Live migration should be terminated if the vhost-user backend crashes
before the migration completes.
Specifically, since the vhost device will be stopped when VM is stopped
before the end of the live migration, in current implementation if the
backend crashes, vhost-user device set_status() won't return failure,
live migration won't perceive the disconnection between QEMU and the
backend.
When the VM is migrated to the destination, the inflight IO will be
resubmitted, and if the IO was completed out of order before, it will
cause IO error.
To fix this issue:
1. Add the return value to set_status() for VirtioDeviceClass.
a. For the vhost-user device, return failure when the backend crashes.
b. For other virtio devices, always return 0.
2. Return failure if vhost_dev_stop() failed for vhost-user device.
If QEMU loses connection with the vhost-user backend, virtio set_status()
can return failure to the upper layer, migration_completion() can handle
the error, terminate the live migration, and restore the VM, so that
inflight IO can be completed normally.
Signed-off-by: Haoqian He <haoqian.he@smartx.com>
Message-Id: <20250416024729.3289157-4-haoqian.he@smartx.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This property was added to preserve previous value when this was fixed
in version 2.1 but the last machine using it was already removed when
adding diva-gsp leaving this property unused and unnecessary.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/20250502095524.DE1F355D264@zero.eik.bme.hu
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix a misconfiguration issue in the read implementation of the
AUX_MU_IIR_REG register. This issue can lead to a transmit interrupt
being incorrectly interpreted as a receive interrupt when the receive
interrupt is disabled and the receive FIFO holds valid bytes.
The AUX_MU_IIR_REG register (interrupt ID bits [2:1]) indicates the
status of mini UART interrupts:
- 00: No interrupts
- 01: Transmit FIFO is empty
- 10: Receive FIFO is not empty
- 11: <Not possible>
When the transmit interrupt is enabled and the receive interrupt is
disabled, the original code incorrectly sets the interrupt ID bits.
Specifically:
1. Transmit FIFO empty, receive FIFO empty
- Expected 0b01, returned 0b01 (correct)
2. Transmit FIFO empty, receive FIFO not empty
- Expected 0b01, returned 0b10 (incorrect)
In the second case, the code sets the interrupt ID to 0b10 (receive FIFO
is not empty) even if the receive interrupt is disabled.
To fix this, the patch adds additional condition for setting the
interrupt ID bits to also check if the receive interrupt is enabled.
Reference: BCM2835 ARM Peripherals, page 13. Available on
https://datasheets.raspberrypi.com/bcm2835/bcm2835-peripherals.pdf
Fixes: 97398d900c ("bcm2835_aux: add emulation of BCM2835 AUX (aka UART1) block")
Signed-off-by: Chung-Yi Chen <yeechen0207@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250328123725.94176-1-yeechen0207@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently every board that uses the PL011 duplicates the logic that
selects the Rust implementation if Rust was enabled and the C
implementation if it does not. Factor this out into a separate
Kconfig stanza, so that boards can go back to simply doing "select
PL011" and get whichever implementation is correct for the build.
This fixes a compilation failure if CONFIG_VMAPPLE is enabled
in a Rust build, because hw/vmapple/Kconfig didn't have the
"pick the Rust PL011 if Rust is enabled" logic in it.
Fixes: 59f4d65584 ("hw/vmapple/vmapple: Add vmapple machine type")
Reported-by: Tanish Desai <tanishdesai37@gmail.com>
Analyzed-by: Tanish Desai <tanishdesai37@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20250319193110.1565578-2-peter.maydell@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest does not control whether characters are sent on the UART.
Sending them before the guest happens to boot will now result in a
"guest error" log entry that is only because of timing, even if the
guest _would_ later setup the receiver correctly.
This reverts the bulk of commit abf2b6a028,
and instead adds a comment about why we don't check the enable bits.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20250311153717.206129-1-pbonzini@redhat.com
[PMM: expanded comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We previously allocate the fifo on reset and never free it, which means
we are leaking memory.
Instead let's allocate on realize and free on unrealize.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-ID: <20250303023120.157221-1-alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the IOCanReadHandler sh_serial_can_receive(), if the Serial
Control Register 'Receive Enable' bit is set (bit 4), then we
return a size of (1 << 4) which happens to be equal to 16, so
effectively SH_RX_FIFO_LENGTH.
The IOReadHandler, sh_serial_receive1() takes care to receive
multiple chars, but if the FIFO is partly filled, we only process
the number of free slots in the FIFO, discarding the other chars!
Fix by returning how many elements the FIFO can queue in the
IOCanReadHandler, so we don't have to process more than that in
the IOReadHandler, thus not discarding anything.
Remove the now unnecessary check on 's->rx_cnt < SH_RX_FIFO_LENGTH'
in IOReadHandler, reducing the block indentation.
Fixes: 63242a007a ("SH4: Serial controller improvement")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-10-philmd@linaro.org>
While we model a 4-elements RX FIFO since the MCF UART model
was introduced in commit 20dcee9483 ("MCF5208 emulation"),
we only read 1 char at a time!
Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Tested-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-9-philmd@linaro.org>
Defines FIFO_DEPTH and use it, fixing coding style.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-8-philmd@linaro.org>
While we model a 32-elements RX FIFO since the IMX serial
model was introduced in commit 988f244297 ("hw/char/imx_serial:
Implement receive FIFO and ageing timer") we only read 1 char
at a time!
Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20250220092903.3726-7-philmd@linaro.org>
While we model a 8-elements RX FIFO since the BCM2835 AUX model
was introduced in commit 97398d900c ("bcm2835_aux: add emulation
of BCM2835 AUX block") we only read 1 char at a time!
Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-6-philmd@linaro.org>
While we model a 16-elements RX FIFO since the PL011 model was
introduced in commit cdbdb648b7 ("ARM Versatile Platform Baseboard
emulation"), we only read 1 char at a time!
Have the IOCanReadHandler handler return how many elements are
available, and use that in the IOReadHandler handler.
Example of FIFO better used by enabling the pl011 tracing events
and running the tests/functional/test_aarch64_virt.py tests:
pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
pl011_receive recv 5 chars
pl011_fifo_rx_put RX FIFO push char [0x72] 1/16 depth used
pl011_irq_state irq state 1
pl011_fifo_rx_put RX FIFO push char [0x6f] 2/16 depth used
pl011_fifo_rx_put RX FIFO push char [0x6f] 3/16 depth used
pl011_fifo_rx_put RX FIFO push char [0x74] 4/16 depth used
pl011_fifo_rx_put RX FIFO push char [0x0d] 5/16 depth used
pl011_can_receive LCR 0x70, RX FIFO used 5/16, can_receive 11 chars
pl011_can_receive LCR 0x70, RX FIFO used 5/16, can_receive 11 chars
pl011_write addr 0x038 value 0x00000050 reg IMSC
pl011_irq_state irq state 1
pl011_can_receive LCR 0x70, RX FIFO used 5/16, can_receive 11 chars
pl011_read addr 0x03c value 0x00000030 reg RIS
pl011_write addr 0x044 value 0x00000000 reg ICR
pl011_irq_state irq state 1
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 4/16
pl011_irq_state irq state 1
pl011_read addr 0x000 value 0x00000072 reg DR
pl011_can_receive LCR 0x70, RX FIFO used 4/16, can_receive 12 chars
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 3/16
pl011_irq_state irq state 1
pl011_read addr 0x000 value 0x0000006f reg DR
pl011_can_receive LCR 0x70, RX FIFO used 3/16, can_receive 13 chars
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 2/16
pl011_irq_state irq state 1
pl011_read addr 0x000 value 0x0000006f reg DR
pl011_can_receive LCR 0x70, RX FIFO used 2/16, can_receive 14 chars
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 1/16
pl011_irq_state irq state 1
pl011_read addr 0x000 value 0x00000074 reg DR
pl011_can_receive LCR 0x70, RX FIFO used 1/16, can_receive 15 chars
pl011_read addr 0x018 value 0x00000080 reg FR
pl011_read_fifo RX FIFO read, used 0/16
pl011_irq_state irq state 0
pl011_read addr 0x000 value 0x0000000d reg DR
pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
pl011_read addr 0x018 value 0x00000090 reg FR
pl011_read addr 0x03c value 0x00000020 reg RIS
pl011_write addr 0x038 value 0x00000050 reg IMSC
pl011_irq_state irq state 0
pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
pl011_can_receive LCR 0x70, RX FIFO used 0/16, can_receive 16 chars
pl011_read addr 0x018 value 0x00000090 reg FR
pl011_write addr 0x000 value 0x00000072 reg DR
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-5-philmd@linaro.org>
Log FIFO use (availability and depth).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-4-philmd@linaro.org>
Introduce 'fifo_depth' and 'fifo_available' local variables
to better express the 'r' variable use.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250220092903.3726-3-philmd@linaro.org>
We shouldn't receive characters when the full UART or its
receiver is disabled. However we don't want to break the
possibly incomplete "my first bare metal assembly program"s,
so we choose to simply display a warning when this occurs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc.michel@amd.com>
Message-Id: <20250220092903.3726-2-philmd@linaro.org>
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of
DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN.
Add the "endianness" property to select the device endianness.
This property is unspecified by default, and machines need to
set it explicitly.
Set the proper endianness for each machine using the device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250213122217.62654-6-philmd@linaro.org>
The Diva GSP ("Guardian Service Processor") PCI boards are Remote
Management cards for PA-RISC machines. They come with built-in 16550A
UARTs for serial consoles and modem functionalities, as well as a
mailbox-like memory area for hardware auto-reboot functionality.
Latest generation HP PA-RISC server machines use those Diva cards
for console output.
Signed-off-by: Helge Deller <deller@gmx.de>
There are a fixed number of PCI IRQs, known beforehand.
Allocate them within PCIMultiSerialState, and initialize
using qemu_init_irq(), allowing to remove the legacy
qemu_allocate_irqs() and qemu_free_irqs() calls.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121182828.45088-1-philmd@linaro.org>
No need to dynamically allocate IRQ when we know before hands
how many we'll use. Declare the 2 of them in IPackDevice state
and initialize them in the DeviceRealize handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121155526.29982-4-philmd@linaro.org>
Split IPACK Kconfig key as {IPACK, TPCI200, IP_OCTAL_232}
- IPack is a bus
- TPCI200 is a PCI device providing an IPack bus
- IP-Octal232 is an IPack device plugged on an IPack bus
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20250121155526.29982-3-philmd@linaro.org>
Fixes characters to be "echoed" after each keystroke rather than after every
other since imx_serial_rx_fifo_ageing_timer_restart() would see ~UTS1_RXEMPTY
only after every other keystroke.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The value of the UCFR register is respected when echoing characters to the
terminal, but its reset value is reserved. Fix the reset value to the one
documented in the datasheet.
While at it move the related attribute out of the section of unimplemented
registers since its value is actually respected.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250116223609.81594-1-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When attempting to read the 'output' node, interpret any error *other*
than ENOENT as a fatal error. For ENOENT, fall back to serial_hd() to
find a character device, or create a null device.
Do not attempt to prepend to errp when serial_hd() fails; the error
isn't relevant (and prior to this change, wasn't set anyway).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Now that xs_node_read() can construct a node path, no need to open-code it.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
The 'm' parameter used to request auto-allocation of the destination variable
is not supported on FreeBSD, and as such leads to failures to parse.
What's more, the current usage of '%ms' with xs_node_scanf() is pointless, as
it just leads to a double allocation of the same string. Instead use
xs_node_read() to read the whole xenstore node.
Fixes: a783f8ad4e ('xen: add a mechanism to automatically create XenDevice-s...')
Fixes: 9b77374690 ('hw/xen: update Xen console to XenDevice model')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-ID: <20250111183711.2338-9-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Drop debug printing macros and replace them with according trace
functions.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241220111756.16511-1-nikita.shubin@maquefel.me>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
-----BEGIN PGP SIGNATURE-----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=0iQW
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu into staging
RISC-V PR for 10.0
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmdkzjgACgkQr3yVEwxT
# gBOcyA//e0XhAQciQglCZZCfINdOyI8qSh+P2K0qtrXZ4VERHEMp7UoD5CQr2cZv
# h8ij1EkatXCwukVELx0rNckxG33bEFgG1oESnQSrwGE0Iu4csNW24nK5WlUS0/r+
# A5oD2wtzEF+cbhTKrVSDBN/PvlnWTKGEoJRkuXWfz5d4uR9eyQhfED0S2j36lNEC
# X1x/OZoKM89XuXtOFe9g55Z5UNzAatcdTISozL0FydiPh7QeVjTLHh28/tt559MX
# 7v5aJFlQuZ78z1mIHkZmPSorSrJ0zqhkP6NWe1ae06oMgzwRQQhYLppDILV4ZgUF
# 3mSDRoXmBycQXiYNPcHep3LdXfvxr+PpWHSevx8gH1jwm93On7Y/H7Uol6TDXzfC
# mrFjalfV5tzrD90ZvB+s5bCMF1q5Z8Dlj0pYF9aN9P1ILoWy3dndFAPJB6uKKDP7
# Qd4qOQ3dVyHAX9jLmVkB6QvAV/vTDrYTsAxaF/EaoLOy0IoKhjTvgda3XzE1MFKA
# gVafLluADIfSEdqa2QR2ExL8d1SZVoiObCp5TMLRer0HIpg/vQZwjfdbo4BgQKL3
# 7Q6wBxcZUNqrFgspXjm5WFIrdk2rfS/79OmvpNM6SZaK6BnklntdJHJHtAWujGsm
# EM310AUFpHMp2h6Nqnemb3qr5l4d20KSt8DhoPAUq1IE59Kb8XY=
# =0iQW
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Dec 2024 20:54:00 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu: (39 commits)
target/riscv: add support for RV64 Xiangshan Nanhu CPU
target/riscv: add ssstateen
target/riscv/tcg: hide warn for named feats when disabling via priv_ver
target/riscv: Include missing headers in 'internals.h'
target/riscv: Include missing headers in 'vector_internals.h'
target/riscv: Check svukte is not enabled in RV32
target/riscv: Expose svukte ISA extension
target/riscv: Check memory access to meet svukte rule
target/riscv: Support hstatus[HUKTE] bit when svukte extension is enabled
target/riscv: Support senvcfg[UKTE] bit when svukte extension is enabled
target/riscv: Add svukte extension capability variable
hw/riscv: Add the checking if DTB overlaps to kernel or initrd
hw/riscv: Add a new struct RISCVBootInfo
hw/riscv: Support to load DTB after 3GB memory on 64-bit system.
hw/char/riscv_htif: Clarify MemoryRegionOps expect 32-bit accesses
hw/char/riscv_htif: Explicit little-endian implementation
MAINTAINERS: Cover RISC-V HTIF interface
tests/qtest/bios-tables-test: Update virt SPCR golden reference for RISC-V
hw/acpi: Upgrade ACPI SPCR table to support SPCR table revision 4 format
qtest: allow SPCR acpi table changes
...
Conflicts:
target/riscv/cpu.c
Merge conflict with DEFINE_PROP_END_OF_LIST() removal. No Property
array terminator is needed anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Looking at htif_mm_ops[] read/write handlers, we notice they
expect 32-bit values to accumulate into to the 'fromhost' and
'tohost' 64-bit variables. Explicit by setting the .impl
min/max fields.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241129154304.34946-4-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since our RISC-V system emulation is only built for little
endian, the HTIF device aims to interface with little endian
memory accesses, thus we can explicit htif_mm_ops:endianness
being DEVICE_LITTLE_ENDIAN.
In that case tswap64() is equivalent to le64_to_cpu(), as in
"convert this 64-bit little-endian value into host cpu order".
Replace to simplify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241129154304.34946-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Casting a "uint32_t *" to a "uint8_t *" to get to the lowest 8-bit
part of the value does not work on big endian hosts. We've got to
take the proper detour through an 8-bit variable.
Fixes: 53c1557b23 ("hw/char: sifive_uart: Print uart characters async")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241104163504.305955-1-thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current approach of using qemu_chr_fe_write() and ignoring the
return values results in dropped characters [1].
Let's update the SiFive UART to use a async sifive_uart_xmit() function
to transmit the characters and apply back pressure to the guest with
the SIFIVE_UART_TXFIFO_FULL status.
This should avoid dropped characters and more realisticly model the
hardware.
1: https://gitlab.com/qemu-project/qemu/-/issues/2114
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910045419.1252277-3-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current approach of using qemu_chr_fe_write() and ignoring the
return values results in dropped characters [1]. Ideally we want to
report FIFO status to the guest, but the HTIF isn't a real UART, so we
don't really have a way to do that.
Instead let's just use qemu_chr_fe_write_all() so at least we don't drop
characters.
1: https://gitlab.com/qemu-project/qemu/-/issues/2114
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910045419.1252277-2-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In commit b88cfee902 we defined masks for the IBRD and FBRD
integer and fractional baud rate divider registers, to prevent the
guest from writing invalid values which could cause division-by-zero.
Unfortunately we got the mask values the wrong way around: the FBRD
register is six bits and the IBRD register is 16 bits, not
vice-versa.
You would only run into this bug if you programmed the UART to a baud
rate of less than 9600, because for 9600 baud and above the IBRD
value will fit into 6 bits, as per the table in
https://developer.arm.com/documentation/ddi0183/g/programmers-model/register-descriptions/fractional-baud-rate-register--uartfbrd
The only visible effects would be that the value read back from
the register by the guest would be truncated, and we would
print an incorrect baud rate in the debug logs.
Cc: qemu-stable@nongnu.org
Fixes: b88cfee902 ("hw/char/pl011: Avoid division-by-zero in pl011_get_baudrate()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2610
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20241007144732.2491331-1-peter.maydell@linaro.org
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
=/zo4
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
# Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
# nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
# pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
# DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
# a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
# =/zo4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Oct 2024 21:04:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
qom: update object_resolve_path*() documentation
qom: set *ambiguous on all paths
qom: rename object_resolve_path_type() "ambiguousp"
target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
kvm: Allow kvm_arch_get/put_registers to accept Error**
accel/kvm: refactor dirty ring setup
minikconf: print error entirely on stderr
9p: remove 'proxy' filesystem backend driver
hw/char: Extract serial-mm
hw/char/serial.h: Extract serial-isa.h
hw: Remove unused inclusion of hw/char/serial.h
target/i386: Expose IBPB-BRTYPE and SBPB CPUID bits to the guest
kvm: refactor core virtual machine creation into its own function
kvm/i386: replace identity_base variable with a constant
kvm/i386: refactor kvm_arch_init and split it into smaller functions
kvm: replace fprintf with error_report()/printf() in kvm_init()
kvm/i386: fix return values of is_host_cpu_intel()
kvm/i386: make kvm_filter_msr() and related definitions private to kvm module
hw/i386/pc: Add a description for the i8042 property
tests/unit: remove block layer code from test-nested-aio-poll
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/Kconfig
# hw/arm/pxa2xx.c
hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.
The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:
# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The includes where updated based on compile errors. Now, the inclusion of the
header roughly matches Kconfig dependencies:
# grep -r -e "select SERIAL_ISA"
hw/ppc/Kconfig: select SERIAL_ISA
hw/isa/Kconfig: select SERIAL_ISA
hw/sparc64/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA # for serial_hds_isa_init()
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-3-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
serial_set_frequnecy has been unused since it was added in 2009:
038eaf82c8 ("serial: Add interface to set reference oscillator frequency")
It looks like the 'baudbase' is now a property anyway so the wrapper
isn't needed.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Remove the OMAP2 specific code from omap_uart.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-40-peter.maydell@linaro.org
SW modifying USART_CR1 TE bit should cuase HW to respond by altering
USART_ISR TEACK bit, and likewise for RE and REACK bit.
This resolves some but not all issues necessary for the official STM USART
HAL driver to function as is.
Fixes: 87b77e6e01 ("hw/char/stm32l4x5_usart: Enable serial read and write")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2540
Signed-off-by: Jacob Abrams <satur9nine@gmail.com>
Message-id: 20240911043255.51966-1-satur9nine@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use of assert(false) can trip spurious control flow warnings from
some versions of GCC (i.e. using -fsanitize=thread with gcc-12):
error: control reaches end of non-void function [-Werror=return-type]
default:
assert(0);
| }
| ^
Solve that by unifying the code base on g_assert_not_reached() instead.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240910221606.1817478-5-pierrick.bouvier@linaro.org>
[PMD: Add description suggested by Eric Blake]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
