According to 'man 2 close' errors returned by close() should only be used
for either diagnostic purposes or for catching data loss due to a previous
write error, as an error result of close() usually indicates a deferred
error of a previous write operation.
Therefore not decrementing 'total_open_fd' on a close() error is wrong
and would yield in a higher open file descriptor count than actually the
case, leading to 9p server reclaiming open file descriptors too soon.
Based-on: <20250312152933.383967-7-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1tvEyJ-004dMa-So@kylie.crudebyte.com>
Add an futimens operation to the fs driver and use if when a fid has
a valid file descriptor. This is required to support more cases where
the client wants to do an action on an unlinked file which it still
has an open file decriptor for.
Only 9P2000.L was considered.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20250312152933.383967-5-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Add an ftruncate operation to the fs driver and use if when a fid has
a valid file descriptor. This is required to support more cases where
the client wants to do an action on an unlinked file which it still
has an open file decriptor for.
Only 9P2000.L was considered.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20250312152933.383967-4-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
v9fs_getattr() currently peeks into V9fsFidOpenState to know if a fid
has a valid file descriptor or directory stream. Even though the fields
are accessible, this is an implementation detail of the local backend
that should not be manipulated directly by the server code.
Abstract that with a new has_valid_file_handle() backend operation.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20250312152933.383967-3-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Factor out duplicated code to a single helper. More users to come.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20250312152933.383967-2-groug@kaod.org>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This patch fixes two different bugs in v9fs_reclaim_fd():
1. Reduce latency:
This function calls v9fs_co_close() and v9fs_co_closedir() in a loop. Each
one of the calls adds two thread hops (between main thread and a fs driver
background thread). Each thread hop adds latency, which sums up in
function's loop to a significant duration.
Reduce overall latency by open coding what v9fs_co_close() and
v9fs_co_closedir() do, executing those and the loop itself altogether in
only one background thread block, hence reducing the total amount of
thread hops to only two.
2. Fix file descriptor leak:
The existing code called v9fs_co_close() and v9fs_co_closedir() to close
file descriptors. Both functions check right at the beginning if the 9p
request was cancelled:
if (v9fs_request_cancelled(pdu)) {
return -EINTR;
}
So if client sent a 'Tflush' message, v9fs_co_close() / v9fs_co_closedir()
returned without having closed the file descriptor and v9fs_reclaim_fd()
subsequently freed the FID without its file descriptor being closed, hence
leaking those file descriptors.
This 2nd bug is fixed by this patch as well by open coding v9fs_co_close()
and v9fs_co_closedir() inside of v9fs_reclaim_fd() and not performing the
v9fs_request_cancelled(pdu) check there.
Fixes: 7a46274529 ('hw/9pfs: Add file descriptor reclaim support')
Fixes: bccacf6c79 ('hw/9pfs: Implement TFLUSH operation')
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5747469d3f039c53147e850b456943a1d4b5485c.1741339452.git.qemu_oss@crudebyte.com>
Even though this function is serialized to be always called from main
thread, v9fs_reclaim_fd() is dispatching the coroutine to a worker thread
in between via its v9fs_co_*() calls, hence leading to the situation where
v9fs_reclaim_fd() is effectively executed multiple times simultaniously,
which renders its LRU algorithm useless and causes high latency.
Fix this by adding a simple boolean variable to ensure this function is
only called once at a time. No synchronization needed for this boolean
variable as this function is only entered and returned on main thread.
Fixes: 7a46274529 ('hw/9pfs: Add file descriptor reclaim support')
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5c622067efd66dd4ee5eca740dcf263f41db20b2.1741339452.git.qemu_oss@crudebyte.com>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Improve tracing of 9p 'Topen' request type by showing open() flags as
human-readable text.
E.g. trace output:
v9fs_open tag 0 id 12 fid 2 mode 100352
would become:
v9fs_open tag=0 id=12 fid=2 mode=100352(RDONLY|NONBLOCK|DIRECTORY|
TMPFILE|NDELAY)
Therefor add a new utility function qemu_open_flags_tostr() that converts
numeric open() flags from host's native O_* flag constants to a string
presentation.
9p2000.L and 9p2000.u protocol variants use different numeric 'mode'
constants for 'Topen' requests. Instead of writing string conversion code
for both protocol variants, use the already existing conversion functions
that convert the mode flags from respective protocol constants to host's
native open() numeric flag constants and pass that result to the new
string conversion function qemu_open_flags_tostr().
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <E1tTgDR-000oRr-9g@kylie.crudebyte.com>
1a6ed33cc5 introduced option multidevs=remap|forbid|warn and made
"warn" the default option.
As it turned out though, e.g. by several reports in conjunction with
following 9p client issue:
850925a813
Many people are just ignoring this warning, or even do not notice the
warning at all. Therefore make multidevs=remap the new default option to
prevent people to run into such kind of severe misbehaviours in the first
place.
From performance PoV the runtime overhead of multidevs=remap is
neglectable with few or even just only one device being shared with the
same 9p export, expected to be constant Theta(1). The inode numbers
emitted to guest also just loose one bit (since 6b6aa8285d) for the 1st
device being shared.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <09cc84e5561f66b6a8cf49b3532c6c78a6acc806.1734876877.git.qemu_oss@crudebyte.com>
'Twalk' is the most important request type in the 9p protocol to look out
for when debugging 9p communication. That's because it is the only part
of the 9p protocol which actually deals with human-readable path names,
whereas all other 9p request types work on numeric file IDs (FIDs) only.
Improve tracing of 'Twalk' requests, e.g. let's say client wanted to walk
to "/home/bob/src", then improve trace output from:
v9fs_walk tag 0 id 110 fid 0 newfid 1 nwnames 3
to:
v9fs_walk tag=0 id=110 fid=0 newfid=1 nwnames=3 wnames={home, bob, src}
To achieve this, add a new helper function trace_v9fs_walk_wnames() which
converts the received V9fsString array of individual path elements into a
comma-separated string presentation for being passed to the tracing system.
As this conversion is somewhat expensive, this conversion function is only
called if tracing of event 'v9fs_walk' is currently enabled.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <E1tJamT-007Cqk-9E@kylie.crudebyte.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The released fix for this CVE:
f6b0de53fb ("9pfs: prevent opening special files (CVE-2023-2861)")
caused a regression with security_model=passthrough. When handling a
'Tmknod' request there was a side effect that 'Tmknod' request could fail
as 9p server was trying to adjust permissions:
#6 close_if_special_file (fd=30) at ../hw/9pfs/9p-util.h:140
#7 openat_file (mode=<optimized out>, flags=2228224,
name=<optimized out>, dirfd=<optimized out>) at
../hw/9pfs/9p-util.h:181
#8 fchmodat_nofollow (dirfd=dirfd@entry=31,
name=name@entry=0x5555577ea6e0 "mysocket", mode=493) at
../hw/9pfs/9p-local.c:360
#9 local_set_cred_passthrough (credp=0x7ffbbc4ace10, name=0x5555577ea6e0
"mysocket", dirfd=31, fs_ctx=0x55555811f528) at
../hw/9pfs/9p-local.c:457
#10 local_mknod (fs_ctx=0x55555811f528, dir_path=<optimized out>,
name=0x5555577ea6e0 "mysocket", credp=0x7ffbbc4ace10) at
../hw/9pfs/9p-local.c:702
#11 v9fs_co_mknod (pdu=pdu@entry=0x555558121140,
fidp=fidp@entry=0x5555574c46c0, name=name@entry=0x7ffbbc4aced0,
uid=1000, gid=1000, dev=<optimized out>, mode=49645,
stbuf=0x7ffbbc4acef0) at ../hw/9pfs/cofs.c:205
#12 v9fs_mknod (opaque=0x555558121140) at ../hw/9pfs/9p.c:3711
That's because server was opening the special file to adjust permissions,
however it was using O_PATH and it would have not returned the file
descriptor to guest. So the call to close_if_special_file() on that branch
was incorrect.
Let's lift the restriction introduced by f6b0de53fb such that it would
allow to open special files on host if O_PATH flag is supplied, not only
for 9p server's own operations as described above, but also for any client
'Topen' request.
It is safe to allow opening special files with O_PATH on host, because
O_PATH only allows path based operations on the resulting file descriptor
and prevents I/O such as read() and write() on that file descriptor.
Fixes: f6b0de53fb ("9pfs: prevent opening special files (CVE-2023-2861)")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2337
Reported-by: Dirk Herrendorfer <d.herrendoerfer@de.ibm.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Dirk Herrendorfer <d.herrendoerfer@de.ibm.com>
Message-Id: <E1tJWbk-007BH4-OB@kylie.crudebyte.com>
With a valid file ID (FID) of an open file, it should be possible to send
a 'Tgettattr' 9p request and successfully receive a 'Rgetattr' response,
even if the file has been removed in the meantime. Currently this would
fail with ENOENT.
I.e. this fixes the following misbehaviour with a 9p Linux client:
open("/home/tst/filename", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
unlink("/home/tst/filename") = 0
fstat(3, 0x23aa1a8) = -1 ENOENT (No such file or directory)
Expected results:
open("/home/tst/filename", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
unlink("/home/tst/filename") = 0
fstat(3, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
This is because 9p server is always using a path name based lstat() call
which fails as soon as the file got removed. So to fix this, use fstat()
whenever we have an open file descriptor already.
Fixes: 00ede4c252 ("virtio-9p: getattr server implementation...")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/103
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4c41ad47f449a5cc8bfa9285743e029080d5f324.1732465720.git.qemu_oss@crudebyte.com>
The comment claims that we'd only support basic Tgetattr fields. This is
no longer true, so remove this comment.
Fixes: e06a765efb ("hw/9pfs: Add st_gen support in getattr reply")
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <fb364d12045217a4c6ccd0dd6368103ddb80698b.1732465720.git.qemu_oss@crudebyte.com>
Drop V9fsFidState's 'next' member, which is no longer used since:
f5265c8f91 ('9pfs: use GHashTable for fid table')
Fixes: f5265c8f91 ('9pfs: use GHashTable for fid table')
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1tE4v2-0051EH-Ni@kylie.crudebyte.com>
A bad (broken or malicious) 9p client (guest) could cause QEMU host to
crash by sending a 9p 'Treaddir' request with a numeric file ID (FID) that
was previously opened for a file instead of an expected directory:
#0 0x0000762aff8f4919 in __GI___rewinddir (dirp=0xf) at
../sysdeps/unix/sysv/linux/rewinddir.c:29
#1 0x0000557b7625fb40 in do_readdir_many (pdu=0x557bb67d2eb0,
fidp=0x557bb67955b0, entries=0x762afe9fff58, offset=0, maxsize=131072,
dostat=<optimized out>) at ../hw/9pfs/codir.c:101
#2 v9fs_co_readdir_many (pdu=pdu@entry=0x557bb67d2eb0,
fidp=fidp@entry=0x557bb67955b0, entries=entries@entry=0x762afe9fff58,
offset=0, maxsize=131072, dostat=false) at ../hw/9pfs/codir.c:226
#3 0x0000557b7625c1f9 in v9fs_do_readdir (pdu=0x557bb67d2eb0,
fidp=0x557bb67955b0, offset=<optimized out>,
max_count=<optimized out>) at ../hw/9pfs/9p.c:2488
#4 v9fs_readdir (opaque=0x557bb67d2eb0) at ../hw/9pfs/9p.c:2602
That's because V9fsFidOpenState was declared as union type. So the
same memory region is used for either an open POSIX file handle (int),
or a POSIX DIR* pointer, etc., so 9p server incorrectly used the
previously opened (valid) POSIX file handle (0xf) as DIR* pointer,
eventually causing a crash in glibc's rewinddir() function.
Root cause was therefore a missing check in 9p server's 'Treaddir'
request handler, which must ensure that the client supplied FID was
really opened as directory stream before trying to access the
aforementioned union and its DIR* member.
Cc: qemu-stable@nongnu.org
Fixes: d62dbb51f7 ("virtio-9p: Add fidtype so that we can do type ...")
Reported-by: Akihiro Suda <suda.kyoto@gmail.com>
Tested-by: Akihiro Suda <suda.kyoto@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1t8GnN-002RS8-E2@kylie.crudebyte.com>
It has been deprecated since 8.1; remove it and suggest using the 'local' file
system backend driver instead or virtiofsd.
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep XenDevOps structures in .rodata.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-5-philmd@linaro.org>
It is okay to register legacy backends in the middle of xen_bus_init().
All that the registration does is record the existence of the backend
in xenstore.
This makes it possible to remove them from the build without introducing
undefined symbols in xen_be_init(). It also removes the need for the
backend_register callback, whose only purpose is to avoid registering
nonfunctional backends.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240509170044.190795-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-21-richard.henderson@linaro.org>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
'bool is_write' style is obsolete from throttle framework, adapt
fsdev to the new style.
Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230728022006.1098509-9-pizhenwei@bytedance.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
As recent CVE-2023-2861 (fixed by f6b0de53fb) once again showed, the 9p
'proxy' fs driver is in bad shape. Using the 'proxy' backend was already
discouraged for safety reasons before and we recommended to use the
'local' backend (preferably in conjunction with its 'mapped' security
model) instead, but now it is time to officially deprecate the 'proxy'
backend.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1qDkmw-0007M1-8f@lizzy.crudebyte.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 9p protocol does not specifically define how server shall behave when
client tries to open a special file, however from security POV it does
make sense for 9p server to prohibit opening any special file on host side
in general. A sane Linux 9p client for instance would never attempt to
open a special file on host side, it would always handle those exclusively
on its guest side. A malicious client however could potentially escape
from the exported 9p tree by creating and opening a device file on host
side.
With QEMU this could only be exploited in the following unsafe setups:
- Running QEMU binary as root AND 9p 'local' fs driver AND 'passthrough'
security model.
or
- Using 9p 'proxy' fs driver (which is running its helper daemon as
root).
These setups were already discouraged for safety reasons before,
however for obvious reasons we are now tightening behaviour on this.
Fixes: CVE-2023-2861
Reported-by: Yanwu Shen <ywsPlz@gmail.com>
Reported-by: Jietao Xiao <shawtao1125@gmail.com>
Reported-by: Jinku Li <jkli@xidian.edu.cn>
Reported-by: Wenbo Shen <shenwenbo@zju.edu.cn>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <E1q6w7r-0000Q0-NM@lizzy.crudebyte.com>
No need to pass zeros as we have helpers that do that for us.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-11-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-10-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
xen_9pfs_free can't use gnttabdev since it is already closed and NULL-ed
out when free is called. Do the teardown in _disconnect(). This
matches the setup done in _connect().
trace-events are also added for the XenDevOps functions.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20230502143722.15613-1-jandryuk@gmail.com>
[C.S.: - Remove redundant return in xen_9pfs_free().
- Add comment to trace-events. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This protects devices from bh->mmio reentrancy issues.
Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-6-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
thread_pool_submit_aio() is always called on a pool taken from
qemu_get_current_aio_context(), and that is the only intended
use: each pool runs only in the same thread that is submitting
work to it, it can't run anywhere else.
Therefore simplify the thread_pool_submit* API and remove the
ThreadPool function parameter.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230203131731.851116-5-eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we have the redirectable Xen backend operations we can build the
PV backends even without the Xen libraries.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This header is now only for native Xen code, not PV backends that may be
used in Xen emulation. Since the toolstack libraries may depend on the
specific version of Xen headers that they pull in (and will set the
__XEN_TOOLS__ macro to enable internal definitions that they depend on),
the rule is that xen_native.h (and thus the toolstack library headers)
must be included *before* any of the headers in include/hw/xen/interface.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The previous commit introduced redirectable gnttab operations fairly
much like-for-like, with the exception of the extra arguments to the
->open() call which were always NULL/0 anyway.
This *changes* the arguments to the ->unmap() operation to include the
original ref# that was mapped. Under real Xen it isn't necessary; all we
need to do from QEMU is munmap(), then the kernel will release the grant,
and Xen does the tracking/refcounting for the guest.
When we have emulated grant tables though, we need to do all that for
ourselves. So let's have the back ends keep track of what they mapped
and pass it in to the ->unmap() method for us.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The existing implementation calling into the real libxenevtchn moves to
a new file hw/xen/xen-operations.c, and is called via a function table
which in a subsequent commit will also be able to invoke the emulated
event channel support.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This commit was created with scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230202133830.2152150-19-armbru@redhat.com>
qemu/coroutine.h and qemu/lockable.h include each other.
They need each other only in macro expansions, so we could simply drop
both inclusions to break the loop, and add suitable includes to files
that expand the macros.
Instead, move a part of qemu/coroutine.h to new qemu/coroutine-core.h
so that qemu/coroutine-core.h doesn't need qemu/lockable.h, and
qemu/lockable.h only needs qemu/coroutine-core.h. Result:
qemu/coroutine.h includes qemu/lockable.h includes
qemu/coroutine-core.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221131435.3851212-5-armbru@redhat.com>
[Semantic rebase conflict with 7c10cb38cc "accel/tcg: Add debuginfo
support" resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221221131435.3851212-2-armbru@redhat.com>
There is a defined RETRY_ON_EINTR() macro in qemu/osdep.h
which handles the same while loop.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/415
Signed-off-by: Nikita Ivanov <nivanov@cloudlinux.com>
Message-Id: <20221023090422.242617-3-nivanov@cloudlinux.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[thuth: Dropped the hunk that changed socket_accept() in libqtest.c]
Signed-off-by: Thomas Huth <thuth@redhat.com>
xxxat() APIs are only available on POSIX platforms. For future
extension to Windows, let's replace the direct call to xxxat()
APIs with a wrapper.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221219102022.2167736-4-bin.meng@windriver.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
These are not used anywhere in the source tree. Drop them.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20221219102022.2167736-3-bin.meng@windriver.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The qemu_v9fs_synth_mkdir() and qemu_v9fs_synth_add_file() functions
currently return a positive errno value on failure. This causes
checkpatch.pl to spit several errors like the one below:
ERROR: return of an errno should typically be -ve (return -EAGAIN)
+ return EAGAIN;
Simply change the sign. This has no consequence since callers
assert() the returned value to be equal to 0.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <166930551818.827792.10663674346122681963.stgit@bahia>
[C.S.: - Resolve conflict with 66997c42e0. ]
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Tweak the semantic patch to drop redundant parenthesis around the
return expression.
Coccinelle drops a comment in hw/rdma/vmw/pvrdma_cmd.c; restored
manually.
Coccinelle messes up vmdk_co_create(), not sure why. Change dropped,
will be done manually in the next commit.
Line breaks in target/avr/cpu.h and hw/rdma/vmw/pvrdma_cmd.c tidied up
manually.
Whitespace in tools/virtiofsd/fuse_lowlevel.c tidied up manually.
checkpatch.pl complains "return of an errno should typically be -ve"
two times for hw/9pfs/9p-synth.c. Preexisting, the patch merely makes
it visible to checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221122134917.1217307-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
