Add definitions (DCx_periph) for the DeviceCapability bits,
replace direct bitmask checks with the DEV_CAP() macro,
which use the extract/deposit API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add definitions for the number of controllers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is nothing mapped at 0x40002000.
I2C#0 is already mapped at 0x40021000.
Remove the invalid mapping added in commits aecfbbc97a & 394c8bbfb7.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Board schematic is useful to corroborate GPIOs/IRQs wiring.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-2-philmd@linaro.org
[PMM: Use https:// URLs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes INTD and MSI interrupts poking the same IRQ line without keeping track of
each other's IRQ level. Furthermore, SoCs such as the i.MX 8M Plus don't share
the MSI IRQ with the INTx lines, so expose it as a dedicated pin.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes characters to be "echoed" after each keystroke rather than after every
other since imx_serial_rx_fifo_ageing_timer_restart() would see ~UTS1_RXEMPTY
only after every other keystroke.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The value of the UCFR register is respected when echoing characters to the
terminal, but its reset value is reserved. Fix the reset value to the one
documented in the datasheet.
While at it move the related attribute out of the section of unimplemented
registers since its value is actually respected.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When instanciating the machine model, the machine_init()
implementations usually create the CPUs, so have access
to its first CPU. Use that rather then the &first_cpu
global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Samuel Tardieu <sam@rfc1149.net>
Message-id: 20250112225614.33723-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the TYPE_ARMV7M object forward its NVIC interrupt lines,
it is somehow misleading to name it 'nvic'. Add the 'armv7m'
local variable for clarity, but also keep the 'nvic' variable
behaving like before when used for wiring IRQ lines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv7MState object is not simply a CPU, it also
contains the NVIC, SysTick timer, and various MemoryRegions.
Rename the field as 'armv7m', like other Cortex-M boards.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-system-s390x currently crashes when trying to inspect older
machines types, for example:
$ echo '{ "execute": "qmp_capabilities" }
{ "execute": "qom-list-properties","arguments":
{ "typename": "s390-ccw-virtio-3.0-machine"}}' \
| ./qemu-system-s390x -qmp stdio -no-shutdown
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 9},
"package": "v9.2.0-1071-g81e97df3e7"}, "capabilities": ["oob"]}}
{"return": {}}
**
Bail out! ERROR:../target/s390x/cpu_models.c:832:s390_set_qemu_cpu_model:
assertion failed: (QTAILQ_EMPTY_RCU(&cpus_queue))
Aborted (core dumped)
The problem is that the versioned s390-ccw-virtio machine types
use instance_init() to set global state that should be initialized
before the CPUs get instantiated. But instance_init() is not called
only for the machine that is finally used, it is also called for
temporary instances of objects that are e.g. just created for
introspection. That means that those instance_init() functions can
also be called while a machine (and its CPUs) is already created,
which triggers the assertion in cpu_models.c.
So we must not use instance_init() for setting global state, but
use the machine->init() function instead, which is really only called
once when the machine comes to life.
Fixes: 3b00f702c2 ("s390x/cpumodel: add zpci, aen and ais facilities")
Message-ID: <20250120085059.239345-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Reduce the overhead for simple RISC-V vector unit-stride loads and stores
* Add V bit to GDB priv reg
* Add 'sha' support
* Add traces for exceptions in user mode
* Update Pointer Masking to Zjpm v1.0
* Add Smrnmi support
* Fix timebase-frequency when using KVM acceleration
* Add RISC-V Counter delegation ISA extension support
* Add support for Smdbltrp and Ssdbltrp extensions
* Introduce a translation tag for the IOMMU page table cache
* Support Supm and Sspm as part of Zjpm v1.0
* Convert htif debug prints to trace event
-----BEGIN PGP SIGNATURE-----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=F3IG
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20250119-1' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 10.0
* Reduce the overhead for simple RISC-V vector unit-stride loads and stores
* Add V bit to GDB priv reg
* Add 'sha' support
* Add traces for exceptions in user mode
* Update Pointer Masking to Zjpm v1.0
* Add Smrnmi support
* Fix timebase-frequency when using KVM acceleration
* Add RISC-V Counter delegation ISA extension support
* Add support for Smdbltrp and Ssdbltrp extensions
* Introduce a translation tag for the IOMMU page table cache
* Support Supm and Sspm as part of Zjpm v1.0
* Convert htif debug prints to trace event
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmeMUUwACgkQr3yVEwxT
# gBNgDQ/+JeqcsbJRX+PZQJEV06tDIJpk+mfaBHUYSGdNkjI9fzowNaxFIEB2vaLt
# 4+xAGMnJ4vMcjJyBcPOn1FKAlowM7MsUNITOF9Rstnyriqnj2UsUZ9YBtkuG6gWH
# ZHoYEKu7mAZoZw5RRx4TatHDXw7TYfUsrDPrn+x6yeCZTq9ruRTlHkzp2LC725Vq
# KTnbWAP7WlqiJaSxB5eIFYT5tYP1Blp0yD358B037C57EU9j5zm2FQdFmVK1+xRF
# dFg/urBIzfAjjkCS/t9DmH+S6NgMEut6udUhllk/KUJAzWvsggc4wZZlWjFOJFJY
# fIxx3alhY3pcm1PYjFpf15Poz6Pqva/KGjwgZafirKQtPbRSzfRkUwcHOYRTQT9j
# abeiB44XPaeIl8Jvw7GLxcWtlJ5NmBrZho+2Z9mIhB/Ix5H3PDgs18Oc/s73P2qQ
# JFLRb7cpYy1HbRc0ugvwAmOTY1t6HX8HAtT+3rNhiXpXnj4RW2C/WU1cEqrg8QkM
# cTPiy2zHoBhAWt9aDK1Kvbhb1vur3JaF7rk9jeKlriFr87Ly+yPU+8mnEDw40NMR
# Tc9nivqmOqqXS5AM9O/W1uzTWzpxIUy7XBy3cuSk0uZCoge4IE2Or7P2Rb2uyaNZ
# RkAo/PL2N1cMjP7gB3kLRtYY7FA+nal66KhfbHPRHqj+ZwUAxzs=
# =F3IG
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 18 Jan 2025 20:11:40 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20250119-1' of https://github.com/alistair23/qemu: (50 commits)
hw/char/riscv_htif: Convert HTIF_DEBUG() to trace events
target/riscv: Support Supm and Sspm as part of Zjpm v1.0
hw/riscv/riscv-iommu.c: Introduce a translation tag for the page table cache
target/riscv: Add Smdbltrp ISA extension enable switch
target/riscv: Implement Smdbltrp behavior
target/riscv: Implement Smdbltrp sret, mret and mnret behavior
target/riscv: Add Smdbltrp CSRs handling
target/riscv: Add Ssdbltrp ISA extension enable switch
target/riscv: Implement Ssdbltrp exception handling
target/riscv: Implement Ssdbltrp sret, mret and mnret behavior
target/riscv: Add Ssdbltrp CSRs handling
target/riscv: Fix henvcfg potentially containing stale bits
target/riscv: Add configuration for S[m|s]csrind, Smcdeleg/Ssccfg
target/riscv: Add implied rule for counter delegation extensions
target/riscv: Invoke pmu init after feature enable
target/riscv: Add counter delegation/configuration support
target/riscv: Add select value range check for counter delegation
target/riscv: Add counter delegation definitions
target/riscv: Add properties for counter delegation ISA extensions
target/riscv: Support generic CSR indirect access
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250116223609.81594-1-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit introduces a translation tag to avoid invalidating an entry
that should not be invalidated when IOMMU executes invalidation commands.
E.g. IOTINVAL.VMA with GV=0, AV=0, PSCV=1 invalidates both a mapping
of single stage translation and a mapping of nested translation with
the same PSCID, but only the former one should be invalidated.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241108110147.11178-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
virt_machine_init() creates the HARTs vCPUs, then later
virt_machine_done() calls create_fdt_sockets(), so the
latter has access to the first vCPU via:
RISCVVirtState {
RISCVHartArrayState {
RISCVCPU *harts;
...
} soc[VIRT_SOCKETS_MAX];
...
} s;
Directly use that instead of the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250112231344.34632-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Keep kvm_riscv_get_timebase_frequency() prototype aligned with
the other ones declared in "kvm_riscv.h", have it take a RISCVCPU
cpu as argument. Include "target/riscv/cpu-qom.h" which declares
the RISCVCPU typedef.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250112231344.34632-2-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because the RNMI interrupt trap handler address is implementation defined.
We add the 'rnmi-interrupt-vector' and 'rnmi-exception-vector' as the property
of the harts. It’s very easy for users to set the address based on their
expectation. This patch also adds the functionality to handle the RNMI signals.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* target/i386: small code generation improvements
* target/i386: various cleanups and fixes
* cpu: remove env->nr_cores
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmeBoIgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOD2gf+NK7U1EhNIrsbBsbtu2i7+tnbRKIB
MTu+Mxb2wz4C7//pxq+vva4bgT3iOuL9RF19PRe/63CMD65xMiwyyNrEWX2HbRIJ
5dytLLLdef3yMhHh2x1uZfm54g12Ppvn9kulMCbPawrlqWgg1sZbkUBrRtFzS45c
NeYjGWWSpBDe7LtsrgSRYLPnz6wWEiy3tDpu2VoDtjrE86UVDXwyzpbtBk9Y8jPi
CKdvLyQeO9xDE5OoXMjJMlJeQq3D9iwYEprXUqy+RUZtpW7YmqMCf2JQ4dAjVCad
07v/kITF4brGCVnzDcDA6W7LqHpBu1w+Hn23yLw3HEDDBt11o9JjQCl9qA==
=xIQ4
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* rust: miscellaneous changes
* target/i386: small code generation improvements
* target/i386: various cleanups and fixes
* cpu: remove env->nr_cores
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmeBoIgUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOD2gf+NK7U1EhNIrsbBsbtu2i7+tnbRKIB
# MTu+Mxb2wz4C7//pxq+vva4bgT3iOuL9RF19PRe/63CMD65xMiwyyNrEWX2HbRIJ
# 5dytLLLdef3yMhHh2x1uZfm54g12Ppvn9kulMCbPawrlqWgg1sZbkUBrRtFzS45c
# NeYjGWWSpBDe7LtsrgSRYLPnz6wWEiy3tDpu2VoDtjrE86UVDXwyzpbtBk9Y8jPi
# CKdvLyQeO9xDE5OoXMjJMlJeQq3D9iwYEprXUqy+RUZtpW7YmqMCf2JQ4dAjVCad
# 07v/kITF4brGCVnzDcDA6W7LqHpBu1w+Hn23yLw3HEDDBt11o9JjQCl9qA==
# =xIQ4
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jan 2025 17:34:48 EST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (38 commits)
i386/cpu: Set and track CPUID_EXT3_CMP_LEG in env->features[FEAT_8000_0001_ECX]
i386/cpu: Set up CPUID_HT in x86_cpu_expand_features() instead of cpu_x86_cpuid()
cpu: Remove nr_cores from struct CPUState
i386/cpu: Hoist check of CPUID_EXT3_TOPOEXT against threads_per_core
i386/cpu: Track a X86CPUTopoInfo directly in CPUX86State
i386/topology: Introduce helpers for various topology info of different level
i386/topology: Update the comment of x86_apicid_from_topo_ids()
i386/cpu: Drop cores_per_pkg in cpu_x86_cpuid()
i386/cpu: Drop the variable smp_cores and smp_threads in x86_cpu_pre_plug()
i386/cpu: Extract a common fucntion to setup value of MSR_CORE_THREAD_COUNT
target/i386/kvm: Replace ARRAY_SIZE(msr_handlers) with KVM_MSR_FILTER_MAX_RANGES
target/i386/kvm: Clean up error handling in kvm_arch_init()
target/i386/kvm: Return -1 when kvm_msr_energy_thread_init() fails
target/i386/kvm: Clean up return values of MSR filter related functions
target/i386/confidential-guest: Fix comment of x86_confidential_guest_kvm_type()
target/i386/kvm: Drop workaround for KVM_X86_DISABLE_EXITS_HTL typo
target/i386/kvm: Only save/load kvmclock MSRs when kvmclock enabled
target/i386/kvm: Remove local MSR_KVM_WALL_CLOCK and MSR_KVM_SYSTEM_TIME definitions
target/i386/kvm: Add feature bit definitions for KVM CPUID
i386/cpu: Mark avx10_version filtered when prefix is NULL
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The RISC-V architecture supports the creation of custom
CSR-mapped devices. It would be convenient to test them in the same way
as MMIO-mapped devices. To do this, a new call has been added
to read/write CSR registers.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
-----BEGIN PGP SIGNATURE-----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=Wz0V
-----END PGP SIGNATURE-----
Merge tag 'pull-xenfv-20250116' of git://git.infradead.org/users/dwmw2/qemu into staging
Xen regression fixes and cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmeIxhcSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVEbKoP/iqQ+PhbwT9+xz6lxW+g1Dx+YGrT/ugp
# d3xHn9AEkR0EHC42J6RB/llyWbKVD/IIhYwUk5GDm+4InGrtuQDhG6UqWxqvIRht
# 0JuZvVm7x5akmKv73igxNqZHVg0ZEAS+EllBUaBYWj0pvpMbBK93Sdz9PXKxA7Nm
# dPeFrOpL2TAmnDCH1UuBbXypHEjAghmv7WFphMtk6qLX+wYVaK3F2J/ed2TNyT0V
# LliOdQH0Pxt445SSVJIZRe9bW3FH7qyvZV1gCnxSnqPUlN7vBhpjzgl4hWEzVYcp
# 7X21ZAD9kPc81DJjYucbLjAbrqSmlDrJqL05qtRigfPcnqz2NoKrYxhj8B0F8mgt
# 1IbymPyeab5gk5Hi1QgMmG5eobDDaglDSxpq6gRfJBiJW+1adif00z/HVvt5onS0
# uQ6i6w5NzQciBX77muAb2ZDEMysjk+3wSJMMpkfl90D0kjlMqeWWs4FH9ThasjC+
# EhQioUD0euedgnzOSfQjNNtAW4gzv9rcShkcV84bjxP/0Es+Pgx9f6wtCUTzdeqy
# Cid8/72lHIgrkZGfpv8BBZkA1XP09vgtUGKyAWm4yHOcB57l8cNiL1nKtqoCLwkQ
# 8JWFWzFeEY19KoiRGY5saH6ExeOx8fmc/lYwqImZqFqvuFX4Vf2RJdTIRIYr7g05
# 2QffxFmskg+A
# =Wz0V
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jan 2025 03:40:55 EST
# gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg: issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544
* tag 'pull-xenfv-20250116' of git://git.infradead.org/users/dwmw2/qemu:
system/runstate: Fix regression, clarify BQL status of exit notifiers
hw/xen: Fix errp handling in xen_console
hw/xen: Use xs_node_read() from xenstore_read_str() instead of open-coding it
hw/xen: Use xs_node_read() from xen_netdev_get_name()
hw/xen: Use xs_node_read() from xen_console_get_name()
hw/xen: Use xs_node_read() from xs_node_vscanf()
xen: do not use '%ms' scanf specifier
hw/xen: Add xs_node_read() helper function
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ4hk/QAKCRAfewwSUazn
0WagAQDgJaWBLQxZkyQR2FQm3WHg3Uf/qolab9nDGo3b2BpixgD/RdvZf+mZpAwf
2ipAQ7g5GqGTKtTAdqO/aBAqTCZCqQU=
=7KKt
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250116' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ4hk/QAKCRAfewwSUazn
# 0WagAQDgJaWBLQxZkyQR2FQm3WHg3Uf/qolab9nDGo3b2BpixgD/RdvZf+mZpAwf
# 2ipAQ7g5GqGTKtTAdqO/aBAqTCZCqQU=
# =7KKt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jan 2025 20:46:37 EST
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250116' of https://gitlab.com/bibo-mao/qemu:
hw/intc/loongarch_ipi: Use alternative implemation for cpu_by_arch_id
hw/intc/loongson_ipi: Add more input parameter for cpu_by_arch_id
hw/intc/loongarch_ipi: Remove property num-cpu
hw/intc/loongarch_ipi: Get cpu number from possible_cpu_arch_ids
hw/intc/loongson_ipi: Remove property num_cpu from loongson_ipi_common
hw/intc/loongson_ipi: Remove num_cpu from loongson_ipi_common
hw/intc/loongarch_ipi: Implement realize interface
target/loongarch: Add page table walker support for debugger usage
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vmclock device addresses the problem of live migration with
precision clocks. The tolerances of a hardware counter (e.g. TSC) are
typically around ±50PPM. A guest will use NTP/PTP/PPS to discipline that
counter against an external source of 'real' time, and track the precise
frequency of the counter as it changes with environmental conditions.
When a guest is live migrated, anything it knows about the frequency of
the underlying counter becomes invalid. It may move from a host where
the counter running at -50PPM of its nominal frequency, to a host where
it runs at +50PPM. There will also be a step change in the value of the
counter, as the correctness of its absolute value at migration is
limited by the accuracy of the source and destination host's time
synchronization.
The device exposes a shared memory region to guests, which can be mapped
all the way to userspace. In the first phase, this merely advertises a
'disruption_marker', which indicates that the guest should throw away any
NTP synchronization it thinks it has, and start again.
Because the region can be exposed all the way to userspace, applications
can still use time from a fast vDSO 'system call', and check the
disruption marker to be sure that their timestamp is indeed truthful.
The structure also allows for the precise time, as known by the host, to
be exposed directly to guests so that they don't have to wait for NTP to
resync from scratch.
The values and fields are based on the nascent virtio-rtc specification,
and the intent is that a version (hopefully precisely this version) of
this structure will be included as an optional part of that spec. In the
meantime, a simple ACPI device along the lines of VMGENID is perfectly
sufficient and is compatible with what's being shipped in certain
commercial hypervisors.
Linux guest support was merged into the 6.13-rc1 kernel:
https://git.kernel.org/torvalds/c/205032724226
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <07fd5e2f529098ad4d7cab1423fe9f4a03a9cc14.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support of VHOST_USER_PROTOCOL_F_DEVICE_STATE in virtio-net
with vhost-user backend.
Cc: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20250115135044.799698-3-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This assertion always happens when we sanitize the CXL memory device.
$ echo 1 > /sys/bus/cxl/devices/mem0/security/sanitize
It is incorrect to register an MSIX number beyond the device's capability.
Increase the device's MSIX number to cover the mailbox msix number(9).
Fixes: 43efb0bfad ("hw/cxl/mbox: Wire up interrupts for background completion")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Message-Id: <20250115075834.167504-1-lizhijian@fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current versions of Windows call _DSM(func=7) regardless
of whether it is supported or not. It leads to NICs having bogus
'PCI Label Id = 0', where none should be set at all.
Also presence of 'PCI Label Id' triggers another Windows bug
on localized versions that leads to hangs. The later bug is fixed
in latest updates for 'Windows Server' but not in consumer
versions of Windows (and there is no plans to fix it
as far as I'm aware).
Given it's easy, implement Microsoft suggested workaround
(return invalid Package) so that affected Windows versions
could boot on QEMU.
This would effectvely remove bogus 'PCI Label Id's on NICs,
but MS teem confirmed that flipping 'PCI Label Id' should not
change 'Network Connection' ennumeration, so it should be safe
for QEMU to change _DSM without any compat code.
Smoke tested with WinXP and WS2022
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/774
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250115125342.3883374-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extending to multiple sources require a BIOS pointer to the
beginning of the HEST table, which in turn requires a backward-compatible
code.
So, the current code supports only one source. Ensure that and simplify
the code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <66bddd42a64c8515ad98b9975d953b4a70ffcc6d.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, CPER address location is calculated as an offset of
the hardware_errors table. It is also badly named, as the
offset actually used is the address where the CPER data starts,
and not the beginning of the error source.
Move the logic which calculates such offset to a separate
function, in preparation for a patch that will be changing the
logic to calculate it from the HEST table.
While here, properly name the variable which stores the cper
address.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <60fdd1bf379ba1db3099710868802aa49a27febb.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The hardware error firmware is where HEST error structures are
stored. Those can be GHESv2, but they can also be other types.
Better name the location of the hardware error.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <ddbb94294bafee998f12fede3ba0b05dae5ee45f.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we have also have a file to store HEST data location,
which is part of GHES, better name the file where CPER records
are stored.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <e79a013bcd9f634b46ff6b34756d1b1403713af3.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make error handling within ghes_record_cper_errors() consistent,
i.e. instead abort just print a error in case ghes GED is not found.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <c7e1665ba46df321f0ce161d60dfd681ab827535.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current function used to generate GHES data is specific for
memory errors. Give a better name for it, as we now have a generic
function as well.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-Id: <35b59121129d5e99cb5062cc3d775594bbb0905b.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split the code into separate functions to allow using the
common CPER filling code by different error sources.
The generic code was moved to ghes_record_cper_errors(),
and ghes_gen_err_data_uncorrectable_recoverable() now contains
only a logic to fill the Generic Error Data part of the record,
as described at:
ACPI 6.2: 18.3.2.7.1 Generic Error Data
The remaining code to generate a memory error now belongs to
acpi_ghes_record_errors() function.
A further patch will give it a better name.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <68d9f787d8c4fc8d1dbc227d6902fe801e42dea9.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'physical_address' value is a faulty page. As such, 0 is
as valid as any other value.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <da32536bf4962e5c03471e2a4e6e0ef92be4a1be.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As described at: ACPI 6.5 spec at:
18.3.2. ACPI Error Source
In particular at GHES/GHESv2 table:
Table 18.10 Generic Hardware Error Source Structure
HEST source ID is actually a 16-bit value.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <0e83ba548c1aedd1299fe387b94db78986590a34.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi_ghes_record_errors() has an assert() at the beginning
to ensure that source_id will be lower than
ACPI_GHES_ERROR_SOURCE_COUNT. Remove a duplicated check.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <df33b004d85b7b9aa388fb2ac530dcdea94b7edc.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GHES has two fields that are stored on HEST error source
blocks associated with notifications:
- notification type, which is a number defined at the ACPI spec
containing several arch-specific synchronous and assynchronous
types;
- source id, which is a HW/FW defined number, used to distinguish
between different implemented sources.
There could be several sources with the same notification type,
which is dependent of the way each architecture maps notifications.
Right now, build_ghes_v2() hardcodes a 1:1 mapping between such
fields. Move it to two independent parameters, allowing the
caller function to fill both.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <133ff72ea1041fed7dbcf97b7a2b0f4dfacde31a.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The GHES driver requires not only a HEST table, but also a
separate firmware file to store Error Structure records.
It can't do one without the other.
Simplify the caller logic for it to require one function.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <9584bb8953385e165681d5d185c503f8df8ef42f.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reduce the ident of the function and prepares it for
the next changes.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <19af4188535217213486d169e0501e592bc78a95.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is just duplicating ACPI_GHES_ERROR_SOURCE_COUNT, which
has a better name. So, drop the duplication.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <9012bf4c9630adf15a22af3c88fda8270916887b.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The end vector calculation has a bug that results in polling fewer
than required vectors when reading at a non-zero offset in PBA memory.
Fixes: bbef882cc1 ("msi: add API to get notified about pending bit poll")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20241212120402.1475053-1-npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This gives user flexibility to turn off FS1GP for debug purpose.
It is also useful for future nesting feature. When host IOMMU doesn't
support FS1GP but vIOMMU does, nested page table on host side works
after turning FS1GP off in vIOMMU.
This property has no effect when vIOMMU is in legacy mode or x-flts=off
in scalable modme.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20241212083757.605022-20-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Intel VT-d 3.0 introduces scalable mode, and it has a bunch of capabilities
related to scalable mode translation, thus there are multiple combinations.
This vIOMMU implementation wants to simplify it with a new property "x-flts".
When turned on in scalable mode, stage-1 translation is supported. When turned
on in legacy mode, throw out error.
With stage-1 translation support exposed to user, also accurate the pasid entry
check in vtd_pe_type_check().
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Message-Id: <20241212083757.605022-19-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VTD spec, stage-1 page table could support 4-level and
5-level paging.
However, 5-level paging translation emulation is unsupported yet.
That means the only supported value for aw_bits is 48. So default
aw_bits to 48 when stage-1 translation is turned on.
For legacy and scalable modes, 48 is the default choice for modern
OS when both 48 and 39 are supported. So it makes sense to set
default to 48 for these two modes too starting from QEMU 9.2.
Use pc_compat_9_1 to handle the compatibility for machines before
9.2.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20241212083757.605022-17-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is used by some emulated devices which caches address
translation result. When piotlb invalidation issued in guest,
those caches should be refreshed.
There is already a similar implementation in iotlb invalidation.
So update vtd_iotlb_page_invalidate_notify() to make it work
also for piotlb invalidation.
For device that does not implement ATS capability or disable
it but still caches the translation result, it is better to
implement ATS cap or enable it if there is need to cache the
translation result.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Message-Id: <20241212083757.605022-15-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20241212083757.605022-14-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be used to implement the device IOTLB invalidation
Signed-off-by: Clément Mathieu--Drif <clement.mathieu--drif@eviden.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20241212083757.605022-13-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PASID-based iotlb (piotlb) is used during walking Intel
VT-d stage-1 page table.
This emulates the stage-1 page table iotlb invalidation requested
by a PASID-based IOTLB Invalidate Descriptor (P_IOTLB).
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20241212083757.605022-12-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to spec, Page-Selective-within-Domain Invalidation (11b):
1. IOTLB entries caching second-stage mappings (PGTT=010b) or pass-through
(PGTT=100b) mappings associated with the specified domain-id and the
input-address range are invalidated.
2. IOTLB entries caching first-stage (PGTT=001b) or nested (PGTT=011b)
mapping associated with specified domain-id are invalidated.
So per spec definition the Page-Selective-within-Domain Invalidation
needs to flush first stage and nested cached IOTLB entries as well.
We don't support nested yet and pass-through mapping is never cached,
so what in iotlb cache are only first-stage and second-stage mappings.
Add a tag pgtt in VTDIOTLBEntry to mark PGTT type of the mapping and
invalidate entries based on PGTT type.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Clément Mathieu--Drif<clement.mathieu--drif@eviden.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Message-Id: <20241212083757.605022-11-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
