Since memory region iomem supports memory access size with 1/2/4/8,
it can be used for memory region iomem8 and iomem32_high. Now remove
memory region iomem8 and iomem32_high, merge them into iomem together.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023754.1877445-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Rename memory region iomem32_low with iomem, also change ops name
as follows:
loongarch_pch_pic_reg32_low_ops --> loongarch_pch_pic_ops
loongarch_pch_pic_low_readw --> loongarch_pch_pic_read
loongarch_pch_pic_low_writew --> loongarch_pch_pic_write
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023754.1877445-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Register PCH_PIC_INT_ID constains version and supported irq number
information, and it is read only register. The detailed value can
be set at initial stage, rather than read callback.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023148.1877287-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
The meaning of macro definition STATUS_LO_START is simliar with
PCH_PIC_INT_STATUS, only that offset is different, the same for
macro POL_LO_START. Now remove these duplicated macro definitions.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023148.1877287-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Macro PCH_PIC_HTMSI_VEC_OFFSET and PCH_PIC_ROUTE_ENTRY_OFFSET is renamed
as PCH_PIC_HTMSI_VEC and PCH_PIC_ROUTE_ENTRY separately, it is easier to
understand.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023148.1877287-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
For some registers with width 8 bytes, its name is something like
PCH_PIC_INT_ID_LO and PCH_PIC_INT_ID_HI. From hardware manual,
register name is PCH_PIC_INT_ID instead. Here name PCH_PIC_INT_ID
is used, and PCH_PIC_INT_ID + 4 is used for PCH_PIC_INT_ID_HI.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250507023148.1877287-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCaBljTgAKCRAfewwSUazn
0cSzAPoCbqppm5lUPgFAacD4m1sUI6jLk5pJGMsQTQHkMZ34yQD7BswZhMWPL44Z
LmrZgO7NfqAv96AF1mpRawV9ZXSOGAQ=
=3itp
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250506' of https://github.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCaBljTgAKCRAfewwSUazn
# 0cSzAPoCbqppm5lUPgFAacD4m1sUI6jLk5pJGMsQTQHkMZ34yQD7BswZhMWPL44Z
# LmrZgO7NfqAv96AF1mpRawV9ZXSOGAQ=
# =3itp
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 05 May 2025 21:18:06 EDT
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250506' of https://github.com/bibo-mao/qemu:
hw/loongarch/virt: Allow user to customize OEM ID and OEM table ID
hw/loongarch/virt: Replace RSDT with XSDT table
hw/loongarch/virt: Get physical entry address with elf file
hw/intc/loongarch_pch: Replace legacy reset callback with new api
hw/intc/loongarch_pch: Add reset support
hw/intc/loongarch_extioi: Replace legacy reset callback with new api
hw/intc/loongarch_extioi: Add reset support
hw/intc/loongarch_ipi: Add reset support
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Replace legacy reset callback register device_class_set_legacy_reset()
with new function resettable_class_set_parent_phases(). With new API,
it will call reset callback of parent object.
The internal state has been cleared in parent object
LOONGARCH_PIC_COMMON, here parent_phases.hold() is directly called.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add reset support with LoongArch pci irqchip, and register reset
callback support with new API resettable_class_set_parent_phases().
Clear internal HW registers and SW state when virt machine resets.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Replace legacy reset callback register device_class_set_legacy_reset()
with new function resettable_class_set_parent_phases(). With new API,
it will call reset callback of parent object and then itself.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add reset support with extioi irqchip, and register reset callback
support with new API resettable_class_set_parent_phases(). Clear
internal HW registers and SW state when virt machine resets.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add reset support with ipi object, register reset callback and clear
internal registers when virt machine resets.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
- Define new types for ast2700tsp INTC and INTCIO
- Add register definitions for TSP INTC and INTCIO
- Implement write handlers for TSP INTC and INTCIO
- Register new types in aspeed_intc_register_types
The design of the TSP INTC and INTCIO controllers is similar to
AST2700, with the following differences:
- AST2700
Support GICINT128 to GICINT136 in INTC
The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-tsp
Support TSPINT128 to TSPINT136 in INTC
The INTCIO TSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> TSPINT 160
Bit 1 -> TSPINT 161
Bit 2 -> TSPINT 162
Bit 3 -> TSPINT 163
Bit 4 -> TSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: I3f3aca4b90129640369cf4a92deb4b9a12df5b70
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-5-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
- Define new types for ast2700ssp INTC and INTCIO
- Add register definitions for SSP INTC and INTCIO
- Implement write handlers for SSP INTC and INTCIO
- Register new types in aspeed_intc_register_types
The design of the SSP INTC and INTCIO controllers is similar to
AST2700, with the following differences:
- AST2700
Support GICINT128 to GICINT136 in INTC
The INTCIO GIC_192_201 has 10 output pins, mapped as follows:
Bit 0 -> GIC 192
Bit 1 -> GIC 193
Bit 2 -> GIC 194
Bit 3 -> GIC 195
Bit 4 -> GIC 196
- AST2700-ssp
Support SSPINT128 to SSPINT136 in INTC
The INTCIO SSPINT_160_169 has 10 output pins, mapped as follows:
Bit 0 -> SSPINT 160
Bit 1 -> SSPINT 161
Bit 2 -> SSPINT 162
Bit 3 -> SSPINT 163
Bit 4 -> SSPINT 164
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Change-Id: Ib8cb0e264505cef48e17f173e057f3b2d1ea35c4
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250502103449.3091642-4-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We were hiding a number of declarations from user-only,
although it hurts nothing to allow them. The inlines
for user-only are unused.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This update introduces support for handling multi-output IRQs in the AST2700
interrupt controller (INTC), specifically for GICINT192_201. GICINT192_201 maps
1:10 to input IRQ 0 and output IRQs 0 to 9. Each status bit corresponds to a
specific IRQ.
Implemented "aspeed_intc_set_irq_handler_multi_outpins" to handle IRQs with
multiple output pins. Introduced "aspeed_intc_status_handler_multi_outpins"
for managing status registers associated with multi-output IRQs.
Added new IRQ definitions for GICINT192_201 in INTC.
Adjusted the IRQ array to accommodate 10 input pins and 19 output pins,
aligning with the new GICINT192_201 mappings.
|------------------------------|
| INTC |
|inpin[0:0]--------->outpin[0] |
|inpin[0:1]--------->outpin[1] |
|inpin[0:2]--------->outpin[2] |
|inpin[0:3]--------->outpin[3] |
orgates[0]-------> |inpin[0:4]--------->outpin[4] |
|inpin[0:5]--------->outpin[5] |
|inpin[0:6]--------->outpin[6] |
|inpin[0:7]--------->outpin[7] |
|inpin[0:8]--------->outpin[8] |
|inpin[0:9]--------->outpin[9] |
| |
orgates[1]------> |inpin[1]----------->outpin[10]|
orgates[2]------> |inpin[2]----------->outpin[11]|
orgates[3]------> |inpin[3]----------->outpin[12]|
orgates[4]------> |inpin[4]----------->outpin[13]|
orgates[5]------> |inpin[5]----------->outpin[14]|
orgates[6]------> |inpin[6]----------->outpin[15]|
orgates[7]------> |inpin[7]----------->outpin[16]|
orgates[8]------> |inpin[8]----------->outpin[17]|
orgates[9]------> |inpin[9]----------->outpin[18]|
|------------------------------|
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-17-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The INTC controller supports GICINT128 to GICINT136, mapping 1:1 to input and
output IRQs 0 to 8. Previously, the formula "address & 0x0f00" was used to
derive the IRQ index numbers.
However, the INTC controller also supports GICINT192_201, mapping 1 input IRQ
pin to 10 output IRQ pins. The pin numbers for input and output are different.
It is difficult to use a formula to determine the index number of INTC model
supported input and output IRQs.
To simplify and improve readability, introduces the AspeedINTCIRQ structure to
save the input/output IRQ index and its enable/status register address.
Introduce the "aspeed_2700_intc_irqs" table to store IRQ information for INTC.
Introduce the "aspeed_intc_get_irq" function to retrieve the input/output IRQ
pin index from the provided status/enable register address.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-15-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Added support for multiple output pins in the INTC controller to
accommodate the AST2700 A1.
Introduced "num_outpins" to represent the number of output pins. Updated the
IRQ handling logic to initialize and connect output pins separately from input
pins. Modified the "aspeed_soc_ast2700_realize" function to connect source
orgates to INTC and INTC to GIC128 - GIC136. Updated the "aspeed_intc_realize"
function to initialize output pins.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-13-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
To support AST2700 A1, some registers of the INTC(CPU Die) support one input
pin to multiple output pins. Renamed "num_ints" to "num_inpins" in the INTC
controller code for better clarity and consistency in naming conventions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-12-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The previous implementation set the "aspeed_intc_ops" struct, containing read
and write callbacks, to be used when I/O is performed on the INTC region.
Both "aspeed_intc_read" and "aspeed_intc_write" callback functions were used
for INTC (CPU Die).
To support the INTCIO (IO Die) model, introduces a new "reg_ops" class
attribute. This allows setting different memory region operations to support
different INTC models.
Will introduce "aspeed_intcio_read" and "aspeed_intcio_write" callback
functions are used for INTCIO.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-11-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the size of the "regs" array is 0x2000, which is too large. So far,
it only uses "GICINT128 to `GICINT134", and the offsets from 0 to 0x1000 are
unused. To save code size and avoid mapping large unused gaps, update to only
map the useful set of registers:
INTC register [0x1000 – 0x1804]
Update "reg_size" to 0x808. Introduce a new class attribute "reg_offset" to set
the start offset of a "INTC" sub-region. Set the "reg_offset" to 0x1000 for INTC
registers.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the size of the regs array is 0x2000, which is too large. So far,
it only use GICINT128 - GICINT134, and the offsets from 0 to 0x1000 are unused.
To save code size, introduce a new class attribute "reg_size" to set the
different register sizes for the INTC models in AST2700 and add a regs
sub-region in the memory container.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the size of the "regs" array is 0x2000, which is too large. To save
code size and avoid mapping large unused gaps, will update it to only map the
useful set of registers. This update will support multiple sub-regions with
different sizes.
To address the redundant size issue, replace the static "regs" array with a
dynamically allocated "regs" memory.
Introduce a new "aspeed_intc_unrealize" function to free the allocated "regs"
memory.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the AST2700 datasheet, the INTC(CPU DIE) controller has 16KB
(0x4000) of register space, and the INTCIO (I/O DIE) controller has 1KB (0x400)
of register space.
Introduced a new class attribute "mem_size" to set different memory sizes for
the INTC models in AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add logic cpu index input parameter for function cpu_by_arch_id,
CPUState::cpu_index is logic cpu slot index for possible_cpus.
At the same time it is logic index with LoongsonIPICommonState::IPICore,
here hide access for CPUState::cpu_index directly, it comes from
function cpu_by_arch_id().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Supported CPU number can be acquired from function
possible_cpu_arch_ids(), cpu-num property is not necessary and can
be removed.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Supported CPU number can be acquired from function
possible_cpu_arch_ids(), cpu-num property is not necessary.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
-----BEGIN PGP SIGNATURE-----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=0iQW
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu into staging
RISC-V PR for 10.0
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmdkzjgACgkQr3yVEwxT
# gBOcyA//e0XhAQciQglCZZCfINdOyI8qSh+P2K0qtrXZ4VERHEMp7UoD5CQr2cZv
# h8ij1EkatXCwukVELx0rNckxG33bEFgG1oESnQSrwGE0Iu4csNW24nK5WlUS0/r+
# A5oD2wtzEF+cbhTKrVSDBN/PvlnWTKGEoJRkuXWfz5d4uR9eyQhfED0S2j36lNEC
# X1x/OZoKM89XuXtOFe9g55Z5UNzAatcdTISozL0FydiPh7QeVjTLHh28/tt559MX
# 7v5aJFlQuZ78z1mIHkZmPSorSrJ0zqhkP6NWe1ae06oMgzwRQQhYLppDILV4ZgUF
# 3mSDRoXmBycQXiYNPcHep3LdXfvxr+PpWHSevx8gH1jwm93On7Y/H7Uol6TDXzfC
# mrFjalfV5tzrD90ZvB+s5bCMF1q5Z8Dlj0pYF9aN9P1ILoWy3dndFAPJB6uKKDP7
# Qd4qOQ3dVyHAX9jLmVkB6QvAV/vTDrYTsAxaF/EaoLOy0IoKhjTvgda3XzE1MFKA
# gVafLluADIfSEdqa2QR2ExL8d1SZVoiObCp5TMLRer0HIpg/vQZwjfdbo4BgQKL3
# 7Q6wBxcZUNqrFgspXjm5WFIrdk2rfS/79OmvpNM6SZaK6BnklntdJHJHtAWujGsm
# EM310AUFpHMp2h6Nqnemb3qr5l4d20KSt8DhoPAUq1IE59Kb8XY=
# =0iQW
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Dec 2024 20:54:00 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu: (39 commits)
target/riscv: add support for RV64 Xiangshan Nanhu CPU
target/riscv: add ssstateen
target/riscv/tcg: hide warn for named feats when disabling via priv_ver
target/riscv: Include missing headers in 'internals.h'
target/riscv: Include missing headers in 'vector_internals.h'
target/riscv: Check svukte is not enabled in RV32
target/riscv: Expose svukte ISA extension
target/riscv: Check memory access to meet svukte rule
target/riscv: Support hstatus[HUKTE] bit when svukte extension is enabled
target/riscv: Support senvcfg[UKTE] bit when svukte extension is enabled
target/riscv: Add svukte extension capability variable
hw/riscv: Add the checking if DTB overlaps to kernel or initrd
hw/riscv: Add a new struct RISCVBootInfo
hw/riscv: Support to load DTB after 3GB memory on 64-bit system.
hw/char/riscv_htif: Clarify MemoryRegionOps expect 32-bit accesses
hw/char/riscv_htif: Explicit little-endian implementation
MAINTAINERS: Cover RISC-V HTIF interface
tests/qtest/bios-tables-test: Update virt SPCR golden reference for RISC-V
hw/acpi: Upgrade ACPI SPCR table to support SPCR table revision 4 format
qtest: allow SPCR acpi table changes
...
Conflicts:
target/riscv/cpu.c
Merge conflict with DEFINE_PROP_END_OF_LIST() removal. No Property
array terminator is needed anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The last step to enable KVM AIA aplic-imsic with irqchip in split mode
is to deal with how MSIs are going to be sent. In our current design we
don't allow an APLIC controller to send MSIs unless it's on m-mode. And
we also do not allow Supervisor MSI address configuration via the
'smsiaddrcfg' and 'smsiaddrcfgh' registers unless it's also a m-mode
APLIC controller.
Add a new RISCVACPLICState attribute called 'kvm_msicfgaddr'. This
attribute represents the base configuration address for MSIs, in our
case the base addr of the IMSIC controller. This attribute is being set
only when running irqchip_split() mode with aia=aplic-imsic.
During riscv_aplic_msi_send() we'll check if the attribute was set to
skip the check for a m-mode APLIC controller and to change the resulting
MSI addr by adding kvm_msicfgaddr right before address_space_stl_le().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current logic to determine if we don't need an emulated APLIC
controller, i.e. KVM will provide for us, is to determine if we're
running KVM, with in-kernel irqchip support, and running
aia=aplic-imsic. This is modelled by riscv_is_kvm_aia_aplic_imsic() and
virt_use_kvm_aia_aplic_imsic().
This won't suffice to support irqchip_split() mode: it will match
exactly the same conditions as the one above, but setting the irqchip to
'split' mode will now require us to emulate an APLIC s-mode controller,
like we're doing with 'aia=aplic'.
Create a new riscv_use_emulated_aplic() helper that will encapsulate
this logic. Replace the uses of "riscv_is_kvm_aia_aplic_imsic()" with
this helper every time we're taking a decision on emulate an APLIC
controller or not. Do the same in virt.c with virt_use_emulated_aplic().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The helper is_kvm_aia() is checking not only for AIA, but for
aplic-imsic (i.e. "aia=aplic-imsic" in 'virt' RISC-V machine) with an
in-kernel chip present.
Rename it to be a bit clear what the helper is doing since we'll add
more AIA helpers in the next patches.
Make the helper public because the 'virt' machine will use it as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove definition about LoongArchExtIOI and LOONGARCH_EXTIOI, and
replace them with LoongArchExtIOICommonState and macro
LOONGARCH_EXTIOI_COMMON separately. Also remove unnecessary header
files.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add vmstate pre_save interface, which can be used extioi kvm driver
in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Set TYPE_LOONGARCH_EXTIOI inherit from TYPE_LOONGARCH_EXTIOI_COMMON
object, it shares vmsate and property of TYPE_LOONGARCH_EXTIOI_COMMON,
and has its own realize() function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Rename structure LoongArchExtIOI with LoongArchExtIOICommonState,
since it is defined in file loongarch_extioi_common.h
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Move definiton of structure LoongArchExtIOI from header file loongarch_extioi.h
to file loongarch_extioi_common.h.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add common header file include/hw/intc/loongarch_extioi_common.h, and
move some macro definition from include/hw/intc/loongarch_extioi.h to
the common header file.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Remove definition about LoongArchPCHPIC and LOONGARCH_PCH_PIC, and
replace them with LoongArchPICCommonState and LOONGARCH_PIC_COMMON
separately. Also remove unnecessary header files.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add vmstate pre_save and post_load interfaces, which can be used
by pic kvm driver in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Set TYPE_LOONGARCH_PIC inherit from TYPE_LOONGARCH_PIC_COMMON object,
it shares vmsate and property of TYPE_LOONGARCH_PIC_COMMON, and has
its own realize() function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Move structure LoongArchPCHPIC from header file loongarch_pch_pic.h
to file loongarch_pic_common.h, and rename structure name with
LoongArchPICCommonState.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add common header file hw/intc/loongarch_pic_common.h, and move
some macro definition from hw/intc/loongarch_pch_pic.h to the common
header file.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Now we have official uint32_t bit array functions in bitops.h, use
them instead of the hand-rolled local versions.
We retain gic_bmp_replace_bit() because bitops doesn't provide that
specific functionality.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241108135514.4006953-3-peter.maydell@linaro.org
Loongarch IPI is added here, it inherits from class
TYPE_LOONGSON_IPI_COMMON, and two interfaces get_iocsr_as() and
cpu_by_arch_id() are added for Loongarch 3A5000 machine. It can
be used when ipi is emulated in userspace with KVM mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased and simplified]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-13-philmd@linaro.org>
Move the common code from loongson_ipi.c to loongson_ipi_common.c,
call parent_realize() instead of loongson_ipi_common_realize() in
loongson_ipi_realize().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-12-philmd@linaro.org>
In order to access loongson_ipi_core_read/write helpers
from loongson_ipi_common.c in the next commit, make their
prototype declaration public.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-11-philmd@linaro.org>
Allow Loongson IPI implementations to have their own
cpu_by_arch_id() handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-10-philmd@linaro.org>
Allow Loongson IPI implementations to have their own get_iocsr_as()
handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-9-philmd@linaro.org>
