We are already in January 2025! Update copyright notices.
Cc: peter.maydell@linaro.org
Cc: qemu-trivial@nongnu.org
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20250101080116.1050336-1-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Allow more than 4 legacy IRQs on Generic PCI Express Bridge (Alexander)
- Add MMIO-based Inter-VM shared memory device 'ivshmem-flat' (Gustavo)
- Use UHCI register definitions (Guenter)
- Propagate CPU endianness to microblaze_load_kernel (Philippe)
- Mark x86/TriCore devices as little-endian, OpenRISC/SPARC as big (Philippe)
- Don't set callback_opaque NULL in fw_cfg_modify_bytes_read (Shameer)
- Simplify non-KVM checks on AMD IOMMU XTSup feature (Philippe)
- Trivial cleanups on xilinx_ethlite, vmcoreinfo, qxl (Philippe, Hyman)
- Move USB-HCD-XHCI msi/msix properties from NEC to superclass (Phil)
- Redesign of main thread event handling due to macOS Cocoa (Phil)
- Introduce ParavirtualizedGraphics.Framework support 'apple-gfx' (Phil)
- Pad short Ethernet frames on macOS vmnet (William)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmd0Ul0ACgkQ4+MsLN6t
wN7sCA/9HFWahKYW+6Y+gHfLPvJzkIqC5mwfQAUY7GsrNVFdIpUjK9ln9xUEqCQz
DkVxoZQcP++d8cnnl17wXHsRcavyDDadGU5/161eNC7fbKbLRAslObz/dtExxDn2
sctx9HMcbLl1UMFPqi/Pbt8NEZr0iOLzDDl+nRuOK8QRFnd2zGm1lF1oHeyja3t1
flnQKI9YD0U/+0RVNR2FOpUam2Fu1EuQEPp0jMwkmcoyoNLwCXrP9XyRybVZnzgM
cFm9fYbVlwjsVia+Bsk3CmHX5Gna/1bS3CL8Y9gUScYYwYU5VDAA8Fvv4gPsa4+u
WSyttL2qCFdgF75S5FoAvEQzYFBcw25eFf8jJhbEn4I6MuQew8lww5OZEyvE8rag
2hg3nc4W0x76mLunqrNm+h+Z3vqd/amFcd9YNZjpzxQK//TwvOAQTWi31VtWa4OF
F1qdv78tQKkRY7noq8WkcL/io6D7iE/BMx/XIOF8uPf8BLIBMvPDnDABjaB/yLkS
Q/e+/monxkhknDY6K9xkVei7rn6c0LkuLzKxVzEzVKPVzM8N0JAl/1KaNVO8fxjJ
kLvfGP/RdYOZqG4dNi8W3PhV/+UZz1FS3L1MpI4NXQ59br57BbVQP9ARGO6WpPWn
O9zIJOAqdzcWU0aULIsvQA3nC1iJnFHEovq0bl8qBbY51k26Lg0=
=AL3L
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20241231' of https://github.com/philmd/qemu into staging
Misc HW patches queue
- Allow more than 4 legacy IRQs on Generic PCI Express Bridge (Alexander)
- Add MMIO-based Inter-VM shared memory device 'ivshmem-flat' (Gustavo)
- Use UHCI register definitions (Guenter)
- Propagate CPU endianness to microblaze_load_kernel (Philippe)
- Mark x86/TriCore devices as little-endian, OpenRISC/SPARC as big (Philippe)
- Don't set callback_opaque NULL in fw_cfg_modify_bytes_read (Shameer)
- Simplify non-KVM checks on AMD IOMMU XTSup feature (Philippe)
- Trivial cleanups on xilinx_ethlite, vmcoreinfo, qxl (Philippe, Hyman)
- Move USB-HCD-XHCI msi/msix properties from NEC to superclass (Phil)
- Redesign of main thread event handling due to macOS Cocoa (Phil)
- Introduce ParavirtualizedGraphics.Framework support 'apple-gfx' (Phil)
- Pad short Ethernet frames on macOS vmnet (William)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmd0Ul0ACgkQ4+MsLN6t
# wN7sCA/9HFWahKYW+6Y+gHfLPvJzkIqC5mwfQAUY7GsrNVFdIpUjK9ln9xUEqCQz
# DkVxoZQcP++d8cnnl17wXHsRcavyDDadGU5/161eNC7fbKbLRAslObz/dtExxDn2
# sctx9HMcbLl1UMFPqi/Pbt8NEZr0iOLzDDl+nRuOK8QRFnd2zGm1lF1oHeyja3t1
# flnQKI9YD0U/+0RVNR2FOpUam2Fu1EuQEPp0jMwkmcoyoNLwCXrP9XyRybVZnzgM
# cFm9fYbVlwjsVia+Bsk3CmHX5Gna/1bS3CL8Y9gUScYYwYU5VDAA8Fvv4gPsa4+u
# WSyttL2qCFdgF75S5FoAvEQzYFBcw25eFf8jJhbEn4I6MuQew8lww5OZEyvE8rag
# 2hg3nc4W0x76mLunqrNm+h+Z3vqd/amFcd9YNZjpzxQK//TwvOAQTWi31VtWa4OF
# F1qdv78tQKkRY7noq8WkcL/io6D7iE/BMx/XIOF8uPf8BLIBMvPDnDABjaB/yLkS
# Q/e+/monxkhknDY6K9xkVei7rn6c0LkuLzKxVzEzVKPVzM8N0JAl/1KaNVO8fxjJ
# kLvfGP/RdYOZqG4dNi8W3PhV/+UZz1FS3L1MpI4NXQ59br57BbVQP9ARGO6WpPWn
# O9zIJOAqdzcWU0aULIsvQA3nC1iJnFHEovq0bl8qBbY51k26Lg0=
# =AL3L
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 31 Dec 2024 15:21:49 EST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20241231' of https://github.com/philmd/qemu: (29 commits)
hw/display/qxl: Do not use C99 // comments
net/vmnet: Pad short Ethernet frames
MAINTAINERS: Add myself as maintainer for apple-gfx, reviewer for HVF
hw/display/apple-gfx: Adds configurable mode list
hw/display/apple-gfx: Adds PCI implementation
hw/display/apple-gfx: Introduce ParavirtualizedGraphics.Framework support
ui & main loop: Redesign of system-specific main thread event handling
hw/usb/hcd-xhci: Unimplemented/guest error logging for port MMIO
hw/usb/hcd-xhci-pci: Move msi/msix properties from NEC to superclass
hw/block/virtio-blk: Replaces request free function with g_free
hw/i386/amd_iommu: Simplify non-KVM checks on XTSup feature
hw/misc/vmcoreinfo: Rename opaque pointer as 'opaque'
hw/misc/vmcoreinfo: Declare QOM type using DEFINE_TYPES macro
fw_cfg: Don't set callback_opaque NULL in fw_cfg_modify_bytes_read()
hw/net/xilinx_ethlite: Rename rxbuf -> port_index
hw/net/xilinx_ethlite: Correct maximum RX buffer size
hw/net/xilinx_ethlite: Update QOM style
hw/net/xilinx_ethlite: Remove unuseful debug logs
hw/net/xilinx_ethlite: Convert some debug logs to trace events
hw/sparc: Mark devices as big-endian
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not use C99 // comments to fix the checkpatch.pl error
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <7d287eaf00e0b52b600431efd350b15a0b5b3544.1734633496.git.yong.huang@smartx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
At least on macOS 12.7.2, vmnet doesn't pad Ethernet frames, such as the
host's ARP replies, to the minimum size (60 bytes before the frame check
sequence) defined in IEEE Std 802.3-2022, so guests' Ethernet device
drivers may drop them with "frame too short" errors.
This patch calls eth_pad_short_frame() to add padding, as in net/tap.c
and net/slirp.c. Thanks to Bin Meng, Philippe Mathieu-Daudé, and Phil
Dennis-Jordan for reviewing earlier versions.
Signed-off-by: William Hooper <wsh@wshooper.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2058
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20241102205653.30476-1-wsh@wshooper.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
I'm happy to take responsibility for the macOS PV graphics code. As
HVF patches don't seem to get much attention at the moment, I'm also
adding myself as designated reviewer for HVF and x86 HVF to try and
improve that.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <rbolshakov@ddn.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241223221645.29911-6-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This change adds a property 'display_modes' on the graphics device
which permits specifying a list of display modes. (screen resolution
and refresh rate)
The property is an array of a custom type to make the syntax slightly
less awkward to use, for example:
-device '{"driver":"apple-gfx-pci", "display-modes":["1920x1080@60", "3840x2160@60"]}'
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-5-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This change wires up the PCI variant of the paravirtualised
graphics device, mainly useful for x86-64 macOS guests, implemented
by macOS's ParavirtualizedGraphics.framework. It builds on code
shared with the vmapple/mmio variant of the PVG device.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-4-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
MacOS provides a framework (library) that allows any vmm to implement a
paravirtualized 3d graphics passthrough to the host metal stack called
ParavirtualizedGraphics.Framework (PVG). The library abstracts away
almost every aspect of the paravirtualized device model and only provides
and receives callbacks on MMIO access as well as to share memory address
space between the VM and PVG.
This patch implements a QEMU device that drives PVG for the VMApple
variant of it.
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-authored-by: Alexander Graf <graf@amazon.com>
Subsequent changes:
* Cherry-pick/rebase conflict fixes, API use updates.
* Moved from hw/vmapple/ (useful outside that machine type)
* Overhaul of threading model, many thread safety improvements.
* Asynchronous rendering.
* Memory and object lifetime fixes.
* Refactoring to split generic and (vmapple) MMIO variant specific
code.
Implementation wise, most of the complexity lies in the differing threading
models of ParavirtualizedGraphics.framework, which uses libdispatch and
internal locks, versus QEMU, which heavily uses the BQL, especially during
memory-mapped device I/O. Great care has therefore been taken to prevent
deadlocks by never calling into PVG methods while holding the BQL, and
similarly never acquiring the BQL in a callback from PVG. Different strategies
have been used (libdispatch, blocking and non-blocking BHs, RCU, etc.)
depending on the specific requirements at each framework entry and exit point.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-3-phil@philjordan.eu>
[PMD: Re-ordered imported headers, style fixups]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
macOS's Cocoa event handling must be done on the initial (main) thread
of the process. Furthermore, if library or application code uses
libdispatch, the main dispatch queue must be handling events on the main
thread as well.
So far, this has affected Qemu in both the Cocoa and SDL UIs, although
in different ways: the Cocoa UI replaces the default qemu_main function
with one that spins Qemu's internal main event loop off onto a
background thread. SDL (which uses Cocoa internally) on the other hand
uses a polling approach within Qemu's main event loop. Events are
polled during the SDL UI's dpy_refresh callback, which happens to run
on the main thread by default.
As UIs are mutually exclusive, this works OK as long as nothing else
needs platform-native event handling. In the next patch, a new device is
introduced based on the ParavirtualizedGraphics.framework in macOS.
This uses libdispatch internally, and only works when events are being
handled on the main runloop. With the current system, it works when
using either the Cocoa or the SDL UI. However, it does not when running
headless. Moreover, any attempt to install a similar scheme to the
Cocoa UI's main thread replacement fails when combined with the SDL
UI.
This change tidies up main thread management to be more flexible.
* The qemu_main global function pointer is a custom function for the
main thread, and it may now be NULL. When it is, the main thread
runs the main Qemu loop. This represents the traditional setup.
* When non-null, spawning the main Qemu event loop on a separate
thread is now done centrally rather than inside the Cocoa UI code.
* For most platforms, qemu_main is indeed NULL by default, but on
Darwin, it defaults to a function that runs the CFRunLoop.
* The Cocoa UI sets qemu_main to a function which runs the
NSApplication event handling runloop, as is usual for a Cocoa app.
* The SDL UI overrides the qemu_main function to NULL, thus
specifying that Qemu's main loop must run on the main
thread.
* The GTK UI also overrides the qemu_main function to NULL.
* For other UIs, or in the absence of UIs, the platform's default
behaviour is followed.
This means that on macOS, the platform's runloop events are always
handled, regardless of chosen UI. The new PV graphics device will
thus work in all configurations. There is no functional change on other
operating systems.
Implementing this via a global function pointer variable is a bit
ugly, but it's probably worth investigating the existing UI thread rule
violations in the SDL (e.g. #2537) and GTK+ back-ends. Fixing those
issues might precipitate requirements similar but not identical to those
of the Cocoa UI; hopefully we'll see some kind of pattern emerge, which
can then be used as a basis for an overhaul. (In fact, it may turn
out to be simplest to split the UI/native platform event thread from the
QEMU main event loop on all platforms, with any UI or even none at all.)
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-2-phil@philjordan.eu>
[PMD: Declare 'qemu_main' symbol in tests/qtest/fuzz/fuzz.c,
add missing g_assert_not_reached() call in main()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The XHCI device code uses tracing rather than logging on various code
paths that are so far unimplemented. In some cases, these code paths
actually indicate faulty guest software. This patch switches instances
in the read and write handlers for the port MMIO region to use
qemu_log_mask() with LOG_UNIMP or LOG_GUEST_ERROR, as appropriate in
each case.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241227121336.25838-5-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The NEC XHCI controller exposes the underlying PCI device's msi and
msix properties, but the superclass and thus the qemu-xhci device do
not. There does not seem to be any obvious reason for this limitation.
This change moves these properties to the superclass so they are
exposed by both PCI XHCI device variants.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241227121336.25838-3-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The virtio_blk_free_request() function has been a 1-liner forwarding
to g_free() for a while now. We may as well call g_free on the request
pointer directly.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-14-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Generic code wanting to access KVM specific methods should
do so being protected by the 'kvm_enabled()' helper.
Doing so avoid link failures when optimization is disabled
(using --enable-debug), see for example commits c04cfb4596
("hw/i386: fix short-circuit logic with non-optimizing builds")
and 0266aef8cd ("amd_iommu: Fix kvm_enable_x2apic link error
with clang in non-KVM builds").
XTSup feature depends on KVM, so protect the whole block
checking the XTSup feature with a check on whether KVM is
enabled.
Since x86_cpus_init() already checks APIC ID > 255 imply
kernel support for irqchip and X2APIC, remove the confuse
and unlikely reachable "AMD IOMMU xtsup=on requires support
on the KVM side" message.
Fix a type in "configuration" in error message.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Message-Id: <20241129155802.35534-1-philmd@linaro.org>
Both QEMUResetHandler and FWCfgWriteCallback take an opaque
pointer argument, no need to cast.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241219153857.57450-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241219153857.57450-2-philmd@linaro.org>
On arm/virt platform, Chen Xiang reported a Guest crash while
attempting the below steps,
1. Launch the Guest with nvdimm=on
2. Hot-add a NVDIMM dev
3. Reboot
4. Guest boots fine.
5. Reboot again.
6. Guest boot fails.
QEMU_EFI reports the below error:
ProcessCmdAddPointer: invalid pointer value in "etc/acpi/tables"
OnRootBridgesConnected: InstallAcpiTables: Protocol Error
Debugging shows that on first reboot(after hot adding NVDIMM),
Qemu updates the etc/table-loader len,
qemu_ram_resize()
fw_cfg_modify_file()
fw_cfg_modify_bytes_read()
And in fw_cfg_modify_bytes_read() we set the "callback_opaque" for
the key entry to NULL. Because of this, on the second reboot,
virt_acpi_build_update() is called with a NULL "build_state" and
returns without updating the ACPI tables. This seems to be
upsetting the firmware.
To fix this, don't change the callback_opaque in fw_cfg_modify_bytes_read().
Fixes: bdbb5b1706 ("fw_cfg: add fw_cfg_machine_reset function")
Reported-by: chenxiang <chenxiang66@hisilicon.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-ID: <20241203131806.37548-1-shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
'rxbuf' is the index of the dual port RAM used.
Rename it as 'port_index'.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241112181044.92193-8-philmd@linaro.org>
The current max RX bufsize is set to 0x800. This is
invalid, since it contains the MMIO registers region.
Add the correct definition (valid for both TX & RX,
see datasheet p. 20, Table 11 "XPS Ethernet Lite MAC
Memory Map") and use it.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241112181044.92193-6-philmd@linaro.org>
Use XlnxXpsEthLite typedef, OBJECT_DECLARE_SIMPLE_TYPE macro;
convert type_init() to DEFINE_TYPES().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241112181044.92193-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241112181044.92193-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241112181044.92193-3-philmd@linaro.org>
These devices are only used by the SPARC targets, which are
only built as big-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_BIG_ENDIAN (besides, the
DEVICE_LITTLE_ENDIAN case isn't tested). Simplify directly
using DEVICE_BIG_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241106184612.71897-6-philmd@linaro.org>
The openrisc little-endian control is in a control register:
SR[LEE] (which we do not implement at present).
These devices are only used by the OpenRISC target, which is
only built as big-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_BIG_ENDIAN (besides, the
DEVICE_LITTLE_ENDIAN case isn't tested). Simplify directly
using DEVICE_BIG_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20241106184612.71897-5-philmd@linaro.org>
These devices are only used by the TriCore target, which is
only built as little-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_LITTLE_ENDIAN (besides, the
DEVICE_BIG_ENDIAN case isn't tested). Simplify directly using
DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20241106184612.71897-3-philmd@linaro.org>
These devices are only used by the X86 targets, which are only
built as little-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_LITTLE_ENDIAN (besides, the
DEVICE_BIG_ENDIAN case isn't tested). Simplify directly using
DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20241106184612.71897-2-philmd@linaro.org>
Pass vCPU endianness as argument so we can load kernels
with different endianness (different from the qemu-system-binary
builtin one).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241107012223.94337-3-philmd@linaro.org>
Introduce defines for UHCI registers to simplify adding register access
in subsequent patches of the series.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240906122542.3808997-3-linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fix reported checkpatch issues to prepare for next patches
in the series.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240906122542.3808997-2-linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Because now there is also an MMIO ivshmem device (ivshmem-flat.c), and
ivshmem.c is a PCI specific implementation, rename it to ivshmem-pci.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-ID: <20241216141818.111255-5-gustavo.romero@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a new device, ivshmem-flat, which is similar to the ivshmem PCI but
does not require a PCI bus. It's meant to be used on machines like those
with Cortex-M MCUs, which usually lack a PCI/PCIe bus, e.g. lm3s6965evb
and mps2-an385.
The device currently only supports the sysbus bus.
The new device, just like the ivshmem PCI device, supports both peer
notification via hardware interrupts and shared memory.
The device shared memory size can be set using the 'shmem-size' option
and it defaults to 4 MiB, which is the default size of shmem allocated
by the ivshmem server.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1134
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
[PMD: Rebased updating Property and using DEFINE_TYPES macro]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241216141818.111255-2-gustavo.romero@linaro.org>
This reverts commit 0cb3ff7c22.
The original code was right in that long name in LFN directory
entry uses other parts of the entry for the name too, not just
the original "name" field. So it is wrong to limit the offset
to be within the name field. Some other mechanism is needed
to fix the ubsan report and whole messy usage of bytes past the
given field.
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some boards such as vmapple don't do real legacy PCI IRQ swizzling.
Instead, they just keep allocating more board IRQ lines for each new
legacy IRQ. Let's support that mode by giving instantiators a new
"nr_irqs" property they can use to support more than 4 legacy IRQ lines.
In this mode, GPEX will export more IRQ lines, one for each device.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241223221645.29911-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Remove overlapping memory regions of the "next-cube" machine
* Encapsulate the next-cube SCSI related code into a separate device
* QOM-ify the next-rtc device
* Declare m68k devices as big endian instead of native endian
* Disable the CD-ROM drive for the next-cube machine
-----BEGIN PGP SIGNATURE-----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=js2G
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-12-29' of https://gitlab.com/huth/qemu into staging
* Rework "next-cube" to bring it up-to-date with current coding standards/APIs
* Remove overlapping memory regions of the "next-cube" machine
* Encapsulate the next-cube SCSI related code into a separate device
* QOM-ify the next-rtc device
* Declare m68k devices as big endian instead of native endian
* Disable the CD-ROM drive for the next-cube machine
# -----BEGIN PGP SIGNATURE-----
#
# iQJHBAABCAAxFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmdw93wTHGh1dGhAdHV4
# ZmFtaWx5Lm9yZwAKCRAu2dd0/nAttdVOEACEqPMTb5cea/fsI6x29dxx0btnNZaB
# MhN72qmmGS1GMr03u6hGMrIPgkFa/HQL86SAUxWDt4qg3XJKpJ8p9KLqFm393Dgi
# UEZnvzhX2NP23Cf4M0EaHSAeQOfaYdsgOzivo+7fQUIkpXaRpmu+3VIjvhUESSOb
# 37p1kqdjXf73t7aUMBXA2hCZctm+vOOKdJd25MfrhZp6Yvxly90P2QW+lKzFBUIp
# d2uyZ/FaBXKiGWHMTmpbloIvL6sP8ag/e+deRfKQlBlC3lVpTyREvAKoNret5Rgt
# uYQ1Erbo7Bz8BKrwFrlObbGxn1WoaoCmiPJGzPtn8mfQ33QwS8B3+Np5OfgvinAR
# B6YBXNBIenjUFgJKY9jSXy4IlzfFc4mMKn6kgTv+y9srf9Np1EgmkYuOXxxytPzP
# fE+blTWXgj6EvhUYNtqDgaN0NdW+4YSbr2Lzy/ZNGX7eLJ5S9PZdSU7gb2T+2y2N
# sdAkPiXP1lmTzPkG9gzQ0EljO36gOgSpKWjxf72NvluVGoTBLtKqB8NmVO1YnyVC
# 0/QA/SxZGjsT8MMlhjheWg+lCKRjzTpjfw4C8CvukSsiOHX4pnX9yRreJ2s7z6W3
# 26SxK1nIvn3VODXhXAgB23zHZlgk/lWSJXUuBOsnAk5YMgy7KyDn6r92FNBhj+e2
# 3O0SEi9HC/wUKw==
# =js2G
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 29 Dec 2024 02:17:16 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "huth@tuxfamily.org"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-12-29' of https://gitlab.com/huth/qemu: (35 commits)
next-cube: add my copyright to the top of the file
next-cube: rename old_scr2 and scr2_2 in next_scr2_rtc_update()
next-cube: move next_rtc_cmd_is_write() and next_rtc_data_in_irq() functions
next-cube: add rtc-power-out named gpio to trigger the NEXT_PWR_I interrupt
next-cube: add rtc-cmd-reset named gpio to reset the rtc state machine
next-cube: use named gpio output for next-rtc data
next-cube: move rtc-data-in gpio from next-pc to next-rtc device
next-cube: move reset of next-rtc fields from next-pc to next-rtc
next-cube: QOMify NeXTRTC
next-cube: don't use rtc phase value of -1
next-cube: use named gpio to read RTC data bit in scr2
next-cube: use named gpio to set RTC data bit in scr2
next-cube: always use retval to return rtc read values
next-cube: separate rtc read and write shift logic
next-cube: use qemu_irq to drive int_status in next_scr2_rtc_update()
next-cube: rename typedef struct NextRtc to NeXTRTC
next-cube: convert next-pc device to use Resettable interface
next-cube: rearrange NeXTState declarations to improve readability
next-cube: remove unused next.scr memory region
next-cube: add empty slots for unknown accesses to next.scr memory region
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This series has involved rewriting and/or updating a considerable part of the
next-cube emulation so update the copyright in next-cube.c to reflect this.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-34-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rename them to old_scr2_rtc and scr2_rtc to reflect that they contain the previous
and current values of the SCR2 RTC bits.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-33-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move these functions in next-cube.c so that they are with the rest of the
next-rtc functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-32-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This allows us to decouple the next-pc and next-rtc devices from each
other in next_rtc_data_in_irq().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-31-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This allows us to decouple the next-pc and next-rtc devices from each
other in next_scr2_rtc_update().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-30-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add a named gpio output for the next-rtc data and then update
next_rtc_data_in_irq() to drive the IRQ directly. This enables the next-rtc to
next-pc data to be wired up using the standard qdev gpio APIs.
At the same time rename the pc-rtc-data-in gpio to rtc-data-in which is possible
now that the previous rtc-data-in gpio has been moved to the next-rtc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-29-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add a new rtc-data-out gpio to the next-pc device and wire it up to the next-rtc
rtc-data-in gpio using the standard qdev gpio APIs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-28-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-27-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is to allow the RTC functionality to be maintained within its own separate
device rather than as part of the next-pc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-26-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The rtc phase value of -1 is directly equivalent to using a phase value of 0 so
simplify the logic to use an initial rtc phase of 0.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-25-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is in preparation for moving NeXTRTC to its own separate device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-24-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is in preparation for moving NeXTRTC to its own separate device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-23-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Instead of shifting out rtc read values from individual rtc registers, change
the logic so that rtc read commands are executed when the last bit of the rtc
command is received and the result stored in retval. This simplifies the rtc
read logic such that the shift out logic can be consolidated for rtc phases
between 8 and 16.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-22-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Introduce a new next_rtc_cmd_is_write() function to determine if an rtc command
is a read or write, and start by using it to avoid shifting the rtc input value
if a rtc read command is executed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rather than directly clear bit 3 in int_status in next_scr2_rtc_update(), use
a qemu_irq to drive the equivalent NEXT_PWR_I signal.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This brings the capitalisation in line with the other NeXTCube definitions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
