The pc_compat_2_4[] array was only used by the pc-q35-2.4
and pc-i440fx-2.4 machines, which got removed. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The PCMachineClass::broken_reserved_end field was only used
by the pc-q35-2.4 and pc-i440fx-2.4 machines, which got removed.
Remove it and simplify pc_memory_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These machines has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") they can now be removed.
Remove the qtest in test-x86-cpuid-compat.c file.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Both machines were added with little-endian in mind only (the
"endianness" CPU property was hard-wired to "true", see commits
133d23b3ad and a88bbb006a), so the variants that showed up
on the big endian target likely never worked. We deprecated these
non-working machine variants two releases ago, and so far nobody
complained, so it should be fine now to disable them. Hard-wire
the machines to little endian now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250515132019.569365-4-thuth@redhat.com>
Since the microblaze target can now handle both endianness, big and
little, we should provide a config knob for the user to select the
desired endianness.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250515132019.569365-2-thuth@redhat.com>
This removes the TARGET_S390X and CONFIG_KVM conditions from the
CPU commands that are conceptually specific to s390x. Top level
stubs are provided to cope with non-s390x targets, or builds
without KVM.
The removal of CONFIG_KVM is justified by the fact there is no
conceptual difference between running 'qemu-system-s390x -accel tcg'
on a build with and without KVM built-in, so apps only using TCG
can't rely on the CONFIG_KVM in the schema.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-11-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This file is now empty and can thus be removed.
Observe the pre-existing bug with s390-skeys.c and target/i386/monitor.c
both including qapi-commands-misc-target.h despite not requiring it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-8-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the Xen event channel
commands, moving them to the recently introduced misc-i386.json
QAPI file, given they are inherantly i386 specific commands.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-7-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the SGX confidential
virtualization commands, moving them to the recently introduced
misc-i386.json QAPI file, given they are inherantly i386 specific
commands.
Observe a pre-existing bug that the "SGXEPCSection" struct lacked
a TARGET_I386 condition, despite its only usage being behind a
TARGET_I386 condition.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-6-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This removes the TARGET_I386 condition from the rtc-reset-reinjection
command. This requires providing a QMP command stub for non-i386 target.
This in turn requires moving the command out of misc-target.json, since
that will trigger symbol poisoning errors when built from target
independent code.
Rather than putting the command into misc.json, it is proposed to create
misc-$TARGET.json files to hold commands whose impl is conceptually
only applicable to a single target. This gives an obvious docs hint to
consumers that the command is only useful in relation a specific target,
while misc.json is for commands applicable to 2 or more targets.
The current impl of qmp_rtc_reset_reinject() is a no-op if the i386
RTC is disabled in Kconfig, or if the running machine type lack any
RTC device.
The stub impl for non-i386 targets retains this no-op behaviour.
However, it is now reporting an Error mentioning this command is not
available for current target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20250522190542.588267-2-pierrick.bouvier@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Add the BMC memory region as a subregion of system_memory so that
modules relying on system memory can operate correctly.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250523093144.991408-6-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Map the CA35 memory region as a subregion of system_memory to ensure
a valid FlatView. This prevents failures in APIs that rely on the
global memory view, such as rom_check_and_register_reset().
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250523093144.991408-5-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The unimplemented memory region overlaps with the VBootROM address
range, causing incorrect memory layout.
This patch adjusts the size and start address of the unimplemented
region to avoid collision. The IO memory region (ASPEED_DEV_IOMEM) is
now moved to 0x20000 to reserve space for VBootROM at 0x0.
Although the memory range 0x20000 - 0x10000000 is undefined in the
datasheet and should not be required, further testing shows OP-TEE
or U-Boot may access 0x400000 during early boot.
Removing the unimplemented region causes firmware hangs.
To prevent unexpected accesses, retain the region as a safeguard.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250523093144.991408-4-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reduce ca35 ram size from 2GiB to 1GiB to align with ast2700a1-evb,
where the ram-container is defined as 1GiB in its class.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250523093144.991408-3-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This patch adds network support to the ast2700fc machine by initializing
the NIC device in the ca35.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250523093144.991408-2-steven_lee@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
On big-endian hosts, the aspeed_ram_capacity_write() function previously passed
the address of a 64-bit "data" variable directly to address_space_write(),
assuming host and guest endianness matched.
However, the data is expected to be written in little-endian format to DRAM.
On big-endian hosts, this led to incorrect data being written into DRAM,
which caused the guest firmware to misdetect the DRAM size.
As a result, U-Boot fails to boot and hangs.
- Replaces the "address_space_write()" call with "address_space_stl_le()",
which performs an explicit 32-bit little-endian write.
- Updating the MemoryRegionOps to restrict access to exactly 4 bytes
using .valid.{min,max}_access_size = 4 and .impl.min_access_size = 4.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Fixes: 7436db1 ("aspeed/soc: fix incorrect dram size for AST2700")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250522023305.2486536-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This patch explicitly sets ".impl.min_access_size = 4" to match the
declared ".valid.min_access_size = 4", enforcing stricter access size
checking and preventing inconsistent partial accesses to the interrupt
controller registers.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250522023305.2486536-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
1. Added "hace_hexdump()" to dump a contiguous buffer using qemu_hexdump.
2. Added "hace_iov_hexdump()" to flatten and dump scatter-gather source vectors.
3. Introduced a new trace event: "aspeed_hace_hexdump".
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-17-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the AST2700 design, the data source address is 64-bit, with
R_HASH_SRC_HI storing bits [63:32] and R_HASH_SRC storing bits [31:0].
Similarly, the digest address is 64-bit, with R_HASH_DEST_HI storing bits
[63:32] and R_HASH_DEST storing bits [31:0].
To maintain compatibility with older SoCs such as the AST2600, the AST2700 HW
automatically set bit 34 of the 64-bit sg_addr. As a result, the firmware
only needs to provide a 32-bit sg_addr containing bits [31:0]. This is
sufficient for the AST2700, as it uses a DRAM offset rather than a DRAM
address.
Introduce a has_dma64 class attribute and set it to true for the AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-15-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the AST2700 design, the data source address is 64-bit, with
R_HASH_SRC_HI storing bits [63:32] and R_HASH_SRC storing bits [31:0].
Similarly, the digest address is 64-bit, with R_HASH_DIGEST_HI storing bits
[63:32] and R_HASH_DIGEST storing bits [31:0]. The HMAC key buffer address is also
64-bit, with R_HASH_KEY_BUFF_HI storing bits [63:32] and R_HASH_KEY_BUFF storing
bits [31:0].
The AST2700 supports a maximum DRAM size of 8 GB, with a DRAM addressable range
from 0x0_0000_0000 to 0x1_FFFF_FFFF. Since this range fits within 34 bits, only
bits [33:0] are needed to store the DRAM offset. To optimize address storage,
the high physical address bits [1:0] of the source, digest and key buffer
addresses are stored as dram_offset bits [33:32].
To achieve this, a src_hi_mask with a mask value of 0x3 is introduced, ensuring
that src_addr_hi consists of bits [1:0]. The final src_addr is computed as
(src_addr_hi[1:0] << 32) | src_addr[31:0], representing the DRAM offset within
bits [33:0].
Similarly, a dest_hi_mask with a mask value of 0x3 is introduced to ensure that
dest_addr_hi consists of bits [1:0]. The final dest_addr is calculated as
(dest_addr_hi[1:0] << 32) | dest_addr[31:0], representing the DRAM offset within
bits [33:0].
Additionally, a key_hi_mask with a mask value of 0x3 is introduced to ensure
that key_buf_addr_hi consists of bits [1:0]. The final key_buf_addr is
determined as (key_buf_addr_hi[1:0] << 32) | key_buf_addr[31:0], representing
the DRAM offset within bits [33:0].
This approach eliminates the need to reduce the high part of the DRAM physical
address for DMA operations. Previously, this was calculated as
(high physical address bits [7:0] - 4), since the DRAM start address is
0x4_00000000, making the high part address [7:0] - 4.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-14-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Dynamically allocate the register array by removing the hardcoded
ASPEED_HACE_NR_REGS macro.
To support different register sizes across SoC variants, introduce a new
"nr_regs" class attribute and replace the static "regs" array with dynamically
allocated memory.
Add a new "aspeed_hace_unrealize" function to properly free the allocated "regs"
memory during device cleanup.
Remove the bounds checking in the MMIO read/write handlers since the
MemoryRegion size now matches the (register array size << 2).
This commit updates the VMState fields accordingly. The VMState version was
already bumped in a previous patch of this series, so no further version change
is needed.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-13-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Enable accumulative mode for direct access mode operations. In direct access
mode, only a single source buffer is used, so the "iovec" count is set to 1.
If "acc_mode" is enabled:
1. Accumulate "total_req_len" with the current request length ("plen").
2. Check for padding and determine whether this is the final request.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-12-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Renaming R_HASH_DEST to R_HASH_DIGEST for better semantic clarity.
The AST2700 CPU, based on the Cortex-A35, features a 64-bit DRAM address space.
To prepare for future AST2700 support, this change introduces a new helper
function hash_get_digest_addr() to encapsulate digest address extraction logic
and improve code readability.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-11-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The AST2700 CPU, based on the Cortex-A35, is a 64-bit processor, and its DRAM
address space is also 64-bit. To support future AST2700 updates, the source
hash buffer address data type is being updated to 64-bit.
Introduces the "hash_get_source_addr()" helper function to extract the source hash
buffer address.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-10-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
To improve code readability and maintainability of do_hash_operation(), this
commit introduces a new helper function: hash_execute_acc_mode().
This function encapsulates the full flow for accumulation mode, including
context initialization, update, conditional finalization, and digest writeback
with I/O vector unmapping.
No functional changes are introduced.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-9-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
To improve code readability and maintainability of do_hash_operation(), this
commit introduces a new helper function: hash_execute_non_acc_mode().
The helper encapsulate the hashing logic for non-accumulation mode.
No functional changes are introduced.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-8-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
To improve code readability and maintainability of do_hash_operation(), this
commit introduces a new helper function: hash_write_digest_and_unmap_iov().
The helper consolidates the final digest writeback and subsequent unmapping of
the I/O vectors into a single routine.
No functional changes are introduced.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-7-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
To improve code readability and maintainability of do_hash_operation(), this
commit introduces a new helper function: hash_prepare_sg_iov().
This function handles scatter-gather (SG) mode setup, including SG list
parsing, address mapping, and optional accumulation mode support with
padding detection.
No functional changes are introduced.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
To improve code readability and maintainability of do_hash_operation(), this
commit introduces a new helper function: hash_prepare_direct_iov().
This function encapsulates the logic for setting up the I/O vector (iov)
in direct mode (non-scatter-gather).
No functional changes are introduced.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, if the program encounters an unsupported algorithm, it does not set
the HASH_IRQ bit in the status register and send an interrupt to indicate
command completion. As a result, the FW gets stuck waiting for a completion
signal from the HACE module.
Additionally, in do_hash_operation, if an error occurs within the conditional
statement, the HASH_IRQ bit is not set in the status register. This causes the
firmware to continuously send HASH commands, as it is unaware that the HACE
model has completed processing the command.
To fix this, the HASH_IRQ bit in the status register must always be set to
ensure that the firmware receives an interrupt from the HACE module, preventing
it from getting stuck or repeatedly sending HASH commands.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Fixes: c5475b3 ("hw: Model ASPEED's Hash and Crypto Engine")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, users define multiple local variables within different if-statements.
To improve readability and maintain consistency in variable naming, rename the
variables accordingly.
Introduced "sg_addr" to clearly indicate the scatter-gather mode buffer address.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In the previous design of the hash framework, accumulative hashing was not
supported. To work around this limitation, commit 5cd7d85 introduced an
iov_cache array to store all the hash data from firmware.
Once the ASPEED HACE model collected all the data, it passed the iov_cache to
the hash API to calculate the final digest.
However, with commit e3c0752, the hash framework now supports accumulative
hashing. This allows us to refactor the ASPEED HACE model, removing redundant
logic and simplifying the implementation for better readability and
maintainability.
As a result, the iov_count variable is no longer needed—it was previously used
to track how many cached entries were used for hashing.
To maintain VMSTATE compatibility after removing this field, the VMSTATE_VERSION
is bumped to 2
This cleanup follows significant changes in commit 4c1d0af4a2, making the
model more readable.
- Deleted "iov_cache" and "iov_count" from "AspeedHACEState".
- Removed "reconstruct_iov" function and related logic.
- Simplified "do_hash_operation" by eliminating redundant checks.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250515081008.583578-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
There is no need to allocate initialized memory with g_malloc0()
if it's directly followed by a memset() function call. g_malloc()
is sufficient.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20250515054429.7385-5-vr_qemu@t-online.de>
AUD_open_out() may fail and return NULL. This may then lead to
a segmentation fault in memset() below. The memset() behaviour
is undefined if the pointer to the destination object is a null
pointer.
Add the missing error handling code.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20250515054429.7385-4-vr_qemu@t-online.de>
Allow the guest to submit FUA requests directly, instead of forcing it
to emulate them using a regular flush.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-ID: <20250502121115.3613717-3-afaria@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Simply propagate the FUA flag on write requests to the driver. The block
layer will emulate it if necessary.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-ID: <20250502121115.3613717-2-afaria@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Prepare for adding more fields to RISCVCPUDef and reading them in
riscv_cpu_init: instead of storing the misa_mxl_max field in
RISCVCPUClass, ensure that there's always a valid RISCVCPUDef struct
and go through it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Almost all users of cpu->cfg.satp_mode care about the "max" value
satp_mode_max_from_map(cpu->cfg.satp_mode.map). Convert the QOM
properties back into it. For TCG, deduce the bitmap of supported modes
from valid_vm[].
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not create the RHCT MMU type entry for RV32 CPUs, since it
only has definitions for SV39/SV48/SV57. Likewise, check that
satp_mode_max_from_map() will actually return a valid value, skipping
the MMU type entry if all MMU types were disabled on the command line.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QAPI requires strict PascalCase naming style, i.e., only the first
letter of a single word is allowed to be uppercase, which could help
with readability.
Rename SGXInfo to SgxInfo.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250516091130.2374221-3-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QAPI requires strict PascalCase naming style, i.e., only the first
letter of a single word is allowed to be uppercase, which could help
with readability.
Rename SGXEPCSection to SgxEpcSection.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250516091130.2374221-2-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pci_host_data_be_ops became unused after endianness fixes
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Rakesh Jeyasingh <rakeshjb010@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20250429170354.150581-3-rakeshjb010@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The GT-64120 PCI controller requires special handling where:
1. Host bridge(bus 0 ,device 0) must never be byte-swapped
2. Other devices follow MByteSwap bit in GT_PCI0_CMD
The previous implementation incorrectly swapped all accesses, breaking
host bridge detection (lspci -d 11ab:4620).
Changes made:
1. Removed gt64120_update_pci_cfgdata_mapping() and moved data_mem initialization
to gt64120_realize() for cleaner setup
2. Implemented custom read/write handlers that:
- Preserve host bridge accesses (extract32(config_reg,11,13)==0)
- apply swapping only for non-bridge devices in big-endian mode
Fixes: 145e2198 ("hw/mips/gt64xxx_pci: Endian-swap using PCI_HOST_BRIDGE MemoryRegionOps")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2826
Signed-off-by: Rakesh Jeyasingh <rakeshjb010@gmail.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20250429170354.150581-2-rakeshjb010@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can avoid the 'long' casts by using PRIx64 and HWADDR_PRIx on the fmt
strings for uint64_t and hwaddr types.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Change create_fdt_pcie(), create_fdt_reset(), create_fdt_uart() and
create_fdt_rtc() to use s->memmap in their logic.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt_virtio() can use s->memmap instead of having an extra
argument for it.
While we're at it rewrite it a little bit to avoid the clunky line in
'name' and code repetition:
- declare 'virtio_base' out of the loop since it never changes;
- declare a 'size' variable. Use it to calculate the address of the
virtio device in an 'addr' variable;
- use 'addr' in the 'name' g_strdup_printf();
- use 'addr' and 'size' when creating the 'reg' property.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt_sockets() and all its fdt helpers (create_fdt_socket_aplic(),
create_fdt_imsic(), create_fdt_socket_plic(), create_fdt_socket_aclint()
and create_fdt_socket_memory()) can use s->memmap from their
RISCVVirtState pointer instead of having an extra memmap argument.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt(), create_fdt_flash() and create_fdt_fw_cfg() can access the
memmap via their RISCVVirtState pointers.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
