Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250110203401.178532-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-25-alex.bennee@linaro.org>
This attribute is not recognized by clang.
An investigation has been performed to ensure this attribute has no
effect on layout of structures we use in QEMU [1], so it's safe to
remove now.
In the future, we'll forbid introducing new bitfields in packed struct,
as they are the one potentially impacted by this change.
[1] https://lore.kernel.org/qemu-devel/66c346de-7e20-4831-b3eb-1cda83240af9@linaro.org/
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Weil <sw@weilnetz.de>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250110203401.178532-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-24-alex.bennee@linaro.org>
While it would be technically correct to allow an IRQ to happen (as
the offending instruction never really completed) it messes up
instrumentation. We already take care to only use memory
instrumentation on the block, we should also suppress IRQs.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Julian Ganz <neither@nut.email>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-23-alex.bennee@linaro.org>
This started as a clean-up to properly pass a Error handler to the
gdbserver_start so we could do the right thing for command line and
HMP invocations.
Now that we have cleaned up foreach_device_config_or_exit() in earlier
patches we can further simplify by it by passing &error_fatal instead
of checking the return value. Having a return value is still useful
for HMP though so tweak the return to use a simple bool instead.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-11-alex.bennee@linaro.org>
We don't need to wrap usb_device_add as usb_parse is already gated
with an if (machine_usb(current_machine)) check. Instead just assert
and directly fail if usbdevice_create returns NULL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-10-alex.bennee@linaro.org>
All of the failures to configure devices will result in QEMU exiting
with an error code. In preparation for passing Error * down the chain
re-name the iterator to foreach_device_config_or_exit and exit using
&error_fatal instead of returning a failure indication.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-9-alex.bennee@linaro.org>
config.c and console.c don't use any target specific
headers anymore, move them from specific_ss[] to
system_ss[] so they are built once, but will also be
linked once, removing global symbol clash in a single
QEMU binary.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250103171037.11265-6-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-8-alex.bennee@linaro.org>
The CPUState structure is declared in "hw/core/cpu.h",
the EXCP_HALTED definition in "exec/cpu-common.h".
Both headers are indirectly include by "cpu.h". In
order to remove "cpu.h" from "semihosting/console.h",
explicitly include them in console.c, otherwise we'd
get:
../semihosting/console.c:88:11: error: incomplete definition of type 'struct CPUState'
88 | cs->exception_index = EXCP_HALTED;
| ~~^
../semihosting/console.c:88:31: error: use of undeclared identifier 'EXCP_HALTED'
88 | cs->exception_index = EXCP_HALTED;
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250103171037.11265-5-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-7-alex.bennee@linaro.org>
ARM semihosting implementations in "common-semi-target.h"
must de-reference the target CPUArchState, which is declared
in each target "cpu.h" header. Include it in order to avoid
when refactoring:
In file included from ../../semihosting/arm-compat-semi.c:169:
../target/riscv/common-semi-target.h:16:5: error: use of undeclared identifier 'RISCVCPU'
16 | RISCVCPU *cpu = RISCV_CPU(cs);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250103171037.11265-4-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-6-alex.bennee@linaro.org>
TLB_INVALID_MASK is defined in "exec/cpu-all.h".
Include it in order to avoid when refactoring:
../semihosting/uaccess.c:41:21: error: use of undeclared identifier 'TLB_INVALID_MASK'
41 | if (flags & TLB_INVALID_MASK) {
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250103171037.11265-3-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-5-alex.bennee@linaro.org>
target_ulong is defined in each target "cpu-param.h",
itself included by "exec/cpu-defs.h".
Include the latter in order to avoid when refactoring:
include/semihosting/syscalls.h:26:24: error: unknown type name 'target_ulong'
26 | target_ulong fname, target_ulong fname_len,
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250103171037.11265-2-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-4-alex.bennee@linaro.org>
Since it is not obvious the get/put_user*() methods
can return an error, add brief docstrings about it.
Also remind to use *unlock_user() when appropriate.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212115413.42109-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-3-alex.bennee@linaro.org>
This usually indicates the semihosting call was expecting to find
something but didn't.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-2-alex.bennee@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Wz0V
-----END PGP SIGNATURE-----
Merge tag 'pull-xenfv-20250116' of git://git.infradead.org/users/dwmw2/qemu into staging
Xen regression fixes and cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEMUsIrNDeSBEzpfKGm+mA/QrAFUQFAmeIxhcSHGR3bXdAYW1h
# em9uLmNvLnVrAAoJEJvpgP0KwBVEbKoP/iqQ+PhbwT9+xz6lxW+g1Dx+YGrT/ugp
# d3xHn9AEkR0EHC42J6RB/llyWbKVD/IIhYwUk5GDm+4InGrtuQDhG6UqWxqvIRht
# 0JuZvVm7x5akmKv73igxNqZHVg0ZEAS+EllBUaBYWj0pvpMbBK93Sdz9PXKxA7Nm
# dPeFrOpL2TAmnDCH1UuBbXypHEjAghmv7WFphMtk6qLX+wYVaK3F2J/ed2TNyT0V
# LliOdQH0Pxt445SSVJIZRe9bW3FH7qyvZV1gCnxSnqPUlN7vBhpjzgl4hWEzVYcp
# 7X21ZAD9kPc81DJjYucbLjAbrqSmlDrJqL05qtRigfPcnqz2NoKrYxhj8B0F8mgt
# 1IbymPyeab5gk5Hi1QgMmG5eobDDaglDSxpq6gRfJBiJW+1adif00z/HVvt5onS0
# uQ6i6w5NzQciBX77muAb2ZDEMysjk+3wSJMMpkfl90D0kjlMqeWWs4FH9ThasjC+
# EhQioUD0euedgnzOSfQjNNtAW4gzv9rcShkcV84bjxP/0Es+Pgx9f6wtCUTzdeqy
# Cid8/72lHIgrkZGfpv8BBZkA1XP09vgtUGKyAWm4yHOcB57l8cNiL1nKtqoCLwkQ
# 8JWFWzFeEY19KoiRGY5saH6ExeOx8fmc/lYwqImZqFqvuFX4Vf2RJdTIRIYr7g05
# 2QffxFmskg+A
# =Wz0V
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jan 2025 03:40:55 EST
# gpg: using RSA key 314B08ACD0DE481133A5F2869BE980FD0AC01544
# gpg: issuer "dwmw@amazon.co.uk"
# gpg: Good signature from "David Woodhouse <dwmw@amazon.co.uk>" [unknown]
# gpg: aka "David Woodhouse <dwmw@amazon.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 314B 08AC D0DE 4811 33A5 F286 9BE9 80FD 0AC0 1544
* tag 'pull-xenfv-20250116' of git://git.infradead.org/users/dwmw2/qemu:
system/runstate: Fix regression, clarify BQL status of exit notifiers
hw/xen: Fix errp handling in xen_console
hw/xen: Use xs_node_read() from xenstore_read_str() instead of open-coding it
hw/xen: Use xs_node_read() from xen_netdev_get_name()
hw/xen: Use xs_node_read() from xen_console_get_name()
hw/xen: Use xs_node_read() from xs_node_vscanf()
xen: do not use '%ms' scanf specifier
hw/xen: Add xs_node_read() helper function
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ4hk/QAKCRAfewwSUazn
0WagAQDgJaWBLQxZkyQR2FQm3WHg3Uf/qolab9nDGo3b2BpixgD/RdvZf+mZpAwf
2ipAQ7g5GqGTKtTAdqO/aBAqTCZCqQU=
=7KKt
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250116' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ4hk/QAKCRAfewwSUazn
# 0WagAQDgJaWBLQxZkyQR2FQm3WHg3Uf/qolab9nDGo3b2BpixgD/RdvZf+mZpAwf
# 2ipAQ7g5GqGTKtTAdqO/aBAqTCZCqQU=
# =7KKt
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jan 2025 20:46:37 EST
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250116' of https://gitlab.com/bibo-mao/qemu:
hw/intc/loongarch_ipi: Use alternative implemation for cpu_by_arch_id
hw/intc/loongson_ipi: Add more input parameter for cpu_by_arch_id
hw/intc/loongarch_ipi: Remove property num-cpu
hw/intc/loongarch_ipi: Get cpu number from possible_cpu_arch_ids
hw/intc/loongson_ipi: Remove property num_cpu from loongson_ipi_common
hw/intc/loongson_ipi: Remove num_cpu from loongson_ipi_common
hw/intc/loongarch_ipi: Implement realize interface
target/loongarch: Add page table walker support for debugger usage
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The big thing here are:
stage-1 translation in vtd
internal migration in vhost-user
ghes driver preparation for error injection
new resource uuid feature in virtio gpu
new vmclock device
And as usual, fixes and cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmeIOiIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpORgIAL0clwZxQL7PIPJ91FwXc1bo6Do/HYquAzvH
eA+ryCG5S5ewh/e2R8SdIUG7nYesEMWJGVL1gb3BFu7wgGh1aLaaTxQ1LIo5HpRF
P0Ak3QO7TKIsSEcZIz9h3eMEpg6X9d8i2h7llp7H3qqXBbduO+cGfeNH/fZD5IEl
7DFvXuJUgUtZb38I+qtcO+9EQFKGHjgdQAN5P/I4vawWJdxN9sBfT4YVEgpVhiq/
ALxdSeaEiXA4EXexdHVZhXiQzEBsCQ78RZIIDiRE8I34cVY7rolTodKRfr4bip3P
6Llu11yvzNi1gppOzkny3QFsRza3hV0RisWYjAMTwLhNCdi/mHQ=
=GjDq
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes, cleanups
The big thing here are:
stage-1 translation in vtd
internal migration in vhost-user
ghes driver preparation for error injection
new resource uuid feature in virtio gpu
new vmclock device
And as usual, fixes and cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmeIOiIPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpORgIAL0clwZxQL7PIPJ91FwXc1bo6Do/HYquAzvH
# eA+ryCG5S5ewh/e2R8SdIUG7nYesEMWJGVL1gb3BFu7wgGh1aLaaTxQ1LIo5HpRF
# P0Ak3QO7TKIsSEcZIz9h3eMEpg6X9d8i2h7llp7H3qqXBbduO+cGfeNH/fZD5IEl
# 7DFvXuJUgUtZb38I+qtcO+9EQFKGHjgdQAN5P/I4vawWJdxN9sBfT4YVEgpVhiq/
# ALxdSeaEiXA4EXexdHVZhXiQzEBsCQ78RZIIDiRE8I34cVY7rolTodKRfr4bip3P
# 6Llu11yvzNi1gppOzkny3QFsRza3hV0RisWYjAMTwLhNCdi/mHQ=
# =GjDq
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jan 2025 17:43:46 EST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (49 commits)
hw/acpi: Add vmclock device
virtio-net: vhost-user: Implement internal migration
vhost: Add stubs for the migration state transfer interface
hw/cxl: Fix msix_notify: Assertion `vector < dev->msix_entries_nr`
tests: acpi: update expected blobs
pci: acpi: Windows 'PCI Label Id' bug workaround
tests: acpi: whitelist expected blobs
docs: acpi_hest_ghes: fix documentation for CPER size
acpi/ghes: Change ghes fill logic to work with only one source
acpi/ghes: move offset calculus to a separate function
acpi/ghes: better name the offset of the hardware error firmware
acpi/ghes: rename etc/hardware_error file macros
acpi/ghes: don't crash QEMU if ghes GED is not found
acpi/ghes: better name GHES memory error function
acpi/ghes: make the GHES record generation more generic
acpi/ghes: don't check if physical_address is not zero
acpi/ghes: Change the type for source_id
acpi/ghes: Remove a duplicated out of bounds check
acpi/ghes: Fix acpi_ghes_record_errors() argument
acpi/ghes: better handle source_id and notification
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The vmclock device addresses the problem of live migration with
precision clocks. The tolerances of a hardware counter (e.g. TSC) are
typically around ±50PPM. A guest will use NTP/PTP/PPS to discipline that
counter against an external source of 'real' time, and track the precise
frequency of the counter as it changes with environmental conditions.
When a guest is live migrated, anything it knows about the frequency of
the underlying counter becomes invalid. It may move from a host where
the counter running at -50PPM of its nominal frequency, to a host where
it runs at +50PPM. There will also be a step change in the value of the
counter, as the correctness of its absolute value at migration is
limited by the accuracy of the source and destination host's time
synchronization.
The device exposes a shared memory region to guests, which can be mapped
all the way to userspace. In the first phase, this merely advertises a
'disruption_marker', which indicates that the guest should throw away any
NTP synchronization it thinks it has, and start again.
Because the region can be exposed all the way to userspace, applications
can still use time from a fast vDSO 'system call', and check the
disruption marker to be sure that their timestamp is indeed truthful.
The structure also allows for the precise time, as known by the host, to
be exposed directly to guests so that they don't have to wait for NTP to
resync from scratch.
The values and fields are based on the nascent virtio-rtc specification,
and the intent is that a version (hopefully precisely this version) of
this structure will be included as an optional part of that spec. In the
meantime, a simple ACPI device along the lines of VMGENID is perfectly
sufficient and is compatible with what's being shipped in certain
commercial hypervisors.
Linux guest support was merged into the 6.13-rc1 kernel:
https://git.kernel.org/torvalds/c/205032724226
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <07fd5e2f529098ad4d7cab1423fe9f4a03a9cc14.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support of VHOST_USER_PROTOCOL_F_DEVICE_STATE in virtio-net
with vhost-user backend.
Cc: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20250115135044.799698-3-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Migration state transfer interface is only used by vhost-user-fs,
so the interface needs to be defined only when vhost is built.
But I need to use this interface with virtio-net and vhost is not always
enabled, and to avoid undefined reference error during build, define stub
functions for vhost_supports_device_state(), vhost_save_backend_state() and
vhost_load_backend_state().
Cc: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20250115135044.799698-2-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This assertion always happens when we sanitize the CXL memory device.
$ echo 1 > /sys/bus/cxl/devices/mem0/security/sanitize
It is incorrect to register an MSIX number beyond the device's capability.
Increase the device's MSIX number to cover the mailbox msix number(9).
Fixes: 43efb0bfad ("hw/cxl/mbox: Wire up interrupts for background completion")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Message-Id: <20250115075834.167504-1-lizhijian@fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current versions of Windows call _DSM(func=7) regardless
of whether it is supported or not. It leads to NICs having bogus
'PCI Label Id = 0', where none should be set at all.
Also presence of 'PCI Label Id' triggers another Windows bug
on localized versions that leads to hangs. The later bug is fixed
in latest updates for 'Windows Server' but not in consumer
versions of Windows (and there is no plans to fix it
as far as I'm aware).
Given it's easy, implement Microsoft suggested workaround
(return invalid Package) so that affected Windows versions
could boot on QEMU.
This would effectvely remove bogus 'PCI Label Id's on NICs,
but MS teem confirmed that flipping 'PCI Label Id' should not
change 'Network Connection' ennumeration, so it should be safe
for QEMU to change _DSM without any compat code.
Smoke tested with WinXP and WS2022
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/774
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250115125342.3883374-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250115125342.3883374-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While the spec defines a CPER size of 4KiB for each record,
currently it is set to 1KiB. Fix the documentation and add
a pointer to the macro name there, as this may help to keep
it updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <f7e94433bec19a9d6b23ecccc24b5fe3a6f7f52b.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extending to multiple sources require a BIOS pointer to the
beginning of the HEST table, which in turn requires a backward-compatible
code.
So, the current code supports only one source. Ensure that and simplify
the code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <66bddd42a64c8515ad98b9975d953b4a70ffcc6d.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, CPER address location is calculated as an offset of
the hardware_errors table. It is also badly named, as the
offset actually used is the address where the CPER data starts,
and not the beginning of the error source.
Move the logic which calculates such offset to a separate
function, in preparation for a patch that will be changing the
logic to calculate it from the HEST table.
While here, properly name the variable which stores the cper
address.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <60fdd1bf379ba1db3099710868802aa49a27febb.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The hardware error firmware is where HEST error structures are
stored. Those can be GHESv2, but they can also be other types.
Better name the location of the hardware error.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <ddbb94294bafee998f12fede3ba0b05dae5ee45f.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we have also have a file to store HEST data location,
which is part of GHES, better name the file where CPER records
are stored.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <e79a013bcd9f634b46ff6b34756d1b1403713af3.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make error handling within ghes_record_cper_errors() consistent,
i.e. instead abort just print a error in case ghes GED is not found.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <c7e1665ba46df321f0ce161d60dfd681ab827535.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current function used to generate GHES data is specific for
memory errors. Give a better name for it, as we now have a generic
function as well.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-Id: <35b59121129d5e99cb5062cc3d775594bbb0905b.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split the code into separate functions to allow using the
common CPER filling code by different error sources.
The generic code was moved to ghes_record_cper_errors(),
and ghes_gen_err_data_uncorrectable_recoverable() now contains
only a logic to fill the Generic Error Data part of the record,
as described at:
ACPI 6.2: 18.3.2.7.1 Generic Error Data
The remaining code to generate a memory error now belongs to
acpi_ghes_record_errors() function.
A further patch will give it a better name.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <68d9f787d8c4fc8d1dbc227d6902fe801e42dea9.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'physical_address' value is a faulty page. As such, 0 is
as valid as any other value.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <da32536bf4962e5c03471e2a4e6e0ef92be4a1be.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As described at: ACPI 6.5 spec at:
18.3.2. ACPI Error Source
In particular at GHES/GHESv2 table:
Table 18.10 Generic Hardware Error Source Structure
HEST source ID is actually a 16-bit value.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <0e83ba548c1aedd1299fe387b94db78986590a34.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi_ghes_record_errors() has an assert() at the beginning
to ensure that source_id will be lower than
ACPI_GHES_ERROR_SOURCE_COUNT. Remove a duplicated check.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <df33b004d85b7b9aa388fb2ac530dcdea94b7edc.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Align the header file with the actual implementation of
this function, as the first argument is source ID and not
notification type.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <d55f2a6ede5a168e42a20a228b2c066cb4c60939.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GHES has two fields that are stored on HEST error source
blocks associated with notifications:
- notification type, which is a number defined at the ACPI spec
containing several arch-specific synchronous and assynchronous
types;
- source id, which is a HW/FW defined number, used to distinguish
between different implemented sources.
There could be several sources with the same notification type,
which is dependent of the way each architecture maps notifications.
Right now, build_ghes_v2() hardcodes a 1:1 mapping between such
fields. Move it to two independent parameters, allowing the
caller function to fill both.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <133ff72ea1041fed7dbcf97b7a2b0f4dfacde31a.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The GHES driver requires not only a HEST table, but also a
separate firmware file to store Error Structure records.
It can't do one without the other.
Simplify the caller logic for it to require one function.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <9584bb8953385e165681d5d185c503f8df8ef42f.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reduce the ident of the function and prepares it for
the next changes.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <19af4188535217213486d169e0501e592bc78a95.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is just duplicating ACPI_GHES_ERROR_SOURCE_COUNT, which
has a better name. So, drop the duplication.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <9012bf4c9630adf15a22af3c88fda8270916887b.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
