* Reduce the overhead for simple RISC-V vector unit-stride loads and stores
* Add V bit to GDB priv reg
* Add 'sha' support
* Add traces for exceptions in user mode
* Update Pointer Masking to Zjpm v1.0
* Add Smrnmi support
* Fix timebase-frequency when using KVM acceleration
* Add RISC-V Counter delegation ISA extension support
* Add support for Smdbltrp and Ssdbltrp extensions
* Introduce a translation tag for the IOMMU page table cache
* Support Supm and Sspm as part of Zjpm v1.0
* Convert htif debug prints to trace event
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmeMUUwACgkQr3yVEwxT
gBNgDQ/+JeqcsbJRX+PZQJEV06tDIJpk+mfaBHUYSGdNkjI9fzowNaxFIEB2vaLt
4+xAGMnJ4vMcjJyBcPOn1FKAlowM7MsUNITOF9Rstnyriqnj2UsUZ9YBtkuG6gWH
ZHoYEKu7mAZoZw5RRx4TatHDXw7TYfUsrDPrn+x6yeCZTq9ruRTlHkzp2LC725Vq
KTnbWAP7WlqiJaSxB5eIFYT5tYP1Blp0yD358B037C57EU9j5zm2FQdFmVK1+xRF
dFg/urBIzfAjjkCS/t9DmH+S6NgMEut6udUhllk/KUJAzWvsggc4wZZlWjFOJFJY
fIxx3alhY3pcm1PYjFpf15Poz6Pqva/KGjwgZafirKQtPbRSzfRkUwcHOYRTQT9j
abeiB44XPaeIl8Jvw7GLxcWtlJ5NmBrZho+2Z9mIhB/Ix5H3PDgs18Oc/s73P2qQ
JFLRb7cpYy1HbRc0ugvwAmOTY1t6HX8HAtT+3rNhiXpXnj4RW2C/WU1cEqrg8QkM
cTPiy2zHoBhAWt9aDK1Kvbhb1vur3JaF7rk9jeKlriFr87Ly+yPU+8mnEDw40NMR
Tc9nivqmOqqXS5AM9O/W1uzTWzpxIUy7XBy3cuSk0uZCoge4IE2Or7P2Rb2uyaNZ
RkAo/PL2N1cMjP7gB3kLRtYY7FA+nal66KhfbHPRHqj+ZwUAxzs=
=F3IG
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20250119-1' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 10.0
* Reduce the overhead for simple RISC-V vector unit-stride loads and stores
* Add V bit to GDB priv reg
* Add 'sha' support
* Add traces for exceptions in user mode
* Update Pointer Masking to Zjpm v1.0
* Add Smrnmi support
* Fix timebase-frequency when using KVM acceleration
* Add RISC-V Counter delegation ISA extension support
* Add support for Smdbltrp and Ssdbltrp extensions
* Introduce a translation tag for the IOMMU page table cache
* Support Supm and Sspm as part of Zjpm v1.0
* Convert htif debug prints to trace event
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmeMUUwACgkQr3yVEwxT
# gBNgDQ/+JeqcsbJRX+PZQJEV06tDIJpk+mfaBHUYSGdNkjI9fzowNaxFIEB2vaLt
# 4+xAGMnJ4vMcjJyBcPOn1FKAlowM7MsUNITOF9Rstnyriqnj2UsUZ9YBtkuG6gWH
# ZHoYEKu7mAZoZw5RRx4TatHDXw7TYfUsrDPrn+x6yeCZTq9ruRTlHkzp2LC725Vq
# KTnbWAP7WlqiJaSxB5eIFYT5tYP1Blp0yD358B037C57EU9j5zm2FQdFmVK1+xRF
# dFg/urBIzfAjjkCS/t9DmH+S6NgMEut6udUhllk/KUJAzWvsggc4wZZlWjFOJFJY
# fIxx3alhY3pcm1PYjFpf15Poz6Pqva/KGjwgZafirKQtPbRSzfRkUwcHOYRTQT9j
# abeiB44XPaeIl8Jvw7GLxcWtlJ5NmBrZho+2Z9mIhB/Ix5H3PDgs18Oc/s73P2qQ
# JFLRb7cpYy1HbRc0ugvwAmOTY1t6HX8HAtT+3rNhiXpXnj4RW2C/WU1cEqrg8QkM
# cTPiy2zHoBhAWt9aDK1Kvbhb1vur3JaF7rk9jeKlriFr87Ly+yPU+8mnEDw40NMR
# Tc9nivqmOqqXS5AM9O/W1uzTWzpxIUy7XBy3cuSk0uZCoge4IE2Or7P2Rb2uyaNZ
# RkAo/PL2N1cMjP7gB3kLRtYY7FA+nal66KhfbHPRHqj+ZwUAxzs=
# =F3IG
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 18 Jan 2025 20:11:40 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20250119-1' of https://github.com/alistair23/qemu: (50 commits)
hw/char/riscv_htif: Convert HTIF_DEBUG() to trace events
target/riscv: Support Supm and Sspm as part of Zjpm v1.0
hw/riscv/riscv-iommu.c: Introduce a translation tag for the page table cache
target/riscv: Add Smdbltrp ISA extension enable switch
target/riscv: Implement Smdbltrp behavior
target/riscv: Implement Smdbltrp sret, mret and mnret behavior
target/riscv: Add Smdbltrp CSRs handling
target/riscv: Add Ssdbltrp ISA extension enable switch
target/riscv: Implement Ssdbltrp exception handling
target/riscv: Implement Ssdbltrp sret, mret and mnret behavior
target/riscv: Add Ssdbltrp CSRs handling
target/riscv: Fix henvcfg potentially containing stale bits
target/riscv: Add configuration for S[m|s]csrind, Smcdeleg/Ssccfg
target/riscv: Add implied rule for counter delegation extensions
target/riscv: Invoke pmu init after feature enable
target/riscv: Add counter delegation/configuration support
target/riscv: Add select value range check for counter delegation
target/riscv: Add counter delegation definitions
target/riscv: Add properties for counter delegation ISA extensions
target/riscv: Support generic CSR indirect access
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250116223609.81594-1-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Zjpm v1.0 spec states there should be Supm and Sspm extensions that
are used in profile specification. Enabling Supm extension enables both
Ssnpm and Smnpm, while Sspm enables only Smnpm.
Signed-off-by: Alexey Baturo <baturo.alexey@gmail.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250113194410.1307494-1-baturo.alexey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit introduces a translation tag to avoid invalidating an entry
that should not be invalidated when IOMMU executes invalidation commands.
E.g. IOTINVAL.VMA with GV=0, AV=0, PSCV=1 invalidates both a mapping
of single stage translation and a mapping of nested translation with
the same PSCID, but only the former one should be invalidated.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241108110147.11178-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add the switch to enable the Smdbltrp ISA extension and disable it for
the max cpu. Indeed, OpenSBI when Smdbltrp is present, M-mode double
trap is enabled by default and MSTATUS.MDT needs to be cleared to avoid
taking a double trap. OpenSBI does not currently support it so disable
it for the max cpu to avoid breaking regression tests.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250116131539.2475785-1-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the Smsdbltrp ISA extension is enabled, if a trap happens while
MSTATUS.MDT is already set, it will trigger an abort or an NMI is the
Smrnmi extension is available.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-9-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the Ssdbltrp extension is enabled, SSTATUS.MDT field is cleared
when executing sret if executed in M-mode. When executing mret/mnret,
SSTATUS.MDT is cleared.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-8-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add `ext_smdbltrp`in RISCVCPUConfig and implement MSTATUS.MDT behavior.
Also set MDT to 1 at reset according to the specification.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-7-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add the switch to enable the Ssdbltrp ISA extension.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-6-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the Ssdbltrp ISA extension is enabled, if a trap happens in S-mode
while SSTATUS.SDT isn't cleared, generate a double trap exception to
M-mode.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-5-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the Ssdbltrp extension is enabled, SSTATUS.SDT field is cleared
when executing sret. When executing mret/mnret, SSTATUS.SDT is cleared
when returning to U, VS or VU and VSSTATUS.SDT is cleared when returning
to VU from HS.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-4-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add ext_ssdbltrp in RISCVCPUConfig and implement MSTATUS.SDT,
{H|M}ENVCFG.DTE and modify the availability of MTVAL2 based on the
presence of the Ssdbltrp ISA extension.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-3-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With the current implementation, if we had the following scenario:
- Set bit x in menvcfg
- Set bit x in henvcfg
- Clear bit x in menvcfg
then, the internal variable env->henvcfg would still contain bit x due
to both a wrong menvcfg mask used in write_henvcfg() as well as a
missing update of henvcfg upon menvcfg update.
This can lead to some wrong interpretation of the context. In order to
update henvcfg upon menvcfg writing, call write_henvcfg() after writing
menvcfg. Clearing henvcfg upon writing the new value is also needed in
write_henvcfg() as well as clearing henvcfg upper part when writing it
with write_henvcfgh().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-2-cleger@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add configuration options so that they can be enabled/disabld from
qemu commandline.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-11-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The counter delegation/configuration extensions depend on the following
extensions.
1. Smcdeleg - To enable counter delegation from M to S
2. S[m|s]csrind - To enable indirect access CSRs
Add an implied rule so that these extensions are enabled by default
if the sscfg extension is enabled.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-10-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The dependant ISA features are enabled at the end of cpu_realize
in finalize_features. Thus, PMU init should be invoked after that
only. Move the init invocation to riscv_tcg_cpu_finalize_features.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-9-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Smcdeleg/Ssccfg adds the support for counter delegation via
S*indcsr and Ssccfg.
It also adds a new shadow CSR scountinhibit and menvcfg enable bit (CDE)
to enable this extension and scountovf virtualization.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Co-developed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-8-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds checks in ops performed on xireg and xireg2-xireg6 so that the
counter delegation function will receive a valid xiselect value with the
proper extensions enabled.
Co-developed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-7-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds definitions for counter delegation, including the new
scountinhibit register and the mstateen.CD bit.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-6-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the properties for counter delegation ISA extensions
(Smcdeleg/Ssccfg). Definitions of new registers and and implementation
will come in the next set of patches.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-5-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the indirect access registers required by sscsrind/smcsrind
and the operations on them. Note that xiselect and xireg are used for
both AIA and sxcsrind, and the behavior of accessing them depends on
whether each extension is enabled and the value stored in xiselect.
Co-developed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-4-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the ratified AIA spec v1.0, three stateen bits control AIA CSR
access.
Bit 60 controls the indirect CSRs
Bit 59 controls the most AIA CSR state
Bit 58 controls the IMSIC state such as stopei and vstopei
Enable the corresponding bits in [m|h]stateen and enable corresponding
checks in the CSR accessor functions.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-3-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Since xiselect and xireg also will be of use in sxcsrind, AIA should
have its own separated interface when those CSRs are accessed.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-2-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the properties for sxcsrind. Definitions of new registers and
implementations will come with future patches.
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-1-e83d797ae294@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
virt_machine_init() creates the HARTs vCPUs, then later
virt_machine_done() calls create_fdt_sockets(), so the
latter has access to the first vCPU via:
RISCVVirtState {
RISCVHartArrayState {
RISCVCPU *harts;
...
} soc[VIRT_SOCKETS_MAX];
...
} s;
Directly use that instead of the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250112231344.34632-3-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Keep kvm_riscv_get_timebase_frequency() prototype aligned with
the other ones declared in "kvm_riscv.h", have it take a RISCVCPU
cpu as argument. Include "target/riscv/cpu-qom.h" which declares
the RISCVCPU typedef.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250112231344.34632-2-philmd@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zicfilp extension introduces the MNPELP (bit 9) in mnstatus.
The MNPELP field holds the previous ELP.
When a RNMI trap is delivered, the MNPELP is set to ELP and ELP set
to NO_LP_EXPECTED. Upon a mnret, if the mnstatus.MNPP holds the
value y, then ELP is set to the value of MNPELP if yLPE is 1;
otherwise, it is set to NO_LP_EXPECTED.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-7-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the properties for ISA extension Smrnmi.
Also, when Smrnmi is present, the firmware (e.g., OpenSBI) must set
mnstatus.NMIE to 1 before enabling any interrupts. Otherwise, all
interrupts will be disabled. Since our current OpenSBI does not
support Smrnmi yet, let's disable Smrnmi for the 'max' type CPU for
now. We can re-enable it once OpenSBI includes proper support for it.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-6-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds a new instruction 'mnret'. 'mnret' is an M-mode-only
instruction that uses the values in `mnepc` and `mnstatus` to return to the
program counter, privilege mode, and virtualization mode of the
interrupted context.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-5-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Because the RNMI interrupt trap handler address is implementation defined.
We add the 'rnmi-interrupt-vector' and 'rnmi-exception-vector' as the property
of the harts. It’s very easy for users to set the address based on their
expectation. This patch also adds the functionality to handle the RNMI signals.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Smrnmi extension adds the 'mnscratch', 'mnepc', 'mncause',
'mnstatus' CSRs.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The boolean variable 'ext_smrnmi' is used to determine whether the
Smrnmi extension exists.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Signed-off-by: Tommy Wu <tommy.wu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zjpm extension is finally ratified. And it's much simplier compared to the experimental one.
The newer version doesn't allow to specify custom mask or base for pointer masking.
Instead it allows only certain options for masking top bits.
Signed-off-by: Alexey Baturo <baturo.alexey@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106102346.1100149-2-baturo.alexey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When using system mode we can get the CPU traps being taken via the
'riscv_trap' trace or the "-d int" qemu log. User mode does not a way of
logging/showing exceptions to users.
Add a trace in riscv_raise_exception() to allow qemu-riscv(32/64) users
to check all exceptions being thrown. This is particularly useful to
help identifying insns that are throwing SIGILLs.
As it is today we need to debug their binaries to identify where the
illegal insns are:
$ ~/work/qemu/build/qemu-riscv64 -cpu rv64 ./foo.out
Illegal instruction (core dumped)
After this change users can capture the trace and use EPC to pinpoint
the insn:
$ ~/work/qemu/build/qemu-riscv64 -cpu rv64 -trace riscv_exception ./foo.out
riscv_exception 8 (user_ecall) on epc 0x17cd2
riscv_exception 8 (user_ecall) on epc 0x17cda
riscv_exception 8 (user_ecall) on epc 0x17622
(...)
riscv_exception 2 (illegal_instruction) on epc 0x1053a
Illegal instruction (core dumped)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106173734.412353-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Do a cosmetic change in riscv_raise_exception() to change 'exception'
type from uint32_t to RISCVException, making it a bit clear that the
arg is directly correlated to the RISCVException enum.
As a side effect, change 'excp' type from int to RISCVException in
generate_exception() to guarantee that all callers of
riscv_raise_exception() will use the enum.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250106173734.412353-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'sha' is the augmented hypervisor extension, defined in RVA22 as a set of
the following extensions:
- RVH
- Ssstateen
- Shcounterenw (always present)
- Shvstvala (always present)
- Shtvala (always present)
- Shvstvecd (always present)
- Shvsatpa (always present)
- Shgatpa (always present)
We can claim support for 'sha' by checking if we have RVH and ssstateen.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shgatpa is defined in RVA22 as:
"For each supported virtual memory scheme SvNN supported in satp, the
corresponding hgatp SvNNx4 mode must be supported. The hgatp mode Bare
must also be supported."
Claim support for shgatpa since this is always true for TCG.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shvsatpa is defined in RVA22 as:
"All translation modes supported in satp must be supported in vsatp."
This is always true in TCG so let's claim support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shvstvecd is defined in RVA22 as:
"vstvec.MODE must be capable of holding the value 0 (Direct).
When vstvec.MODE=Direct, vstvec.BASE must be capable of holding any
valid four-byte-aligned address."
This is always true for TCG so let's claim support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shtvala is described in RVA22 as:
"htval must be written with the faulting guest physical address
in all circumstances permitted by the ISA."
This is the case since commit 3067553993, so claim support for shtvala.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shvstvala is defined in RVA22 as:
"vstval must be written in all cases described above for stval."
By "cases describe above" the doc refer to the description of sstvala:
"stval must be written with the faulting virtual address for load,
store, and instruction page-fault, access-fault, and misaligned
exceptions, and for breakpoint exceptions other than those caused by
execution of the EBREAK or C.EBREAK instructions. For
virtual-instruction and illegal-instruction exceptions, stval must be
written with the faulting instruction."
We already have sstvala, and our vstval follows the same rules as stval,
so we can claim to support shvstvala too.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
shcounterenw is defined in RVA22 as:
"For any hpmcounter that is not read-only zero, the corresponding bit in
hcounteren must be writable."
This is always true in TCG so let's claim support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds virtualization mode (V bit) as bit(2) of register `priv`
per RiscV debug spec v1.0.0-rc4. Checked with gdb-multiarch v12.1.
Note that GDB may display `INVALID` tag for `priv` reg when V bit
is set, this doesn't affect actual access to the bit though.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <tencent_1993B55C24DE7979BF34B200F78287002907@qq.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
