Linux checks for the PLLs in the PHY to be locked, so implement a model
emulating that.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-9-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The USDHC emulation allows for running real-world images such as those generated
by Buildroot. Convert the board documentation accordingly instead of running a
Linux kernel with ephemeral storage.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-8-shentey@gmail.com
[PMM: drop 'static const' from usdhc_table[] for GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SNVS contains an RTC which allows Linux to deal correctly with time. This is
particularly useful when handling persistent storage which will be done in the
next patch.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-7-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes quite a few stack traces during the Linux boot process. Also provides the
clocks for devices added later, e.g. enet1.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-6-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As a first step, implement the bare minimum: CPUs, RAM, interrupt controller,
serial. All other devices of the A53 memory map are represented as
TYPE_UNIMPLEMENTED_DEVICE, i.e. the whole memory map is provided. This allows
for running Linux without it crashing due to invalid memory accesses.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-5-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: drop 'static const' from serial_table[] definition to avoid
compile failure on GCC 7.5]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On the real device, the PCIe root bus is only connected to a PCIe bridge and
does not allow for direct attachment of devices. Doing so in QEMU results in no
PCI devices being detected by Linux. Instead, PCI devices should plug into the
secondary PCIe bus spawned by the internal PCIe bridge.
Unfortunately, QEMU defaults to plugging devices into the PCIe root bus. To work
around this, every PCI device created on the command line needs an extra
`bus=dw-pcie` option which is error prone. Fix that by marking the PCIe root bus
as full which makes QEMU decend into the child PCIe bus.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-3-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While at it add missing GUSB2RHBCTL register as found in i.MX 8M Plus reference
manual.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250223114708.1780-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add has_caches flag to SMPCompatProps, which helps in avoiding
extra checks for every single layer of caches in x86 (and ARM in
future).
Signed-off-by: Alireza Sanaee <alireza.sanaee@huawei.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20250110145115.1574345-6-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Feature virtual extioi is loongArch virt machine property rather than
vCPU property in qemu side. However it is vCPU property in KVM kernel
side, here add loongArch virt machine property checking and enable virt
extioi feature when vCPU is created.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
The boston machine doesn't set MachineState::fdt to the DTB blob that
it has loaded or created, which means that the QMP/HMP dumpdtb
monitor commands don't work.
Setting MachineState::fdt is easy in the non-FIT codepath: we can
simply do so immediately before loading the DTB into guest memory.
The FIT codepath is a bit more awkward as currently the FIT loader
throws away the memory that the FDT was in after it loads it into
guest memory. So we add a void *pfdt argument to load_fit() for it
to store the FDT pointer into.
There is some readjustment required of the pointer handling in
loader-fit.c, so that it applies 'const' only where it should (e.g.
the data pointer we get back from fdt_getprop() is const, because
it's into the middle of the input FDT data, but the pointer that
fit_load_image_alloc() should not be const, because it's freshly
allocated memory that the caller can change if it likes).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250206151214.2947842-5-peter.maydell@linaro.org
The openrisc machines don't set MachineState::fdt to point to their
DTB blob. This means that although the command line '-machine
dumpdtb=file.dtb' option works, the equivalent QMP and HMP monitor
commands do not, but instead produce the error "This machine doesn't
have a FDT".
Set MachineState::fdt in openrisc_load_fdt(), when we write it to
guest memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250206151214.2947842-3-peter.maydell@linaro.org
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
=tej8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
# 7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
# fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
# BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
# twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
# XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
# =tej8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Feb 2025 20:21:31 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
docs/devel/reset: Document reset expectations for DMA and IOMMU
hw/vfio/common: Add a trace point in vfio_reset_handler
hw/arm/smmuv3: Move reset to exit phase
hw/i386/intel-iommu: Migrate to 3-phase reset
hw/virtio/virtio-iommu: Migrate to 3-phase reset
vhost-user-snd: correct the calculation of config_size
net: vhost-user: add QAPI events to report connection state
hw/virtio/virtio-nsm: Respond with correct length
vdpa: Fix endian bugs in shadow virtqueue
MAINTAINERS: add more files to `vhost`
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
vhost-iova-tree: Update documentation
vhost-iova-tree, svq: Implement GPA->IOVA & partial IOVA->HVA trees
vhost-iova-tree: Implement an IOVA-only tree
amd_iommu: Use correct bitmask to set capability BAR
amd_iommu: Use correct DTE field for interrupt passthrough
hw/virtio: reset virtio balloon stats on machine reset
mem/cxl_type3: support 3, 6, 12 and 16 interleave ways
hw/mem/cxl_type3: Ensure errp is set on realization failure
hw/mem/cxl_type3: Fix special_ops memory leak on msix_init_exclusive_bar() failure
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When a machine is first booted, all virtio balloon stats are initialized
to their default value -1 (18446744073709551615 when represented as
unsigned).
They remain that way while the firmware is loading, and early phase of
guest OS boot, until the virtio-balloon driver is activated. Thereafter
the reported stats reflect the guest OS activity.
When a machine reset is performed, however, the virtio-balloon stats are
left unchanged by QEMU, despite the guest OS no longer updating them,
nor indeed even still existing.
IOW, the mgmt app keeps getting stale stats until the guest OS starts
once more and loads the virtio-balloon driver (if ever). At that point
the app will see a discontinuity in the reported values as they sudden
jump from the stale value to the new value. This jump is indigituishable
from a valid data update.
While there is an "last-updated" field to report on the freshness of
the stats, that does not unambiguously tell the mgmt app whether the
stats are still conceptually relevant to the current running workload.
It is more conceptually useful to reset the stats to their default
values on machine reset, given that the previous guest workload the
stats reflect no longer exists. The mgmt app can now clearly identify
that there are is no stats information available from the current
executing workload.
The 'last-updated' time is also reset back to 0.
IOW, on every machine reset, the virtio stats are in the same clean
state they were when the macine first powered on.
A functional test is added to validate this behaviour with a real
world guest OS.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20250204094202.2183262-1-berrange@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce the `CXL_T3_MSIX_VECTOR` enumeration to specify MSIX vector
assignments specific to the Type 3 (T3) CXL device.
The primary goal of this change is to encapsulate the MSIX vector uses
that are unique to the T3 device within an enumeration, improving code
readability and maintenance by avoiding magic numbers. This organizational
change allows for more explicit references to each vector’s role, thereby
reducing the potential for misconfiguration.
It also modified `mailbox_reg_init_common` to accept the `msi_n` parameter,
reflecting the new MSIX vector setup.
This pertains to the T3 device privately; other endpoints should refrain from
using it, despite its public accessibility to all of them.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20250203161908.145406-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcie_sriov doesn't have code to restore its state after migration, but
igb, which uses pcie_sriov, naively claimed its migration capability.
Add code to register VFs after migration and fix igb migration.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-11-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
num_vfs is not migrated so use PCI_SRIOV_CTRL_VFE and PCI_SRIOV_NUM_VF
instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-10-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable SR-IOV VF devices by reusing code to power down PCI devices
instead of removing them when the guest requests to disable VFs. This
allows to realize devices and report VF realization errors at PF
realization time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-8-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() aborts when creating a VF with addr >= PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250116-reuse-v20-7-7cb370606368@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PCS exists in NPCM8XX's GMAC1 and is used to control the SGMII
PHY. This implementation contains all the default registers and
the soft reset feature that are required to load the Linux kernel
driver. Further features have not been implemented yet.
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250219184609.1839281-15-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM8XX adds a few new registers and have a different set of reset
values to the CLK modules. This patch supports them.
This patch doesn't support the new clock values generated by these
registers. Currently no modules use these new clock values so they
are not necessary at this point.
Implementation of these clocks might be required when implementing
these modules.
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-14-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These 2 values are different between NPCM7XX and NPCM8XX
CLKs. So we add them to the class and assign different values
to them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-13-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of NPCM7XX and NPCM8XX CLK modules share the same code,
this commit moves the NPCM7XX CLK to NPCM CLK for these
properties.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-12-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM7XX and NPCM8XX have a different set of CLK registers. This
commit changes the name of the clk files to be used by both
NPCM7XX and NPCM8XX CLK modules.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-11-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM8XX boot block stores the DRAM size in SCRPAD_B register in GCR
module. Since we don't simulate a detailed memory controller, we
need to store this information directly similar to the NPCM7XX's
INCTR3 register.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-9-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These 2 values are different between NPCM7XX and NPCM8XX
GCRs. So we add them to the class and assign different values
to them.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-7-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of NPCM7XX and NPCM8XX GCR modules share the same code,
this commit moves the NPCM7XX GCR to NPCM GCR for these
properties.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-6-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
NPCM7XX and NPCM8XX have a different set of GCRs and the GCR module
needs to fit both. This commit changes the name of the GCR module.
Future commits will add the support for NPCM8XX GCRs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20250219184609.1839281-5-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows different FIUs to have different flash sizes, useful
in NPCM8XX which has multiple different sized FIU modules.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@linaro.org>
Message-id: 20250219184609.1839281-4-wuhaotsh@google.com
[PMM: flash_size must be a uint64_t to build on 32-bit hosts]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the EndianMode type and the DEFINE_PROP_ENDIAN() macros.
Endianness can be BIG, LITTLE or unspecified (default).
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-2-philmd@linaro.org>
Invert the 'no_sdcard' logic, renaming it as the more explicit
"auto_create_sdcard". Machines are supposed to create a SD Card
drive when this flag is set. In many cases it doesn't make much
sense (as boards don't expose SD Card host controller), but this
is patch only aims to expose that nonsense; so no logical change
intended (mechanical patch using gsed).
Most of the changes are:
- mc->no_sdcard = ON_OFF_AUTO_OFF;
+ mc->auto_create_sdcard = true;
Except in
. hw/core/null-machine.c
. hw/arm/xilinx_zynq.c
. hw/s390x/s390-virtio-ccw.c
where the disabled option is manually removed (since default):
- mc->no_sdcard = ON_OFF_AUTO_ON;
+ mc->auto_create_sdcard = false;
- mc->auto_create_sdcard = false;
and in system/vl.c we change the 'default_sdcard' type to boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-4-philmd@linaro.org>
MachineClass::no_sdcard is initialized as false by default.
To catch all uses, convert it to a tri-state, having the
current default (false) becoming AUTO.
No logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-2-philmd@linaro.org>
Because the legacy Xen backend devices can optionally be plugged on the
TYPE_PLATFORM_BUS_DEVICE, have it inherit TYPE_DYNAMIC_SYS_BUS_DEVICE.
Remove the implicit TYPE_XENSYSDEV instance_size.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20250125181343.59151-10-philmd@linaro.org>
Some TYPE_SYS_BUS_DEVICEs can be optionally dynamically
plugged on the TYPE_PLATFORM_BUS_DEVICE.
Rather than sometimes noting that with comment around
the 'user_creatable = true' line in each DeviceRealize
handler, introduce an abstract TYPE_DYNAMIC_SYS_BUS_DEVICE
class.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250125181343.59151-4-philmd@linaro.org>
HPET device needs to access and update hpet_cfg variable, but now it is
defined in hw/i386/fw_cfg.c and Rust code can't access it.
Move hpet_cfg definition to hpet.c (and rename it to hpet_fw_cfg). This
allows Rust HPET device implements its own global hpet_fw_cfg variable,
and will further reduce the use of unsafe C code access and calls in the
Rust HPET implementation.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250210030051.2562726-2-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ6wQngAKCRAfewwSUazn
0SggAQDk5mp90dBJwu05kioq+Inx/bwxmamweA+FmeqAnoQ79QEApDBPfppkrN2y
AxNZL0EL5zRFU3zECSTevpRMQ3UoVQk=
=tLFD
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250212' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ6wQngAKCRAfewwSUazn
# 0SggAQDk5mp90dBJwu05kioq+Inx/bwxmamweA+FmeqAnoQ79QEApDBPfppkrN2y
# AxNZL0EL5zRFU3zECSTevpRMQ3UoVQk=
# =tLFD
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 11 Feb 2025 22:08:14 EST
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250212' of https://gitlab.com/bibo-mao/qemu:
hw/loongarch/virt: CPU irq line connection improvement
hw/loongarch/virt: Remove unused ipistate
hw/loongarch/virt: Set iocsr address space when CPU is created
hw/loongarch/virt: Add separate file for fdt building
hw/loongarch/virt: Rename function prefix name
hw/loongarch/virt: Rename filename acpi-build with virt-acpi-build
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Interrupt controller extioi and ipi connect to CPU with irq line method.
With command -smp x, -device la464-loongarch-cpu, smp.cpus is not
accurate for all possible CPU objects, possible_cpu_arch_ids() is used.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Similiar with virt-acpi-build.c, file virt-fdt-build.c is added here.
And move functions relative with fdt table building to the file.
It is only code movement and there is no function change.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replace function prefix name loongarch_xxx with virt_xxx in file
virt-acpi-build.c
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This helper will be useful in the listener handlers to extract the
VFIO device from a memory region using memory_region_owner(). At the
moment, we only care for PCI passthrough devices. If the need arises,
we will add more.
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250206131438.1505542-5-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In heterogeneous setup the first vCPU might not be
the one expected, better pass it explicitly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20250130112615.3219-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Each Astro on 64-bit machines supports up to four LMMIO regions.
Those regions are used by graphic cards and other PCI devices which
need to map huge memory areas. The LMMIO regions are configured and
set up by SeaBIOS-hppa and then used as-is by the operating systems
(Linux, HP-UX).
With this addition it's now possible to add other PCI graphic
cards on the command line, e.g. with "-device ati-vga".
Signed-off-by: Helge Deller <deller@gmx.de>
The sdcard_legacy.h header defines function prototypes for the "legacy"
SD card API, which was used by non-qdevified SD controller models.
We've now converted the only remaining non-qdev SD controller, so
we can drop the legacy API.
Entirely unused functions:
sd_init(), sd_set_cb(), sd_enable()
Functions which now become static inside sd.c (they are the
underlying implementations of methods on SDCardClass):
sd_do_command(), sd_write_byte(), sd_read_byte()
Removal of sd_init() means that we can also remove the
me_no_qdev_me_kill_mammoth_with_rocks flag, the codepaths that were
only reachable when it was set, and the inserted_cb and readonly_cb
qemu_irq lines that went with that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250128104519.3981448-11-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The SDCardClass has an 'enable' method, but nothing actually invokes it.
The underlying implementation is sd_enable(), which is documented
in sdcard_legacy.h as something that should not be used and was only
present for the benefit of the now-removed nseries boards. Unlike
all the other method pointers in SDCardClass, this one doesn't have
an sdbus_foo() function wrapper in hw/sd/core.c.
Remove the unused method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-10-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The approach we've settled on for handling the omap_clk wiring for
OMAP devices converted to QDev is to have a function omap_foo_set_clk()
whose implementation just sets the field directly in the device's
state struct. (See the "TODO" comment near the top of omap.h.)
Make omap_mmc do the same.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the OMAP MMC controller to the new SDBus API:
* the controller creates an SDBus bus
* instead of sd_foo functions on the SDState object, call
sdbus_foo functions on the SDBus
* the board code creates a proper TYPE_SD_CARD object and attaches
it to the controller's SDBus, instead of the controller creating
a card directly via sd_init() that never gets attached to any bus
* because the SD card object is on a bus, it gets reset automatically
by the "traverse the qbus tree resetting things" code, and we don't
need to manually reset the card from the controller reset function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-5-peter.maydell@linaro.org>
[PMD: Include "hw/sd/sd.h" instead of "hw/sd/sdcard_legacy.h",
create bus in omap_mmc_initfn() instead of omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
