This change adds a property 'display_modes' on the graphics device
which permits specifying a list of display modes. (screen resolution
and refresh rate)
The property is an array of a custom type to make the syntax slightly
less awkward to use, for example:
-device '{"driver":"apple-gfx-pci", "display-modes":["1920x1080@60", "3840x2160@60"]}'
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-5-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This change wires up the PCI variant of the paravirtualised
graphics device, mainly useful for x86-64 macOS guests, implemented
by macOS's ParavirtualizedGraphics.framework. It builds on code
shared with the vmapple/mmio variant of the PVG device.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-4-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
MacOS provides a framework (library) that allows any vmm to implement a
paravirtualized 3d graphics passthrough to the host metal stack called
ParavirtualizedGraphics.Framework (PVG). The library abstracts away
almost every aspect of the paravirtualized device model and only provides
and receives callbacks on MMIO access as well as to share memory address
space between the VM and PVG.
This patch implements a QEMU device that drives PVG for the VMApple
variant of it.
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-authored-by: Alexander Graf <graf@amazon.com>
Subsequent changes:
* Cherry-pick/rebase conflict fixes, API use updates.
* Moved from hw/vmapple/ (useful outside that machine type)
* Overhaul of threading model, many thread safety improvements.
* Asynchronous rendering.
* Memory and object lifetime fixes.
* Refactoring to split generic and (vmapple) MMIO variant specific
code.
Implementation wise, most of the complexity lies in the differing threading
models of ParavirtualizedGraphics.framework, which uses libdispatch and
internal locks, versus QEMU, which heavily uses the BQL, especially during
memory-mapped device I/O. Great care has therefore been taken to prevent
deadlocks by never calling into PVG methods while holding the BQL, and
similarly never acquiring the BQL in a callback from PVG. Different strategies
have been used (libdispatch, blocking and non-blocking BHs, RCU, etc.)
depending on the specific requirements at each framework entry and exit point.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-3-phil@philjordan.eu>
[PMD: Re-ordered imported headers, style fixups]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The XHCI device code uses tracing rather than logging on various code
paths that are so far unimplemented. In some cases, these code paths
actually indicate faulty guest software. This patch switches instances
in the read and write handlers for the port MMIO region to use
qemu_log_mask() with LOG_UNIMP or LOG_GUEST_ERROR, as appropriate in
each case.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241227121336.25838-5-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The NEC XHCI controller exposes the underlying PCI device's msi and
msix properties, but the superclass and thus the qemu-xhci device do
not. There does not seem to be any obvious reason for this limitation.
This change moves these properties to the superclass so they are
exposed by both PCI XHCI device variants.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241227121336.25838-3-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The virtio_blk_free_request() function has been a 1-liner forwarding
to g_free() for a while now. We may as well call g_free on the request
pointer directly.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241223221645.29911-14-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Generic code wanting to access KVM specific methods should
do so being protected by the 'kvm_enabled()' helper.
Doing so avoid link failures when optimization is disabled
(using --enable-debug), see for example commits c04cfb4596
("hw/i386: fix short-circuit logic with non-optimizing builds")
and 0266aef8cd ("amd_iommu: Fix kvm_enable_x2apic link error
with clang in non-KVM builds").
XTSup feature depends on KVM, so protect the whole block
checking the XTSup feature with a check on whether KVM is
enabled.
Since x86_cpus_init() already checks APIC ID > 255 imply
kernel support for irqchip and X2APIC, remove the confuse
and unlikely reachable "AMD IOMMU xtsup=on requires support
on the KVM side" message.
Fix a type in "configuration" in error message.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Message-Id: <20241129155802.35534-1-philmd@linaro.org>
Both QEMUResetHandler and FWCfgWriteCallback take an opaque
pointer argument, no need to cast.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241219153857.57450-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241219153857.57450-2-philmd@linaro.org>
On arm/virt platform, Chen Xiang reported a Guest crash while
attempting the below steps,
1. Launch the Guest with nvdimm=on
2. Hot-add a NVDIMM dev
3. Reboot
4. Guest boots fine.
5. Reboot again.
6. Guest boot fails.
QEMU_EFI reports the below error:
ProcessCmdAddPointer: invalid pointer value in "etc/acpi/tables"
OnRootBridgesConnected: InstallAcpiTables: Protocol Error
Debugging shows that on first reboot(after hot adding NVDIMM),
Qemu updates the etc/table-loader len,
qemu_ram_resize()
fw_cfg_modify_file()
fw_cfg_modify_bytes_read()
And in fw_cfg_modify_bytes_read() we set the "callback_opaque" for
the key entry to NULL. Because of this, on the second reboot,
virt_acpi_build_update() is called with a NULL "build_state" and
returns without updating the ACPI tables. This seems to be
upsetting the firmware.
To fix this, don't change the callback_opaque in fw_cfg_modify_bytes_read().
Fixes: bdbb5b1706 ("fw_cfg: add fw_cfg_machine_reset function")
Reported-by: chenxiang <chenxiang66@hisilicon.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-ID: <20241203131806.37548-1-shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
'rxbuf' is the index of the dual port RAM used.
Rename it as 'port_index'.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241112181044.92193-8-philmd@linaro.org>
The current max RX bufsize is set to 0x800. This is
invalid, since it contains the MMIO registers region.
Add the correct definition (valid for both TX & RX,
see datasheet p. 20, Table 11 "XPS Ethernet Lite MAC
Memory Map") and use it.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241112181044.92193-6-philmd@linaro.org>
Use XlnxXpsEthLite typedef, OBJECT_DECLARE_SIMPLE_TYPE macro;
convert type_init() to DEFINE_TYPES().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241112181044.92193-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241112181044.92193-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20241112181044.92193-3-philmd@linaro.org>
These devices are only used by the SPARC targets, which are
only built as big-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_BIG_ENDIAN (besides, the
DEVICE_LITTLE_ENDIAN case isn't tested). Simplify directly
using DEVICE_BIG_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241106184612.71897-6-philmd@linaro.org>
The openrisc little-endian control is in a control register:
SR[LEE] (which we do not implement at present).
These devices are only used by the OpenRISC target, which is
only built as big-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_BIG_ENDIAN (besides, the
DEVICE_LITTLE_ENDIAN case isn't tested). Simplify directly
using DEVICE_BIG_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20241106184612.71897-5-philmd@linaro.org>
These devices are only used by the TriCore target, which is
only built as little-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_LITTLE_ENDIAN (besides, the
DEVICE_BIG_ENDIAN case isn't tested). Simplify directly using
DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20241106184612.71897-3-philmd@linaro.org>
These devices are only used by the X86 targets, which are only
built as little-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_LITTLE_ENDIAN (besides, the
DEVICE_BIG_ENDIAN case isn't tested). Simplify directly using
DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20241106184612.71897-2-philmd@linaro.org>
Pass vCPU endianness as argument so we can load kernels
with different endianness (different from the qemu-system-binary
builtin one).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241107012223.94337-3-philmd@linaro.org>
Introduce defines for UHCI registers to simplify adding register access
in subsequent patches of the series.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240906122542.3808997-3-linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fix reported checkpatch issues to prepare for next patches
in the series.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240906122542.3808997-2-linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Because now there is also an MMIO ivshmem device (ivshmem-flat.c), and
ivshmem.c is a PCI specific implementation, rename it to ivshmem-pci.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-ID: <20241216141818.111255-5-gustavo.romero@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a new device, ivshmem-flat, which is similar to the ivshmem PCI but
does not require a PCI bus. It's meant to be used on machines like those
with Cortex-M MCUs, which usually lack a PCI/PCIe bus, e.g. lm3s6965evb
and mps2-an385.
The device currently only supports the sysbus bus.
The new device, just like the ivshmem PCI device, supports both peer
notification via hardware interrupts and shared memory.
The device shared memory size can be set using the 'shmem-size' option
and it defaults to 4 MiB, which is the default size of shmem allocated
by the ivshmem server.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1134
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
[PMD: Rebased updating Property and using DEFINE_TYPES macro]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241216141818.111255-2-gustavo.romero@linaro.org>
Some boards such as vmapple don't do real legacy PCI IRQ swizzling.
Instead, they just keep allocating more board IRQ lines for each new
legacy IRQ. Let's support that mode by giving instantiators a new
"nr_irqs" property they can use to support more than 4 legacy IRQ lines.
In this mode, GPEX will export more IRQ lines, one for each device.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241223221645.29911-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This series has involved rewriting and/or updating a considerable part of the
next-cube emulation so update the copyright in next-cube.c to reflect this.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-34-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rename them to old_scr2_rtc and scr2_rtc to reflect that they contain the previous
and current values of the SCR2 RTC bits.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-33-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move these functions in next-cube.c so that they are with the rest of the
next-rtc functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-32-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This allows us to decouple the next-pc and next-rtc devices from each
other in next_rtc_data_in_irq().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-31-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This allows us to decouple the next-pc and next-rtc devices from each
other in next_scr2_rtc_update().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-30-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add a named gpio output for the next-rtc data and then update
next_rtc_data_in_irq() to drive the IRQ directly. This enables the next-rtc to
next-pc data to be wired up using the standard qdev gpio APIs.
At the same time rename the pc-rtc-data-in gpio to rtc-data-in which is possible
now that the previous rtc-data-in gpio has been moved to the next-rtc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-29-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add a new rtc-data-out gpio to the next-pc device and wire it up to the next-rtc
rtc-data-in gpio using the standard qdev gpio APIs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-28-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-27-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is to allow the RTC functionality to be maintained within its own separate
device rather than as part of the next-pc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-26-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The rtc phase value of -1 is directly equivalent to using a phase value of 0 so
simplify the logic to use an initial rtc phase of 0.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-25-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is in preparation for moving NeXTRTC to its own separate device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-24-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is in preparation for moving NeXTRTC to its own separate device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-23-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Instead of shifting out rtc read values from individual rtc registers, change
the logic so that rtc read commands are executed when the last bit of the rtc
command is received and the result stored in retval. This simplifies the rtc
read logic such that the shift out logic can be consolidated for rtc phases
between 8 and 16.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-22-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Introduce a new next_rtc_cmd_is_write() function to determine if an rtc command
is a read or write, and start by using it to avoid shifting the rtc input value
if a rtc read command is executed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rather than directly clear bit 3 in int_status in next_scr2_rtc_update(), use
a qemu_irq to drive the equivalent NEXT_PWR_I signal.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This brings the capitalisation in line with the other NeXTCube definitions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the NeXTState, next_dma and TYPE_NEXT_MACHINE definition to the same area
at the top of next-cube.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Now that the next.scr memory region is unused it can be removed and the next-pc
devices mapped directly within the machine init function. This is the last
remaining overlapping memory region within the NeXTCube machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The next.scr memory is now effectively unused, however there are 3 separate region
accesses still logged that occur when booting a NeXTStep disk image. Use the
empty_slot device to capture and ignore memory accesses to these 3 memory regions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the en ethernet MMIO accesses to a separate memory region on the next-pc
device instead of being part of the next.scr MMIO memory region.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the timer MMIO accesses to a separate memory region on the next-pc device
instead of being part of the next.scr MMIO memory region.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Since the ESCC is part of the next-pc device, move the ESCC to be a QOM child
of the next-pc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Since the ESCC device exists within the memory range of the next.scr memory region, map
the ESCC device registers as a subregion of the next.scr memory region instead of
directly to the system address space.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The dummy floppy disk device is part of the next-pc device, and not related to
the NeXTCube SCRs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
