduce latency:
This function calls v9fs_co_close() and v9fs_co_closedir() in a loop. Each
one of the calls adds two thread hops (between main thread and a fs driver
background thread). Each thread hop adds latency, which sums up in
function's loop to a significant duration.
Reduce overall latency by open coding what v9fs_co_close() and
v9fs_co_closedir() do, executing those and the loop itself altogether in
only one background thread block, hence reducing the total amount of
thread hops to only two.
2. Fix file descriptor leak:
The existing code called v9fs_co_close() and v9fs_co_closedir() to close
file descriptors. Both functions check right at the beginning if the 9p
request was cancelled:
if (v9fs_request_cancelled(pdu)) {
return -EINTR;
}
So if client sent a 'Tflush' message, v9fs_co_close() / v9fs_co_closedir()
returned without having closed the file descriptor and v9fs_reclaim_fd()
subsequently freed the FID without its file descriptor being closed, hence
leaking those file descriptors.
This 2nd bug is fixed by this patch as well by open coding v9fs_co_close()
and v9fs_co_closedir() inside of v9fs_reclaim_fd() and not performing the
v9fs_request_cancelled(pdu) check there.
Fixes: 7a46274529 ('hw/9pfs: Add file descriptor reclaim support')
Fixes: bccacf6c79 ('hw/9pfs: Implement TFLUSH operation')
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5747469d3f039c53147e850b456943a1d4b5485c.1741339452.git.qemu_oss@crudebyte.com>
Even though this function is serialized to be always called from main
thread, v9fs_reclaim_fd() is dispatching the coroutine to a worker thread
in between via its v9fs_co_*() calls, hence leading to the situation where
v9fs_reclaim_fd() is effectively executed multiple times simultaniously,
which renders its LRU algorithm useless and causes high latency.
Fix this by adding a simple boolean variable to ensure this function is
only called once at a time. No synchronization needed for this boolean
variable as this function is only entered and returned on main thread.
Fixes: 7a46274529 ('hw/9pfs: Add file descriptor reclaim support')
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5c622067efd66dd4ee5eca740dcf263f41db20b2.1741339452.git.qemu_oss@crudebyte.com>
- Added new machine type `ast2700fc` with full core support.
- Defined `Ast2700FCState` structure for the new machine type.
- Implemented initialization functions for CA35, SSP, and TSP components.
- Updated `ast2700fc_types` to include the new machine type.
- Set machine class properties for `ast2700fc`.
Test Step:
- Download ast2700-default-obmc.tar.gz from AspeedTech-BMC OpenBmc
release page.
- Run the following QEMU command:
```
IMGDIR=~/path/to/image
UBOOT_SIZE=$(stat --format=%s -L ${IMGDIR}/u-boot-nodtb.bin)
./qemu-system-aarch64 -machine ast2700fc \
-device loader,force-raw=on,addr=0x400000000,file=${IMGDIR}/u-boot-nodtb.bin \
-device loader,force-raw=on,addr=$((0x400000000 + ${UBOOT_SIZE})),file=${IMGDIR}/u-boot.dtb \
-device loader,force-raw=on,addr=0x430000000,file=${IMGDIR}/bl31.bin \
-device loader,force-raw=on,addr=0x430080000,file=${IMGDIR}/tee-raw.bin \
-device loader,cpu-num=0,addr=0x430000000 \
-device loader,cpu-num=1,addr=0x430000000 \
-device loader,cpu-num=2,addr=0x430000000 \
-device loader,cpu-num=3,addr=0x430000000 \
-device loader,file=${IMGDIR}/ast2700-ssp.elf,cpu-num=4 \
-device loader,file=${IMGDIR}/ast2700-tsp.elf,cpu-num=5 \
-drive file=${IMGDIR}/image-bmc,if=mtd,format=raw \
-serial pty -serial pty -serial pty \
-snapshot \
-S -nographic
```
- After starting QEMU, serial devices will be redirected:
char device redirected to /dev/pts/51 (label serial0)
char device redirected to /dev/pts/52 (label serial1)
char device redirected to /dev/pts/53 (label serial2)
- serial0 is the console for the four Cortex-A35 primary processors,
serial1 and serial2 are the consoles for the two Cortex-M4 coprocessors.
- Connect to the consoles using a terminal emulator.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I32447b9372a78eb53a07135afef59c2a19202328
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-8-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
AST2700 TSP(Tertiary Service Processor) is a Cortex-M4 coprocessor
The patch adds support for TSP with following update:
- Introduce Aspeed27x0TSPSoCState structure in aspeed_soc.h
- Implement initialization and realization functions
- Add support for UART, INTC, and SCU devices
- Map unimplemented devices for IPC and SCUIO
- Defined memory map and IRQ maps for AST27x0 A1 TSP SoC
The IRQ mapping is similar to AST2700 CA35 SoC, featuring a two-level
interrupt controller.
Difference from AST2700:
- AST2700
- Support GICINT128 to GICINT136 in INTC
- The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-tsp
- Support TSPINT128 to TSPINT136 in INTC
- The INTCIO TSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> TSPINT 160
Bit 1 -> TSPINT 161
Bit 2 -> TSPINT 162
Bit 3 -> TSPINT 163
Bit 4 -> TSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I69eec2b68b26ef04187b2922c5f2e584b9076c66
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-7-steven_lee@aspeedtech.com
[ clg: removed local 'Error* err' in aspeed_soc_ast27x0tsp_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The AST2700 SSP (Secondary Service Processor) is a Cortex-M4 coprocessor.
This patch adds support for A1 SSP with the following updates:
- Introduce Aspeed27x0SSPSoCState structure in aspeed_soc.h
- Define memory map and IRQ map for AST27x0 A1 SSP SoC
- Implement initialization and realization functions
- Add support for UART, INTC, and SCU devices
- Map unimplemented devices for IPC and SCUIO
The IRQ mapping is similar to AST2700 CA35 SoC, featuring a two-level
interrupt controller.
Difference from AST2700:
- AST2700
- Support GICINT128 to GICINT136 in INTC
- The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-ssp
- Support SSPINT128 to SSPINT136 in INTC
- The INTCIO SSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> SSPINT 160
Bit 1 -> SSPINT 161
Bit 2 -> SSPINT 162
Bit 3 -> SSPINT 163
Bit 4 -> SSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I924bf1a657f1e83f9e16d6673713f4a06ecdb496
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-6-steven_lee@aspeedtech.com
[ clg: removed local 'Error* err' in aspeed_soc_ast27x0ssp_realize() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
- Define new types for ast2700tsp INTC and INTCIO
- Add register definitions for TSP INTC and INTCIO
- Implement write handlers for TSP INTC and INTCIO
- Register new types in aspeed_intc_register_types
The design of the TSP INTC and INTCIO controllers is similar to
AST2700, with the following differences:
- AST2700
Support GICINT128 to GICINT136 in INTC
The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-tsp
Support TSPINT128 to TSPINT136 in INTC
The INTCIO TSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> TSPINT 160
Bit 1 -> TSPINT 161
Bit 2 -> TSPINT 162
Bit 3 -> TSPINT 163
Bit 4 -> TSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I3f3aca4b90129640369cf4a92deb4b9a12df5b70
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-5-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
- Define new types for ast2700ssp INTC and INTCIO
- Add register definitions for SSP INTC and INTCIO
- Implement write handlers for SSP INTC and INTCIO
- Register new types in aspeed_intc_register_types
The design of the SSP INTC and INTCIO controllers is similar to
AST2700, with the following differences:
- AST2700
Support GICINT128 to GICINT136 in INTC
The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-ssp
Support SSPINT128 to SSPINT136 in INTC
The INTCIO SSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> SSPINT 160
Bit 1 -> SSPINT 161
Bit 2 -> SSPINT 162
Bit 3 -> SSPINT 163
Bit 4 -> SSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: Ib8cb0e264505cef48e17f173e057f3b2d1ea35c4
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-4-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Corrected the hexadecimal notation for several device addresses in the
aspeed_soc_ast2700_memmap array by changing the uppercase 'X' to
lowercase 'x'.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I45426e18ea8e68d7ccdf9b60c4ea235c4da33cc3
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-3-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Maps following unimplemented devices in SoC memory
- dpmcu
- iomem
- iomem0
- iomem1
- ltpi
Iomem, Iomem0 and Iomem1 include unimplemented controllers in the memory ranges 0x0 - 0x1000000, 0x120000000 - 0x121000000 and
0x14000000 - 0x141000000.
For instance:
- USB hub at 0x12010000
- eSPI at 0x14C5000
- PWM at 0x140C0000
DPMCU stands for Display Port MCU controller. LTPI is used to connect to AST1700.
AST1700 is an I/O expander that supports the DC-SCM 2.1 LTPI protocol.
It provides AST2700 with additional GPIO, UART, I3C, and other interfaces.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: Iae4db49a4818af3e2c43c16a27fc76329d2405d6
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-2-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce "aspeed_load_vbootrom()" to support loading a virtual boot ROM image
into the vbootrom memory region, using the "-bios" command-line option.
Introduce a new "vbootrom" field in the AspeedMachineClass to indicate whether
a machine supports the virtual boot ROM region.
Set this field to true by default for the AST2700-A0 and AST2700-A1 EVB
machines.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Tested-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250424075135.3715128-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce a new vbootrom memory region. The region is mapped at address
"0x00000000" and has a size of 128KB, identical to the SRAM region size.
This memory region is intended for loading a vbootrom image file as part of the
boot process.
The vbootrom registered in the SoC's address space using the ASPEED_DEV_VBOOTROM
index.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Nabih Estefan <nabihestefan@google.com>
Tested-by: Nabih Estefan <nabihestefan@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250424075135.3715128-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The variable "sram_name" was only used for naming the SRAM memory region.
Rename it to "name" for consistency with similar code and avoid unnecessary
new local variable declarations.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Nabih Estefan <nabihestefan@google.com>
Link: https://lore.kernel.org/qemu-devel/20250423072350.541742-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
cde3247651 fixed atomicity for LDRD, which
ends up making accesses 64-bits wide. However, the AST2600 bootloader
can sometimes compile with LDRD instructions, which causes the acceses
to fail when accessing the memory-mapped SPI flash.
To fix this, increase the MMIO region valid access size to allow for
64-bit accesses.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250422002747.2593465-1-komlodi@google.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
AST27x0 has 4 EHCI controllers, where each CPU and I/O die has 2
instances. This patch use existing TYPE_PLATFORM_EHCI. After wiring up
the EHCI controller, the ast2700a1-evb can find up to 4 USB EHCI
interfaces.
ehci-platform 12061000.usb: EHCI Host Controller
ehci-platform 12061000.usb: new USB bus registered, assigned bus number 2
ehci-platform 12063000.usb: EHCI Host Controller
ehci-platform 12063000.usb: new USB bus registered, assigned bus number 3
ehci-platform 12061000.usb: irq 88, io mem 0x12061000
ehci-platform 12063000.usb: irq 90, io mem 0x12063000
ehci-platform 14121000.usb: EHCI Host Controller
ehci-platform 14123000.usb: EHCI Host Controller
ehci-platform 12061000.usb: USB 2.0 started, EHCI 1.00
ehci-platform 14121000.usb: new USB bus registered, assigned bus number 5
ehci-platform 14123000.usb: new USB bus registered, assigned bus number 6
ehci-platform 14121000.usb: irq 91, io mem 0x14121000
ehci-platform 14123000.usb: irq 92, io mem 0x14123000
ehci-platform 12063000.usb: USB 2.0 started, EHCI 1.00
usb usb2: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
usb usb3: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
ehci-platform 14121000.usb: USB 2.0 started, EHCI 1.00
usb usb5: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
ehci-platform 14123000.usb: USB 2.0 started, EHCI 1.00
usb usb6: Manufacturer: Linux 6.6.78-dirty-bafd2830c17c-gbafd2830c17c-dirty ehci_hcd
Note that, AST27x0A0 only has 2 EHCI controllers due to hw issue.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250317065938.1902272-2-troy_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This property was added to preserve previous value when this was fixed
in version 2.1 but the last machine using it was already removed when
adding diva-gsp leaving this property unused and unnecessary.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/20250502095524.DE1F355D264@zero.eik.bme.hu
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mc146818rtc's migration stream is at version 3 since commit
56038ef623 ("RTC: Update the RTC clock only when reading it")
from 12 years ago, released in QEMU v1.3.0!
No versioned machines are that old, we can safely remove
support for older streams and the qdev_set_legacy_instance_id()
call.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250115210048.25396-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Extend DIAG308 subcode 10 to return the UVC RC, RRC and command code
in bit positions 32-47, 16-31, and 0-15 of register R1 + 1 if the
function does not complete successfully (in addition to the
previously returned diag response code in bit position 47-63).
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Gautam Gala <ggala@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Message-ID: <20250423080915.1048123-4-ggala@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Replace cpu_list() definition by CPUClass::list_cpus() callback
- Remove few MO_TE definitions on Hexagon / X86 targets
- Remove target_ulong uses in ARMMMUFaultInfo and ARM CPUWatchpoint
- Remove DEVICE_HOST_ENDIAN definition
- Evaluate TARGET_BIG_ENDIAN at compile time and use target_needs_bswap() more
- Rename target_words_bigendian() as target_big_endian()
- Convert target_name() and target_cpu_type() to TargetInfo API
- Constify QOM TypeInfo class_data/interfaces fields
- Get default_cpu_type calling machine_class_default_cpu_type()
- Correct various uses of GLibCompareDataFunc prototype
- Simplify ARM/Aarch64 gdb_get_core_xml_file() handling a bit
- Move device tree files in their own pc-bios/dtb/ subdir
- Correctly check strchrnul() symbol availability on macOS SDK
- Move target-agnostic methods out of cpu-target.c and accel-target.c
- Unmap canceled USB XHCI packet
- Use deposit/extract API in designware model
- Fix MIPS16e translation
- Few missing header fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmgLqb8ACgkQ4+MsLN6t
wN6nCQ//cmv1M+NsndhO5TAK8T1eUSXKlTZh932uro6ZgxKwN4p+j1Qo7bq3O9gu
qUMHNbcfQl8sHSytiXBoxCjLMCXC3u38iyz75WGXuPay06rs4wqmahqxL4tyno3l
1RviFts9xlLn+tJqqrAR6+pRdALld0TY+yXUjXgr4aK5pIRpLz9U/sIEoh7qbA5U
x0MTaceDG3A91OYo0TgrNbcMe1b9GqQZ+a4tbaP+oE37wbiKdyQ68LjrEbV08Y1O
qrFF4oxquV31QJcUiuII1W7hC6psGrMsUA1f1qDu7QvmybAZWNZNsR9T66X9jH5J
wXMShJmmXwxugohmuPPFnDshzJy90aFL6Jy2shrfqcG2v0W66ARY1ZnbJLCcfczt
073bnE2dnOVhd/ny37RrIJNJLLmYM0yFDeKuYtNNAzpK9fpA7Q2PI8QiqNacQ3Pa
TdEYrGlMk7OeNck8xJmJMY5rATthi1D4dIBv3rjQbUolQvPJe2Y9or0R2WL1jK5v
hhr6DY01iSPES3CravmUs/aB1HRMPi/nX45OmFR6frAB7xqWMreh81heBVuoTTK8
PuXtRQgRMRKwDeTxlc6p+zba4mIEYG8rqJtPFRgViNCJ1KsgSIowup3BNU05YuFn
NoPoRayMDVMgejVgJin3Mg2DCYvt/+MBmO4IoggWlFsXj59uUgA=
=DXnZ
-----END PGP SIGNATURE-----
Merge tag 'single-binary-20250425' of https://github.com/philmd/qemu into staging
Various patches loosely related to single binary work:
- Replace cpu_list() definition by CPUClass::list_cpus() callback
- Remove few MO_TE definitions on Hexagon / X86 targets
- Remove target_ulong uses in ARMMMUFaultInfo and ARM CPUWatchpoint
- Remove DEVICE_HOST_ENDIAN definition
- Evaluate TARGET_BIG_ENDIAN at compile time and use target_needs_bswap() more
- Rename target_words_bigendian() as target_big_endian()
- Convert target_name() and target_cpu_type() to TargetInfo API
- Constify QOM TypeInfo class_data/interfaces fields
- Get default_cpu_type calling machine_class_default_cpu_type()
- Correct various uses of GLibCompareDataFunc prototype
- Simplify ARM/Aarch64 gdb_get_core_xml_file() handling a bit
- Move device tree files in their own pc-bios/dtb/ subdir
- Correctly check strchrnul() symbol availability on macOS SDK
- Move target-agnostic methods out of cpu-target.c and accel-target.c
- Unmap canceled USB XHCI packet
- Use deposit/extract API in designware model
- Fix MIPS16e translation
- Few missing header fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmgLqb8ACgkQ4+MsLN6t
# wN6nCQ//cmv1M+NsndhO5TAK8T1eUSXKlTZh932uro6ZgxKwN4p+j1Qo7bq3O9gu
# qUMHNbcfQl8sHSytiXBoxCjLMCXC3u38iyz75WGXuPay06rs4wqmahqxL4tyno3l
# 1RviFts9xlLn+tJqqrAR6+pRdALld0TY+yXUjXgr4aK5pIRpLz9U/sIEoh7qbA5U
# x0MTaceDG3A91OYo0TgrNbcMe1b9GqQZ+a4tbaP+oE37wbiKdyQ68LjrEbV08Y1O
# qrFF4oxquV31QJcUiuII1W7hC6psGrMsUA1f1qDu7QvmybAZWNZNsR9T66X9jH5J
# wXMShJmmXwxugohmuPPFnDshzJy90aFL6Jy2shrfqcG2v0W66ARY1ZnbJLCcfczt
# 073bnE2dnOVhd/ny37RrIJNJLLmYM0yFDeKuYtNNAzpK9fpA7Q2PI8QiqNacQ3Pa
# TdEYrGlMk7OeNck8xJmJMY5rATthi1D4dIBv3rjQbUolQvPJe2Y9or0R2WL1jK5v
# hhr6DY01iSPES3CravmUs/aB1HRMPi/nX45OmFR6frAB7xqWMreh81heBVuoTTK8
# PuXtRQgRMRKwDeTxlc6p+zba4mIEYG8rqJtPFRgViNCJ1KsgSIowup3BNU05YuFn
# NoPoRayMDVMgejVgJin3Mg2DCYvt/+MBmO4IoggWlFsXj59uUgA=
# =DXnZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 25 Apr 2025 11:26:55 EDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'single-binary-20250425' of https://github.com/philmd/qemu: (58 commits)
qemu: Convert target_name() to TargetInfo API
accel: Move target-agnostic code from accel-target.c -> accel-common.c
accel: Make AccelCPUClass structure target-agnostic
accel: Include missing 'qemu/accel.h' header in accel-internal.h
accel: Implement accel_init_ops_interfaces() for both system/user mode
cpus: Move target-agnostic methods out of cpu-target.c
cpus: Replace CPU_RESOLVING_TYPE -> target_cpu_type()
qemu: Introduce target_cpu_type()
qapi: Rename TargetInfo structure as QemuTargetInfo
hw/microblaze: Evaluate TARGET_BIG_ENDIAN at compile time
hw/mips: Evaluate TARGET_BIG_ENDIAN at compile time
target/xtensa: Evaluate TARGET_BIG_ENDIAN at compile time
target/mips: Check CPU endianness at runtime using env_is_bigendian()
accel/kvm: Use target_needs_bswap()
linux-user/elfload: Use target_needs_bswap()
target/hexagon: Include missing 'accel/tcg/getpc.h'
accel/tcg: Correct list of included headers in tcg-stub.c
system/kvm: make functions accessible from common code
meson: Use osdep_prefix for strchrnul()
meson: Share common C source prefixes
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Have target_name() be a target-agnostic method, dispatching
to a per-target TargetInfo singleton structure.
By default a stub singleton is used. No logical change
expected.
Inspired-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424222112.36194-3-philmd@linaro.org>
Various methods of cpu-target.c don't use any target-specific
knowledge at all and can be built once in the target-agnostic
cpu-common.c file.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250417165430.58213-4-philmd@linaro.org>
The QAPI-generated 'TargetInfo' structure name is only used
in a single file. We want to heavily use another structure
similarly named. Rename the QAPI one, since structure names
are not part of the public API.
Suggested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20250422145502.70770-2-philmd@linaro.org>
Rather than evaluating TARGET_BIG_ENDIAN at preprocessing
time via #ifdef'ry, do it in C at compile time
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250417131004.47205-8-philmd@linaro.org>
