'vaddr' type is declared in "exec/vaddr.h".
"exec/translation-block.h" uses this type without including
the corresponding header. It works because this header is
indirectly included, but won't work when the other headers
are refactored:
include/exec/translation-block.h:56:5: error: unknown type name 'vaddr'
56 | vaddr pc;
| ^
Explitly include "exec/vaddr.h" to avoid such problem in a
few commits.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-4-philmd@linaro.org>
"exec/cpu-defs.h" should be kept as minimal as possible;
besides these includes don't seem necessary. Remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-3-philmd@linaro.org>
TARGET_PAGE_BITS is defined in each target "cpu-param.h",
itself included by "exec/cpu-defs.h".
Include the latter in order to avoid when refactoring:
In file included from ../../system/watchpoint.c:23:
include/exec/cpu-all.h:356:19: error: use of undeclared identifier 'TARGET_PAGE_BITS'
356 | QEMU_BUILD_BUG_ON(TLB_FLAGS_MASK & TLB_SLOW_FLAGS_MASK);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-2-philmd@linaro.org>
abi_ptr is expected to be used in user emulation.
tlb_vaddr_to_host() uses it, but can be used in
system emulation. Replace the type by 'vaddr' which
is equivalent on user emulation but also works on
system.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-13-philmd@linaro.org>
translator.c indirectly gets "exec/tswap.h" declarations via
"exec/cpu-all.h". Include it directly to be able to remove the
former from the latter, otherwise we get:
accel/tcg/translator.c:433:15: error: call to undeclared function 'tswap16'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
433 | tgt = tswap16(raw);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241211230357.97036-4-philmd@linaro.org>
"disas/dis-asm.h" defines bfd_vma and disassemble_info,
include it in order to avoid (when refactoring other
headers):
tcg/tci.c:1066:20: error: unknown type name 'bfd_vma'
int print_insn_tci(bfd_vma addr, disassemble_info *info)
^
tcg/tci.c:1066:34: error: unknown type name 'disassemble_info'
int print_insn_tci(bfd_vma addr, disassemble_info *info)
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241218155202.71931-3-philmd@linaro.org>
"exec/confidential-guest-support.h" is specific to system
emulation, so move it under the system/ namespace.
Mechanical change doing:
$ sed -i \
-e 's,exec/confidential-guest-support.h,sysemu/confidential-guest-support.h,' \
$(git grep -l exec/confidential-guest-support.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20241218155913.72288-2-philmd@linaro.org>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
"system/confidential-guest-support.h" is not needed,
remove it. Reorder #ifdef'ry to reduce declarations
exposed on user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20241218155913.72288-3-philmd@linaro.org>
Always explicitly create QEMU system containers upfront.
Root containers will be created when trying to fetch the root object the
1st time. They are:
/objects
/chardevs
/backend
Machine sub-containers will be created only until machine is being
initialized. They are:
/machine/unattached
/machine/peripheral
/machine/peripheral-anon
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-8-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
QEMU will start to not rely on implicit creations of containers soon. Make
PPC drc devices follow by explicitly create the container whenever a drc
device is realized, dropping container_get() calls.
No functional change intended.
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: Harsh Prateek Bora <harshpb@linux.ibm.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-7-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
container_get() is going to become strict on not allowing to return a
non-container.
Switch the e500 user to use object_resolve_path_component() explicitly.
Cc: Bharat Bhushan <r65777@freescale.com>
Cc: qemu-ppc@nongnu.org
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20241121192202.4155849-6-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Drop one use of container_get(), instead switch to the explicit function to
create a container.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20241121192202.4155849-5-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
test-qdev-global-props creates a few subprocesses and test things based on
qdev realize(). One thing was overlooked since the start, that anonymous
creations of qdev (then realize() the device) requires the machine object's
presence, as all these devices need to be attached to QOM tree, by default
to path "/machine/unattached".
The test didn't crash simply because container_get() has an implicit
semantic to silently create any missing container, hence what happened here
is container_get() (when running these tests) will try to create containers
at QOM path "/machine" on the fly. That's probably unexpected by the test,
but worked like charm before.
We're going to fix device_set_realized() soon, but before that make the
test case prepared, by creating the machine object on its own.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20241121192202.4155849-4-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
To move towards explicit creations of containers, starting that by
providing a helper for creating container objects.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241121192202.4155849-3-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Provide a macro for the container type across QEMU source tree, rather than
hard code it every time.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20241121192202.4155849-2-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently -d guest_errors enables logging of different invalid actions
by the guest such as misusing hardware, accessing missing features or
invalid memory areas. The memory access logging can be quite verbose
which obscures the other messages enabled by this debug switch so
separate it by adding a new -d invalid_mem option to make it possible
to control it independently of other guest error logs.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <1bb0d0e91ba14aca13056df3b0a774f89cbf966c.1730549443.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
MacOS unconditionally disables interrupts of the physical timer on boot
and then continues to use the virtual one. We don't really want to support
a full physical timer emulation, so let's just ignore those writes.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20230830161425.91946-5-graf@amazon.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a CPU entry for the RV64 XiangShan NANHU CPU which
supports single-core and dual-core configurations. More
details can be found at
https://docs.xiangshan.cc/zh-cn/latest/integration/overview
Signed-off-by: MollyChen <xiaoou@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241205073622.46052-1-xiaoou@iscas.ac.cn>
[ Changes by AF
- Fixup code formatting
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
ssstateen is defined in RVA22 as:
"Supervisor-mode view of the state-enable extension. The supervisor-mode
(sstateen0-3) and hypervisor-mode (hstateen0-3) state-enable registers
must be provided."
Add ssstateen as a named feature that is available if we also have
smstateen.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20241113171755.978109-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 68c9e54bea handled a situation where a warning was being shown
when using the 'sifive_e' cpu when disabling the named extension zic64b.
It makes little sense to show user warnings for named extensions that
users can't control, and the solution taken was to disable zic64b
manually in riscv_cpu_update_named_features().
This solution won't scale well when adding more named features, and can
eventually end up repeating riscv_cpu_disable_priv_spec_isa_exts().
Change riscv_cpu_disable_priv_spec_isa_exts() to not show warnings when
disabling a named feature. This will accomplish the same thing we're
doing today while avoiding having two points where we're disabling
exts via priv_ver mismatch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241113171755.978109-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rather than relying on implicit includes, explicit them,
in order to avoid when refactoring unrelated headers:
target/riscv/internals.h:49:15: error: use of undeclared identifier 'PRV_S'
49 | ret = PRV_S;
| ^
target/riscv/internals.h:93:9: error: call to undeclared function 'env_archcpu'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
93 | if (env_archcpu(env)->cfg.ext_zfinx) {
| ^
target/riscv/internals.h:101:15: error: unknown type name 'float32'; did you mean 'float'?
101 | static inline float32 check_nanbox_s(CPURISCVState *env, uint64_t f)
| ^~~~~~~
| float
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241203200828.47311-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rather than relying on implicit includes, explicit them,
in order to avoid when refactoring unrelated headers:
target/riscv/vector_internals.h:36:12: error: call to undeclared function 'FIELD_EX32'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
36 | return FIELD_EX32(simd_data(desc), VDATA, NF);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241203200828.47311-2-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The spec explicitly says svukte doesn't support RV32. So check that it
is not enabled in RV32.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-7-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add "svukte" in the ISA string when svukte extension is enabled.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-6-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Follow the Svukte spec, do the memory access address checking
1. Include instruction fetches or explicit memory accesses
2. System run in effective privilege U or VU
3. Check senvcfg[UKTE] being set, or hstatus[HUKTE] being set if
instruction is HLV, HLVX, HSV and execute from U mode to VU mode
4. Depend on Sv39 and check virtual addresses bit[SXLEN-1]
5. Raises a page-fault exception corresponding to the original access
type.
Ref: https://github.com/riscv/riscv-isa-manual/pull/1564/files
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-5-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Svukte extension add HUKTE bit, bit[24] in hstatus CSR. The written
value will be masked when the svukte extension is not enabled.
When hstatus[HUKTE] bit is set, HLV/HLVX/HSV work in the U-mode should
do svukte check.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-4-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Svukte extension add UKTE bit, bit[8] in senvcfg CSR. The bit will be
supported when the svukte extension is enabled.
When senvcfg[UKTE] bit is set, the memory access from U-mode should do
the svukte check only except HLV/HLVX/HSV H-mode instructions which
depend on hstatus[HUKTE].
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-3-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Refer to the draft of svukte extension from:
https://github.com/riscv/riscv-isa-manual/pull/1564
Svukte provides a means to make user-mode accesses to supervisor memory
raise page faults in constant time, mitigating attacks that attempt to
discover the supervisor software's address-space layout.
Signed-off-by: Fea.Wang <fea.wang@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241203034932.25185-2-fea.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
DTB is placed to the end of memory, so we will check if the start
address of DTB overlaps to the address of kernel/initrd.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241120153935.24706-4-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a new struct RISCVBootInfo to sync boot information between multiple
boot functions.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241120153935.24706-3-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Larger initrd image will overlap the DTB at 3GB address. Since 64-bit
system doesn't have 32-bit addressable issue, we just load DTB to the end
of dram in 64-bit system.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241120153935.24706-2-jim.shu@sifive.com>
[ Changes by AF
- Store fdt_load_addr_hi32 in the reset vector
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Looking at htif_mm_ops[] read/write handlers, we notice they
expect 32-bit values to accumulate into to the 'fromhost' and
'tohost' 64-bit variables. Explicit by setting the .impl
min/max fields.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241129154304.34946-4-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since our RISC-V system emulation is only built for little
endian, the HTIF device aims to interface with little endian
memory accesses, thus we can explicit htif_mm_ops:endianness
being DEVICE_LITTLE_ENDIAN.
In that case tswap64() is equivalent to le64_to_cpu(), as in
"convert this 64-bit little-endian value into host cpu order".
Replace to simplify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241129154304.34946-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The HTIF interface is RISC-V specific, add
it within the MAINTAINERS section covering
hw/riscv/.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241129154304.34946-2-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Update the SPCR table to accommodate the SPCR Table revision 4 [1].
The SPCR table has been modified to adhere to the revision 4 format [2].
[1]: https://learn.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table
[2]: https://github.com/acpica/acpica/pull/931
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20241028015744.624943-3-jeeheng.sia@starfivetech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241028015744.624943-2-jeeheng.sia@starfivetech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a basic board with interrupt controller (intc), timer, serial
(uartlite), small memory called LMB@0 (128kB) and DDR@0x80000000
(configured via command line eg. -m 2g).
This is basic configuration which matches HW generated out of AMD Vivado
(design tools). But initial configuration is going beyond what it is
configured by default because validation should be done on other
configurations too. That's why wire also additional uart16500, axi
ethernet(with axi dma).
GPIOs, i2c and qspi is also listed for completeness.
IRQ map is: (addr)
0 - timer (0x41c00000)
1 - uartlite (0x40600000)
2 - i2c (0x40800000)
3 - qspi (0x44a00000)
4 - uart16550 (0x44a10000)
5 - emaclite (0x40e00000)
6 - timer2 (0x41c10000)
7 - axi emac (0x40c00000)
8 - axi dma (0x41e00000)
9 - axi dma
10 - gpio (0x40000000)
11 - gpio2 (0x40010000)
12 - gpio3 (0x40020000)
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241125134739.18189-1-sai.pavan.boddu@amd.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Also add a new page, docs/specs/riscv-aia.rst, where we're documenting
the state of AIA support in QEMU w.r.t the controllers being emulated or
not depending on the AIA and accelerator settings.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove the 'irqchip_split()' restriction in kvm_arch_init() now that
we have support for "-accel kvm,kernel-irqchip=split".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The last step to enable KVM AIA aplic-imsic with irqchip in split mode
is to deal with how MSIs are going to be sent. In our current design we
don't allow an APLIC controller to send MSIs unless it's on m-mode. And
we also do not allow Supervisor MSI address configuration via the
'smsiaddrcfg' and 'smsiaddrcfgh' registers unless it's also a m-mode
APLIC controller.
Add a new RISCVACPLICState attribute called 'kvm_msicfgaddr'. This
attribute represents the base configuration address for MSIs, in our
case the base addr of the IMSIC controller. This attribute is being set
only when running irqchip_split() mode with aia=aplic-imsic.
During riscv_aplic_msi_send() we'll check if the attribute was set to
skip the check for a m-mode APLIC controller and to change the resulting
MSI addr by adding kvm_msicfgaddr right before address_space_stl_le().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current logic to determine if we don't need an emulated APLIC
controller, i.e. KVM will provide for us, is to determine if we're
running KVM, with in-kernel irqchip support, and running
aia=aplic-imsic. This is modelled by riscv_is_kvm_aia_aplic_imsic() and
virt_use_kvm_aia_aplic_imsic().
This won't suffice to support irqchip_split() mode: it will match
exactly the same conditions as the one above, but setting the irqchip to
'split' mode will now require us to emulate an APLIC s-mode controller,
like we're doing with 'aia=aplic'.
Create a new riscv_use_emulated_aplic() helper that will encapsulate
this logic. Replace the uses of "riscv_is_kvm_aia_aplic_imsic()" with
this helper every time we're taking a decision on emulate an APLIC
controller or not. Do the same in virt.c with virt_use_emulated_aplic().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Before adding support to kernel-irqchip=split when using KVM AIA we need
to change how we create the in-kernel AIA device.
In the use case we have so far, i.e. in-kernel irqchip without split
mode, both the s-mode APLIC and IMSIC controllers are provided by the
irqchip. In irqchip_split() mode we'll emulate the s-mode APLIC
controller, which will send MSIs to the in-kernel IMSIC controller. To
do that we need to change kvm_riscv_aia_create() to not create the
in-kernel s-mode APLIC controller.
In the kernel source arch/riscv/kvm/aia_aplic.c, function
kvm_riscv_aia_aplic_init(), we verify that the APLIC controller won't be
instantiated by KVM if we do not set 'nr_sources', which is set via
KVM_DEV_RISCV_AIA_CONFIG_SRCS. For QEMU this means that we should not
set 'aia_irq_num' during kvm_riscv_aia_create() in irqchip_split() mode.
In this same condition, skip KVM_DEV_RISCV_AIA_ADDR_APLIC as well since
it is used to set the base address for the in-kernel APLIC controller.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Similar to the riscv_is_kvm_aia_aplic_imsic() helper from riscv_aplic.c,
the existing virt_use_kvm_aia() is testing for KVM aia=aplic-imsic with
in-kernel irqchip enabled. It is not checking for a generic AIA support.
Rename the helper to virt_use_kvm_aia_aplic_imsic() to reflect what the
helper is doing, and use the existing riscv_is_kvm_aia_aplic_imsic() to
obscure details such as the presence of the in-kernel irqchip.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In create_fdt_sockets() we have the following pattern:
if (kvm_enabled() && virt_use_kvm_aia(s)) {
(... do stuff ...)
} else {
(... do other stuff ...)
}
if (kvm_enabled() && virt_use_kvm_aia(s)) {
(... do more stuff ...)
} else {
(... do more other stuff)
}
Do everything in a single if/else clause to reduce the usage of
virt_use_kvm_aia() helper and to make the code a bit less repetitive.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The helper is_kvm_aia() is checking not only for AIA, but for
aplic-imsic (i.e. "aia=aplic-imsic" in 'virt' RISC-V machine) with an
in-kernel chip present.
Rename it to be a bit clear what the helper is doing since we'll add
more AIA helpers in the next patches.
Make the helper public because the 'virt' machine will use it as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a CPU entry for the Tenstorrent Ascalon CPU, a series of 2 wide to
8 wide RV64 cores. More details can be found at
https://tenstorrent.com/ip/tt-ascalon
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241113110459.1607299-1-antonb@tenstorrent.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a riscv_iommu_reset() helper in the base emulation code that
implements the expected reset behavior as defined by the riscv-iommu
spec.
Devices can then use this helper in their own reset callbacks.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
