SA_RESTORER and the associated sa_restorer field of struct sigaction are
an obsolete feature, not expected to be used by future architectures.
They are also absent on RISC-V, LoongArch, Hexagon and OpenRISC, but
defined due to their use of generic/signal.h. This leads to corrupted
data and out-of-bounds accesses.
Move the definition of TARGET_SA_RESTORER out of generic/signal.h into the
target_signal.h files that need it. Note that m68k has the sa_restorer
field, but does not use it and does not define SA_RESTORER.
Reported-by: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <mvmed060xc9.fsf@suse.de>
When complying with the alignment requested in the ELF and unmapping
the excess reservation, having align_end not aligned to the guest page
causes the unmap to be rejected by the alignment check at
target_munmap and later brk adjustments hit an EEXIST.
Fix by aligning the start of region to be unmapped.
Fixes: c81d1fafa6 ("linux-user: Honor elf alignment when placing images")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1913
Signed-off-by: Fabiano Rosas <farosas@suse.de>
[rth: Align load_end as well.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250213143558.10504-1-farosas@suse.de>
Replace target-specific 'Z' with generic 'z'.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace target-specific 'Z' with generic 'z'.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace target-specific 'Z' with generic 'z'.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace target-specific 'Z' with generic 'z'.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For loongarch, mips, riscv and sparc, a zero register is
available all the time. For aarch64, register index 31
depends on context: sometimes it is the stack pointer,
and sometimes it is the zero register.
Introduce a new general-purpose constraint which maps 0
to TCG_REG_ZERO, if defined. This differs from existing
constant constraints in that const_arg[*] is recorded as
false, indicating that the value is in a register.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we no longer support 64-bit guests on 32-bit hosts,
we can use a 32-bit type on a 32-bit host. This shrinks
the size of the structure to 16 bytes on a 32-bit host.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we no longer support 64-bit guests on 32-bit hosts,
we can use a 32-bit type on a 32-bit host.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
DisasContextBase.pc_next has type vaddr; use the correct log format.
Fixes: 85c19af63e ("include/exec: Use vaddr in DisasContextBase for virtual addresses")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
DisasContextBase.pc_next has type vaddr; use the correct log format.
Fixes: 85c19af63e ("include/exec: Use vaddr in DisasContextBase for virtual addresses")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The declaration uses uint64_t for addr.
Fixes: 595cd9ce2e ("plugins: add plugin API to read guest memory")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is now always only one guest address register.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The guest address will now always fit in one register.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The guest address will now always fit in one register.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The guest address will now always fit in one register.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The guest address will now always be TCG_TYPE_I32.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 64-on-32 is now unsupported, guest addresses always
fit in one host register. Drop the replication of opcodes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is now prohibited in configuration.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These should have been removed with the rest. There are
a couple of hosts which can emit guest_base into the
constant pool: aarch64, mips64, ppc64, riscv64.
Fixes: a417ef8350 ("tcg: Remove TCG_TARGET_NEED_LDST_LABELS and TCG_TARGET_NEED_POOL_LABELS")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This patch tests whether MCQ initialization and basic read-write
operations work correctly when the MCQ parameter of hw/ufs is enabled.
Acked-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
In legacy doorbell mode, the command descriptor slot matched
the UTRD slot. To maintain consistency in MCQ mode, command descriptor
slot allocation and deallocation now use a bitmap-based approach.
Acked-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Removed dead code related to the unimplemented task
management request.
Acked-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
QEMU UFS has supported both legacy single doorbell and MCQ,
but the LSDBS value was incorrectly set. This change corrects
the LSDBS value to 0.
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
- Proper TLS termination for multifd
- Fixes for bugs while cancelling migration
- Fix for a hang after migration failure (#2633)
- Tests for qmp_migrate_cancel
- Fix for CID 1590980
- Fixes and improvements to guestperf.py
-----BEGIN PGP SIGNATURE-----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=cBl0
-----END PGP SIGNATURE-----
Merge tag 'migration-20250214-pull-request' of https://gitlab.com/farosas/qemu into staging
Migration pull request
- Proper TLS termination for multifd
- Fixes for bugs while cancelling migration
- Fix for a hang after migration failure (#2633)
- Tests for qmp_migrate_cancel
- Fix for CID 1590980
- Fixes and improvements to guestperf.py
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmevp3oQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxnSgGD/9z2ATsf073wDupwJ7tJIxgZ6D8Dlb7yPZ6
# azRgC7TMv1VGE0cx4r1IiNopFDUodrVO3yXA9D7GVvfkgSr9Oa4oUniQwItM9PT4
# QymGPKIE0nuwPCvCrlKXXGruLMngTeb0kpJeseJ9vEXJlQxLvYCtcELF6j2tzVmx
# nisMgMZiyBwYfS0b7ZctXHqY0+NmNuke/giX6ceUAaj4wqpgFI3zo9OGCHYinYsR
# oMoMLusyUnDBCqV2P3jGGz4W2KmkCxStnH0yRdUN9mwt0KLl82t6e0aCJqkWo6+W
# m68DlZgUFwbz4Aq5M2RDPhXvXgim8Ryi29zRuedx8ngYS9Qz6D5y4Fgp4uv/N7ia
# v8bB6QPZMOkhPq2gkCxPEy47l4tDZhrWRqqEqw4h1nO01KCJ2+y2IZCOBmPFXywT
# B58f7KvmnLLiYbfWxjnQmOXs9PKRsQjJk96BmRCbf03WeNTF+FHuvQZu9h4Bwb2/
# im0kJSq2zR8eSamH2L2dyYhQZ4JqMJa7I3JXqJbAjhk1ya6kX5v899EcktTPDVSG
# xGINVshpfwwFovRqhgYL9fjqrO8DMNZCbS6IEGLuR5lx90Wo5a8XbKX71JmsnZUO
# jnGJ+1InTZcbUvp0tkQzXWwUKx8MCP/OWTb098D8oUmfEumYozzsAW5X9kw+4hVJ
# rpYvw5IYfA==
# =cBl0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 14 Feb 2025 15:28:42 EST
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'migration-20250214-pull-request' of https://gitlab.com/farosas/qemu: (22 commits)
guestperf: Add test result data into report
guestperf: Introduce multifd compression option
guestperf: Nitpick the inconsistent parameters
guestperf: Support deferred migration for multifd
migration: use parameters.mode in cpr_state_save
migration: Update migrate_cancel documentation
tests/qtest/migration: Add a cancel test
tests/qtest/migration: Introduce migration_test_add_suffix
migration: Don't set FAILED state when cancelling
migration: Reject qmp_migrate_cancel after postcopy
migration: Fix hang after error in destination setup phase
migration: Change migrate_fd_ to migration_
migration: Unify migration_cancel and migrate_fd_cancel
migration: Set migration error outside of migrate_cancel
migration: Check migration error after loadvm
migration/multifd: Add a compat property for TLS termination
migration/multifd: Terminate the TLS connection
io: Add a read flag for relaxed EOF
io: Add flags argument to qio_channel_readv_full_all_eof
crypto: Remove qcrypto_tls_session_get_handshake_status
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Users can use -device loader to get an ELF file loaded to
memory, so we don't need to require one of these options.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250215021654.1786679-2-keithp@keithp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This device is only used by the ARM targets, which are only
built as little-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_LITTLE_ENDIAN (besides, the
DEVICE_BIG_ENDIAN case isn't tested). Simplify directly
using DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250212113938.38692-5-philmd@linaro.org>
The Loonson3 Virt machine is only built as little-endian.
Therefore the DEVICE_NATIVE_ENDIAN definition expand to
DEVICE_LITTLE_ENDIAN (besides, the DEVICE_BIG_ENDIAN case
isn't tested). Simplify directly using DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250212113938.38692-4-philmd@linaro.org>
The Boston machine is only built as little-endian.
Therefore the DEVICE_NATIVE_ENDIAN definition expand to
DEVICE_LITTLE_ENDIAN (besides, the DEVICE_BIG_ENDIAN case
isn't tested). Simplify directly using DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250212113938.38692-3-philmd@linaro.org>
These devices are only used by the ARM targets, which are
only built as little-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_LITTLE_ENDIAN (besides, the
DEVICE_BIG_ENDIAN case isn't tested). Simplify directly using
DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250212113938.38692-2-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness on the single machine using the
device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-7-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-6-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-5-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-4-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-3-philmd@linaro.org>
Introduce the EndianMode type and the DEFINE_PROP_ENDIAN() macros.
Endianness can be BIG, LITTLE or unspecified (default).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-2-philmd@linaro.org>
When the %data argument is not modified, we can declare it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-8-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-7-philmd@linaro.org>
Commit f0ec14c78c ("tests/avocado: Fix console data loss") fixed
QEMUMachine's problem with console, we don't need to use the sleep()
kludges.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250206131052.30207-15-philmd@linaro.org>
Make microblaze tests a bit more generic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250206131052.30207-14-philmd@linaro.org>
The archive used in test_microblaze_s3adsp1800.py (testing a
big-endian target) contains a big-endian kernel. Rename using
the _BE suffix.
Similarly, the archive in test_microblazeel_s3adsp1800 (testing
a little-endian target) contains a little-endian kernel. Rename
using _LE suffix.
These changes will help when adding cross-endian kernel tests.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250206131052.30207-13-philmd@linaro.org>
The SMC91C111 includes an MMU Command register which permits
the guest to remove entries from the RX FIFO. The datasheet
does not specify what happens if the guest tries to do this
when the FIFO is already empty; there are no status registers
containing error bits which might be applicable.
Currently we don't guard at all against pop of an empty
RX FIFO, with the result that we allow the guest to drive
the rx_fifo_len index to negative values, which will cause
smc91c111_receive() to write to the rx_fifo[] array out of
bounds when we receive the next packet.
Instead ignore attempts to pop an empty RX FIFO.
Cc: qemu-stable@nongnu.org
Fixes: 80337b66a8 ("NIC emulation for qemu arm-softmmu")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2780
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250207151157.3151776-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
opentitan_machine_init() calls get_system_memory(),
which is declared in "exec/address-spaces.h". Include
it in order to avoid when refactoring unrelated headers:
hw/riscv/opentitan.c:83:29: error: call to undeclared function 'get_system_memory'
83 | MemoryRegion *sys_mem = get_system_memory();
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20250206181827.41557-4-philmd@linaro.org>
Using the auto_create_sdcard feature without SD Bus is irrelevant.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250204200934.65279-8-philmd@linaro.org>
MachineClass::auto_create_sdcard is only useful to automatically
create a SD card, attach a IF_SD block drive to it and plug the
card onto a SD bus. None of the RISCV machines modified by this
commit try to use the IF_SD interface.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-7-philmd@linaro.org>
