These devices are only used by the X86 targets, which are only
built as little-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_LITTLE_ENDIAN (besides, the
DEVICE_BIG_ENDIAN case isn't tested). Simplify directly using
DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20241106184612.71897-2-philmd@linaro.org>
Pass vCPU endianness as argument so we can load kernels
with different endianness (different from the qemu-system-binary
builtin one).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241107012223.94337-3-philmd@linaro.org>
Introduce defines for UHCI registers to simplify adding register access
in subsequent patches of the series.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240906122542.3808997-3-linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fix reported checkpatch issues to prepare for next patches
in the series.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240906122542.3808997-2-linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Because now there is also an MMIO ivshmem device (ivshmem-flat.c), and
ivshmem.c is a PCI specific implementation, rename it to ivshmem-pci.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-ID: <20241216141818.111255-5-gustavo.romero@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add a new device, ivshmem-flat, which is similar to the ivshmem PCI but
does not require a PCI bus. It's meant to be used on machines like those
with Cortex-M MCUs, which usually lack a PCI/PCIe bus, e.g. lm3s6965evb
and mps2-an385.
The device currently only supports the sysbus bus.
The new device, just like the ivshmem PCI device, supports both peer
notification via hardware interrupts and shared memory.
The device shared memory size can be set using the 'shmem-size' option
and it defaults to 4 MiB, which is the default size of shmem allocated
by the ivshmem server.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1134
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
[PMD: Rebased updating Property and using DEFINE_TYPES macro]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241216141818.111255-2-gustavo.romero@linaro.org>
Some boards such as vmapple don't do real legacy PCI IRQ swizzling.
Instead, they just keep allocating more board IRQ lines for each new
legacy IRQ. Let's support that mode by giving instantiators a new
"nr_irqs" property they can use to support more than 4 legacy IRQ lines.
In this mode, GPEX will export more IRQ lines, one for each device.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241223221645.29911-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This series has involved rewriting and/or updating a considerable part of the
next-cube emulation so update the copyright in next-cube.c to reflect this.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-34-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rename them to old_scr2_rtc and scr2_rtc to reflect that they contain the previous
and current values of the SCR2 RTC bits.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-33-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move these functions in next-cube.c so that they are with the rest of the
next-rtc functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-32-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This allows us to decouple the next-pc and next-rtc devices from each
other in next_rtc_data_in_irq().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-31-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This allows us to decouple the next-pc and next-rtc devices from each
other in next_scr2_rtc_update().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-30-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add a named gpio output for the next-rtc data and then update
next_rtc_data_in_irq() to drive the IRQ directly. This enables the next-rtc to
next-pc data to be wired up using the standard qdev gpio APIs.
At the same time rename the pc-rtc-data-in gpio to rtc-data-in which is possible
now that the previous rtc-data-in gpio has been moved to the next-rtc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-29-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Add a new rtc-data-out gpio to the next-pc device and wire it up to the next-rtc
rtc-data-in gpio using the standard qdev gpio APIs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-28-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-27-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is to allow the RTC functionality to be maintained within its own separate
device rather than as part of the next-pc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-26-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The rtc phase value of -1 is directly equivalent to using a phase value of 0 so
simplify the logic to use an initial rtc phase of 0.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-25-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is in preparation for moving NeXTRTC to its own separate device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-24-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is in preparation for moving NeXTRTC to its own separate device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-23-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Instead of shifting out rtc read values from individual rtc registers, change
the logic so that rtc read commands are executed when the last bit of the rtc
command is received and the result stored in retval. This simplifies the rtc
read logic such that the shift out logic can be consolidated for rtc phases
between 8 and 16.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241222130012.1013374-22-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Introduce a new next_rtc_cmd_is_write() function to determine if an rtc command
is a read or write, and start by using it to avoid shifting the rtc input value
if a rtc read command is executed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-21-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Rather than directly clear bit 3 in int_status in next_scr2_rtc_update(), use
a qemu_irq to drive the equivalent NEXT_PWR_I signal.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-20-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This brings the capitalisation in line with the other NeXTCube definitions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-19-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-18-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the NeXTState, next_dma and TYPE_NEXT_MACHINE definition to the same area
at the top of next-cube.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Now that the next.scr memory region is unused it can be removed and the next-pc
devices mapped directly within the machine init function. This is the last
remaining overlapping memory region within the NeXTCube machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The next.scr memory is now effectively unused, however there are 3 separate region
accesses still logged that occur when booting a NeXTStep disk image. Use the
empty_slot device to capture and ignore memory accesses to these 3 memory regions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the en ethernet MMIO accesses to a separate memory region on the next-pc
device instead of being part of the next.scr MMIO memory region.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the timer MMIO accesses to a separate memory region on the next-pc device
instead of being part of the next.scr MMIO memory region.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Since the ESCC is part of the next-pc device, move the ESCC to be a QOM child
of the next-pc device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Since the ESCC device exists within the memory range of the next.scr memory region, map
the ESCC device registers as a subregion of the next.scr memory region instead of
directly to the system address space.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The dummy floppy disk device is part of the next-pc device, and not related to
the NeXTCube SCRs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The SCSI 4020/4021 logic refers to the offset of the SCSI CSRs within the NeXTCube
address space. Due to the previously overlapping memory regions, there were
duplicate MMIO accessors in the next.scr memory region for these registers but
this has now been resolved.
Move the remaining SCSI 4020/4021 logic from the next-pc device to the next-scsi
device, with the exception that the SCSI 4021 register now returns its previous
value like a normal register instead of a hardcoded 0x40 value. This also matches
how the registers are implemented in the Previous emulator.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The SCSI CSRs are located within the SCSI subsystem of the NeXT PC (Peripheral
Contoller) which is now modelled as a separate QEMU device. Add a new memory
region subregion to contain the SCSI CSRs that simply store and retrieve the
register values.
Add a new VMStateDescription for the next-scsi device to enable the SCSI CSRs
to be migrated.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This device is intended to hold the ESP SCSI controller and the NeXT SCSI CSRs.
Start by creating the device and moving the ESP SCSI controller to be an
embedded child device.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move initialisation of the memory regions and GPIOs from next_pc_realize() to
the new next_pc_init() function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This reflects that the SCSI interface exists within the NeXT Peripheral
Controller (PC).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Move the ESP SCSI and SCSI CSR registers to the new next.scsi container memory
region.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241222130012.1013374-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Change the start of the next.mmio memory region so that it follows on directly
after the next.dma memory region. Increase the address offsets in
next_mmio_read() and next_mmio_write(), and reduce the size of the next.mmio
memory region accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This is a dummy value for the SCSI CSR which appears to have no effect when
removed. Eventually the reads/writes to this register will be directed
towards the WIP implementations in next_scr_readfn() and next_scr_writefn().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20241222130012.1013374-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The NeXT-Cube does not have a CD-ROM drive by default, and the
kernel does not seem to deal with the empty drive very well, so
let's disable the CD-ROM drive for this machine.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241214091720.49779-1-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
These devices are only used by the M68K target, which is only
built as big-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_BIG_ENDIAN (besides, the
DEVICE_LITTLE_ENDIAN case isn't tested). Simplify directly
using DEVICE_BIG_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241106184612.71897-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Trivial fix for the following ticket:
CID 1568580: Incorrect expression (EVALUATION_ORDER)
In "table_size = table_size = n_vectors * 16U",
"table_size" is written twice with the same value.
Cc: qemu-trivial@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Resolves: Coverity CID 1568580
Fixes: 01c1caa9d1 ("hw/riscv/virt.c, riscv-iommu-sys.c: add MSIx support")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
HPETState.capability stores the emulated value for "general capabilities
and id register" instead of "main counter register".
Fix the comment to accurately reflect this.
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For CPU object, possible_cpu_arch_ids() function is used rather than
smp.cpus. With command -smp x, -device la464-loongarch-cpu, smp.cpus
is not accurate for all possible CPU objects, possible_cpu_arch_ids()
is used here.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
The same with ACPI table, fdt table is created on machine done
notification. Some objects like CPU objects can be created with cold-plug
method with command such as -smp x, -device la464-loongarch-cpu, so all
objects finish to create when machine is done.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
vfio_devices_all_dirty_tracking() is used to check if dirty page log
sync is needed. However, besides checking the dirty page tracking
status, it also checks the pre_copy_dirty_page_tracking flag.
Rename it to vfio_devices_log_sync_needed() which reflects its purpose
more accurately and makes the code clearer as there are already several
helpers with similar names.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Tested-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20241218134022.21264-5-avihaih@nvidia.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
During DMA unmap with vIOMMU, vfio_devices_all_running_and_mig_active()
is used to check whether a dirty page log sync of the unmapped pages is
required. Such log sync is needed during migration pre-copy phase, and
the current logic detects it by checking if migration is active and if
the VFIO devices are running.
However, recently there has been an effort to simplify the migration
status API and reduce it to a single migration_is_running() function.
To accommodate this, refactor vfio_devices_all_running_and_mig_active()
logic so it won't use migration_is_active(). Do it by simply checking if
dirty tracking has been started using internal VFIO flags.
This should be equivalent to the previous logic as during migration
dirty tracking is active and when the guest is stopped there shouldn't
be DMA unmaps coming from it.
As a side effect, now that migration status is no longer used, DMA unmap
log syncs are untied from migration. This will make calc-dirty-rate more
accurate as now it will also include VFIO dirty pages that were DMA
unmapped.
Also rename the function to properly reflect its new logic and extract
common code from vfio_devices_all_dirty_tracking().
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Tested-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20241218134022.21264-4-avihaih@nvidia.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
