While qemu-system can set tb-size using -accel tcg,tb-size=n, there
is no similar knob for qemu-user. Add one in a way similar to how
one-insn-per-tb is already handled.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240730215532.1442-1-iii@linux.ibm.com>
TCGCPUOps structure makes more sense in the accelerator context
rather than hardware emulation. Move it under the accel/tcg/ scope.
Mechanical change doing:
$ sed -i -e 's,hw/core/tcg-cpu-ops.h,accel/tcg/cpu-ops.h,g' \
$(git grep -l hw/core/tcg-cpu-ops.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-11-philmd@linaro.org>
SA_RESTORER and the associated sa_restorer field of struct sigaction are
an obsolete feature, not expected to be used by future architectures.
They are also absent on RISC-V, LoongArch, Hexagon and OpenRISC, but
defined due to their use of generic/signal.h. This leads to corrupted
data and out-of-bounds accesses.
Move the definition of TARGET_SA_RESTORER out of generic/signal.h into the
target_signal.h files that need it. Note that m68k has the sa_restorer
field, but does not use it and does not define SA_RESTORER.
Reported-by: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <mvmed060xc9.fsf@suse.de>
When complying with the alignment requested in the ELF and unmapping
the excess reservation, having align_end not aligned to the guest page
causes the unmap to be rejected by the alignment check at
target_munmap and later brk adjustments hit an EEXIST.
Fix by aligning the start of region to be unmapped.
Fixes: c81d1fafa6 ("linux-user: Honor elf alignment when placing images")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1913
Signed-off-by: Fabiano Rosas <farosas@suse.de>
[rth: Align load_end as well.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250213143558.10504-1-farosas@suse.de>
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
=UF0n
-----END PGP SIGNATURE-----
Merge tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
# KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
# 2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
# NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
# 42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
# Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
# 87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
# =UF0n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Feb 2025 08:54:51 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: Add late gdbstub attach test
docs/user: Document the %d placeholder and suspend=n QEMU_GDB features
gdbstub: Allow late attachment
osdep: Introduce qemu_kill_thread()
user: Introduce host_interrupt_signal
user: Introduce user/signal.h
gdbstub: Try unlinking the unix socket before binding
gdbstub: Allow the %d placeholder in the socket path
tests/qtest/migration: Pick smoke tests
tests/qtest/migration: Add --full option
Revert "util/timer: avoid deadlock when shutting down"
tests/qtest: tighten up the checks on clock_step
tests/qtest: rename qtest_send_prefix and roll-up into qtest_send
tests/qtest: simplify qtest_process_inbuf
tests/qtest: don't step clock at start of npcm7xx periodic IRQ test
tests/qtest: don't attempt to clock_step while waiting for virtio ISR
tests/docker: replicate the check-rust-tools-nightly CI job
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow debugging individual processes in multi-process applications by
starting them with export QEMU_GDB=/tmp/qemu-%d.sock,suspend=n.
Currently one would have to attach to every process to ensure the app
makes progress.
In case suspend=n is not specified, the flow remains unchanged. If it
is specified, then accepting the client connection is delegated to a
thread. In the future this machinery may be reused for handling
reconnections and interruptions.
On accepting a connection, the thread schedules gdb_handlesig() on the
first CPU and wakes it up with host_interrupt_signal. Note that the
result of this gdb_handlesig() invocation is handled, as opposed to
many other existing call sites. These other call sites probably need to
be fixed separately.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-7-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-16-alex.bennee@linaro.org>
Attaching to the gdbstub of a running process requires stopping its
threads. For threads that run on a CPU, cpu_exit() is enough, but the
only way to grab attention of a thread that is stuck in a long-running
syscall is to interrupt it with a signal.
Reserve a host realtime signal for this, just like it's already done
for TARGET_SIGABRT on Linux. This may reduce the number of available
guest realtime signals by one, but this is acceptable, since there are
quite a lot of them, and it's unlikely that there are apps that need
them all.
Set signal_pending for the safe_sycall machinery to prevent invoking
the syscall. This is a lie, since we don't queue a guest signal, but
process_pending_signals() can handle the absence of pending signals.
The syscall returns with QEMU_ERESTARTSYS errno, which arranges for
the automatic restart. This is important, because it helps avoiding
disturbing poorly written guests.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-5-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-14-alex.bennee@linaro.org>
gdbstub needs target_to_host_signal(), so move its declaration to a
public header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-13-alex.bennee@linaro.org>
This fixes the following qemu warnings when building debian gupnp package:
Unknown host QEMU_IFLA type: 61
Unknown host QEMU_IFLA type: 58
Unknown host QEMU_IFLA type: 59
Unknown host QEMU_IFLA type: 60
Unknown host QEMU_IFLA type: 32820
QEMU_IFLA type 32820 is actually NLA_NESTED | QEMU_IFLA_PROP_LIST (a nested
entry), which is why rta_type needs to be masked with NLA_TYPE_MASK.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Fixes various warnings in the testsuite while building gupnp:
gssdp-net-DEBUG: Failed to send netlink message: Operation not supported
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (192.168.1.2, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host IP (fe80::01, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Failed to parse HOST header from request: Invalid IPv6 address ?[fe80::01%1]? in URI
gupnp-context-DEBUG: Failed to parse HOST header from request: Invalid IPv6 address ?[fe80::01%eth0]? in URI
gupnp-context-DEBUG: Failed to parse HOST header from request: Could not parse port ?:1? in URI
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Add IP_MULTICAST_IF and share the code with IP_ADD_MEMBERSHIP / IP_DROP_MEMBERSHIP.
Sharing the code makes sense, because the manpage of ip(7) says:
IP_MULTICAST_IF (since Linux 1.2)
Set the local device for a multicast socket. The argument
for setsockopt(2) is an ip_mreqn or (since Linux 3.5)
ip_mreq structure similar to IP_ADD_MEMBERSHIP, or an
in_addr structure. (The kernel determines which structure
is being passed based on the size passed in optlen.) For
getsockopt(2), the argument is an in_addr structure.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Avoid using the same error message for two different code paths
as it complicates determining the one which actually triggered.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Fix this warning:
Unknown host IFA type: 11
While adding IFA_PROTO, convert all IFA_XXX values over to QEMU_IFA_XXX values
to avoid a build failure on Ubuntu 22.04 (kernel v5.18 which does not know
IFA_PROTO yet).
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
This started as a clean-up to properly pass a Error handler to the
gdbserver_start so we could do the right thing for command line and
HMP invocations.
Now that we have cleaned up foreach_device_config_or_exit() in earlier
patches we can further simplify by it by passing &error_fatal instead
of checking the return value. Having a return value is still useful
for HMP though so tweak the return to use a simple bool instead.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-11-alex.bennee@linaro.org>
Add some missing fields which may be parsed by userspace applications.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <Z39B1wzNNpndmOxZ@p100>
TB compile flags, tb_page_addr_t type, tb_cflags() and few
other methods are defined in "exec/translation-block.h".
All these files don't include "exec/translation-block.h" but
include "exec/exec-all.h" which include it. Explicitly include
"exec/translation-block.h" to be able to remove it from
"exec/exec-all.h" later when it won't be necessary. Otherwise
we'd get errors such:
accel/tcg/internal-target.h:59:20: error: a parameter list without types is only allowed in a function definition
59 | void tb_lock_page0(tb_page_addr_t);
| ^
accel/tcg/tb-hash.h:64:23: error: unknown type name 'tb_page_addr_t'
64 | uint32_t tb_hash_func(tb_page_addr_t phys_pc, vaddr pc,
| ^
accel/tcg/tcg-accel-ops.c:62:36: error: use of undeclared identifier 'CF_CLUSTER_SHIFT'
62 | cflags = cpu->cluster_index << CF_CLUSTER_SHIFT;
| ^
accel/tcg/watchpoint.c:102:47: error: use of undeclared identifier 'CF_NOIRQ'
102 | cpu->cflags_next_tb = 1 | CF_NOIRQ | curr_cflags(cpu);
| ^
target/i386/helper.c:536:28: error: use of undeclared identifier 'CF_PCREL'
536 | if (tcg_cflags_has(cs, CF_PCREL)) {
| ^
target/rx/cpu.c:51:21: error: incomplete definition of type 'struct TranslationBlock'
51 | cpu->env.pc = tb->pc;
| ~~^
system/physmem.c:2977:9: error: call to undeclared function 'tb_invalidate_phys_range'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
2977 | tb_invalidate_phys_range(addr, addr + length - 1);
| ^
plugins/api.c:96:12: error: call to undeclared function 'tb_cflags'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
96 | return tb_cflags(tcg_ctx->gen_tb) & CF_MEMI_ONLY;
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-5-philmd@linaro.org>
The TranslationBlock flags are defined in 'exec/translation-block.h'.
tcg_cflags_has/set() use them, it is more logical to declare them in
the same place. Move them there too.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212144430.66224-2-philmd@linaro.org>
Move various declarations related to user emulation
from "exec/exec-all.h" to "user/cpu_loop.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-19-philmd@linaro.org>
Declare cpu_loop() once in "user/cpu_loop.h".
bsd-user gets the G_NORETURN attribute.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-18-philmd@linaro.org>
"linux-user/cpu_loop-common.h" is generic enough to be used by
bsd-user, so rename it as "user/cpu_loop.h".
Mechanical change running:
$ sed -i -e 's,cpu_loop-common.h,user/cpu_loop.h,' \
$(git grep -l cpu_loop-common.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-17-philmd@linaro.org>
Move declarations related to page protection under user
emulation from "exec/cpu-all.h" to "user/page-protection.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-15-philmd@linaro.org>
Move declarations related to page protection under user
emulation from "exec/cpu-all.h" to "user/page-protection.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-14-philmd@linaro.org>
Move declarations related to page protection under user
emulation from "exec/cpu-all.h" to "user/page-protection.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-12-philmd@linaro.org>
Move mmap_lock(), mmap_unlock() declarations and the
WITH_MMAP_LOCK_GUARD() definition to 'exec/page-protection.h'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-5-philmd@linaro.org>
arm_set_mte_tcf0() uses the abi_long type which is defined
in "user/abitypes.h". Include it in order to avoid when
refactoring:
In file included from ../../target/arm/gdbstub64.c:28:
../linux-user/aarch64/mte_user_helper.h:30:42: error: unknown type name ‘abi_long’; did you mean ‘u_long’?
30 | void arm_set_mte_tcf0(CPUArchState *env, abi_long value);
| ^~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-3-philmd@linaro.org>
The values previously used for "HEX_EXCP_*" were the cause code
definitions and not the event numbers. So in this commit, we update
the names to reflect the cause codes. In HEX_EVENT_TRAP0's case, we add
a new "HEX_EVENT_*" with the correct event number.
Reviewed-by: Taylor Simpson <ltaylorsimpson@gmail.com>
Signed-off-by: Brian Cain <brian.cain@oss.qualcomm.com>
Set the default NaN pattern explicitly for the arm target.
This includes setting it for the old linux-user nwfpe emulation.
For nwfpe, our default doesn't match the real kernel, but we
avoid making a behaviour change in this commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241202131347.498124-41-peter.maydell@linaro.org
print_mmap() assumes that mmap() receives arguments via memory if
mmap2() is present. s390x (as opposed to s390) does not fit this
pattern: it does not have mmap2(), but mmap() still receives arguments
via memory.
Fix by sharing the detection logic between syscall.c and strace.c.
Cc: qemu-stable@nongnu.org
Fixes: d971040c2d ("linux-user: Fix strace output for old_mmap")
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20241120212717.246186-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This aligns with strace, and is very useful when tracing multi-threaded
programs. The result is the same in single-threaded programs.
Signed-off-by: J. Neuschäfer <j.neuschaefer@gmx.net>
Message-Id: 20241024-strace-v1-1-56c4161431cd@gmx.net
[rth: Use TaskState.ts_tid via get_task_state()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In be8 mode, instructions are little-endian.
In be32 mode, instructions are big-endian.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2333
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce vdso alignment to minimum page size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce vdso alignment to minimum page size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce vdso alignment to minimum page size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reduce vdso alignment to minimum page size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This field is write-only. Use only the function-local
variable within load_elf_image.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Most binaries don't actually depend on more than page alignment,
but any binary can request it. Not honoring this was a bug.
This became obvious when gdb reported
Failed to read a valid object file image from memory
when examining some vdso which are marked as needing more
than page alignment.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Running qemu-i386 on a system running with SELinux in enforcing mode
(more precisely: s390x trixie container on Fedora 40) fails with:
qemu-i386: tests/tcg/i386-linux-user/sigreturn-sigmask: Unable to find a guest_base to satisfy all guest address mapping requirements
00000000-ffffffff
The reason is that main() determines mmap_min_addr from
/proc/sys/vm/mmap_min_addr, but SELinux additionally defines
CONFIG_LSM_MMAP_MIN_ADDR, which is normally larger: 32K or 64K, but,
in general, can be anything. There is no portable way to query its
value: /boot/config, /proc/config and /proc/config.gz are distro- and
environment-specific.
Once the identity map fails, the magnitude of guest_base does not
matter, so fix by starting the search from 1M or 1G.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2598
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20241023002558.34589-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The commit fd6f7798ac ("linux-user: Use direct syscalls for setuid(),
etc") added direct syscall wrappers for setuid(), setgid(), etc since the
system calls have different semantics than the libc functions.
Add and use the corresponding wrappers for setreuid and setregid which
were missed in that commit.
This fixes the build of the debian package of the uid_wrapper library
(https://cwrap.org/uid_wrapper.html) when running linux-user.
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <Zyo2jMKqq8hG8Pkz@p100>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Some applications want to use low priority realtime signals (e.g.,
SIGRTMAX). Currently QEMU cannot map all target realtime signals to
host realtime signals, and chooses to sacrifice the end of the target
realtime signal range.
Allow users to choose how to map target realtime signals to host
realtime signals using the new -t option, the new QEMU_RTSIG_MAP
environment variable, and the new -Drtsig_map=\"...\" meson flag.
To simplify things, the meson flag is not per-target, because the
intended use case is app-specific qemu-user builds.
The mapping is specified using the "tsig hsig count[,...]" syntax.
Target realtime signals [tsig,tsig+count) are mapped to host realtime
signals [hsig,hsig+count). Care is taken to avoid double and
out-of-range mappings.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241029232211.206766-2-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When debugging qemu-user processes using gdbstub, the following warning
appears every time:
warning: BFD: warning: system-supplied DSO at 0x7f8253cc3000 has a corrupt string table index
The reason is that QEMU does not map the VDSO's section headers. The
VDSO's ELF header's e_shoff points to zeros, which GDB fails to parse.
The difference with the kernel's VDSO is that the latter is mapped as a
blob, ignoring program headers - which also don't cover the section
table. QEMU, on the other hand, loads it as an ELF file.
There appears to be no way to place section headers inside a section,
and, therefore, no way to refer to them from a linker script. Also, ld
hardcodes section headers to be non-loadable, see
_bfd_elf_assign_file_positions_for_non_load(). In theory ld could be
enhanced by implementing an "SHDRS" keyword in addition to the existing
"FILEHDR" and "PHDRS".
There are multiple ways to resolve the issue:
- Copy VDSO as a blob in load_elf_vdso(). This would require creating
specialized loader logic, that duplicates parts of load_elf_image().
- Fix up VDSO's PHDR size in load_elf_vdso(). This would require either
duplicating the parsing logic, or adding an ugly parameter to
load_elf_image().
- Fix up VDSO's PHDR size in gen-vdso. This is the simplest solution,
so do it.
There are two tricky parts:
- Byte-swaps need to be done either on local copies, or in-place and
then reverted in the end. To preserve the existing code structure, do
the former for Sym and Dyn, and the latter for Ehdr, Phdr, and Shdr.
- There must be no .bss, which is already the case - but having an
explicit check is helpful to ensure correctness.
To verify this change, I diffed the on-disk and the loaded VDSOs; the
result does not show anything unusual, except for what seems to be an
existing oversight (which should probably be fixed separately):
│ Symbol table '.dynsym' contains 8 entries:
│ Num: Value Size Type Bind Vis Ndx Name
│ - 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
│ - 6: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.29
│ + 0: 00007f61075bf000 0 NOTYPE LOCAL DEFAULT UND
│ + 6: 00007f61075bf000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.29
Fixes: 2fa536d107 ("linux-user: Add gen-vdso tool")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241023202850.55211-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Set the 2-NaN propagation rule explicitly in the float_status words
we use. We wrap this plus the pre-existing setting of the
tininess-before-rounding flag in a new function
arm_set_default_fp_behaviours() to avoid repetition, since we have a
lot of float_status words at this point.
The situation with FPA11 emulation in linux-user is a little odd, and
arguably "correct" behaviour there would be to exactly match a real
Linux kernel's FPA11 emulation. However FPA11 emulation is
essentially dead at this point and so it seems better to continue
with QEMU's current behaviour and leave a comment describing the
situation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-4-peter.maydell@linaro.org
