The SDCardClass has an 'enable' method, but nothing actually invokes it.
The underlying implementation is sd_enable(), which is documented
in sdcard_legacy.h as something that should not be used and was only
present for the benefit of the now-removed nseries boards. Unlike
all the other method pointers in SDCardClass, this one doesn't have
an sdbus_foo() function wrapper in hw/sd/core.c.
Remove the unused method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-10-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is a very old source file, and still has some lingering
hard-coded tabs; untabify it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-9-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The coverswitch qemu_irq is never connected to anything, and the only thing
we do with it is set it in omap_mmc_reset(). Remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-8-peter.maydell@linaro.org>
[PMD: Remove unused 'coverswitch' field]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Our style for other conversions of OMAP devices to qdev has been to
inline the creation and wiring into omap310_mpu_init() -- see for
instance the handling of omap-intc, omap-gpio and omap_i2c. Do
the same for omap-mmc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-7-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The approach we've settled on for handling the omap_clk wiring for
OMAP devices converted to QDev is to have a function omap_foo_set_clk()
whose implementation just sets the field directly in the device's
state struct. (See the "TODO" comment near the top of omap.h.)
Make omap_mmc do the same.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-6-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the OMAP MMC controller to the new SDBus API:
* the controller creates an SDBus bus
* instead of sd_foo functions on the SDState object, call
sdbus_foo functions on the SDBus
* the board code creates a proper TYPE_SD_CARD object and attaches
it to the controller's SDBus, instead of the controller creating
a card directly via sd_init() that never gets attached to any bus
* because the SD card object is on a bus, it gets reset automatically
by the "traverse the qbus tree resetting things" code, and we don't
need to manually reset the card from the controller reset function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-5-peter.maydell@linaro.org>
[PMD: Include "hw/sd/sd.h" instead of "hw/sd/sdcard_legacy.h",
create bus in omap_mmc_initfn() instead of omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The omap_mmc device has three outbound qemu_irq lines:
* one actual interrupt line
* two which connect to the DMA controller and are signalled for
TX and RX DMA
Convert these to a sysbus IRQ and two named GPIO outputs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-4-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Mechanically convert the remaining uses of 'struct omap_mmc_s' to
'OMAPMMCState'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Do a minimal conversion of the omap_mmc device model to QDev.
In this commit we do the bare minimum to produce a working device:
* add the SysBusDevice parent_obj and the usual type boilerplate
* omap_mmc_init() now returns a DeviceState*
* reset is handled by sysbus reset, so the SoC reset function
doesn't need to call omap_mmc_reset() any more
* code that should obviously be in init/realize is moved there
from omap_mmc_init()
We leave various pieces of cleanup to later commits:
* rationalizing 'struct omap_mmc_s *' to 'OMAPMMCState *'
* using gpio lines rather than having omap_mmc_init() directly
set s->irq, s->dma
* switching away from the legacy SD API and instead having
the SD card plugged into a bus
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-2-peter.maydell@linaro.org>
[PMD: Do not add omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
TARGET_BIG_ENDIAN -> TARGET_BIG_ENDIAN ? ELFDATA2MSB : ELFDATA2LSB
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-7-philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
Note, this allow removing the target_words_bigendian() call
in the GENERIC_LOADER device, where we pass ELFDATANONE.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-6-philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-5-philmd@linaro.org>
Last use of load_elf_ram() was removed in commit 188e255bf8
("hw/s390x: Remove the possibility to load the s390-netboot.img
binary"), remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20250127113824.50177-3-philmd@linaro.org>
load_elf_ram_sym() with load_rom=true, sym_cb=NULL is
equivalent to load_elf_as(). Replace by the latter to
simplify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-2-philmd@linaro.org>
The variable is uint64_t so needs %PRIu64 instead of %d.
Fixes: 3ae7eb88c4 ("ehci: fix overflow in frame timer code")
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250124124713.64F8C4E6031@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This has been useful when debugging and unsure if the guest is
generating i2c traffic.
Signed-off-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250121105935.3069035-1-titusr@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There are a fixed number of PCI IRQs, known beforehand.
Allocate them within PCIMultiSerialState, and initialize
using qemu_init_irq(), allowing to remove the legacy
qemu_allocate_irqs() and qemu_free_irqs() calls.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121182828.45088-1-philmd@linaro.org>
The FPGA exposes a fixed set of IRQs. Hold them in the FPGA
state and initialize them in place calling qemu_init_irqs().
Move r2d_fpga_irq enums earlier so we can use NR_IRQS within
the r2d_fpga_t structure. r2d_fpga_init() returns r2d_fpga_t,
and we dereference irq from it in r2d_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121182445.35309-1-philmd@linaro.org>
No need to dynamically allocate IRQ when we know before hands
how many we'll use. Declare the 2 of them in IPackDevice state
and initialize them in the DeviceRealize handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121155526.29982-4-philmd@linaro.org>
Split IPACK Kconfig key as {IPACK, TPCI200, IP_OCTAL_232}
- IPack is a bus
- TPCI200 is a PCI device providing an IPack bus
- IP-Octal232 is an IPack device plugged on an IPack bus
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20250121155526.29982-3-philmd@linaro.org>
While qemu_init_irq() initialize a single IRQ,
qemu_init_irqs() initialize an array of them.
Suggested-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121155526.29982-2-philmd@linaro.org>
loongson3_bootp.c doesn't contain any target-specific code
and can be build generically, move it to common_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-12-philmd@linaro.org>
Propagate %processor_id from mips_loongson3_virt_init() where
we have a reference to the first vCPU, so use it instead of
the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-11-philmd@linaro.org>
Remove one &first_cpu use in hw/mips/loongson3_bootp.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-10-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-9-philmd@linaro.org>
Remove one use of the 'current_machine' global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-8-philmd@linaro.org>
Propagate the %cpu_count from the machine file, allowing
to remove the "hw/boards.h" dependency (which is machine
specific) from loongson3_bootp.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-7-philmd@linaro.org>
MemMapEntry is declared in "exec/hwaddr.h", cpu_to_le32() in
"qemu/bswap.h". These headers are indirectly included via "cpu.h".
Include them explicitly in order to avoid when removing "cpu.h":
In file included from ../../hw/mips/loongson3_bootp.c:27:
hw/mips/loongson3_bootp.h:234:14: error: unknown type name 'MemMapEntry'
234 | extern const MemMapEntry virt_memmap[];
| ^
hw/mips/loongson3_bootp.c:33:18: error: call to undeclared function 'cpu_to_le32'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
33 | c->cputype = cpu_to_le32(Loongson_3A);
| ^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-6-philmd@linaro.org>
Pass the first vCPU as argument, allowing to remove
another &first_cpu global use.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-5-philmd@linaro.org>
'loaderparams' is declared statically. Let fw_conf_init()
access its 'cpu_freq' and 'ram_size' fields.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-4-philmd@linaro.org>
Create vCPUs from the last one to the first one.
No need to use the &first_cpu global since we already
have it referenced.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250115232952.31166-3-philmd@linaro.org>
main_cpu_reset() is misleadingly named "main": it resets
all vCPUs, with a special case for the first vCPU.
Factor generic_cpu_reset() out of main_cpu_reset(),
allowing to remove one &first_cpu use.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250115232952.31166-2-philmd@linaro.org>
rx_gdbsim_init() has access to the single CPU via:
RxGdbSimMachineState {
RX62NState {
RXCPU cpu;
...
} mcu;
} s;
Directly use that instead of the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250110180442.82687-1-philmd@linaro.org>
This is SeaBIOS for the hppa architecture v18.
It allows us to emulate up to 256 GB RAM on 64-bit
guests and to boot HP-UX 64-bit one step further.
Fixes:
- Fix PDC_CACHE/PDC_CACHE_RET_SPID return value for space
register hashing on 64-bit HP-UX
- Fix IRT table entries to use slot number
- Increase PCI alignment for memory bars to 64k
New PDC functions & general enhancements:
- Allow up to 256 GB RAM on 64-bit machines
Signed-off-by: Helge Deller <deller@gmx.de>
The Linux kernel turns space-register hashing off unconditionally at
bootup. That code was provided by HP at the beginning of the PA-RISC
Linux porting effort, and I don't know why it was decided then why Linux
should not use space register hashing.
32-bit HP-UX versions seem to not use space register hashing either.
But for 64-bit HP-UX versions, Sven Schnelle noticed that space register
hashing needs to be enabled and is required, otherwise the HP-UX kernel
will crash badly.
On 64-bit CPUs space register hashing is controlled by a bit in diagnose
register %dr2. Since we want to support Linux and 32- and 64-bit HP-UX,
we need to fully emulate the diagnose registers and handle specifically
the bit in %dr2.
This patch adds the code to calculate the gva memory mask based on the
space-register hashing bit in %dr2 and the PSW_W (64-bit) flag.
The value is cached in the gva_offset_mask variable in CPUArchState
and recalculated at every modification of the CPU PSW or %dr2.
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: Sven Schnelle <svens@stackframe.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This error was discovered by fuzzing qemu-img.
When ph.ext_off has a sufficiently large value, the operation
le64_to_cpu(ph.ext_off) << BDRV_SECTOR_BITS in
parallels_read_format_extension() can cause an overflow in int64_t.
This overflow triggers the assert(ext_off > 0)
check in block/parallels-ext.c: parallels_read_format_extension(),
leading to a crash.
This commit adds a check to prevent overflow when shifting ph.ext_off
by BDRV_SECTOR_BITS, ensuring that the value remains within a valid range.
Reported-by: Leonid Reviakin <L.reviakin@fobos-nt.ru>
Signed-off-by: Denis Rastyogin <gerben@altlinux.org>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-ID: <20241212104212.513947-2-gerben@altlinux.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Fix the broken aarch64_tcg_plugins test
* Add test for 64-bit mac99 machine
* Add a Linux-based test for the 40p machine
* Fix issues with record/replay of some s390x instructions
* Fix node.js crashes on emulated s390x due to a bug in the MVC instruction
* Enable virtio-balloon-pci and virtio-mem-pci on s390x
* Fix a libslirp v4.9.0 compilation problem
-----BEGIN PGP SIGNATURE-----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=rEzl
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2025-01-30' of https://gitlab.com/thuth/qemu into staging
* Convert more avocado tests to the functional framework
* Fix the broken aarch64_tcg_plugins test
* Add test for 64-bit mac99 machine
* Add a Linux-based test for the 40p machine
* Fix issues with record/replay of some s390x instructions
* Fix node.js crashes on emulated s390x due to a bug in the MVC instruction
* Enable virtio-balloon-pci and virtio-mem-pci on s390x
* Fix a libslirp v4.9.0 compilation problem
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmebewIRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbUfZQ//WHrZNVQNe0d+wOtAa5Zj4X9RpadHeGO9
# WCKtBWZ1tDADHiVkZzU6L6q/LYM5FcAOE+Kah/xr8rtf6he+LCYQ0RDHbgY6/oUE
# t9TkIeph59+MMvBXWJ8flngaoVtxe8l2aYem8wk3ATPZtHyMQAZ5PAjY3+WYQAGc
# gm13k1AMD4mA6mBUOs67QSitTqBQsunKpb1IvpyBjtv9NBl61L8h5hWn0bsxa8yC
# 3KKZhw6Nclc8RVe33e6ZDrHrBi9klORd6Z+7fJ4w8Yj+C48ogfbQx+Zvb82jXhRe
# 2qGdVb6cF7LVQ5D3pECBK7yo4Lkd7MYnNvn+EmbTXhj1y5MSPdokP6k0ZWkhhkCP
# 2kIY0o5tFipdxkdDpCptU3gYJLdQFbNX2MqDFY0KeurLDGe4o6jIoRNmdZ67TJei
# zleLlcEatoyRqpCKqTNMDVeWgza3ngykhiQIrG9PMPCRQET0N4qY6db35hzDujLI
# NVuI1traCLawfCDYiMnU59dOxWSHy1bwSfnUxhZ92+Fl3AOb6c6PzhpkIGl/grwT
# 8T8EcjFyA4hpaHHKjCeNgSrKt9N0Ka2G3l9oF8eWwJm4KAlwtYBDvfVb+juGBP9+
# 8gW0lXA8tYy/P5XgPQ0N5Z8coc1xUrYBhC7v70ud3ponMmmTdhRnosey2cOFUGsN
# /U7avgXIm0Q=
# =rEzl
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Jan 2025 08:13:38 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2025-01-30' of https://gitlab.com/thuth/qemu:
net/slirp: libslirp 4.9.0 compatibility
tests/functional/test_mips_malta: Convert the mips big endian replay tests
tests/functional/test_mips64el_malta: Convert the mips64el replay tests
tests/functional/test_mipsel_malta: Convert the mipsel replay tests
tests/functional: Add the ReplayKernelBase class
tests/functional: Add a decorator for skipping long running tests
tests/functional: Extend PPC 40p test with Linux boot
s390x/s390-virtio-ccw: Support plugging PCI-based virtio memory devices
virtio-mem-pci: Allow setting nvectors, so we can use MSI-X
virtio-balloon-pci: Allow setting nvectors, so we can use MSI-X
hw/s390x/s390-virtio-ccw: Fix a record/replay deadlock
tests/tcg/s390x: Test modifying code using the MVC instruction
target/s390x: Fix MVC not always invalidating translation blocks
target/s390x: Fix PPNO execution with icount
tests/functional/test_mips_malta: Fix comment about endianness of the test
tests/functional: Add a ppc64 mac99 test
tests/functional: Fix the aarch64_tcg_plugins test
tests/functional: Convert the migration avocado test
tests/functional: Fix broken decorators with lamda functions
tests/functional/qemu_test/decorators: Fix bad check for imports
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Purge of ram_save_target_page_legacy
- Cleanups to postcopy, json writer, migration states
- New migration mode cpr-transfer
- Fix for a -Werror=maybe-uninitialized instance in savevm
-----BEGIN PGP SIGNATURE-----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=jwOI
-----END PGP SIGNATURE-----
Merge tag 'migration-20250129-pull-request' of https://gitlab.com/farosas/qemu into staging
Migration pull request
- Purge of ram_save_target_page_legacy
- Cleanups to postcopy, json writer, migration states
- New migration mode cpr-transfer
- Fix for a -Werror=maybe-uninitialized instance in savevm
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmeaT8EQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxndXrEACTT+rdoEvOsNs4nM2a67GjxUoQZVTAWn+8
# lYhhNZLA4E+qHwpHTDCwyfyvCe615r72+bF7QO1KTrYeXGJg4SPk5kbEhCDqqjEu
# SGqrlPwkC1x3WkTvb228iDddDQ8dccko3Sy6wAyz0o8dtp5p4iK+57qzB/84u94L
# y3zQ+owOo9OLnXgdfMpN99HGQSvPR7CbP/2L293IrMCuPDUo9XhI7ARNS/phbT3Z
# aDl10WGHKz1SJWOkPj137E6+xMKuCmOZDTufTcTaHfyliD04JRWgEZVnKJxKJDxd
# 9e+lzHvXuYfO7YO11fr7DttPRnLEfjipELVTxrudM92eZ95XwdL4+ggfBTGHt76P
# yFUrp7G8qsUjWd+DHPmoo6Gx71zPbE6v9J2NMn2/1k4WdPOYy7HTmDgCkRirRTvV
# irYkHtdSFFsj3c0g4P4mhOzXnvUkGXzgrjteM5hlLy3bjSeZz9VMZADjiGqFGVPb
# 6euPcLLa9oynkoP5UXmFd/9PjWcgnfIbQu2MVlIyWhjvTGZKSGecVZmH5pWTJuBV
# xCbab1jYprRFpUIAMo94rgvRQRosomS1+GjGndFkX5++dTTlFSqpDLSGcEnPSGRx
# o9n+IldNiqh2vjN1bj60pLfmrHN/F+hsGTsDJlW+kfeyBXBkGArg1rDjN5ae7GvD
# UZK0N+OG0g==
# =jwOI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 29 Jan 2025 10:56:49 EST
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'migration-20250129-pull-request' of https://gitlab.com/farosas/qemu: (42 commits)
migration: refactor ram_save_target_page functions
migration: Trivial cleanup on JSON writer of vmstate_save()
migration: Merge precopy/postcopy on switchover start
migration: Always set DEVICE state
migration: Cleanup qemu_savevm_state_complete_precopy()
migration: Unwrap qemu_savevm_state_complete_precopy() in postcopy
migration: Notify COMPLETE once for postcopy
migration: Take BQL slightly longer in postcopy_start()
migration: Drop cached migration state in migration_maybe_pause()
migration: Adjust locking in migration_maybe_pause()
migration: Adjust postcopy bandwidth during switchover
migration: Synchronize all CPU states only for non-iterable dump
migration: Drop inactivate_disk param in qemu_savevm_state_complete*
migration: Avoid two src-downtime-end tracepoints for postcopy
migration: Optimize postcopy on downtime by avoiding JSON writer
migration: Do not construct JSON description if suppressed
migration: Remove postcopy implications in should_send_vmdesc()
migration: cpr-transfer documentation
migration-test: cpr-transfer
tests/qtest: assert qmp connected
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Update the code in net/slirp.c to be compatible with
libslirp 4.9.0, which deprecated slirp_pollfds_fill()
and started using slirp_os_socket type for sockets
(which is a 64-bit integer on win64) for all callbacks
starting with version 6 of the interface.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-ID: <20250130123253.864681-1-mjt@tls.msk.ru>
[thuth: Added some spaces to make checkpatch.pl happy]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Turn on space register hashing for 64-bit CPUs when reset.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add 32- and 64-bit instruction decoding of the mfdiag and mtdiag
instructions which modify the diagnose registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
diag_getshadowregs_pa2() and diag_putshadowregs_pa2() were added in
commit 3bdf20819e based on some analysis of ODE code, but now they
conflict with the generic mfdiag/mtdiag instructions. I believe the
former analysis was wrong, so remove them again. Note that all diag
instructions are badly documented, so most things are based on reverse
engineering and thus may be wrong.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 3bdf20819e ("target/hppa: Add diag instructions to set/restore shadow registers")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add the diagnose registers (%dr) to the CPUArchState. Those are mostly
undocumented and control cache behaviour, memory behaviour, reset button
management and many other related internal CPU things.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The various PA-RISC CPUs implement different CPU-specific diag
instructions (mfdiag, mtdiag, mfcpu, mtcpu, ...) to access CPU-internal
diagnose/configuration registers, e.g. for cache control, managing space
register hashing, control front panel LEDs and read status of the
hardware reset button.
Those instructions are mostly undocumented, but are used by ODE, HP-UX
and Linux.
This patch adds some neccessary instructions for PCXL and PCXU CPUs.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The hppa_hardware.h header file holds many constants for addresses and
offsets which are needed while building the firmware (SeaBIOS-hppa) and
while setting up the virtual machine in QEMU.
This patch brings it in sync between both source code repositories.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Since I contribute quite some code to hppa, I'd like to step up and
become the secondary maintainer for HPPA beside Richard.
Additionally change status of hppa machines to maintained as I will
take care of them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We removed the implementations in commit 46a2bd5257
("hw/i386/pc: Remove deprecated pc-i440fx-2.3 machine")
but forgot to remove the declarations. Do it now.
Fixes: 46a2bd5257 ("hw/i386/pc: Remove deprecated pc-i440fx-2.3 machine")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Per [*]:
"we're only interested in adopting SPDX for recording the
licensing info, [not] any other SPDX metadata."
Replace the 'SPDX-FileCopyrightText' and 'SPDX-FileContributor'
tags added by Linaro by 'Copyright (c)' and 'Authors' words
respectively.
[*] https://lore.kernel.org/qemu-devel/20241007154548.1144961-4-berrange@redhat.com/
Inspired-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
