The PCS exists in NPCM8XX's GMAC1 and is used to control the SGMII
PHY. This implementation contains all the default registers and
the soft reset feature that are required to load the Linux kernel
driver. Further features have not been implemented yet.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250219184609.1839281-15-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM8XX adds a few new registers and have a different set of reset
values to the CLK modules. This patch supports them.
This patch doesn't support the new clock values generated by these
registers. Currently no modules use these new clock values so they
are not necessary at this point.
Implementation of these clocks might be required when implementing
these modules.
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-14-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These 2 values are different between NPCM7XX and NPCM8XX
CLKs. So we add them to the class and assign different values
to them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-13-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of NPCM7XX and NPCM8XX CLK modules share the same code,
this commit moves the NPCM7XX CLK to NPCM CLK for these
properties.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-12-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM7XX and NPCM8XX have a different set of CLK registers. This
commit changes the name of the clk files to be used by both
NPCM7XX and NPCM8XX CLK modules.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-11-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM8XX boot block stores the DRAM size in SCRPAD_B register in GCR
module. Since we don't simulate a detailed memory controller, we
need to store this information directly similar to the NPCM7XX's
INCTR3 register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-9-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These 2 values are different between NPCM7XX and NPCM8XX
GCRs. So we add them to the class and assign different values
to them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-7-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of NPCM7XX and NPCM8XX GCR modules share the same code,
this commit moves the NPCM7XX GCR to NPCM GCR for these
properties.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-6-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM7XX and NPCM8XX have a different set of GCRs and the GCR module
needs to fit both. This commit changes the name of the GCR module.
Future commits will add the support for NPCM8XX GCRs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-5-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows different FIUs to have different flash sizes, useful
in NPCM8XX which has multiple different sized FIU modules.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Message-id: 20250219184609.1839281-4-wuhaotsh@google.com
[PMM: flash_size must be a uint64_t to build on 32-bit hosts]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the EndianMode type and the DEFINE_PROP_ENDIAN() macros.
Endianness can be BIG, LITTLE or unspecified (default).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-2-philmd@linaro.org>
Invert the 'no_sdcard' logic, renaming it as the more explicit
"auto_create_sdcard". Machines are supposed to create a SD Card
drive when this flag is set. In many cases it doesn't make much
sense (as boards don't expose SD Card host controller), but this
is patch only aims to expose that nonsense; so no logical change
intended (mechanical patch using gsed).
Most of the changes are:
- mc->no_sdcard = ON_OFF_AUTO_OFF;
+ mc->auto_create_sdcard = true;
Except in
. hw/core/null-machine.c
. hw/arm/xilinx_zynq.c
. hw/s390x/s390-virtio-ccw.c
where the disabled option is manually removed (since default):
- mc->no_sdcard = ON_OFF_AUTO_ON;
+ mc->auto_create_sdcard = false;
- mc->auto_create_sdcard = false;
and in system/vl.c we change the 'default_sdcard' type to boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-4-philmd@linaro.org>
MachineClass::no_sdcard is initialized as false by default.
To catch all uses, convert it to a tri-state, having the
current default (false) becoming AUTO.
No logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-2-philmd@linaro.org>
Because the legacy Xen backend devices can optionally be plugged on the
TYPE_PLATFORM_BUS_DEVICE, have it inherit TYPE_DYNAMIC_SYS_BUS_DEVICE.
Remove the implicit TYPE_XENSYSDEV instance_size.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20250125181343.59151-10-philmd@linaro.org>
Some TYPE_SYS_BUS_DEVICEs can be optionally dynamically
plugged on the TYPE_PLATFORM_BUS_DEVICE.
Rather than sometimes noting that with comment around
the 'user_creatable = true' line in each DeviceRealize
handler, introduce an abstract TYPE_DYNAMIC_SYS_BUS_DEVICE
class.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250125181343.59151-4-philmd@linaro.org>
HPET device needs to access and update hpet_cfg variable, but now it is
defined in hw/i386/fw_cfg.c and Rust code can't access it.
Move hpet_cfg definition to hpet.c (and rename it to hpet_fw_cfg). This
allows Rust HPET device implements its own global hpet_fw_cfg variable,
and will further reduce the use of unsafe C code access and calls in the
Rust HPET implementation.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250210030051.2562726-2-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ6wQngAKCRAfewwSUazn
0SggAQDk5mp90dBJwu05kioq+Inx/bwxmamweA+FmeqAnoQ79QEApDBPfppkrN2y
AxNZL0EL5zRFU3zECSTevpRMQ3UoVQk=
=tLFD
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250212' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ6wQngAKCRAfewwSUazn
# 0SggAQDk5mp90dBJwu05kioq+Inx/bwxmamweA+FmeqAnoQ79QEApDBPfppkrN2y
# AxNZL0EL5zRFU3zECSTevpRMQ3UoVQk=
# =tLFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Feb 2025 22:08:14 EST
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250212' of https://gitlab.com/bibo-mao/qemu:
hw/loongarch/virt: CPU irq line connection improvement
hw/loongarch/virt: Remove unused ipistate
hw/loongarch/virt: Set iocsr address space when CPU is created
hw/loongarch/virt: Add separate file for fdt building
hw/loongarch/virt: Rename function prefix name
hw/loongarch/virt: Rename filename acpi-build with virt-acpi-build
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Interrupt controller extioi and ipi connect to CPU with irq line method.
With command -smp x, -device la464-loongarch-cpu, smp.cpus is not
accurate for all possible CPU objects, possible_cpu_arch_ids() is used.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Similiar with virt-acpi-build.c, file virt-fdt-build.c is added here.
And move functions relative with fdt table building to the file.
It is only code movement and there is no function change.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replace function prefix name loongarch_xxx with virt_xxx in file
virt-acpi-build.c
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This helper will be useful in the listener handlers to extract the
VFIO device from a memory region using memory_region_owner(). At the
moment, we only care for PCI passthrough devices. If the need arises,
we will add more.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250206131438.1505542-5-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In heterogeneous setup the first vCPU might not be
the one expected, better pass it explicitly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20250130112615.3219-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Each Astro on 64-bit machines supports up to four LMMIO regions.
Those regions are used by graphic cards and other PCI devices which
need to map huge memory areas. The LMMIO regions are configured and
set up by SeaBIOS-hppa and then used as-is by the operating systems
(Linux, HP-UX).
With this addition it's now possible to add other PCI graphic
cards on the command line, e.g. with "-device ati-vga".
Signed-off-by: Helge Deller <deller@gmx.de>
The sdcard_legacy.h header defines function prototypes for the "legacy"
SD card API, which was used by non-qdevified SD controller models.
We've now converted the only remaining non-qdev SD controller, so
we can drop the legacy API.
Entirely unused functions:
sd_init(), sd_set_cb(), sd_enable()
Functions which now become static inside sd.c (they are the
underlying implementations of methods on SDCardClass):
sd_do_command(), sd_write_byte(), sd_read_byte()
Removal of sd_init() means that we can also remove the
me_no_qdev_me_kill_mammoth_with_rocks flag, the codepaths that were
only reachable when it was set, and the inserted_cb and readonly_cb
qemu_irq lines that went with that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250128104519.3981448-11-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The SDCardClass has an 'enable' method, but nothing actually invokes it.
The underlying implementation is sd_enable(), which is documented
in sdcard_legacy.h as something that should not be used and was only
present for the benefit of the now-removed nseries boards. Unlike
all the other method pointers in SDCardClass, this one doesn't have
an sdbus_foo() function wrapper in hw/sd/core.c.
Remove the unused method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-10-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The approach we've settled on for handling the omap_clk wiring for
OMAP devices converted to QDev is to have a function omap_foo_set_clk()
whose implementation just sets the field directly in the device's
state struct. (See the "TODO" comment near the top of omap.h.)
Make omap_mmc do the same.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the OMAP MMC controller to the new SDBus API:
* the controller creates an SDBus bus
* instead of sd_foo functions on the SDState object, call
sdbus_foo functions on the SDBus
* the board code creates a proper TYPE_SD_CARD object and attaches
it to the controller's SDBus, instead of the controller creating
a card directly via sd_init() that never gets attached to any bus
* because the SD card object is on a bus, it gets reset automatically
by the "traverse the qbus tree resetting things" code, and we don't
need to manually reset the card from the controller reset function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-5-peter.maydell@linaro.org>
[PMD: Include "hw/sd/sd.h" instead of "hw/sd/sdcard_legacy.h",
create bus in omap_mmc_initfn() instead of omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Mechanically convert the remaining uses of 'struct omap_mmc_s' to
'OMAPMMCState'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Do a minimal conversion of the omap_mmc device model to QDev.
In this commit we do the bare minimum to produce a working device:
* add the SysBusDevice parent_obj and the usual type boilerplate
* omap_mmc_init() now returns a DeviceState*
* reset is handled by sysbus reset, so the SoC reset function
doesn't need to call omap_mmc_reset() any more
* code that should obviously be in init/realize is moved there
from omap_mmc_init()
We leave various pieces of cleanup to later commits:
* rationalizing 'struct omap_mmc_s *' to 'OMAPMMCState *'
* using gpio lines rather than having omap_mmc_init() directly
set s->irq, s->dma
* switching away from the legacy SD API and instead having
the SD card plugged into a bus
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-2-peter.maydell@linaro.org>
[PMD: Do not add omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
TARGET_BIG_ENDIAN -> TARGET_BIG_ENDIAN ? ELFDATA2MSB : ELFDATA2LSB
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-7-philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
Note, this allow removing the target_words_bigendian() call
in the GENERIC_LOADER device, where we pass ELFDATANONE.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-6-philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-5-philmd@linaro.org>
Last use of load_elf_ram() was removed in commit 188e255bf8
("hw/s390x: Remove the possibility to load the s390-netboot.img
binary"), remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20250127113824.50177-3-philmd@linaro.org>
No need to dynamically allocate IRQ when we know before hands
how many we'll use. Declare the 2 of them in IPackDevice state
and initialize them in the DeviceRealize handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121155526.29982-4-philmd@linaro.org>
While qemu_init_irq() initialize a single IRQ,
qemu_init_irqs() initialize an array of them.
Suggested-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121155526.29982-2-philmd@linaro.org>
- Purge of ram_save_target_page_legacy
- Cleanups to postcopy, json writer, migration states
- New migration mode cpr-transfer
- Fix for a -Werror=maybe-uninitialized instance in savevm
-----BEGIN PGP SIGNATURE-----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=jwOI
-----END PGP SIGNATURE-----
Merge tag 'migration-20250129-pull-request' of https://gitlab.com/farosas/qemu into staging
Migration pull request
- Purge of ram_save_target_page_legacy
- Cleanups to postcopy, json writer, migration states
- New migration mode cpr-transfer
- Fix for a -Werror=maybe-uninitialized instance in savevm
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmeaT8EQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxndXrEACTT+rdoEvOsNs4nM2a67GjxUoQZVTAWn+8
# lYhhNZLA4E+qHwpHTDCwyfyvCe615r72+bF7QO1KTrYeXGJg4SPk5kbEhCDqqjEu
# SGqrlPwkC1x3WkTvb228iDddDQ8dccko3Sy6wAyz0o8dtp5p4iK+57qzB/84u94L
# y3zQ+owOo9OLnXgdfMpN99HGQSvPR7CbP/2L293IrMCuPDUo9XhI7ARNS/phbT3Z
# aDl10WGHKz1SJWOkPj137E6+xMKuCmOZDTufTcTaHfyliD04JRWgEZVnKJxKJDxd
# 9e+lzHvXuYfO7YO11fr7DttPRnLEfjipELVTxrudM92eZ95XwdL4+ggfBTGHt76P
# yFUrp7G8qsUjWd+DHPmoo6Gx71zPbE6v9J2NMn2/1k4WdPOYy7HTmDgCkRirRTvV
# irYkHtdSFFsj3c0g4P4mhOzXnvUkGXzgrjteM5hlLy3bjSeZz9VMZADjiGqFGVPb
# 6euPcLLa9oynkoP5UXmFd/9PjWcgnfIbQu2MVlIyWhjvTGZKSGecVZmH5pWTJuBV
# xCbab1jYprRFpUIAMo94rgvRQRosomS1+GjGndFkX5++dTTlFSqpDLSGcEnPSGRx
# o9n+IldNiqh2vjN1bj60pLfmrHN/F+hsGTsDJlW+kfeyBXBkGArg1rDjN5ae7GvD
# UZK0N+OG0g==
# =jwOI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 29 Jan 2025 10:56:49 EST
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'migration-20250129-pull-request' of https://gitlab.com/farosas/qemu: (42 commits)
migration: refactor ram_save_target_page functions
migration: Trivial cleanup on JSON writer of vmstate_save()
migration: Merge precopy/postcopy on switchover start
migration: Always set DEVICE state
migration: Cleanup qemu_savevm_state_complete_precopy()
migration: Unwrap qemu_savevm_state_complete_precopy() in postcopy
migration: Notify COMPLETE once for postcopy
migration: Take BQL slightly longer in postcopy_start()
migration: Drop cached migration state in migration_maybe_pause()
migration: Adjust locking in migration_maybe_pause()
migration: Adjust postcopy bandwidth during switchover
migration: Synchronize all CPU states only for non-iterable dump
migration: Drop inactivate_disk param in qemu_savevm_state_complete*
migration: Avoid two src-downtime-end tracepoints for postcopy
migration: Optimize postcopy on downtime by avoiding JSON writer
migration: Do not construct JSON description if suppressed
migration: Remove postcopy implications in should_send_vmdesc()
migration: cpr-transfer documentation
migration-test: cpr-transfer
tests/qtest: assert qmp connected
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We removed the implementations in commit 46a2bd5257
("hw/i386/pc: Remove deprecated pc-i440fx-2.3 machine")
but forgot to remove the declarations. Do it now.
Fixes: 46a2bd5257 ("hw/i386/pc: Remove deprecated pc-i440fx-2.3 machine")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Per [*]:
"we're only interested in adopting SPDX for recording the
licensing info, [not] any other SPDX metadata."
Replace the 'SPDX-FileCopyrightText' and 'SPDX-FileContributor'
tags added by Linaro by 'Copyright (c)' and 'Authors' words
respectively.
[*] https://lore.kernel.org/qemu-devel/20241007154548.1144961-4-berrange@redhat.com/
Inspired-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
-----BEGIN PGP SIGNATURE-----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=H4p7
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmeZOi0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3sUeEACwDhM4ldn/gVZgVN7nf42a
# /CLD/qJx1vqi5bAB5zkY1bSCR9hS2IkhTBoQQH9Ng6ztG1IRpT/tKXDJAemWty70
# XgExdl4yjdwXMQK4JKU9qSfaBTuX7Z8Hz+nA1AnblO/4H+XpVNVJzp8Ee/uWTyEd
# BKPBpwqbIXNwUWEqkzDok074Q05rHlhsJD2DsoJTcmtpROhLHLATwQDZGGFuf56H
# LVcdx6GRP+/mWEGWLtj19mvaR/2cn4rQf+I1MACZ81nRjQCHbCohNAMr2wFsKg1+
# 2jYk9uHdFoambJ5+mFuC55Efk+QJaP4vDR0Gf3jLloFr+rS/5h3HiUuD8dUWOwFd
# mPWXsjwYzqBW2knt1nfq1ByzYWZ8rVQEn5G53dX/eoNXuDGsonZxPnevgmv5kIUc
# /W618Jez1nu9RDtNKccobHEtTGlGInJxJ7YzkU7Q6FO80IAqSdV7t9v7uPLJwcnz
# nQz+wVzb4oOmwMzn3BpKY7N/S7IZOSy3ASNHj8o4yCHMJT8Ki0/N4bl0k0DLxJ0T
# RiNCsV9c7MJfo9a+pbOnu0Lc3SjjropdvHYU+bB7R0mgd8ysN+Tou0dpa+i7tUTu
# DHWqs2/+UApHKBiC+DSynPjjRR2aT/5lYFncGaiEVoEQttPLka3SAzgHPVQZs1zD
# bxZkEAFktAFGIjU70fYNkg==
# =H4p7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 Jan 2025 15:12:29 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits)
hw/usb/canokey: Fix buffer overflow for OUT packet
target/arm: Use FPST_A64_F16 for halfprec-to-other conversions
target/arm: Remove redundant advsimd float16 helpers
fpu: Fix a comment in softfloat-types.h
fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
target/arm: Remove now-unused vfp.fp_status_f16 and FPST_FPCR_F16
target/arm: Use FPST_A64_F16 in A64 decoder
target/arm: Use FPST_A32_F16 in A32 decoder
target/arm: Use fp_status_f16_a64 in AArch64-only helpers
target/arm: Use fp_status_f16_a32 in AArch32-only helpers
target/arm: Define new fp_status_f16_a32 and fp_status_f16_a64
target/arm: Remove now-unused vfp.fp_status and FPST_FPCR
target/arm: Use FPST_A64 in A64 decoder
target/arm: Use FPST_A32 in A32 decoder
target/arm: Use fp_status_a32 in vfp_cmp helpers
target/arm: Use fp_status_a32 in vjvct helper
target/arm: Use fp_status_a64 or fp_status_a32 in is_ebf()
target/arm: Use vfp.fp_status_a64 in A64-only helper functions
target/arm: Define new fp_status_a32 and fp_status_a64
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allocate auxilliary guest RAM as an anonymous file that is shareable
with an external process. This option applies to memory allocated as
a side effect of creating various devices. It does not apply to
memory-backend-objects, whether explicitly specified on the command
line, or implicitly created by the -m command line option.
This option is intended to support new migration modes, in which the
memory region can be transferred in place to a new QEMU process, by sending
the memfd file descriptor to the process. Memory contents are preserved,
and if the mode also transfers device descriptors, then pages that are
locked in memory for DMA remain locked. This behavior is a pre-requisite
for supporting vfio, vdpa, and iommufd devices with the new modes.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1736967650-129648-7-git-send-email-steven.sistare@oracle.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Fixes INTD and MSI interrupts poking the same IRQ line without keeping track of
each other's IRQ level. Furthermore, SoCs such as the i.MX 8M Plus don't share
the MSI IRQ with the INTx lines, so expose it as a dedicated pin.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The value of the UCFR register is respected when echoing characters to the
terminal, but its reset value is reserved. Fix the reset value to the one
documented in the datasheet.
While at it move the related attribute out of the section of unimplemented
registers since its value is actually respected.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv7MState object is not simply a CPU, it also
contains the NVIC, SysTick timer, and various MemoryRegions.
Rename the field as 'armv7m', like other Cortex-M boards.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The timer controller include 8 sets of 32-bit decrement counters, based on
either PCLK or 1MHZ clock and the design of timer controller between AST2600
and AST2700 are almost the same.
TIMER0 – TIMER7 has their own individual control and interrupt status register.
In other words, users are able to set timer control in register TMC10 with
different TIMER base address and clear timer control and interrupt status in
register TMC14 with different TIMER base address.
Introduce new "aspeed_2700_timer_read" and "aspeed_2700_timer_write" callback
functions and a new ast2700 class to support AST2700.
The base address of TIMER0 to TIMER7 as following.
Base Address of Timer 0 = 0x12C1_0000
Base Address of Timer 1 = 0x12C1_0040
Base Address of Timer 2 = 0x12C1_0080
Base Address of Timer 3 = 0x12C1_00C0
Base Address of Timer 4 = 0x12C1_0100
Base Address of Timer 5 = 0x12C1_0140
Base Address of Timer 6 = 0x12C1_0180
Base Address of Timer 7 = 0x12C1_01C0
The register address space of each TIMER is "0x40" , and uses the following
formula to get the index and register of each TIMER.
timer_index = offset >> 6;
timer_offset = offset & 0x3f;
The TMC010 is a counter control set and interrupt status register. Write "1" to
TMC10[3:0] will set the specific bits to "1". Introduce a new
"aspeed_2700_timer_set_ctrl" function to handle this register behavior.
The TMC014 is a counter control clear and interrupt status register, to clear
the specific bits to "0", it should write "1" to TMC14[3:0] on the same bit
position. Introduce a new "aspeed_2700_timer_clear_ctrl" function to handle
this register behavior. TMC014 does not support read operation.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20250113064455.1660564-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The Write Protect pin of SDHCI model is default active low to match the SDHCI
spec. So, write enable the bit 19 should be 1 and write protected the bit 19
should be 0 at the Present State Register (0x24).
According to the design of AST2600 EVB, the Write Protected pin is active
high by default. To support it, introduces a new "sdhci_wp_inverted"
property in ASPEED MACHINE State and set it true for AST2600 EVB
and set "wp_inverted" property true of sdhci-generic model.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241114094839.4128404-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
