Migration relies on having the same device configuration on the source
and destination. Therefore, there is no need to modify flags,
timer capabilities and the fw_cfg HPET block id on migration;
it was set to exactly the same values by realize.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com> (hpet_post_load only)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
=tej8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
# 7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
# fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
# BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
# twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
# XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
# =tej8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Feb 2025 20:21:31 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
docs/devel/reset: Document reset expectations for DMA and IOMMU
hw/vfio/common: Add a trace point in vfio_reset_handler
hw/arm/smmuv3: Move reset to exit phase
hw/i386/intel-iommu: Migrate to 3-phase reset
hw/virtio/virtio-iommu: Migrate to 3-phase reset
vhost-user-snd: correct the calculation of config_size
net: vhost-user: add QAPI events to report connection state
hw/virtio/virtio-nsm: Respond with correct length
vdpa: Fix endian bugs in shadow virtqueue
MAINTAINERS: add more files to `vhost`
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
vhost-iova-tree: Update documentation
vhost-iova-tree, svq: Implement GPA->IOVA & partial IOVA->HVA trees
vhost-iova-tree: Implement an IOVA-only tree
amd_iommu: Use correct bitmask to set capability BAR
amd_iommu: Use correct DTE field for interrupt passthrough
hw/virtio: reset virtio balloon stats on machine reset
mem/cxl_type3: support 3, 6, 12 and 16 interleave ways
hw/mem/cxl_type3: Ensure errp is set on realization failure
hw/mem/cxl_type3: Fix special_ops memory leak on msix_init_exclusive_bar() failure
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To ease the debug of reset sequence, let's add a trace point
in vfio_reset_handler()
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20250218182737.76722-5-eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the iommu may be reset before the devices
it protects. For example this happens with virtio-scsi-pci.
when system_reset is issued from qmp monitor: spurious
"virtio: zero sized buffers are not allowed" warnings can
be observed. This happens because outstanding DMA requests
are still happening while the SMMU gets reset.
This can also happen with VFIO devices. In that case
spurious DMA translation faults can be observed on host.
Make sure the SMMU is reset in the 'exit' phase after
all DMA capable devices have been reset during the 'enter'
or 'hold' phase.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20250218182737.76722-4-eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the IOMMU may be reset before the devices
it protects. For example this happens with virtio devices
but also with VFIO devices. In this latter case this
produces spurious translation faults on host.
Let's use 3-phase reset mechanism and reset the IOMMU on
exit phase after all DMA capable devices have been reset
on 'enter' or 'hold' phase.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20250218182737.76722-3-eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the iommu may be reset before the devices
it protects. For example this happens with virtio-net.
Let's use 3-phase reset mechanism and reset the IOMMU on
exit phase after all DMA capable devices have been
reset during the 'enter' or 'hold' phase.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250218182737.76722-2-eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use virtio_get_config_size() rather than sizeof(struct
virtio_snd_config) for the config_size in the vhost-user-snd frontend.
The frontend shall rely on device features for the size of the device
configuration space. The presence of `controls` in the config space
depends on VIRTIO_SND_F_CTLS according to the specification (v1.3):
`
5.14.4 Device Configuration Layout
...
controls
(driver-read-only) indicates a total number of all available control
elements if VIRTIO_SND_F_CTLS has been negotiated.
`
This fixes an issue introduced by commit ab0c7fb2 ("linux-headers:
update to current kvm/next") in which the optional field `controls` is
added to the virtio_snd_config structure. This breaks vhost-user-device
backends that do not implement the `controls` field.
Fixes: ab0c7fb22b ("linux-headers: update to current kvm/next")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2805
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Matias Ezequiel Vara Larsen <mvaralar@redhat.com>
Message-Id: <20250217131255.829892-1-mvaralar@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Dorinda Bassey <dbassey@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we return a response packet from NSM, we need to indicate its
length according to the content of the response. Prior to this patch, we
returned the length of the source buffer, which may confuse guest code
that relies on the response size.
Fix it by returning the response payload size instead.
Fixes: bb154e3e0c ("device/virtio-nsm: Support for Nitro Secure Module device")
Reported-by: Vikrant Garg <vikrant1garg@gmail.com>
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20250213114541.67515-1-graf@amazon.com>
Reviewed-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Fixes: bb154e3e0c ("device/virtio-nsm: Support for Nitro Secure Module device")<br>
Reported-by: Vikrant Garg <vikrant1garg@gmail.com>
Signed-off-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Vikrant Garg <vikrant1garg@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VDPA didn't work on a big-endian machine due to missing/incorrect
CPU<->LE data format conversions.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Message-Id: <20250212164923.1971538-1-kshk@linux.ibm.com>
Fixes: 10857ec0ad ("vhost: Add VhostShadowVirtqueue")
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Minor update to some of the documentation / comments in
hw/virtio/vhost-iova-tree.c.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20250217144936.3589907-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Creates and supports a GPA->IOVA tree and a partial IOVA->HVA tree by
splitting up guest-backed memory maps and host-only memory maps from the
full IOVA->HVA tree. That is, any guest-backed memory maps are now
stored in the GPA->IOVA tree and host-only memory maps stay in the
IOVA->HVA tree.
Also propagates the GPAs (in_addr/out_addr) of a VirtQueueElement to
vhost_svq_translate_addr() to translate GPAs to IOVAs via the GPA->IOVA
tree (when descriptors are backed by guest memory). For descriptors
backed by host-only memory, the existing partial SVQ IOVA->HVA tree is
used.
GPAs are unique in the guest's address space, ensuring unambiguous IOVA
translations. This avoids the issue where different GPAs map to the same
HVA, causing the original HVA->IOVA translation to potentially return an
IOVA associated with the wrong intended GPA.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20250217144936.3589907-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Creates and supports an IOVA-only tree to support a SVQ IOVA->HVA and
GPA->IOVA tree for host-only and guest-backed memory, respectively, in
the next patch.
The IOVA allocator still allocates an IOVA range but now adds this range
to the IOVA-only tree as well as to the full IOVA->HVA tree.
In the next patch, the full IOVA->HVA tree will be split into a partial
SVQ IOVA->HVA tree and a GPA->IOVA tree. The motivation behind having an
IOVA-only tree was to have a single tree that would keep track of all
allocated IOVA ranges between the partial SVQ IOVA->HVA and GPA->IOVA
trees.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20250217144936.3589907-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
AMD IOMMU provides the base address of control registers through
IVRS table and PCI capability. Since this base address is of 64 bit,
use 32 bits mask (instead of 16 bits) to set BAR low and high.
Fixes: d29a09ca68 ("hw/i386: Introduce AMD IOMMU")
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Message-Id: <20250207045354.27329-3-sarunkod@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Interrupt passthrough is determine by the bits 191,190,187-184.
These bits are part of the 3rd quad word (i.e. index 2) in DTE. Hence
replace dte[3] by dte[2].
Fixes: b44159fe0 ("x86_iommu/amd: Add interrupt remap support when VAPIC is not enabled")
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Message-Id: <20250207045354.27329-2-sarunkod@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When a machine is first booted, all virtio balloon stats are initialized
to their default value -1 (18446744073709551615 when represented as
unsigned).
They remain that way while the firmware is loading, and early phase of
guest OS boot, until the virtio-balloon driver is activated. Thereafter
the reported stats reflect the guest OS activity.
When a machine reset is performed, however, the virtio-balloon stats are
left unchanged by QEMU, despite the guest OS no longer updating them,
nor indeed even still existing.
IOW, the mgmt app keeps getting stale stats until the guest OS starts
once more and loads the virtio-balloon driver (if ever). At that point
the app will see a discontinuity in the reported values as they sudden
jump from the stale value to the new value. This jump is indigituishable
from a valid data update.
While there is an "last-updated" field to report on the freshness of
the stats, that does not unambiguously tell the mgmt app whether the
stats are still conceptually relevant to the current running workload.
It is more conceptually useful to reset the stats to their default
values on machine reset, given that the previous guest workload the
stats reflect no longer exists. The mgmt app can now clearly identify
that there are is no stats information available from the current
executing workload.
The 'last-updated' time is also reset back to 0.
IOW, on every machine reset, the virtio stats are in the same clean
state they were when the macine first powered on.
A functional test is added to validate this behaviour with a real
world guest OS.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20250204094202.2183262-1-berrange@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since the kernel does not check the interleave capability, a
3-way, 6-way, 12-way or 16-way region can be create normally.
Applications can access the memory of 16-way region normally because
qemu can convert hpa to dpa correctly for the power of 2 interleave
ways, after kernel implementing the check, this kind of region will
not be created any more.
For non power of 2 interleave ways, applications could not access the
memory normally and may occur some unexpected behaviors, such as
segmentation fault.
So implements this feature is needed.
Link: https://lore.kernel.org/linux-cxl/3e84b919-7631-d1db-3e1d-33000f3f3868@fujitsu.com/
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250203161908.145406-6-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simply pass the errp to its callee which will set errp if needed, to
enhance error reporting for CXL Type 3 device initialization by setting
the errp when realization functions fail.
Previously, failing to set `errp` could result in errors being overlooked,
causing the system to mistakenly treat failure scenarios as successful and
potentially leading to redundant cleanup operations in ct3_exit().
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250203161908.145406-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Address a memory leak issue by ensuring `regs->special_ops` is freed when
`msix_init_exclusive_bar()` encounters an error during CXL Type3 device
initialization.
Additionally, this patch renames err_address_space_free to err_msix_uninit
for better clarity and logical flow
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250203161908.145406-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msix_uninit_exclusive_bar() should be paired with msix_init_exclusive_bar()
Ensure proper resource cleanup by adding the missing
`msix_uninit_exclusive_bar()` call for the Type3 CXL device.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250203161908.145406-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the `CXL_T3_MSIX_VECTOR` enumeration to specify MSIX vector
assignments specific to the Type 3 (T3) CXL device.
The primary goal of this change is to encapsulate the MSIX vector uses
that are unique to the T3 device within an enumeration, improving code
readability and maintenance by avoiding magic numbers. This organizational
change allows for more explicit references to each vector’s role, thereby
reducing the potential for misconfiguration.
It also modified `mailbox_reg_init_common` to accept the `msi_n` parameter,
reflecting the new MSIX vector setup.
This pertains to the T3 device privately; other endpoints should refrain from
using it, despite its public accessibility to all of them.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250203161908.145406-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU currently crashes when you try to inspect the properties of the
microvm machine:
$ echo '{ "execute": "qmp_capabilities" }
{ "execute": "qom-list-properties","arguments":
{ "typename": "microvm-machine"}}' | \
./qemu-system-x86_64 -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 9},
"package": "v9.2.0-1072-g60af367187-dirty"}, "capabilities": ["oob"]}}
{"return": {}}
qemu-system-x86_64: ../qemu/hw/i386/acpi-microvm.c:250:
void acpi_setup_microvm(MicrovmMachineState *):
Assertion `x86ms->fw_cfg' failed.
Aborted (core dumped)
This happens because the microvm machine adds a machine_done (and a
powerdown_req) notifier in their instance_init function - however, the
instance_init of machines are not only called for machines that are
realized, but also for machines that are introspected, so in this case
the listener is added for a microvm machine that is never realized. And
since there is already a running machine, the listener function is
triggered immediately, causing a crash since it was not for the right
machine it was meant for.
Such listener functions must never be installed from an instance_init
function. Let's do it from microvm_machine_state_init() instead - this
function is the MachineClass->init() function instead, i.e. guaranteed
to be only called once in the lifetime of a QEMU process.
Since the microvm_machine_done() and microvm_powerdown_req() were
defined quite late in the microvm.c file, we have to move them now
also earlier, so that we can get their function pointers from
microvm_machine_state_init() without having to introduce a separate
prototype for those functions earlier.
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250123204708.1560305-1-thuth@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU currently crashes when you try to inspect the machines based on
TYPE_PC_MACHINE for their properties:
$ echo '{ "execute": "qmp_capabilities" }
{ "execute": "qom-list-properties","arguments":
{ "typename": "pc-q35-10.0-machine"}}' \
| ./qemu-system-x86_64 -M pc -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 9},
"package": "v9.2.0-1070-g87e115c122-dirty"}, "capabilities": ["oob"]}}
{"return": {}}
Segmentation fault (core dumped)
This happens because TYPE_PC_MACHINE machines add a machine_init-
done_notifier in their instance_init function - but instance_init
of machines are not only called for machines that are realized,
but also for machines that are introspected, so in this case the
listener is added for a q35 machine that is never realized. But
since there is already a running pc machine, the listener function
is triggered immediately, causing a crash since it was not for the
right machine it was meant for.
Such listener functions must never be installed from an instance_init
function. Let's do it from pc_basic_device_init() instead - this
function is called from the MachineClass->init() function instead,
i.e. guaranteed to be only called once in the lifetime of a QEMU
process.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2779
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250117192106.471029-1-thuth@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nothing should be doing this, but it doesn't get caught by
pci_register_bar(). Add an assertion to prevent misuse.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20250117172842.406338-3-npiggin@gmail.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Of the MSI-X PBA pending bits, the PCI Local Bus Specification says:
Software should never write, and should only read
Pending Bits. If software writes to Pending Bits, the
result is undefined.
Log a GUEST_ERROR message if the PBA is written to by software.
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Cc: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20250117172842.406338-2-npiggin@gmail.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcie_sriov doesn't have code to restore its state after migration, but
igb, which uses pcie_sriov, naively claimed its migration capability.
Add code to register VFs after migration and fix igb migration.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-11-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
num_vfs is not migrated so use PCI_SRIOV_CTRL_VFE and PCI_SRIOV_NUM_VF
instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-10-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Release VFs failed to realize just as we do in unregister_vfs().
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-9-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable SR-IOV VF devices by reusing code to power down PCI devices
instead of removing them when the guest requests to disable VFs. This
allows to realize devices and report VF realization errors at PF
realization time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-8-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() aborts when creating a VF with addr >= PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-7-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device gets automatically unrealized when being unparented.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-6-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The SR-IOV PFs set the multifunction bit during device realization so
check them after that. There is no functional change because we
explicitly ignore the multifunction bit for SR-IOV devices.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-5-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The guest cannot use VFs due to the lack of multifunction support but
can use PFs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-4-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VFs are automatically created by PF, and creating zpci for them will
result in unexpected usage of fids. Currently QEMU does not support
multifunction for s390x so we don't need zpci for VFs anyway.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-3-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A PF may automatically create VFs and the PF may be function 0.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <20250116-reuse-v20-2-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disabled means it is a disabled SR-IOV VF and hidden from the guest.
Do not create DT when starting the system and also keep the disabled PCI
device not linked to DRC, which generates DT in case of hotplug.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Shivaprasad G Bhat<sbhat@linux.ibm.com>
Tested-by: Shivaprasad G Bhat<sbhat@linux.ibm.com>
Message-Id: <20250116-reuse-v20-1-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When an eBPF program cannot be attached, virtio_net_load_ebpf() returns
false, and virtio_net_device_realize() enters the code path to handle
errors because of this, but it causes NULL dereference because no error
is generated.
Change virtio_net_load_ebpf() to return false only when a fatal error
occurred.
Fixes: b5900dff14 ("hw/net: report errors from failing to use eBPF RSS FDs")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-software-v1-1-9e5161b534d8@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
NPCM8XX SoC is the successor of the NPCM7XX. It features quad-core
Cortex-A35 (Armv8, 64-bit) CPUs and some additional peripherals.
This document describes the NPCM8XX SoC and an evaluation board
(NPCM 845 EVB).
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250219184609.1839281-18-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PCS exists in NPCM8XX's GMAC1 and is used to control the SGMII
PHY. This implementation contains all the default registers and
the soft reset feature that are required to load the Linux kernel
driver. Further features have not been implemented yet.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250219184609.1839281-15-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM8XX adds a few new registers and have a different set of reset
values to the CLK modules. This patch supports them.
This patch doesn't support the new clock values generated by these
registers. Currently no modules use these new clock values so they
are not necessary at this point.
Implementation of these clocks might be required when implementing
these modules.
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-14-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These 2 values are different between NPCM7XX and NPCM8XX
CLKs. So we add them to the class and assign different values
to them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-13-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of NPCM7XX and NPCM8XX CLK modules share the same code,
this commit moves the NPCM7XX CLK to NPCM CLK for these
properties.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-12-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM7XX and NPCM8XX have a different set of CLK registers. This
commit changes the name of the clk files to be used by both
NPCM7XX and NPCM8XX CLK modules.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-11-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The NPCM8xx GCR device can be accessed with 64-bit memory operations.
This patch supports that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Message-id: 20250219184609.1839281-10-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM8XX boot block stores the DRAM size in SCRPAD_B register in GCR
module. Since we don't simulate a detailed memory controller, we
need to store this information directly similar to the NPCM7XX's
INCTR3 register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-9-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These 2 values are different between NPCM7XX and NPCM8XX
GCRs. So we add them to the class and assign different values
to them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-7-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of NPCM7XX and NPCM8XX GCR modules share the same code,
this commit moves the NPCM7XX GCR to NPCM GCR for these
properties.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-6-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM7XX and NPCM8XX have a different set of GCRs and the GCR module
needs to fit both. This commit changes the name of the GCR module.
Future commits will add the support for NPCM8XX GCRs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-5-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
