Move the global function name to a hook on TCGCPUOps.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Combine 3 different pointer returns into one structure return.
Include a cflags field in TCGTBCPUState, not filled in by
cpu_get_tb_cpu_state, but used by all callers. This fills
a hole in the structure and is useful in some subroutines.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is only relevant to tcg.
Move it to a tcg-specific file.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For some targets, simply remove the local definition.
For other targets, move the inline definition out of line.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Initialize all instances with cpu_reset(), so that there
is no functional change.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"exec/exec-all.h" is now fully empty, let's remove it.
Mechanical change running:
$ sed -i '/exec\/exec-all.h/d' $(git grep -wl exec/exec-all.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-14-philmd@linaro.org>
Declare probe methods in "accel/tcg/probe.h" to emphasize
they are specific to TCG accelerator.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-13-philmd@linaro.org>
"accel/tcg/getpc.h" is pulled in indirectly. Include it
explicitly to avoid when refactoring unrelated headers:
target/riscv/csr.c:2117:25: error: call to undeclared function 'GETPC' [-Wimplicit-function-declaration]
2117 | if ((val & RVC) && (GETPC() & ~3) != 0) {
| ^
Note the TODO comment around GETPC() added upon introduction in
commit f18637cd61 ("RISC-V: Add misa runtime write support"):
2099 static RISCVException write_misa(CPURISCVState *env, int csrno,
2100 target_ulong val)
2101 {
...
2113 /*
2114 * Suppress 'C' if next instruction is not aligned
2115 * TODO: this should check next_pc
2116 */
2117 if ((val & RVC) && (GETPC() & ~3) != 0) {
2118 val &= ~RVC;
2119 }
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-8-philmd@linaro.org>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
A few functions now end with a label. The next commit will clean them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-3-armbru@redhat.com>
[Straightforward conflict with commit 988ad4cceb (hw/loongarch/virt:
Fix cpuslot::cpu set at last in virt_cpu_plug()) resolved]
Instead of having a compile-time TARGET_SUPPORTS_MTTCG definition,
have each target set the 'mttcg_supported' field in the TCGCPUOps
structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250405161320.76854-17-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expose riscv_tcg_ops symbol, then directly set it as
CPUClass::tcg_ops in TYPE_RISCV_CPU's class_init(),
using CONFIG_TCG #ifdef'ry. No need for the
AccelCPUClass::cpu_class_init() handler anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250405161320.76854-2-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu_tcg_mttcg_enabled() is specific to 1/ TCG and
2/ system emulation. Move the prototype declaration
to "system/tcg.h", reducing 'mttcg_enabled' variable
scope.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250403220420.78937-17-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By directly using TCGCPUOps::guest_default_memory_order,
we don't need the TCG_GUEST_DEFAULT_MO definition anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the TCGCPUOps::guest_default_memory_order field and have
each target initialize it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To avoid including the huge "cpu.h" for a simple definition,
move TARGET_INSN_START_EXTRA_WORDS to "cpu-param.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As Richard mentioned:
We should allow RV128 in user-mode at all until there's a
kernel abi for it.
Remove the experimental 'x-rv128' CPU on user emulation
(since it is experimental, no deprecation period is required).
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We include this header where needed. When includes set already have
ifdef CONFIG_USER_ONLY, we add it here, else, we don't condition the
include.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250325045915.994760-5-pierrick.bouvier@linaro.org>
Move riscv_cpu_mmu_index() to the TCG-specific file,
convert CPUClass::mmu_index() to TCGCPUOps::mmu_index().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250401080938.32278-17-philmd@linaro.org>
While RISCVCPUConfig.satp_mode is unused for user-only,
this header is used from disas/riscv.h, whose users are
only built once. The savings of 4 bytes isn't worth it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split icount stuff from system/cpu-timers.h.
There are 17 files which only require icount.h, 7 that only
require cpu-timers.h, and 7 that require both.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Relatively few objects in qemu care about watchpoints, so split
out to a new header. Removes an instance of CONFIG_USER_ONLY
from hw/core/cpu.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit breaks KVM boot on older kernels, like reported in [1], due
to senvcfg not being available in them.
There's also another problem related to scounteren. Using a recent
enough guest buildroot, 'ping' will be build with rdtime support. In
this case, doing a ping in a KVM guest while exposing scounteren will
result in an error. The root cause relates to how KVM handles
scounteren, but QEMU can work around it by initializing scounteren with
the host value during init().
Fixing these issues in a non-rushed-bandaid manner results in an amount
of design changes that I don't feel comfortable pushing during code
freeze, so for 10.0 we'll remove the CSRs and re-introduce them in 10.1
with the adequate support.
This reverts commit 4db19d5b21.
[1] https://lore.kernel.org/qemu-riscv/CABJz62OfUDHYkQ0T3rGHStQprf1c7_E0qBLbLKhfv=+jb0SYAw@mail.gmail.com/
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250327152052.707657-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For privilege version 1.12 or newer, C always implies Zca. We can only
check ext_zca to allow 16-bit aligned PC addresses. For older privilege
versions, we only check C.
Signed-off-by: Yu-Ming Chang <yumin686@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <174184718265.10540.10120024221661781046-0@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Recently, when I was writing a RISCV test, I found that when VL is set to 0, the
instruction should be nop, but when I tested it, I found that QEMU will treat
all elements as tail elements, and in the case of VTA=1, write all elements
to 1.
After troubleshooting, it was found that the vext_vx_rm_1 function was called in
the vext_vx_rm_2, and then the vext_set_elems_1s function was called to process
the tail element, but only VSTART >= vl was checked in the vext_vx_rm_1
function, which caused the tail element to still be processed even if it was
returned in advance.
So I've made the following change:
Put VSTART_CHECK_EARLY_EXIT(env) at the beginning of the vext_vx_rm_2 function,
so that the VSTART register is checked correctly.
Fixes: df4252b2ec ("target/riscv/vector_helpers: do early exit when
vstart >= vl")
Signed-off-by: Chao Liu <lc00631@tecorigin.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <b2649f14915150be4c602d63cd3ea4adf47e9d75.1741573286.git.lc00631@tecorigin.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some vector instructions are special, such as the vlm.v instruction,
where setting its vl actually sets evl = (vl + 7) >> 3. To improve
maintainability, we will uniformly use VSTART_CHECK_EARLY_EXIT() to
check for the condition vstart >= vl. This function will also handle
cases involving evl.
Fixes: df4252b2ec ("target/riscv/vector_helpers: do early exit when
vstart >= vl")
Signed-off-by: Chao Liu <lc00631@tecorigin.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <f575979874e323a9e0da7796aa391c7d87e56f88.1741573286.git.lc00631@tecorigin.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Coverity found the following issue:
>>> CID 1593156: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
>>> Potentially overflowing expression "0x10 << depth" with type
"int" (32 bits, signed) is evaluated using 32-bit arithmetic, and then
used in a context that expects an expression of type "uint64_t" (64
bits, unsigned).
4299 depth = 16 << depth;
Fix it by forcing the expression to be 64 bits wide by using '16ULL'.
Resolves: Coverity CID 1593156
Fixes: c48bd18eae ("target/riscv: Add support for Control Transfer Records extension CSRs.")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250307124602.1905754-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit f06bfe3dc3 ("target/riscv: implement zicfiss instructions") adds
`ssamoswap` instruction. `ssamoswap` takes the code-point from existing
reserved encoding (and not a zimop like other shadow stack instructions).
If shadow stack is not enabled (via xenvcfg.SSE) and effective priv is
less than M then `ssamoswap` must result in an illegal instruction
exception. However if effective priv is M, then `ssamoswap` results in
store/AMO access fault. See Section "22.2.3. Shadow Stack Memory
Protection" of priv spec.
Fixes: f06bfe3dc3 ("target/riscv: implement zicfiss instructions")
Reported-by: Ved Shanbhogue <ved@rivosinc.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250306064636.452396-2-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit:8205bc1 ("target/riscv: introduce ssp and enabling controls for
zicfiss") introduced CSR_SSP but it mis-interpreted the spec on access
to CSR_SSP in M-mode. Gated to CSR_SSP is not gated via `xSSE`. But
rather rules clearly specified in section "22.2.1. Shadow Stack Pointer
(ssp) CSR access contr" in the priv spec.
Fixes: 8205bc127a ("target/riscv: introduce ssp and enabling controls
for zicfiss". Thanks to Adam Zabrocki for bringing this to attention.
Reported-by: Adam Zabrocki <azabrocki@nvidia.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250306064636.452396-1-debug@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fault-only-first loads in the RISC-V vector extension need to update
the vl with the element index that causes an exception.
In order to ensure this the emulation of this instruction used to probe the
memory covered by the load operation with a loop that iterated over each element
so that when a flag was raised it was possible to set the vl to the
corresponding element index.
This loop was executed every time whether an exception happened or not.
This commit removes the per element memory probing from the main execution path
and adds a broad memory probing first. If this probing raises any flag that is
not a watchpoint flag (that per standard is allowed by this instruction) we
proceed with the per element probing to find the index of the element causing
the exception and set vl to such index.
Signed-off-by: Paolo Savini <paolo.savini@embecosm.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250221155320.59159-2-paolo.savini@embecosm.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-17-philmd@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20241114011310.3615-19-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241114011310.3615-18-philmd@linaro.org>
- Merge "qemu/clang-tsa.h" within "qemu/compiler.h"
- Various cleanups around accelerators initialization code
(better user/system split)
- Various trivial cleanups in accel/tcg/,
Guard few TCG calls with tcg_enabled()
- Explicit disassemble_info endianness
- Improve dual-endianness support for MicroBlaze
-----BEGIN PGP SIGNATURE-----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=3TRh
-----END PGP SIGNATURE-----
Merge tag 'accel-cpus-20250306' of https://github.com/philmd/qemu into staging
Generic CPUs / accelerators patch queue
- Merge "qemu/clang-tsa.h" within "qemu/compiler.h"
- Various cleanups around accelerators initialization code
(better user/system split)
- Various trivial cleanups in accel/tcg/,
Guard few TCG calls with tcg_enabled()
- Explicit disassemble_info endianness
- Improve dual-endianness support for MicroBlaze
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmfJw08ACgkQ4+MsLN6t
# wN70whAAtfcdWtqseFfb6fvDtjflgxN51Ui0iaOECXUA18USKriGy34eBcMYMiM2
# +eKgU7+jI6JGE4+burcgWUsPpFFF951/A8+lyIbFgO5yToTDmC+qNe4XfmMAIyXq
# uf9Obr2c0Xk9luh4odb+jPAQodw/7G1fKgcCVIJNDCl/xEcPhS9eNpTaHwcVnkWI
# K6KrxWXOsqG6+evJBPWYoXtOOyt0+JcwAsJoGhprwtGm3P9+jSVXsgeGsJVyZcna
# f32JtjWL754O8XeMkOn4x6rt58VrCIMKI9xT7keDyuhTCq0Zki9RO2nMU2dSw5mN
# AfL9hxqUy0Nijnyslg3ugujDfTePsNyLdwwH7n0mnoD72ELi6WnhDsmOThuEB3Rd
# 4/kdwTJfA/rlWk/GF1tbKW7AvQZokRARtzmL3V0HmGJu57lX+2JuszEdYBkqDEP7
# GH1I10B2yANUm+C9y3X8qWOU7Ws433ebJeJoZuyfnbZ9Me+UfRmql/oS+V8ata2i
# fArEItpldUFrWRyYLkTbXrh2dgyV9yJTEir/lzOzeAZZzyabTbjf2z9qnh976GGO
# 1QnDy5QA4f54kDBUZe7JK26TZsHPch7cgqXW6f8tRlJF7A9hxGK8d2TUV/lC3/vx
# LUOlWNu03PhiruYmZEcWOsY3Jt9jRCF6lIryrnaJsqnVOVmMUMM=
# =3TRh
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Mar 2025 23:46:23 HKT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'accel-cpus-20250306' of https://github.com/philmd/qemu: (54 commits)
include: Poison TARGET_PHYS_ADDR_SPACE_BITS definition
system: Open-code qemu_init_arch_modules() using target_name()
target/i386: Mark WHPX APIC region as little-endian
target/alpha: Do not mix exception flags and FPCR bits
target/riscv: Convert misa_mxl_max using GLib macros
target/riscv: Declare RISCVCPUClass::misa_mxl_max as RISCVMXL
target/xtensa: Finalize config in xtensa_register_core()
target/sparc: Constify SPARCCPUClass::cpu_def
target/i386: Constify X86CPUModel uses
disas: Remove target_words_bigendian() call in initialize_debug_target()
target/xtensa: Set disassemble_info::endian value in disas_set_info()
target/sh4: Set disassemble_info::endian value in disas_set_info()
target/riscv: Set disassemble_info::endian value in disas_set_info()
target/ppc: Set disassemble_info::endian value in disas_set_info()
target/mips: Set disassemble_info::endian value in disas_set_info()
target/microblaze: Set disassemble_info::endian value in disas_set_info
target/arm: Set disassemble_info::endian value in disas_set_info()
target: Set disassemble_info::endian value for big-endian targets
target: Set disassemble_info::endian value for little-endian targets
target/mips: Fix possible MSA int overflow
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use GLib conversion macros to pass misa_mxl_max as
riscv_cpu_class_init() class data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-5-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-8-philmd@linaro.org>
AccelCPUClass is for accelerator to initialize target specific
features of a vCPU. Not really related to hardware emulation,
rename "hw/core/accel-cpu.h" as "accel/accel-cpu-target.h"
(using the explicit -target suffix).
More importantly, target specific header often access the
target specific definitions which are in each target/FOO/cpu.h
header, usually included generically as "cpu.h" relative to
target/FOO/. However, there is already a "cpu.h" in hw/core/
which takes precedence. This change allows "accel-cpu-target.h"
to include a target "cpu.h".
Mechanical change doing:
$ git mv include/hw/core/accel-cpu.h \
include/accel/accel-cpu-target.h
$ sed -i -e 's,hw/core/accel-cpu.h,accel/accel-cpu-target.h,' \
$(git grep -l hw/core/accel-cpu.h)
and renaming header guard 'ACCEL_CPU_TARGET_H'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-12-philmd@linaro.org>
TCGCPUOps structure makes more sense in the accelerator context
rather than hardware emulation. Move it under the accel/tcg/ scope.
Mechanical change doing:
$ sed -i -e 's,hw/core/tcg-cpu-ops.h,accel/tcg/cpu-ops.h,g' \
$(git grep -l hw/core/tcg-cpu-ops.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-11-philmd@linaro.org>
PropertyInfo member @type is externally visible via QMP
device-list-properties and qom-list-properies.
Its meaning is not documented at its definition.
It gets passed as @type argument to object_property_add() and
object_class_property_add(). This argument's documentation isn't of
much help, either:
* @type: the type name of the property. This namespace is pretty loosely
* defined. Sub namespaces are constructed by using a prefix and then
* to angle brackets. For instance, the type 'virtio-net-pci' in the
* 'link' namespace would be 'link<virtio-net-pci>'.
The two QMP commands document it as
# @type: the type of the property. This will typically come in one of
# four forms:
#
# 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or
# 'double'. These types are mapped to the appropriate JSON
# type.
#
# 2) A child type in the form 'child<subtype>' where subtype is a
# qdev device type name. Child properties create the
# composition tree.
#
# 3) A link type in the form 'link<subtype>' where subtype is a
# qdev device type name. Link properties form the device model
# graph.
"Typically come in one of four forms" followed by three items inspires
the level of trust that is appropriate here.
Clean up a bunch of funnies:
* qdev_prop_fdc_drive_type.type is "FdcDriveType". Its .enum_table
refers to QAPI type "FloppyDriveType". So use that.
* qdev_prop_reserved_region is "reserved_region". Its only user is an
array property called "reserved-regions". Its .set() visits str.
So change @type to "str".
* trng_prop_fault_event_set.type is "uint32:bits". Its .set() visits
uint32, so change @type to "uint32". If we believe mentioning it's
actually bits is useful, the proper place would be .description.
* ccw_loadparm.type is "ccw_loadparm". It's users are properties
called "loadparm". Its .set() visits str. So change @type to
"str".
* qdev_prop_nv_gpudirect_clique.type is "uint4". Its set() visits
uint8, so change @type to "uint8". If we believe mentioning the
range is useful, the proper place would be .description.
* s390_pci_fid_propinfo.type is "zpci_fid". Its .set() visits uint32.
So change type to that, and move the "zpci_fid" to .description.
This is admittedly a lousy description, but it's still an
improvement; for instance, output of -device zpci,help changes from
fid=<zpci_fid>
to
fid=<uint32> - zpci_fid
* Similarly for a raft of PropertyInfo in target/riscv/cpu.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250227085601.4140852-5-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Commit message typo fixed]
