Pull all the mutable fields of PL011State into a separate struct.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_irqs are not part of the vmstate, therefore they will remain in
PL011State. Update them if needed after regs_read()/regs_write().
Apply #[must_use] to functions that return whether the interrupt state
could have changed, so that it's harder to forget the call to update().
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for moving all references to the registers and the FIFO into a
separate struct.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As an added bonus, this also makes the new function return u32 instead
of u64, thus factoring some casts into a single place.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes booting a Linux kernel which is provided on the command line.
* Allow more than 4GB RAM on 64-bit boxes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5PvvgAKCRD3ErUQojoP
X7JQAQCn2MR4k4lfClDZHNmAFUNw51j56SB5HC/FCUKfOx4dCQD/Tf2OV/gstMOz
nfpvIH6ouXZ2/p5npzTyOt+A8fwUpw0=
=qrs7
-----END PGP SIGNATURE-----
Merge tag 'hppa-system-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa into staging
hppa updates
* Fixes booting a Linux kernel which is provided on the command line.
* Allow more than 4GB RAM on 64-bit boxes
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZ5PvvgAKCRD3ErUQojoP
# X7JQAQCn2MR4k4lfClDZHNmAFUNw51j56SB5HC/FCUKfOx4dCQD/Tf2OV/gstMOz
# nfpvIH6ouXZ2/p5npzTyOt+A8fwUpw0=
# =qrs7
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Jan 2025 14:53:34 EST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-system-for-v10-pull-request' of https://github.com/hdeller/qemu-hppa:
hw/hppa: Fix booting Linux kernel with initrd
hw/hppa: Support up to 256 GiB RAM on 64-bit machines
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are 2 I2C controllers, map them both, removing
the unimplemented one. Keep the OLED controller on the
first I2C bus.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-7-philmd@linaro.org
[PMM: tweak to appease maybe-use-uninitialized warning]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add definitions (DCx_periph) for the DeviceCapability bits,
replace direct bitmask checks with the DEV_CAP() macro,
which use the extract/deposit API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add definitions for the number of controllers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is nothing mapped at 0x40002000.
I2C#0 is already mapped at 0x40021000.
Remove the invalid mapping added in commits aecfbbc97a & 394c8bbfb7.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Board schematic is useful to corroborate GPIOs/IRQs wiring.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-2-philmd@linaro.org
[PMM: Use https:// URLs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes INTD and MSI interrupts poking the same IRQ line without keeping track of
each other's IRQ level. Furthermore, SoCs such as the i.MX 8M Plus don't share
the MSI IRQ with the INTx lines, so expose it as a dedicated pin.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes characters to be "echoed" after each keystroke rather than after every
other since imx_serial_rx_fifo_ageing_timer_restart() would see ~UTS1_RXEMPTY
only after every other keystroke.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The value of the UCFR register is respected when echoing characters to the
terminal, but its reset value is reserved. Fix the reset value to the one
documented in the datasheet.
While at it move the related attribute out of the section of unimplemented
registers since its value is actually respected.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When instanciating the machine model, the machine_init()
implementations usually create the CPUs, so have access
to its first CPU. Use that rather then the &first_cpu
global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Samuel Tardieu <sam@rfc1149.net>
Message-id: 20250112225614.33723-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the TYPE_ARMV7M object forward its NVIC interrupt lines,
it is somehow misleading to name it 'nvic'. Add the 'armv7m'
local variable for clarity, but also keep the 'nvic' variable
behaving like before when used for wiring IRQ lines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv7MState object is not simply a CPU, it also
contains the NVIC, SysTick timer, and various MemoryRegions.
Rename the field as 'armv7m', like other Cortex-M boards.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tacoma-bmc machine has recently been removed, so let's remove
it from the documentation now, too.
Fixes: 2b1b66e01f ("arm: Remove tacoma-bmc machine")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250124174507.27348-1-thuth@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
On the AST2400 and AST2500 platforms, the system can only be reset by enabling
the WDT (Watchdog Timer) and waiting for the WDT timeout. However, starting
from the AST2600 platform, the reset event can be triggered directly and
intentionally by software, without relying on the WDT timeout.
This mechanism, referred to as "software restart", is implemented in hardware.
When using the software restart mechanism, the WDT counter is not enabled.
To trigger a reset generation in software mode, write 0xAEEDF123 to register
0x24 and software mode reset only support SOC reset mode.
A new function, "aspeed_wdt_is_soc_reset_mode", is introduced to determine
whether the SoC reset mode is active.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250124030249.1706996-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When the -nodefaults option is set, sd devices should not be
automatically created by the machine. Instead they should be defined
on the command line.
Note that it is not currently possible to define which bus an
"sd-card" device is attached to:
-blockdev node-name=drive0,driver=file,filename=/path/to/file.img \
-device sd-card,drive=drive0,id=sd0
and the first bus named "sd-bus" will be used.
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/qemu-devel/20250122070909.1138598-10-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The main changes compared to upstream 2024.11 buildroot are
- bumped Linux to version 6.11.11 with a custom config
- changed U-Boot to OpenBMC branch for more support
- included extra target packages
See branch [1] for more details.
There is a slight output change when powering off the machine,
the console now contains :
reboot: Power off not available: System halted
Adjust accordingly the expect string in
do_test_arm_aspeed_buildroot_poweroff().
[1] https://github.com/legoater/buildroot/commits/aspeed-2024.11
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Link: https://lore.kernel.org/qemu-devel/20250122070909.1138598-9-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add Timer model for AST2700 Timer support. The Timer controller include 8 sets
of 32-bit decrement counters.
The base address of TIMER0 to TIMER7 as following.
Base Address of Timer 0 = 0x12C1_0000
Base Address of Timer 1 = 0x12C1_0040
Base Address of Timer 2 = 0x12C1_0080
Base Address of Timer 3 = 0x12C1_00C0
Base Address of Timer 4 = 0x12C1_0100
Base Address of Timer 5 = 0x12C1_0140
Base Address of Timer 6 = 0x12C1_0180
Base Address of Timer 7 = 0x12C1_01C0
The interrupt of TIMER0 to TIMER7 as following.
GICINT16 = TIMER 0 interrupt
GICINT17 = TIMER 1 interrupt
GICINT18 = TIMER 2 interrupt
GICINT19 = TIMER 3 interrupt
GICINT20 = TIMER 4 interrupt
GICINT21 = TIMER 5 interrupt
GICINT22 = TIMER 6 interrupt
GICINT23 = TIMER 7 interrupt
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20250113064455.1660564-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The timer controller include 8 sets of 32-bit decrement counters, based on
either PCLK or 1MHZ clock and the design of timer controller between AST2600
and AST2700 are almost the same.
TIMER0 – TIMER7 has their own individual control and interrupt status register.
In other words, users are able to set timer control in register TMC10 with
different TIMER base address and clear timer control and interrupt status in
register TMC14 with different TIMER base address.
Introduce new "aspeed_2700_timer_read" and "aspeed_2700_timer_write" callback
functions and a new ast2700 class to support AST2700.
The base address of TIMER0 to TIMER7 as following.
Base Address of Timer 0 = 0x12C1_0000
Base Address of Timer 1 = 0x12C1_0040
Base Address of Timer 2 = 0x12C1_0080
Base Address of Timer 3 = 0x12C1_00C0
Base Address of Timer 4 = 0x12C1_0100
Base Address of Timer 5 = 0x12C1_0140
Base Address of Timer 6 = 0x12C1_0180
Base Address of Timer 7 = 0x12C1_01C0
The register address space of each TIMER is "0x40" , and uses the following
formula to get the index and register of each TIMER.
timer_index = offset >> 6;
timer_offset = offset & 0x3f;
The TMC010 is a counter control set and interrupt status register. Write "1" to
TMC10[3:0] will set the specific bits to "1". Introduce a new
"aspeed_2700_timer_set_ctrl" function to handle this register behavior.
The TMC014 is a counter control clear and interrupt status register, to clear
the specific bits to "0", it should write "1" to TMC14[3:0] on the same bit
position. Introduce a new "aspeed_2700_timer_clear_ctrl" function to handle
this register behavior. TMC014 does not support read operation.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20250113064455.1660564-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The register set have a significant change in AST2700. The TMC00-TMC3C
are used for TIMER0 and TMC40-TMC7C are used for TIMER1. In additional,
TMC20-TMC3C and TMC60-TMC7C are reserved registers for TIMER0 and TIMER1,
respectively.
Besides, each TIMER has their own control and interrupt status register.
In other words, users are able to set control and interrupt status for TIMER0
in one register. Both aspeed_timer_read and aspeed_timer_write callback
functions are not compatible AST2700.
Introduce common read and write functions for ASPEED timers.
Modify the aspeed_timer_read and aspeed_timer_write functions to delegate to
SoC-specific callbacks first.
Update the AST2400, AST2500, AST2600 and AST1030 specific read and write
functions to call the common implementations for common register accesses.
This refactoring improves the organization of call delegation and prepares the
codebase for future SoC-specific specializations, such as the AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20250113064455.1660564-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The Write Protect pin of SDHCI model is default active low to match the SDHCI
spec. So, write enable the bit 19 should be 1 and write protected the bit 19
should be 0 at the Present State Register (0x24).
According to the design of AST2600 EVB, the Write Protected pin is active
high by default. To support it, introduces a new "sdhci_wp_inverted"
property in ASPEED MACHINE State and set it true for AST2600 EVB
and set "wp_inverted" property true of sdhci-generic model.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241114094839.4128404-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The Write Protect pin of SDHCI model is default active low to match the SDHCI
spec. So, write enable the bit 19 should be 1 and write protected the bit 19
should be 0 at the Present State Register (0x24). However, some boards are
design Write Protected pin active high. In other words, write enable the bit 19
should be 0 and write protected the bit 19 should be 1 at the
Present State Register (0x24). To support it, introduces a new "wp-inverted"
property and set it false by default.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241114094839.4128404-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In the loop, we need ignore the index increase when uart == uart_chosen
We should increase the index only after we allocate a serial.
Signed-off-by: Kenneth Jia <kenneth_jia@asus.com>
Fixes: d2b3eaefb4 ("aspeed: Refactor UART init for multi-SoC machines")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/5f9b0c53f1644922ba85522046e92f4c@asus.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Commit 20f7b89017 ("hw/hppa: Reset vCPUs calling resettable_reset()")
broke booting the Linux kernel with initrd which may have been provided
on the command line. The problem is, that the mentioned commit zeroes
out initial registers which were preset with addresses for the Linux
kernel and initrd.
Fix it by adding proper variables which are set shortly before starting
the firmware.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 20f7b89017 ("hw/hppa: Reset vCPUs calling resettable_reset()")
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Allow up to 256 GB RAM, which is the maximum a rp8440 machine (the very
last 64-bit PA-RISC machine) physically supports.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ5M4AwAKCRAfewwSUazn
0aJAAP45/9qfbGSYiMCrBXpRFlyvtRN+GEXHEsERfk9Q1V+tQgEA/mMiUEcyc/xc
Z1Z27cDoqUFRhPmxbd6/KyTGHzo2+As=
=Zanw
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20250124' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ5M4AwAKCRAfewwSUazn
# 0aJAAP45/9qfbGSYiMCrBXpRFlyvtRN+GEXHEsERfk9Q1V+tQgEA/mMiUEcyc/xc
# Z1Z27cDoqUFRhPmxbd6/KyTGHzo2+As=
# =Zanw
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Jan 2025 01:49:39 EST
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250124' of https://gitlab.com/bibo-mao/qemu:
target/loongarch: Dump all generic CSR registers
target/loongarch: Set unused flag with CSR registers
target/loongarch: Add common source file for CSR register
target/loongarch: Add common header file for CSR registers
target/loongarch: Add generic csr function type
target/loongarch: Remove static CSR function setting
target/loongarch: Add dynamic function access with CSR register
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes the following qemu warnings when building debian gupnp package:
Unknown host QEMU_IFLA type: 61
Unknown host QEMU_IFLA type: 58
Unknown host QEMU_IFLA type: 59
Unknown host QEMU_IFLA type: 60
Unknown host QEMU_IFLA type: 32820
QEMU_IFLA type 32820 is actually NLA_NESTED | QEMU_IFLA_PROP_LIST (a nested
entry), which is why rta_type needs to be masked with NLA_TYPE_MASK.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Fixes various warnings in the testsuite while building gupnp:
gssdp-net-DEBUG: Failed to send netlink message: Operation not supported
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (192.168.1.2, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host IP (fe80::01, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Failed to parse HOST header from request: Invalid IPv6 address ?[fe80::01%1]? in URI
gupnp-context-DEBUG: Failed to parse HOST header from request: Invalid IPv6 address ?[fe80::01%eth0]? in URI
gupnp-context-DEBUG: Failed to parse HOST header from request: Could not parse port ?:1? in URI
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Add IP_MULTICAST_IF and share the code with IP_ADD_MEMBERSHIP / IP_DROP_MEMBERSHIP.
Sharing the code makes sense, because the manpage of ip(7) says:
IP_MULTICAST_IF (since Linux 1.2)
Set the local device for a multicast socket. The argument
for setsockopt(2) is an ip_mreqn or (since Linux 3.5)
ip_mreq structure similar to IP_ADD_MEMBERSHIP, or an
in_addr structure. (The kernel determines which structure
is being passed based on the size passed in optlen.) For
getsockopt(2), the argument is an in_addr structure.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Avoid using the same error message for two different code paths
as it complicates determining the one which actually triggered.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Fix this warning:
Unknown host IFA type: 11
While adding IFA_PROTO, convert all IFA_XXX values over to QEMU_IFA_XXX values
to avoid a build failure on Ubuntu 22.04 (kernel v5.18 which does not know
IFA_PROTO yet).
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
On LA464, some CSR registers are not used such as CSR_SAVE8 -
CSR_SAVE15, also CSR registers relative with MCE is not used now.
Flag CSRFL_UNUSED is added for these registers, so that it will
not dumped. In order to keep compatiblity, these CSR registers are
not removed since it is used in vmstate already.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Common source file csr.c is added here, it can be used by both
TCG mode and kvm mode. The common code is removed from file
tcg/insn_trans/trans_privileged.c.inc to csrc.c
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Parameter type TCGv and TCGv_ptr for function GenCSRRead and GenCSRWrite
is not used in non-TCG mode. Generic csr function type is added here
with parameter void type, so that it passes to compile with non-TCG mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
With CSR register, dynamic function access is used for CSR register
access in TCG mode, so that csr info can be used by other modules.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
The only public interfaces for pl011 are TYPE_PL011 and pl011_create.
Remove pub from everything else.
Note: the "allow(dead_code)" is removed later.
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not use new_unchecked; the effect is the same, but the
code is easier to read and unsafe regions become smaller.
Likewise, NonNull::new can be used instead of assertion and
followed by as_ref() or as_mut() instead of dereferencing the
pointer.
Suggested-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
