A translation that encounters a process table entry that is zero is
something that Linux does to cause certain kernel NULL pointer
dereferences to fault. It is not itself a programming error, so avoid
the guest error log.
Message-ID: <20241219034035.1826173-5-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
From the Freescale PowerPC Architecture Primer:
Alternate time base APU. This APU, implemented on the e500v2, defines
a 64-bit time base counter that differs from the PowerPC defined time
base in that it is not writable and counts at a different, and
typically much higher, frequency. The alternate time base always
counts up, wrapping when the 64-bit count overflows.
This implementation of ATB uses the same frequency as the TB. The
existing spr_read_atbu/l functions are unused without this patch
to wire them into the SPR.
RTEMS uses this SPR on the e6500, though this hasn't been tested.
Message-ID: <20241219034035.1826173-6-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
As per the PAPR, bit 0 of byte 64 in pa-features property
indicates availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Use KVM_CAP_PPC_DAWR1 capability to find
whether kvm supports 2nd DAWR or not. If it's supported, allow user to set
the pa-feature bit in guest DT using cap-dawr1 machine capability.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-ID: <173708681866.1678.11128625982438367069.stgit@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Extend the existing watchpoint facility from TCG DAWR0 emulation
to DAWR1 on POWER10.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-ID: <173708680684.1678.13237334676438770057.stgit@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move helper_attn(), helper_scv() and helper_pminsn() to
tcg-excp_helper.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-15-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
In order to move TCG specific code dependent on powerpc_excp()
in the next commit, expose its prototype in "internal.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-14-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Fix style in do_rfi() before moving the code around.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-13-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move helpers common to system/user emulation to tcg-excp_helper.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-12-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move exception helpers to tcg-excp_helper.c so they are
only built when TCG is selected. Preprocessor guards
are added for some helpers unused when CONFIG_USER_ONLY.
[npiggin: mention USER_ONLY change]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250127102620.39159-10-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduced in commit db789c6cd3 ("ppc: Provide basic
raise_exception_* functions"), raise_exception_ra() has
never been used. Remove as dead code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-9-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Expose powerpc_checkstop() prototype, and move it to
tcg-excp_helper.c, only built when TCG is available.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-8-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250127102620.39159-7-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-6-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Move the TCGCPUOps handlers to a new unit: tcg-excp_helper.c,
only built when TCG is selected.
See in target/ppc/cpu_init.c:
#ifdef CONFIG_TCG
static const TCGCPUOps ppc_tcg_ops = {
...
.do_unaligned_access = ppc_cpu_do_unaligned_access,
.do_transaction_failed = ppc_cpu_do_transaction_failed,
.debug_excp_handler = ppc_cpu_debug_excp_handler,
.debug_check_breakpoint = ppc_cpu_debug_check_breakpoint,
.debug_check_watchpoint = ppc_cpu_debug_check_watchpoint,
};
#endif /* CONFIG_TCG */
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-5-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
We are going to move code calling ppc_ldl_code() out of
excp_helper.c where it is defined. Expose its declaration
for few commits, until eventually making it static again
once everything is moved.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20250127102620.39159-4-philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Register RWMR - Region Weighted Mode Register
for privileged access in Power9 and Power10
It controls what the SPURR register produces.
Specs:
- Power10: https://files.openpower.foundation/s/EgCy7C43p2NSRfR
TCG does not model SMT priority, timing, resource controls
and status so this register has no effect for now.
[npiggin: adjust changelog]
Signed-off-by: dan tan <dantan@linux.ibm.com>
Message-ID: <20250116154226.13376-1-dantan@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Linux power management code accesses these registers for pstate
management. Wire up a very simple implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
After OCC fixes in QEMU pnv model and skiboot (since they have suffered
some bitrot), Linux will start performing PM SPR accesses. This is a
very simple implementation that makes it a bit happier.
Thanks,
Nick
Move has_work() from CPUClass to SysemuCPUOps, simplifying
xtensa_cpu_has_work() by directly using CPU env.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-24-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-23-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-22-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-21-philmd@linaro.org>
Move has_work() from CPUClass to SysemuCPUOps, move
s390_cpu_has_work() to cpu-system.c so it is only build
for system emulation binaries, restrict functions not
used anymore on user emulation in interrupt.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-20-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-19-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-18-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-17-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-16-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-15-philmd@linaro.org>
Move has_work() from CPUClass to SysemuCPUOps and
cpu_mips_hw_interrupts_enabled() to system.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-14-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-13-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-12-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-11-philmd@linaro.org>
Move has_work() from CPUClass to SysemuCPUOps,
restrict x86_cpu_pending_interrupt() to system.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-10-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-9-philmd@linaro.org>
Remove as unreachable code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Brian Cain <brian.cain@oss.qualcomm.com>
Message-Id: <20250125170125.32855-8-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-7-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250125170125.32855-5-philmd@linaro.org>
CpuState caches its CPUClass since commit 6fbdff8706
("cpu: cache CPUClass in CPUState for hot code paths"),
use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250122093028.52416-11-philmd@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20241114011310.3615-19-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241114011310.3615-18-philmd@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241114011310.3615-17-philmd@linaro.org>
Move CPU TLB related methods to "exec/cputlb.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241114011310.3615-16-philmd@linaro.org>
Functions which modify TCG globals must not be marked TCG_CALL_NO_WG,
as that tells the optimizer that TCG global values already loaded in
machine registers are still valid, and so any changes which these
helpers make to the CPU state may be ignored.
The target/rx code chooses to put (among other things) all the PSW
bits and also ACC into globals, so the NO_WG flag on various
functions that touch the PSW or ACC is incorrect and must be removed.
This includes all the floating point helper functions, because
update_fpsw() will update PSW Z and S.
Signed-off-by: Keith Packard <keithp@keithp.com>
[PMM: Clarified commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The documentation says the vector is at 0xffffff80, instead of the
previous value of 0xffffffc0. That value must have been a bug because
the standard vector values (20, 21, 23, 25, 30) were all
past the end of the array.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In debug_helper.c we provide a few dummy versions of
debug registers:
* DBGVCR (AArch32 only): enable bits for vector-catch
debug events
* MDCCINT_EL1: interrupt enable bits for the DCC
debug communications channel
* DBGVCR32_EL2: the AArch64 accessor for the state in
DBGVCR
We implemented these only to stop Linux crashing on startup,
but we chose to implement them as ARM_CP_NOP. This worked
for Linux where it only cares about trying to write to these
registers, but is very confusing behaviour for anything that
wants to read the registers (perhaps for context state switches),
because the destination register will be left with whatever
random value it happened to have before the read.
Model these registers instead as RAZ.
Fixes: 5e8b12ffbb ("target-arm: Implement minimal DBGVCR, OSDLR_EL1, MDCCSR_EL0")
Fixes: 5dbdc4342f ("target-arm: Implement dummy MDCCINT_EL1")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2708
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250228162424.1917269-1-peter.maydell@linaro.org
All the callers of op_addr_rr_post() and op_addr_ri_post() now pass in
zero for the address_offset, so we can remove that argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250227142746.1698904-4-peter.maydell@linaro.org
Our STRD implementation doesn't correctly implement the requirement:
* if the address is 8-aligned the access must be a 64-bit
single-copy atomic access, not two 32-bit accesses
Rewrite the handling of STRD to use a single tcg_gen_qemu_st_i64()
of a value produced by concatenating the two 32 bit source registers.
This allows us to get the atomicity right.
As with the LDRD change, now that we don't update 'addr' in the
course of performing the store we need to adjust the offset
we pass to op_addr_ri_post() and op_addr_rr_post().
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250227142746.1698904-3-peter.maydell@linaro.org
