Fixes and improvements in the floating point exception
handling in the hppa system and user emulation.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaC7b/QAKCRD3ErUQojoP
X8IPAQCZGjG3+iwJJuJkL6dSu7WKWgidX16zIxeRYQl+FXTpkAD9FBQ/nDP+EAFN
5hQTeiixyj3xIsZHPeHwfzhWiBUwQAo=
=Q3zi
-----END PGP SIGNATURE-----
Merge tag 'hppa-fpe-fixup-pull-request' of https://github.com/hdeller/qemu-hppa into staging
HPPA floating point exception handling fixes
Fixes and improvements in the floating point exception
handling in the hppa system and user emulation.
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaC7b/QAKCRD3ErUQojoP
# X8IPAQCZGjG3+iwJJuJkL6dSu7WKWgidX16zIxeRYQl+FXTpkAD9FBQ/nDP+EAFN
# 5hQTeiixyj3xIsZHPeHwfzhWiBUwQAo=
# =Q3zi
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 22 May 2025 04:10:37 EDT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-fpe-fixup-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Fix FPE exceptions
linux-user/hppa: Send proper si_code on SIGFPE exception
target/hppa: Copy instruction code into fr1 on FPU assist fault
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Improve the linux-user emulation to send the correct si_code depending
on overflow (TARGET_FPE_FLTOVF), underflow (TARGET_FPE_FLTUND), ...
Note that the hardware stores the relevant flags in FP exception
register #1, which is actually the lower 32-bits of the 64-bit fr[0]
register in qemu.
Signed-off-by: Helge Deller <deller@gmx.de>
Remove GUEST_ADDR_MAX and add guest_addr_max.
Initialize it in *-user/main.c, after reserved_va.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use vaddr instead of abi_ptr or target_ulong for a guest address.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"exec/exec-all.h" is now fully empty, let's remove it.
Mechanical change running:
$ sed -i '/exec\/exec-all.h/d' $(git grep -wl exec/exec-all.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-14-philmd@linaro.org>
Use vaddr instead of target_ulong. At the same time,
use int instead of unsigned long for flags, to match
page_set_flags().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the next patch, page_unprotect will need to pass
the CPUState to tb_invalidate_phys_page_unwind.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Check whether we need to swap at runtime using
target_needs_bswap().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250417131004.47205-2-philmd@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCaAmmRQAKCRBAov/yOSY+
3yZoA/4udi9ZmLsaiPqfKCS+0eF8XScIT493lVD359lFTBTT7mshh9PPhTLzdtiC
8fcfYi7jSjfC9gGTjPgnNCOzKIg3Gbdl61AFDgIwd8q/5HQAgonHAywTUtmqDaPK
bXZ/JkkJQby2dla6015XKQS/d/EXWHgYjrcb1JZIRoaLworZPw==
=zBCJ
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250424' of https://github.com/gaosong715/qemu into staging
pull-loongarch-20230424
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCaAmmRQAKCRBAov/yOSY+
# 3yZoA/4udi9ZmLsaiPqfKCS+0eF8XScIT493lVD359lFTBTT7mshh9PPhTLzdtiC
# 8fcfYi7jSjfC9gGTjPgnNCOzKIg3Gbdl61AFDgIwd8q/5HQAgonHAywTUtmqDaPK
# bXZ/JkkJQby2dla6015XKQS/d/EXWHgYjrcb1JZIRoaLworZPw==
# =zBCJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 23 Apr 2025 22:47:33 EDT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20250424' of https://github.com/gaosong715/qemu:
target/loongarch: Guard BCEQZ/BCNEZ instructions with FP feature
target/loongarch: Add CRC feature flag and use it to gate CRC instructions
linux-user/loongarch64: Decode BRK break codes for FPE signals
target/loongarch: Move definition of TCG specified function to tcg directory
target/loongarch: Add static definition with function loongarch_tlb_search()
target/loongarch: Move function loongarch_tlb_search to directory tcg
target/loongarch: Define function loongarch_get_addr_from_tlb() non-static
target/loongarch: Set function loongarch_map_address() with common code
target/loongarch: Add stub function loongarch_get_addr_from_tlb
target/loongarch: Move function get_dir_base_width to common directory
target/loongarch: Add function loongarch_get_addr_from_tlb
target/loongarch: Move header file helper.h to directory tcg
hw/intc/loongarch_pch_msi: Remove gpio input handler
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A few functions now end with a label. The next commit will clean them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-3-armbru@redhat.com>
[Straightforward conflict with commit 988ad4cceb (hw/loongarch/virt:
Fix cpuslot::cpu set at last in virt_cpu_plug()) resolved]
Handle specific LoongArch BRK break codes in user-mode emulation
to deliver accurate floating-point exception signals. Specifically,
BRK_OVERFLOW (6) triggers TARGET_FPE_INTOVF, and BRK_DIVZERO (7)
triggers TARGET_FPE_INTDIV. Other BRK codes fall back to a generic
SIGTRAP.
This improves correctness for programs that rely on BRK to signal
overflow or divide-by-zero conditions.
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20250414074952.6253-1-wangrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Split out mmap_lock, et al from page-protection.h
to a new header.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* pl011: pad C PL011State struct to same size as Rust struct
* rust: hpet: fix type of "timers" property
* rust: hpet: fix functional tests (and really everything that uses it)
* rust: Kconfig: Factor out whether devices are Rust or C
* rust: vmstate: Fixes and tests
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfdsUsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOGpwf/Qk4bAcLX7A1/nOmYT+DtWzZ9V/VS
hSOe6BruzW8rzwMyn/d7oR+aUpk3sL+v2iPBWqoZ/wh0w8kcABcUfWsqqGI8ln/K
pnTdiC+hra5z0AFH1tmjjtOI50WDOeSjh5SFvoPJtGzhEbo89QvsUWgy98HiHOMm
YFPDuhg3Pfd1XDcdoaa85sOHO1vDsj45fCEJhx6Ktib4vOlEm2I4Z9YR/JxNMT33
vy/y09HG4cpc6bWKLPL3nqR9RchUSI+YRDZ8rlaXUowiZzH2K/wi0qJOsvG6oJF5
awni0YWuwyFi16jmUub8NFnWk6NKjbACqw74AwoVPbNbDoCrrogXzIF2Lw==
=NzCN
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* exec/cpu-all: remove BSWAP_NEEDED
* pl011: pad C PL011State struct to same size as Rust struct
* rust: hpet: fix type of "timers" property
* rust: hpet: fix functional tests (and really everything that uses it)
* rust: Kconfig: Factor out whether devices are Rust or C
* rust: vmstate: Fixes and tests
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfdsUsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOGpwf/Qk4bAcLX7A1/nOmYT+DtWzZ9V/VS
# hSOe6BruzW8rzwMyn/d7oR+aUpk3sL+v2iPBWqoZ/wh0w8kcABcUfWsqqGI8ln/K
# pnTdiC+hra5z0AFH1tmjjtOI50WDOeSjh5SFvoPJtGzhEbo89QvsUWgy98HiHOMm
# YFPDuhg3Pfd1XDcdoaa85sOHO1vDsj45fCEJhx6Ktib4vOlEm2I4Z9YR/JxNMT33
# vy/y09HG4cpc6bWKLPL3nqR9RchUSI+YRDZ8rlaXUowiZzH2K/wi0qJOsvG6oJF5
# awni0YWuwyFi16jmUub8NFnWk6NKjbACqw74AwoVPbNbDoCrrogXzIF2Lw==
# =NzCN
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Mar 2025 14:34:51 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
rust: hpet: fix decoding of timer registers
rust/vmstate: Include complete crate path of VMStateFlags in vmstate_clock
rust/vmstate: Add unit test for vmstate_validate
rust/vmstate: Add unit test for pointer case
rust/vmstate: Add unit test for vmstate_{of|struct} macro
rust/vmstate: Add unit test for vmstate_of macro
rust/vmstate: Support vmstate_validate
rust/vmstate: Re-implement VMState trait for timer binding
rust/vmstate: Relax array check when build varray in vmstate_struct
rust/vmstate: Fix unnecessary VMState bound of with_varray_flag()
rust/vmstate: Fix "cannot infer type" error in vmstate_struct
rust/vmstate: Fix type check for varray in vmstate_struct
rust/vmstate: Fix size field of VMStateField with VMS_ARRAY_OF_POINTER flag
rust/vmstate: Fix num field when varray flags are set
rust/vmstate: Fix num_offset in vmstate macros
rust/vmstate: Remove unnecessary unsafe
exec/cpu-all: remove BSWAP_NEEDED
load_aout: replace bswap_needed with big_endian
rust: pl011: Check size of state struct at compile time
hw/char/pl011: Pad PL011State struct to same size as Rust impl
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This identifier is poisoned, so it can't be used from common code
anyway. We replace all occurrences with its definition directly.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Link: https://lore.kernel.org/r/20250320223002.2915728-2-pierrick.bouvier@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The third argument of the syscall contains the size of the
cpu mask in bytes, not bits. Nor is the size rounded up to
a multiple of sizeof(abi_ulong).
Cc: qemu-stable@nongnu.org
Reported-by: Andreas Schwab <schwab@suse.de>
Fixes: 9e1c7d982d ("linux-user/riscv: Add syscall riscv_hwprobe")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250308225902.1208237-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In linux-user/arm/cpu_loop.c we define a full set of get/put
macros for both code and data (since the endianness handling
is different between the two). However the only one we actually
use is get_user_code_u32(). Remove the rest.
We leave a comment noting how data-side accesses should be handled
for big-endian, because that's a subtle point and we just removed the
macros that were effectively documenting it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
At the top of linux-user/aarch64/cpu_loop.c we define a set of
macros for reading and writing data and code words, but we never
use these macros. Delete them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
To move the main api.c to a single build compilation object we need to
start splitting out user and system specific code. As we need to grob
around host headers we move these particular helpers into the *-user
mode directories.
The binary/start/end/entry helpers are all NOPs for system mode.
While using the plugin-api.c.inc trick means we build for both
linux-user and bsd-user the BSD user-mode command line is still
missing -plugin. This can be enabled once we have reliable check-tcg
tests working for the BSDs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250304222439.2035603-27-alex.bennee@linaro.org>
CpuState caches its CPUClass since commit 6fbdff8706
("cpu: cache CPUClass in CPUState for hot code paths"),
use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250122093028.52416-7-philmd@linaro.org>
Keep common MMAP-related declarations in a single place.
Note, this disable ThreadSafetyAnalysis on Linux for:
- mmap_fork_start()
- mmap_fork_end().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250308122842.76377-4-philmd@linaro.org>
Very few source files require to access "exec/tb-flush.h"
declarations, and except a pair, they all include it
explicitly. No need to overload the generic "user-internals.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250102182521.65428-2-philmd@linaro.org>
While qemu-system can set tb-size using -accel tcg,tb-size=n, there
is no similar knob for qemu-user. Add one in a way similar to how
one-insn-per-tb is already handled.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240730215532.1442-1-iii@linux.ibm.com>
TCGCPUOps structure makes more sense in the accelerator context
rather than hardware emulation. Move it under the accel/tcg/ scope.
Mechanical change doing:
$ sed -i -e 's,hw/core/tcg-cpu-ops.h,accel/tcg/cpu-ops.h,g' \
$(git grep -l hw/core/tcg-cpu-ops.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-11-philmd@linaro.org>
SA_RESTORER and the associated sa_restorer field of struct sigaction are
an obsolete feature, not expected to be used by future architectures.
They are also absent on RISC-V, LoongArch, Hexagon and OpenRISC, but
defined due to their use of generic/signal.h. This leads to corrupted
data and out-of-bounds accesses.
Move the definition of TARGET_SA_RESTORER out of generic/signal.h into the
target_signal.h files that need it. Note that m68k has the sa_restorer
field, but does not use it and does not define SA_RESTORER.
Reported-by: Thomas Weißschuh <thomas@t-8ch.de>
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <mvmed060xc9.fsf@suse.de>
When complying with the alignment requested in the ELF and unmapping
the excess reservation, having align_end not aligned to the guest page
causes the unmap to be rejected by the alignment check at
target_munmap and later brk adjustments hit an EEXIST.
Fix by aligning the start of region to be unmapped.
Fixes: c81d1fafa6 ("linux-user: Honor elf alignment when placing images")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1913
Signed-off-by: Fabiano Rosas <farosas@suse.de>
[rth: Align load_end as well.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250213143558.10504-1-farosas@suse.de>
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
=UF0n
-----END PGP SIGNATURE-----
Merge tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
# KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
# 2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
# NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
# 42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
# Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
# 87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
# =UF0n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Feb 2025 08:54:51 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: Add late gdbstub attach test
docs/user: Document the %d placeholder and suspend=n QEMU_GDB features
gdbstub: Allow late attachment
osdep: Introduce qemu_kill_thread()
user: Introduce host_interrupt_signal
user: Introduce user/signal.h
gdbstub: Try unlinking the unix socket before binding
gdbstub: Allow the %d placeholder in the socket path
tests/qtest/migration: Pick smoke tests
tests/qtest/migration: Add --full option
Revert "util/timer: avoid deadlock when shutting down"
tests/qtest: tighten up the checks on clock_step
tests/qtest: rename qtest_send_prefix and roll-up into qtest_send
tests/qtest: simplify qtest_process_inbuf
tests/qtest: don't step clock at start of npcm7xx periodic IRQ test
tests/qtest: don't attempt to clock_step while waiting for virtio ISR
tests/docker: replicate the check-rust-tools-nightly CI job
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow debugging individual processes in multi-process applications by
starting them with export QEMU_GDB=/tmp/qemu-%d.sock,suspend=n.
Currently one would have to attach to every process to ensure the app
makes progress.
In case suspend=n is not specified, the flow remains unchanged. If it
is specified, then accepting the client connection is delegated to a
thread. In the future this machinery may be reused for handling
reconnections and interruptions.
On accepting a connection, the thread schedules gdb_handlesig() on the
first CPU and wakes it up with host_interrupt_signal. Note that the
result of this gdb_handlesig() invocation is handled, as opposed to
many other existing call sites. These other call sites probably need to
be fixed separately.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-7-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-16-alex.bennee@linaro.org>
Attaching to the gdbstub of a running process requires stopping its
threads. For threads that run on a CPU, cpu_exit() is enough, but the
only way to grab attention of a thread that is stuck in a long-running
syscall is to interrupt it with a signal.
Reserve a host realtime signal for this, just like it's already done
for TARGET_SIGABRT on Linux. This may reduce the number of available
guest realtime signals by one, but this is acceptable, since there are
quite a lot of them, and it's unlikely that there are apps that need
them all.
Set signal_pending for the safe_sycall machinery to prevent invoking
the syscall. This is a lie, since we don't queue a guest signal, but
process_pending_signals() can handle the absence of pending signals.
The syscall returns with QEMU_ERESTARTSYS errno, which arranges for
the automatic restart. This is important, because it helps avoiding
disturbing poorly written guests.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-5-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-14-alex.bennee@linaro.org>
gdbstub needs target_to_host_signal(), so move its declaration to a
public header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-13-alex.bennee@linaro.org>
This fixes the following qemu warnings when building debian gupnp package:
Unknown host QEMU_IFLA type: 61
Unknown host QEMU_IFLA type: 58
Unknown host QEMU_IFLA type: 59
Unknown host QEMU_IFLA type: 60
Unknown host QEMU_IFLA type: 32820
QEMU_IFLA type 32820 is actually NLA_NESTED | QEMU_IFLA_PROP_LIST (a nested
entry), which is why rta_type needs to be masked with NLA_TYPE_MASK.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Fixes various warnings in the testsuite while building gupnp:
gssdp-net-DEBUG: Failed to send netlink message: Operation not supported
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (192.168.1.2, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host IP (fe80::01, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Failed to parse HOST header from request: Invalid IPv6 address ?[fe80::01%1]? in URI
gupnp-context-DEBUG: Failed to parse HOST header from request: Invalid IPv6 address ?[fe80::01%eth0]? in URI
gupnp-context-DEBUG: Failed to parse HOST header from request: Could not parse port ?:1? in URI
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Add IP_MULTICAST_IF and share the code with IP_ADD_MEMBERSHIP / IP_DROP_MEMBERSHIP.
Sharing the code makes sense, because the manpage of ip(7) says:
IP_MULTICAST_IF (since Linux 1.2)
Set the local device for a multicast socket. The argument
for setsockopt(2) is an ip_mreqn or (since Linux 3.5)
ip_mreq structure similar to IP_ADD_MEMBERSHIP, or an
in_addr structure. (The kernel determines which structure
is being passed based on the size passed in optlen.) For
getsockopt(2), the argument is an in_addr structure.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Avoid using the same error message for two different code paths
as it complicates determining the one which actually triggered.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Fix this warning:
Unknown host IFA type: 11
While adding IFA_PROTO, convert all IFA_XXX values over to QEMU_IFA_XXX values
to avoid a build failure on Ubuntu 22.04 (kernel v5.18 which does not know
IFA_PROTO yet).
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
This started as a clean-up to properly pass a Error handler to the
gdbserver_start so we could do the right thing for command line and
HMP invocations.
Now that we have cleaned up foreach_device_config_or_exit() in earlier
patches we can further simplify by it by passing &error_fatal instead
of checking the return value. Having a return value is still useful
for HMP though so tweak the return to use a simple bool instead.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-11-alex.bennee@linaro.org>
Add some missing fields which may be parsed by userspace applications.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <Z39B1wzNNpndmOxZ@p100>
TB compile flags, tb_page_addr_t type, tb_cflags() and few
other methods are defined in "exec/translation-block.h".
All these files don't include "exec/translation-block.h" but
include "exec/exec-all.h" which include it. Explicitly include
"exec/translation-block.h" to be able to remove it from
"exec/exec-all.h" later when it won't be necessary. Otherwise
we'd get errors such:
accel/tcg/internal-target.h:59:20: error: a parameter list without types is only allowed in a function definition
59 | void tb_lock_page0(tb_page_addr_t);
| ^
accel/tcg/tb-hash.h:64:23: error: unknown type name 'tb_page_addr_t'
64 | uint32_t tb_hash_func(tb_page_addr_t phys_pc, vaddr pc,
| ^
accel/tcg/tcg-accel-ops.c:62:36: error: use of undeclared identifier 'CF_CLUSTER_SHIFT'
62 | cflags = cpu->cluster_index << CF_CLUSTER_SHIFT;
| ^
accel/tcg/watchpoint.c:102:47: error: use of undeclared identifier 'CF_NOIRQ'
102 | cpu->cflags_next_tb = 1 | CF_NOIRQ | curr_cflags(cpu);
| ^
target/i386/helper.c:536:28: error: use of undeclared identifier 'CF_PCREL'
536 | if (tcg_cflags_has(cs, CF_PCREL)) {
| ^
target/rx/cpu.c:51:21: error: incomplete definition of type 'struct TranslationBlock'
51 | cpu->env.pc = tb->pc;
| ~~^
system/physmem.c:2977:9: error: call to undeclared function 'tb_invalidate_phys_range'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
2977 | tb_invalidate_phys_range(addr, addr + length - 1);
| ^
plugins/api.c:96:12: error: call to undeclared function 'tb_cflags'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
96 | return tb_cflags(tcg_ctx->gen_tb) & CF_MEMI_ONLY;
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241114011310.3615-5-philmd@linaro.org>
The TranslationBlock flags are defined in 'exec/translation-block.h'.
tcg_cflags_has/set() use them, it is more logical to declare them in
the same place. Move them there too.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212144430.66224-2-philmd@linaro.org>
Move various declarations related to user emulation
from "exec/exec-all.h" to "user/cpu_loop.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-19-philmd@linaro.org>
Declare cpu_loop() once in "user/cpu_loop.h".
bsd-user gets the G_NORETURN attribute.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-18-philmd@linaro.org>
"linux-user/cpu_loop-common.h" is generic enough to be used by
bsd-user, so rename it as "user/cpu_loop.h".
Mechanical change running:
$ sed -i -e 's,cpu_loop-common.h,user/cpu_loop.h,' \
$(git grep -l cpu_loop-common.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-17-philmd@linaro.org>
