Let's do it similar as virtio-balloon-pci. With this change, we can
use virtio-mem-pci on s390x, although plugging will still fail until
properly wired up in the machine.
No need to worry about transitional/non_transitional devices, because they
don't exist for virtio-mem.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250128185705.1609038-2-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Most virtio-pci devices allow MSI-X. Add it to virtio-balloon-pci, but
only enable it in new machine types, so we don't break migration of
existing machine types between different qemu versions.
This copies what was done for virtio-rng-pci in:
9ea02e8f13 ("virtio-rng-pci: Allow setting nvectors, so we can use MSI-X")
bad9c5a516 ("virtio-rng-pci: fix migration compat for vectors")
62bdb88715 ("virtio-rng-pci: fix transitional migration compat for vectors")
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Message-ID: <20250115161425.246348-1-arbab@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Booting an s390x VM in record/replay mode hangs due to a deadlock
between rr_cpu_thread_fn() and s390_machine_reset(). The former needs
the record/replay mutex held by the latter, and the latter waits until
the former completes its run_on_cpu() request.
Fix by temporarily dropping the record/replay mutex, like it's done in
pause_all_vcpus().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20250124112625.23050-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250128001338.11474-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Node.js crashes in qemu-system-s390x with random SIGSEGVs / SIGILLs.
The v8 JIT used by Node.js can garbage collect and overwrite unused
code. Overwriting is performed by WritableJitAllocation::CopyCode(),
which ultimately calls memcpy(). For certain sizes, memcpy() uses the
MVC instruction.
QEMU implements MVC and other similar instructions using helpers. While
TCG store ops invalidate affected translation blocks automatically,
helpers must do this manually by calling probe_access_flags(). The MVC
helper does this using the access_prepare() -> access_prepare_nf() ->
s390_probe_access() -> probe_access_flags() call chain.
At the last step of this chain, the store size is replaced with 0. This
causes the probe_access_flags() -> notdirty_write() ->
tb_invalidate_phys_range_fast() chain to miss some translation blocks.
When this happens, QEMU executes a mix of old and new code. This
quickly leads to either a SIGSEGV or a SIGILL in case the old code
ends in the middle of a new instruction.
Fix by passing the true size.
Reported-by: Berthold Gunreben <azouhr@opensuse.org>
Cc: Sarah Kriesch <ada.lovelace@gmx.de>
Cc: qemu-stable@nongnu.org
Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1235709
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Fixes: e2faabee78 ("accel/tcg: Forward probe size on to notdirty_write")
Message-ID: <20250128001338.11474-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Executing PERFORM RANDOM NUMBER OPERATION makes QEMU exit with "Bad
icount read" when using record/replay. This is caused by
icount_get_raw_locked() if the current instruction is not the last one
in the respective translation block.
For the x86_64's rdrand this is resolved by calling
translator_io_start(). On s390x one uses IF_IO in order to make this
call happen automatically.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250123123808.194405-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test is for the big endian MIPS target, not for the little endian
target.
Fixes: 79cb4a14cb ("tests/functional: Convert mips32eb 4Kc Malta tests")
Message-ID: <20250127184112.108122-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test sequence boots from disk a mac99 machine in 64-bit mode, in
which case the CPU is a PPC 970.
The buildroot rootfs is built with config :
BR2_powerpc64=y
BR2_powerpc_970=y
and the kernel with the g5 deconfig.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20250128212145.1186617-1-clg@redhat.com>
[thuth: Adjusted the comment about '-nographic]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Unfortunately, this test had not been added to meson.build, so we did
not notice a regression: Looking for 'Kernel panic - not syncing: VFS:'
as the indication for the final boot state of the kernel was a bad
idea since 'Kernel panic - not syncing' is the default failure
message of the LinuxKernelTest class, and since we're now reading
the console input byte by byte instead of linewise (see commit
cdad03b74f), the failure now triggers before we fully read the
success string. Let's fix this by simply looking for the previous
line in the console output instead.
Also, replace the call to cancel() - this was only available in the
Avocado framework. In the functional framework, we must use skipTest()
instead. While we're at it, also fix the TODO here by looking for the
exact error and only skip the test if the plugins are not available.
Fixes: 3abc545e66 ("tests/functional: Convert the tcg_plugins test")
Fixes: cdad03b74f ("tests/functional: rewrite console handling to be bytewise")
Message-ID: <20250123083625.1498495-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we've got a find_free_port() function in the functional
test framework, we can convert the migration test, too.
While the original avocado test was only meant to run on aarch64,
ppc64 and x86, we can turn this into a more generic test by now
and run it on all architectures that have a machine which ships
with a working firmware. To avoid overlapping with the migration
qtest, we now also test migration on machines that are not covered
by the migration qtest yet.
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20250103074308.463860-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The decorators that use a lambda function are currently broken
and do not properly skip the test if the condition is not met.
Using "return skipUnless(lambda: ...)" does not work as expected.
To fix it, rewrite the decorators without lambda, it's simpler
that way anyway.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250122134315.1448794-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
skipIfMissingImports should use importlib.import_module() for checking
whether a module with the name stored in the "impname" variable is
available or not, otherwise the code tries to import a module with
the name "impname" instead.
(This bug hasn't been noticed before since there is another issue
with this decorator that will be fixed by the next patch)
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250122134315.1448794-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
-----BEGIN PGP SIGNATURE-----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=H4p7
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmeZOi0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3sUeEACwDhM4ldn/gVZgVN7nf42a
# /CLD/qJx1vqi5bAB5zkY1bSCR9hS2IkhTBoQQH9Ng6ztG1IRpT/tKXDJAemWty70
# XgExdl4yjdwXMQK4JKU9qSfaBTuX7Z8Hz+nA1AnblO/4H+XpVNVJzp8Ee/uWTyEd
# BKPBpwqbIXNwUWEqkzDok074Q05rHlhsJD2DsoJTcmtpROhLHLATwQDZGGFuf56H
# LVcdx6GRP+/mWEGWLtj19mvaR/2cn4rQf+I1MACZ81nRjQCHbCohNAMr2wFsKg1+
# 2jYk9uHdFoambJ5+mFuC55Efk+QJaP4vDR0Gf3jLloFr+rS/5h3HiUuD8dUWOwFd
# mPWXsjwYzqBW2knt1nfq1ByzYWZ8rVQEn5G53dX/eoNXuDGsonZxPnevgmv5kIUc
# /W618Jez1nu9RDtNKccobHEtTGlGInJxJ7YzkU7Q6FO80IAqSdV7t9v7uPLJwcnz
# nQz+wVzb4oOmwMzn3BpKY7N/S7IZOSy3ASNHj8o4yCHMJT8Ki0/N4bl0k0DLxJ0T
# RiNCsV9c7MJfo9a+pbOnu0Lc3SjjropdvHYU+bB7R0mgd8ysN+Tou0dpa+i7tUTu
# DHWqs2/+UApHKBiC+DSynPjjRR2aT/5lYFncGaiEVoEQttPLka3SAzgHPVQZs1zD
# bxZkEAFktAFGIjU70fYNkg==
# =H4p7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 Jan 2025 15:12:29 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits)
hw/usb/canokey: Fix buffer overflow for OUT packet
target/arm: Use FPST_A64_F16 for halfprec-to-other conversions
target/arm: Remove redundant advsimd float16 helpers
fpu: Fix a comment in softfloat-types.h
fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
target/arm: Remove now-unused vfp.fp_status_f16 and FPST_FPCR_F16
target/arm: Use FPST_A64_F16 in A64 decoder
target/arm: Use FPST_A32_F16 in A32 decoder
target/arm: Use fp_status_f16_a64 in AArch64-only helpers
target/arm: Use fp_status_f16_a32 in AArch32-only helpers
target/arm: Define new fp_status_f16_a32 and fp_status_f16_a64
target/arm: Remove now-unused vfp.fp_status and FPST_FPCR
target/arm: Use FPST_A64 in A64 decoder
target/arm: Use FPST_A32 in A32 decoder
target/arm: Use fp_status_a32 in vfp_cmp helpers
target/arm: Use fp_status_a32 in vjvct helper
target/arm: Use fp_status_a64 or fp_status_a32 in is_ebf()
target/arm: Use vfp.fp_status_a64 in A64-only helper functions
target/arm: Define new fp_status_a32 and fp_status_a64
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When USBPacket in OUT direction has larger payload
than the ep_out_buffer (of size 512), a buffer overflow
would occur.
It could be fixed by limiting the size of usb_packet_copy
to be at most buffer size. Further optimization gets rid
of the ep_out_buffer and directly uses ep_out as the target
buffer.
This is reported by a security researcher who artificially
constructed an OUT packet of size 2047. The report has gone
through the QEMU security process, and as this device is for
testing purpose and no deployment of it in virtualization
environment is observed, it is triaged not to be a security bug.
Cc: qemu-stable@nongnu.org
Fixes: d7d3491855 ("hw/usb: Add CanoKey Implementation")
Reported-by: Juan Jose Lopez Jaimez <thatjiaozi@gmail.com>
Signed-off-by: Hongren Zheng <i@zenithal.me>
Message-id: Z4TfMOrZz6IQYl_h@Sun
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should be using the F16-specific float_status for conversions from
half-precision, because halfprec inputs never set Input Denormal.
Without FEAT_AHP, using the wrong fpst here had no effect, because
the only difference between the A64_F16 and A64 fpst is its handling
of flush-to-zero on input and output, and the helper functions
vfp_fcvt_f16_to_* and vfp_fcvt_*_to_f16 all explicitly squash the
relevant flushing flags, and flush_inputs_to_zero was the only way
that IDC could be set.
With FEAT_AHP, the FPCR.AH=1 behaviour sets IDC for
input_denormal_used, which we will only ignore in
vfp_get_fpsr_from_host() for the A64_F16 fpst; so it matters that we
use that one for f16 inputs (and the normal one for single/double to
f16 conversions).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-27-peter.maydell@linaro.org
The advsimd_addh etc helpers defined in helper-a64.c are identical to
the vfp_addh etc helpers defined in helper-vfp.c: both take two
float16 inputs (in a uint32_t type) plus a float_status* and are
simple wrappers around the softfloat float16_* functions.
(The duplication seems to be a historical accident: we added the
advsimd helpers in 2018 as part of the A64 implementation, and at
that time there was no f16 emulation in A32. Then later we added the
A32 f16 handling by extending the existing VFP helper macros to
generate f16 versions as well as f32 and f64, and didn't realise we
could clean things up.)
Remove the now-unnecessary advsimd helpers and make the places that
generated calls to them use the vfp helpers instead. Many of the
helper functions were already unused.
(The remaining advsimd_ helpers are those which don't have vfp
versions.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-26-peter.maydell@linaro.org
In softfloat-types.h a comment documents that if the float_status
field flush_to_zero is set then we flush denormalised results to 0
and set the inexact flag. This isn't correct: the status flag that
we set when flush_to_zero causes us to flush an output to zero is
float_flag_output_denormal_flushed.
Correct the comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-22-peter.maydell@linaro.org
Our float_flag_output_denormal exception flag is set when
the fpu code flushes an output denormal to zero. Rename
it to float_flag_output_denormal_flushed:
* this keeps it parallel with the flag for flushing
input denormals, which we just renamed
* it makes it clearer that it doesn't mean "set when
the output is a denormal"
Commit created with
for f in `git grep -l float_flag_output_denormal`; do sed -i -e 's/float_flag_output_denormal/float_flag_output_denormal_flushed/' $f; done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-21-peter.maydell@linaro.org
Our float_flag_input_denormal exception flag is set when the fpu code
flushes an input denormal to zero. This is what many guest
architectures (eg classic Arm behaviour) require, but it is not the
only donarmal-related reason we might want to set an exception flag.
The x86 behaviour (which we do not currently model correctly) wants
to see an exception flag when a denormal input is *not* flushed to
zero and is actually used in an arithmetic operation. Arm's FEAT_AFP
also wants these semantics.
Rename float_flag_input_denormal to float_flag_input_denormal_flushed
to make it clearer when it is set and to allow us to add a new
float_flag_input_denormal_used next to it for the x86/FEAT_AFP
semantics.
Commit created with
for f in `git grep -l float_flag_input_denormal`; do sed -i -e 's/float_flag_input_denormal/float_flag_input_denormal_flushed/' $f; done
and manual editing of softfloat-types.h and softfloat.c to clean
up the indentation afterwards and to fix a comment which wasn't
using the full name of the flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-20-peter.maydell@linaro.org
Now we have moved all the uses of vfp.fp_status_f16 and FPST_FPCR_F16
to the new A32 or A64 fields, we can remove these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-19-peter.maydell@linaro.org
In the A32 decoder, use FPST_A64_F16 rather than FPST_FPCR_F16.
By doing an automated conversion of the whole file we avoid possibly
using more than one fpst value in a set_rmode/op/restore_rmode
sequence.
Patch created with
perl -p -i -e 's/FPST_FPCR_F16(?!_)/FPST_A64_F16/g' target/arm/tcg/translate-{a64,sve,sme}.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-18-peter.maydell@linaro.org
In the A32 decoder, use FPST_A32_F16 rather than FPST_FPCR_F16.
By doing an automated conversion of the whole file we avoid possibly
using more than one fpst value in a set_rmode/op/restore_rmode
sequence.
Patch created with
perl -p -i -e 's/FPST_FPCR_F16(?!_)/FPST_A32_F16/g' target/arm/tcg/translate-vfp.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-17-peter.maydell@linaro.org
We directly use fp_status_f16 in a handful of helpers that are
AArch64-specific; switch to fp_status_f16_a64 for these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-16-peter.maydell@linaro.org
We directly use fp_status_f16 in a handful of helpers that
are AArch32-specific; switch to fp_status_f16_a32 for these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-15-peter.maydell@linaro.org
As the first part of splitting the existing fp_status_f16
into separate float_status fields for AArch32 and AArch64
(so that we can make FEAT_AFP control bits apply only
for AArch64), define the two new fp_status_f16_a32 and
fp_status_f16_a64 fields, but don't use them yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-14-peter.maydell@linaro.org
Now we have moved all the uses of vfp.fp_status and FPST_FPCR
to either the A32 or A64 fields, we can remove these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-13-peter.maydell@linaro.org
In the A64 decoder, use FPST_A64 rather than FPST_FPCR. By
doing an automated conversion of the whole file we avoid possibly
using more than one fpst value in a set_rmode/op/restore_rmode
sequence.
Patch created with
perl -p -i -e 's/FPST_FPCR(?!_)/FPST_A64/g' target/arm/tcg/translate-{a64,sve,sme}.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-12-peter.maydell@linaro.org
In the A32 decoder, use FPST_A32 rather than FPST_FPCR. By
doing an automated conversion of the whole file we avoid possibly
using more than one fpst value in a set_rmode/op/restore_rmode
sequence.
Patch created with
perl -p -i -e 's/FPST_FPCR(?!_)/FPST_A32/g' target/arm/tcg/translate-vfp.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-11-peter.maydell@linaro.org
The helpers vfp_cmps, vfp_cmpes, vfp_cmpd, vfp_cmped are used only from
the A32 decoder; the A64 decoder uses separate vfp_cmps_a64 etc helpers
(because for A64 we update the main NZCV flags and for A32 we update
the FPSCR NZCV flags). So we can make these helpers use the fp_status_a32
field instead of fp_status.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-10-peter.maydell@linaro.org
Use fp_status_a32 in the vjcvt helper function; this is called only
from the A32/T32 decoder and is not used inside a
set_rmode/restore_rmode sequence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-9-peter.maydell@linaro.org
In is_ebf(), we might be called for A64 or A32, but we have
the CPUARMState* so we can select fp_status_a64 or
fp_status_a32 accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Switch from vfp.fp_status to vfp.fp_status_a64 for helpers which:
* directly reference an fp_status field
* are called only from the A64 decoder
* are not called inside a set_rmode/restore_rmode sequence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250124162836.2332150-8-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We want to split the existing fp_status in the Arm CPUState into
separate float_status fields for AArch32 and AArch64. (This is
because new control bits defined by FEAT_AFP only have an effect for
AArch64, not AArch32.) To make this split we will:
* define new fp_status_a32 and fp_status_a64 which have
identical behaviour to the existing fp_status
* move existing uses of fp_status to fp_status_a32 or
fp_status_a64 as appropriate
* delete the old fp_status when it has no uses left
In this patch we add the new float_status fields.
We will also need to split fp_status_f16, but we will do that
as a separate series of patches.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-7-peter.maydell@linaro.org
In vfp_exceptbits_from_host(), we accumulate the FPSR flags in
an "int", and our return type is also "int". However, the only
callsite returns the same information as a uint32_t, and
more generally we handle FPSR values in the code as uint32_t,
not int. Bring this function in to line with that convention.
There is no behaviour change because none of the FPSR bits
we set in this function are bit 31. The input argument to
the function remains 'int' because that is the return type
of the softfloat get_float_exception_flags().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-6-peter.maydell@linaro.org
Use the FPSR_ named constants in vfp_exceptbits_from_host(),
rather than hardcoded magic numbers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-5-peter.maydell@linaro.org
The pseudocode ResetSVEState() does:
FPSR = ZeroExtend(0x0800009f<31:0>, 64);
but QEMU's arm_reset_sve_state() called vfp_set_fpcr() by accident.
Before the advent of FEAT_AFP, this was only setting a collection of
RES0 bits, which vfp_set_fpsr() would then ignore, so the only effect
was that we didn't actually set the FPSR the way we are supposed to
do. Once FEAT_AFP is implemented, setting the bottom bits of FPSR
will change the floating point behaviour.
Call vfp_set_fpsr(), as we ought to.
(Note for stable backports: commit 7f2a01e736 moved this function
from sme_helper.c to helper.c, but it had the same bug before the
move too.)
Cc: qemu-stable@nongnu.org
Fixes: f84734b874 ("target/arm: Implement SMSTART, SMSTOP")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-4-peter.maydell@linaro.org
We don't have any functional tests for this machine yet, thus let's
add a test with a MicroPython binary that is available online
(thanks to Joel Stanley for providing it, see:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg606064.html ).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20250124101709.1591761-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The `const_zero` crate provides a nice macro to zero type-specific
constants, which doesn't need to enumerates the fields one by one.
Introduce the `const_zero` macro to QEMU (along with its documentation), and
use it to simplify the implementation of `Zeroable` trait.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20250123163143.679841-1-zhao1.liu@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because register reset is within a borrow_mut() call, reset
does not need anymore a mut reference to the PL011State.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unify the "Interrupt" enum and the "INT_*" constants with a struct
that contains the bits. The "int_level" and "int_enabled" fields
could use a crate such as "bitflags".
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a step towards making memory ops use a shared reference to the
device type; it's not yet possible due to the calls to character device
functions.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull all the mutable fields of PL011State into a separate struct.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_irqs are not part of the vmstate, therefore they will remain in
PL011State. Update them if needed after regs_read()/regs_write().
Apply #[must_use] to functions that return whether the interrupt state
could have changed, so that it's harder to forget the call to update().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for moving all references to the registers and the FIFO into a
separate struct.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As an added bonus, this also makes the new function return u32 instead
of u64, thus factoring some casts into a single place.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
