This update introduces support for handling multi-output IRQs in the AST2700
interrupt controller (INTC), specifically for GICINT192_201. GICINT192_201 maps
1:10 to input IRQ 0 and output IRQs 0 to 9. Each status bit corresponds to a
specific IRQ.
Implemented "aspeed_intc_set_irq_handler_multi_outpins" to handle IRQs with
multiple output pins. Introduced "aspeed_intc_status_handler_multi_outpins"
for managing status registers associated with multi-output IRQs.
Added new IRQ definitions for GICINT192_201 in INTC.
Adjusted the IRQ array to accommodate 10 input pins and 19 output pins,
aligning with the new GICINT192_201 mappings.
|------------------------------|
| INTC |
|inpin[0:0]--------->outpin[0] |
|inpin[0:1]--------->outpin[1] |
|inpin[0:2]--------->outpin[2] |
|inpin[0:3]--------->outpin[3] |
orgates[0]-------> |inpin[0:4]--------->outpin[4] |
|inpin[0:5]--------->outpin[5] |
|inpin[0:6]--------->outpin[6] |
|inpin[0:7]--------->outpin[7] |
|inpin[0:8]--------->outpin[8] |
|inpin[0:9]--------->outpin[9] |
| |
orgates[1]------> |inpin[1]----------->outpin[10]|
orgates[2]------> |inpin[2]----------->outpin[11]|
orgates[3]------> |inpin[3]----------->outpin[12]|
orgates[4]------> |inpin[4]----------->outpin[13]|
orgates[5]------> |inpin[5]----------->outpin[14]|
orgates[6]------> |inpin[6]----------->outpin[15]|
orgates[7]------> |inpin[7]----------->outpin[16]|
orgates[8]------> |inpin[8]----------->outpin[17]|
orgates[9]------> |inpin[9]----------->outpin[18]|
|------------------------------|
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-17-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The INTC controller supports GICINT128 to GICINT136, mapping 1:1 to input and
output IRQs 0 to 8. Previously, the formula "address & 0x0f00" was used to
derive the IRQ index numbers.
However, the INTC controller also supports GICINT192_201, mapping 1 input IRQ
pin to 10 output IRQ pins. The pin numbers for input and output are different.
It is difficult to use a formula to determine the index number of INTC model
supported input and output IRQs.
To simplify and improve readability, introduces the AspeedINTCIRQ structure to
save the input/output IRQ index and its enable/status register address.
Introduce the "aspeed_2700_intc_irqs" table to store IRQ information for INTC.
Introduce the "aspeed_intc_get_irq" function to retrieve the input/output IRQ
pin index from the provided status/enable register address.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-15-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Added support for multiple output pins in the INTC controller to
accommodate the AST2700 A1.
Introduced "num_outpins" to represent the number of output pins. Updated the
IRQ handling logic to initialize and connect output pins separately from input
pins. Modified the "aspeed_soc_ast2700_realize" function to connect source
orgates to INTC and INTC to GIC128 - GIC136. Updated the "aspeed_intc_realize"
function to initialize output pins.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-13-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
To support AST2700 A1, some registers of the INTC(CPU Die) support one input
pin to multiple output pins. Renamed "num_ints" to "num_inpins" in the INTC
controller code for better clarity and consistency in naming conventions.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-12-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The previous implementation set the "aspeed_intc_ops" struct, containing read
and write callbacks, to be used when I/O is performed on the INTC region.
Both "aspeed_intc_read" and "aspeed_intc_write" callback functions were used
for INTC (CPU Die).
To support the INTCIO (IO Die) model, introduces a new "reg_ops" class
attribute. This allows setting different memory region operations to support
different INTC models.
Will introduce "aspeed_intcio_read" and "aspeed_intcio_write" callback
functions are used for INTCIO.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-11-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the size of the "regs" array is 0x2000, which is too large. So far,
it only uses "GICINT128 to `GICINT134", and the offsets from 0 to 0x1000 are
unused. To save code size and avoid mapping large unused gaps, update to only
map the useful set of registers:
INTC register [0x1000 – 0x1804]
Update "reg_size" to 0x808. Introduce a new class attribute "reg_offset" to set
the start offset of a "INTC" sub-region. Set the "reg_offset" to 0x1000 for INTC
registers.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the size of the regs array is 0x2000, which is too large. So far,
it only use GICINT128 - GICINT134, and the offsets from 0 to 0x1000 are unused.
To save code size, introduce a new class attribute "reg_size" to set the
different register sizes for the INTC models in AST2700 and add a regs
sub-region in the memory container.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, the size of the "regs" array is 0x2000, which is too large. To save
code size and avoid mapping large unused gaps, will update it to only map the
useful set of registers. This update will support multiple sub-regions with
different sizes.
To address the redundant size issue, replace the static "regs" array with a
dynamically allocated "regs" memory.
Introduce a new "aspeed_intc_unrealize" function to free the allocated "regs"
memory.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
According to the AST2700 datasheet, the INTC(CPU DIE) controller has 16KB
(0x4000) of register space, and the INTCIO (I/O DIE) controller has 1KB (0x400)
of register space.
Introduced a new class attribute "mem_size" to set different memory sizes for
the INTC models in AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250307035945.3698802-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add logic cpu index input parameter for function cpu_by_arch_id,
CPUState::cpu_index is logic cpu slot index for possible_cpus.
At the same time it is logic index with LoongsonIPICommonState::IPICore,
here hide access for CPUState::cpu_index directly, it comes from
function cpu_by_arch_id().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Supported CPU number can be acquired from function
possible_cpu_arch_ids(), cpu-num property is not necessary and can
be removed.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Supported CPU number can be acquired from function
possible_cpu_arch_ids(), cpu-num property is not necessary.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
-----BEGIN PGP SIGNATURE-----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=0iQW
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu into staging
RISC-V PR for 10.0
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmdkzjgACgkQr3yVEwxT
# gBOcyA//e0XhAQciQglCZZCfINdOyI8qSh+P2K0qtrXZ4VERHEMp7UoD5CQr2cZv
# h8ij1EkatXCwukVELx0rNckxG33bEFgG1oESnQSrwGE0Iu4csNW24nK5WlUS0/r+
# A5oD2wtzEF+cbhTKrVSDBN/PvlnWTKGEoJRkuXWfz5d4uR9eyQhfED0S2j36lNEC
# X1x/OZoKM89XuXtOFe9g55Z5UNzAatcdTISozL0FydiPh7QeVjTLHh28/tt559MX
# 7v5aJFlQuZ78z1mIHkZmPSorSrJ0zqhkP6NWe1ae06oMgzwRQQhYLppDILV4ZgUF
# 3mSDRoXmBycQXiYNPcHep3LdXfvxr+PpWHSevx8gH1jwm93On7Y/H7Uol6TDXzfC
# mrFjalfV5tzrD90ZvB+s5bCMF1q5Z8Dlj0pYF9aN9P1ILoWy3dndFAPJB6uKKDP7
# Qd4qOQ3dVyHAX9jLmVkB6QvAV/vTDrYTsAxaF/EaoLOy0IoKhjTvgda3XzE1MFKA
# gVafLluADIfSEdqa2QR2ExL8d1SZVoiObCp5TMLRer0HIpg/vQZwjfdbo4BgQKL3
# 7Q6wBxcZUNqrFgspXjm5WFIrdk2rfS/79OmvpNM6SZaK6BnklntdJHJHtAWujGsm
# EM310AUFpHMp2h6Nqnemb3qr5l4d20KSt8DhoPAUq1IE59Kb8XY=
# =0iQW
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Dec 2024 20:54:00 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu: (39 commits)
target/riscv: add support for RV64 Xiangshan Nanhu CPU
target/riscv: add ssstateen
target/riscv/tcg: hide warn for named feats when disabling via priv_ver
target/riscv: Include missing headers in 'internals.h'
target/riscv: Include missing headers in 'vector_internals.h'
target/riscv: Check svukte is not enabled in RV32
target/riscv: Expose svukte ISA extension
target/riscv: Check memory access to meet svukte rule
target/riscv: Support hstatus[HUKTE] bit when svukte extension is enabled
target/riscv: Support senvcfg[UKTE] bit when svukte extension is enabled
target/riscv: Add svukte extension capability variable
hw/riscv: Add the checking if DTB overlaps to kernel or initrd
hw/riscv: Add a new struct RISCVBootInfo
hw/riscv: Support to load DTB after 3GB memory on 64-bit system.
hw/char/riscv_htif: Clarify MemoryRegionOps expect 32-bit accesses
hw/char/riscv_htif: Explicit little-endian implementation
MAINTAINERS: Cover RISC-V HTIF interface
tests/qtest/bios-tables-test: Update virt SPCR golden reference for RISC-V
hw/acpi: Upgrade ACPI SPCR table to support SPCR table revision 4 format
qtest: allow SPCR acpi table changes
...
Conflicts:
target/riscv/cpu.c
Merge conflict with DEFINE_PROP_END_OF_LIST() removal. No Property
array terminator is needed anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The last step to enable KVM AIA aplic-imsic with irqchip in split mode
is to deal with how MSIs are going to be sent. In our current design we
don't allow an APLIC controller to send MSIs unless it's on m-mode. And
we also do not allow Supervisor MSI address configuration via the
'smsiaddrcfg' and 'smsiaddrcfgh' registers unless it's also a m-mode
APLIC controller.
Add a new RISCVACPLICState attribute called 'kvm_msicfgaddr'. This
attribute represents the base configuration address for MSIs, in our
case the base addr of the IMSIC controller. This attribute is being set
only when running irqchip_split() mode with aia=aplic-imsic.
During riscv_aplic_msi_send() we'll check if the attribute was set to
skip the check for a m-mode APLIC controller and to change the resulting
MSI addr by adding kvm_msicfgaddr right before address_space_stl_le().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current logic to determine if we don't need an emulated APLIC
controller, i.e. KVM will provide for us, is to determine if we're
running KVM, with in-kernel irqchip support, and running
aia=aplic-imsic. This is modelled by riscv_is_kvm_aia_aplic_imsic() and
virt_use_kvm_aia_aplic_imsic().
This won't suffice to support irqchip_split() mode: it will match
exactly the same conditions as the one above, but setting the irqchip to
'split' mode will now require us to emulate an APLIC s-mode controller,
like we're doing with 'aia=aplic'.
Create a new riscv_use_emulated_aplic() helper that will encapsulate
this logic. Replace the uses of "riscv_is_kvm_aia_aplic_imsic()" with
this helper every time we're taking a decision on emulate an APLIC
controller or not. Do the same in virt.c with virt_use_emulated_aplic().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The helper is_kvm_aia() is checking not only for AIA, but for
aplic-imsic (i.e. "aia=aplic-imsic" in 'virt' RISC-V machine) with an
in-kernel chip present.
Rename it to be a bit clear what the helper is doing since we'll add
more AIA helpers in the next patches.
Make the helper public because the 'virt' machine will use it as well.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241119191706.718860-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Remove definition about LoongArchExtIOI and LOONGARCH_EXTIOI, and
replace them with LoongArchExtIOICommonState and macro
LOONGARCH_EXTIOI_COMMON separately. Also remove unnecessary header
files.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add vmstate pre_save interface, which can be used extioi kvm driver
in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Set TYPE_LOONGARCH_EXTIOI inherit from TYPE_LOONGARCH_EXTIOI_COMMON
object, it shares vmsate and property of TYPE_LOONGARCH_EXTIOI_COMMON,
and has its own realize() function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Rename structure LoongArchExtIOI with LoongArchExtIOICommonState,
since it is defined in file loongarch_extioi_common.h
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Move definiton of structure LoongArchExtIOI from header file loongarch_extioi.h
to file loongarch_extioi_common.h.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add common header file include/hw/intc/loongarch_extioi_common.h, and
move some macro definition from include/hw/intc/loongarch_extioi.h to
the common header file.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Remove definition about LoongArchPCHPIC and LOONGARCH_PCH_PIC, and
replace them with LoongArchPICCommonState and LOONGARCH_PIC_COMMON
separately. Also remove unnecessary header files.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add vmstate pre_save and post_load interfaces, which can be used
by pic kvm driver in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Set TYPE_LOONGARCH_PIC inherit from TYPE_LOONGARCH_PIC_COMMON object,
it shares vmsate and property of TYPE_LOONGARCH_PIC_COMMON, and has
its own realize() function.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Move structure LoongArchPCHPIC from header file loongarch_pch_pic.h
to file loongarch_pic_common.h, and rename structure name with
LoongArchPICCommonState.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Add common header file hw/intc/loongarch_pic_common.h, and move
some macro definition from hw/intc/loongarch_pch_pic.h to the common
header file.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Now we have official uint32_t bit array functions in bitops.h, use
them instead of the hand-rolled local versions.
We retain gic_bmp_replace_bit() because bitops doesn't provide that
specific functionality.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241108135514.4006953-3-peter.maydell@linaro.org
Loongarch IPI is added here, it inherits from class
TYPE_LOONGSON_IPI_COMMON, and two interfaces get_iocsr_as() and
cpu_by_arch_id() are added for Loongarch 3A5000 machine. It can
be used when ipi is emulated in userspace with KVM mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Rebased and simplified]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-13-philmd@linaro.org>
Move the common code from loongson_ipi.c to loongson_ipi_common.c,
call parent_realize() instead of loongson_ipi_common_realize() in
loongson_ipi_realize().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-12-philmd@linaro.org>
In order to access loongson_ipi_core_read/write helpers
from loongson_ipi_common.c in the next commit, make their
prototype declaration public.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-11-philmd@linaro.org>
Allow Loongson IPI implementations to have their own
cpu_by_arch_id() handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-10-philmd@linaro.org>
Allow Loongson IPI implementations to have their own get_iocsr_as()
handler.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-9-philmd@linaro.org>
Move the IPICore structure and corresponding common fields
of LoongsonIPICommonState to "hw/intc/loongson_ipi_common.h".
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-7-philmd@linaro.org>
It is easier to manage one array of MMIO MR rather
than one per vCPU.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-6-philmd@linaro.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-5-philmd@linaro.org>
Introduce LOONGSON_IPI_COMMON stubs, QDev parent of LOONGSON_IPI.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-4-philmd@linaro.org>
We'll have to add LoongsonIPIClass in few commits,
so rename LoongsonIPI as LoongsonIPIState for clarity.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
[PMD: Extracted from bigger commit, added commit description]
Co-Developed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20240805180622.21001-2-philmd@linaro.org>
Remove extioi INT_encode encode mode, because we don't emulate it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240718083254.748179-1-gaosong@loongson.cn>
The real IPI hardware have dedicated MMIO registers mapped into
memory address space for every core. This is not used by LoongArch
guest software but it is essential for CPU without IOCSR such as
Loongson-3A1000.
Implement it with existing infrastructure.
Acked-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-ID: <20240605-loongson3-ipi-v3-2-ddd2c0e03fa3@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Replace Monitor API by HumanReadableText one (see commit f2de406f29
"docs/devel: document expectations for QAPI data modelling for QMP"
for rationale).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240610063518.50680-2-philmd@linaro.org>
AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.
Introduce a new aspeed_intc class with instance_init and realize handlers.
So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.
If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).
Block diagram of GICINT132:
GICINT132
ETH1 +-----------+
+-------->+0 3|
ETH2 | 4|
+-------->+1 5|
ETH3 | 6|
+-------->+2 19| INTC GIC
UART0 | 20| +--------------------------+
+-------->+7 21| | | +--------------+
UART1 | 22| |orgate0 +----> output_pin0+----------->+GIC128 |
+-------->+8 23| | | | |
UART2 | 24| |orgate1 +----> output_pin1+----------->+GIC129 |
+-------->+9 25| | | | |
UART3 | 26| |orgate2 +----> output_pin2+----------->+GIC130 |
+--------->10 27| | | | |
UART5 | 28| |orgate3 +----> output_pin3+----------->+GIC131 |
+-------->+11 29| | | | |
UART6 | +----------->+orgate4 +----> output_pin4+----------->+GIC132 |
+-------->+12 30| | | | |
UART7 | 31| |orgate5 +----> output_pin5+----------->+GIC133 |
+-------->+13 | | | | |
UART8 | OR[0:31] | |orgate6 +----> output_pin6+----------->+GIC134 |
---------->14 | | | | |
UART9 | | |orgate7 +----> output_pin7+----------->+GIC135 |
--------->+15 | | | | |
UART10 | | |orgate8 +----> output_pin8+----------->+GIC136 |
--------->+16 | | | +--------------+
UART11 | | +--------------------------+
+-------->+17 |
UART12 | |
+--------->18 |
| |
| |
| |
+-----------+
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[clg: Fixed class_size in TYPE_ASPEED_INTC definition ]
This device will be shared among LoongArch and MIPS
based Loongson machine, rename it as loongson_ipi
to reflect this nature.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240508-loongson3-ipi-v1-2-1a7b67704664@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Move it to the existing "PIC related things" header, hw/intc/i8259.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the NMIAR CPU interface registers which deal with acknowledging NMI.
When introduce NMI interrupt, there are some updates to the semantics for the
register ICC_IAR1_EL1 and ICC_HPPIR1_EL1. For ICC_IAR1_EL1 register, it
should return 1022 if the intid has non-maskable property. And for
ICC_NMIAR1_EL1 register, it should return 1023 if the intid do not have
non-maskable property. Howerever, these are not necessary for ICC_HPPIR1_EL1
register.
And the APR and RPR has NMI bits which should be handled correctly.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: Separate out whether cpuif supports NMI from whether the
GIC proper (IRI) supports NMI]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-19-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A SPI, PPI or SGI interrupt can have non-maskable property. So maintain
non-maskable property in PendingIrq and GICR/GICD. Since add new device
state, it also needs to be migrated, so also save NMI info in
vmstate_gicv3_cpu and vmstate_gicv3.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240407081733.3231820-16-ruanjinjie@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
