Currently we handle CNTV_TVAL_EL02 by calling gt_tval_read() for the
EL1 virt timer. This is almost correct, but the underlying
CNTV_TVAL_EL0 register behaves slightly differently. CNTV_TVAL_EL02
always applies the CNTVOFF_EL2 offset; CNTV_TVAL_EL0 doesn't do so if
we're at EL2 and HCR_EL2.E2H is 1.
We were getting this wrong, because we ended up in
gt_virt_cnt_offset() and did the E2H check.
Factor out the tval read/write calculation from the selection of the
offset, so that we can special case gt_virt_tval_read() and
gt_virt_tval_write() to unconditionally pass CNTVOFF_EL2.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20250204125009.2281315-5-peter.maydell@linaro.org
When we added Secure EL2 support, we missed that this needs an update
to the access code for the EL3 physical timer registers. These are
supposed to UNDEF from Secure EL1 when Secure EL2 is enabled.
(Note for stable backporting: for backports to branches where
CP_ACCESS_UNDEFINED is not defined, the old name to use instead
is CP_ACCESS_TRAP_UNCATEGORIZED.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20250204125009.2281315-4-peter.maydell@linaro.org
The CNTVOFF_EL2 offset register should only be applied for accessses
to CNTVCT_EL0 and for the EL1 virtual timer (CNTV_*). We were
incorrectly applying it for the EL2 virtual timer (CNTHV_*).
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20250204125009.2281315-3-peter.maydell@linaro.org
When we are calculating timer deadlines, the correct definition of
whether or not to apply an offset to the physical count is described
in the Arm ARM DDI4087 rev L.a section D12.2.4.1. This is different
from when the offset should be applied for a direct read of the
counter sysreg.
We got this right for the EL1 physical timer and for the EL1 virtual
timer, but got all the rest wrong: they should be using a zero offset
always.
Factor the offset calculation out into a function that has a comment
documenting exactly which offset it is calculating and which gets the
HYP, SEC, and HYPVIRT cases right.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20250204125009.2281315-2-peter.maydell@linaro.org
The kernel that is used in the sx1 test prints the usual Linux log
onto the serial console, but this test currently ignores it. To
make sure that the serial device is working properly, let's check
for some strings in the output here.
While we're at it, also add the test to the corresponding section
in the MAINTAINERS file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250226104833.1176253-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The reg isn't validated to be a possible register before
it's dereferenced for one case. The mmio space registered
for the gpio device is 4KiB but there aren't that many
registers in the struct.
Cc: qemu-stable@nongnu.org
Fixes: 526dbbe087 ("hw/gpio: Add GPIO model for Nuvoton NPCM7xx")
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250226024603.493148-1-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SMMUTransCfg->ttb is never used in QEMU, TT base address
can be accessed by SMMUTransCfg->tt[i]->ttb.
Signed-off-by: JianChunfu <jansef.jian@hj-micro.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20250221031034.69822-1-jansef.jian@hj-micro.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Specifying this bit in the guest CLP response indicates that the guest
can optionally choose to skip translation and instead use
identity-mapped operations.
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20250226210013.238349-3-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When receiving a guest mpcifc(4) or mpcifc(6) instruction without the T
bit set, treat this as a request to perform direct mapping instead of
address translation. In order to facilitate this, pin the entirety of
guest memory into the host iommu.
Pinning for the direct mapping case is handled via vfio and its memory
listener. Additionally, ram discard settings are inherited from vfio:
coordinated discards (e.g. virtio-mem) are allowed while uncoordinated
discards (e.g. virtio-balloon) are disabled.
Subsequent guest DMA operations are all expected to be of the format
guest_phys+sdma, allowing them to be used as lookup into the host
iommu table.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20250226210013.238349-2-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add an entry for docs/devel/testing/functional.rst to get notified
on patches that change this file.
Message-ID: <20250306105124.702131-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Seems 'Asset' got missed in the documentation by mistake.
Also fix the one spellcheck issue pointed by spellcheck
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250306060706.1982992-1-adityag@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtio_balloon test is currently hanging for unknown reasons
when being run on the shared gitlab CI runners (which don't provide
KVM, thus it's running in TCG mode there). All other functional tests
that use the same asset (the Fedora 31 kernel) have already been
marked to work only with KVM in the past, so those other tests are
skipped on the shared gitlab CI runners. As long as the problem isn't
fully understood and fixed, let's do the same with the virtio_balloon
test to avoid that the CI is failing here.
Message-ID: <20250307063904.1081961-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There are two race conditions in the recently added virtio balloon
test
* The /dev/vda device node is not ready
* The virtio-balloon driver has not issued the first stats refresh
To fix the former, monitor dmesg for a line about 'vda'.
To fix the latter, retry the stats query until seeing fresh data.
Adding 'quiet' to the kernel command line reduces serial output
which otherwise slows boot, making it less likely to hit the former
race too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250304183340.3749797-1-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[thuth: Break long line to avoid checkpatch error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
We run the gitlab-CI with the untrusted tests enabled, and
the test_replay_mips64el_malta_5KEc_cpio subtest is rather slow,
so this already hit the standard 90 seconds timeout in the CI.
Increase the timeout for more headroom.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20250305074353.52552-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The kernel has a driver for the pcnet NIC included, and the initrd has
a "tftp" command, so we can test a simple network transfer here, too.
Message-ID: <20250227103915.19795-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are going to use this code in other tests, too, so let's move it
to the qemu_test module to be able to re-use it more easily.
Message-ID: <20250227103915.19795-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The zstd command will print incremental decompression progress to stderr
when running. Fortunately it is not on stdout as that would confuse the
TAP parsing, but we should still not have this printed. By switching
from 'check_call' to 'run' with the check=True and capture_output=True
we'll get the desired silence on success, and on failure the raised
exception will automatically include stdout/stderr data for diagnosis
purposes.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250228102738.3064045-8-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250228102738.3064045-7-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the QEMU binary was built for a 32-bit ELF target we cannot run the
memory address space tests as they all require ability to address more
RAM that can be represented on 32-bit.
We can't use a decorator to skip the tests as we need setUp() to run to
pick the QEMU binary, thus we must call a method at the start of each
test to check and skip it. The functional result is effectively the
same as using a decorator, just less pretty. This code will go away when
32-bit hosts are full dropped from QEMU.
The code allows any non-ELF target since all macOS versions supported
at 64-bit only and we already dropped support for 32-bit Windows.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250228102738.3064045-6-berrange@redhat.com>
[thuth: Add missing byteorder='little' to from_bytes()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
For LoongArch th min tlb_ps is 12(4KB), for TLB code,
the tlb_ps may be 0,this may case UndefinedBehavior
Add a check-tlb_ps fuction to check tlb_ps,
to make sure the tlb_ps is avalablie. we check tlb_ps
when get the tlb_ps from tlb->misc or CSR bits.
1. cpu reset
set CSR_PWCL.PTBASE and CSR_STLBPS.PS bits a default value
from CSR_PRCFG2;
2. tlb instructions.
some tlb instructions get the tlb_ps from tlb->misc but the
value may has been initialized to 0. we need just check the tlb_ps
skip the function and write a guest log.
3. csrwr instructions.
to make sure CSR_PWCL.PTBASE and CSR_STLBPS.PS bits are avalable,
cheke theses bits and set a default value from CSR_PRCFG2.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20250305063311.830674-3-gaosong@loongson.cn>
some tlb instructions get the tlb_ps from tlb->misc but the
value may has been initialized to 0,just check the tlb_ps skip
the function and write a log.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20250305063311.830674-2-gaosong@loongson.cn>
- Merge "qemu/clang-tsa.h" within "qemu/compiler.h"
- Various cleanups around accelerators initialization code
(better user/system split)
- Various trivial cleanups in accel/tcg/,
Guard few TCG calls with tcg_enabled()
- Explicit disassemble_info endianness
- Improve dual-endianness support for MicroBlaze
-----BEGIN PGP SIGNATURE-----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=3TRh
-----END PGP SIGNATURE-----
Merge tag 'accel-cpus-20250306' of https://github.com/philmd/qemu into staging
Generic CPUs / accelerators patch queue
- Merge "qemu/clang-tsa.h" within "qemu/compiler.h"
- Various cleanups around accelerators initialization code
(better user/system split)
- Various trivial cleanups in accel/tcg/,
Guard few TCG calls with tcg_enabled()
- Explicit disassemble_info endianness
- Improve dual-endianness support for MicroBlaze
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmfJw08ACgkQ4+MsLN6t
# wN70whAAtfcdWtqseFfb6fvDtjflgxN51Ui0iaOECXUA18USKriGy34eBcMYMiM2
# +eKgU7+jI6JGE4+burcgWUsPpFFF951/A8+lyIbFgO5yToTDmC+qNe4XfmMAIyXq
# uf9Obr2c0Xk9luh4odb+jPAQodw/7G1fKgcCVIJNDCl/xEcPhS9eNpTaHwcVnkWI
# K6KrxWXOsqG6+evJBPWYoXtOOyt0+JcwAsJoGhprwtGm3P9+jSVXsgeGsJVyZcna
# f32JtjWL754O8XeMkOn4x6rt58VrCIMKI9xT7keDyuhTCq0Zki9RO2nMU2dSw5mN
# AfL9hxqUy0Nijnyslg3ugujDfTePsNyLdwwH7n0mnoD72ELi6WnhDsmOThuEB3Rd
# 4/kdwTJfA/rlWk/GF1tbKW7AvQZokRARtzmL3V0HmGJu57lX+2JuszEdYBkqDEP7
# GH1I10B2yANUm+C9y3X8qWOU7Ws433ebJeJoZuyfnbZ9Me+UfRmql/oS+V8ata2i
# fArEItpldUFrWRyYLkTbXrh2dgyV9yJTEir/lzOzeAZZzyabTbjf2z9qnh976GGO
# 1QnDy5QA4f54kDBUZe7JK26TZsHPch7cgqXW6f8tRlJF7A9hxGK8d2TUV/lC3/vx
# LUOlWNu03PhiruYmZEcWOsY3Jt9jRCF6lIryrnaJsqnVOVmMUMM=
# =3TRh
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Mar 2025 23:46:23 HKT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'accel-cpus-20250306' of https://github.com/philmd/qemu: (54 commits)
include: Poison TARGET_PHYS_ADDR_SPACE_BITS definition
system: Open-code qemu_init_arch_modules() using target_name()
target/i386: Mark WHPX APIC region as little-endian
target/alpha: Do not mix exception flags and FPCR bits
target/riscv: Convert misa_mxl_max using GLib macros
target/riscv: Declare RISCVCPUClass::misa_mxl_max as RISCVMXL
target/xtensa: Finalize config in xtensa_register_core()
target/sparc: Constify SPARCCPUClass::cpu_def
target/i386: Constify X86CPUModel uses
disas: Remove target_words_bigendian() call in initialize_debug_target()
target/xtensa: Set disassemble_info::endian value in disas_set_info()
target/sh4: Set disassemble_info::endian value in disas_set_info()
target/riscv: Set disassemble_info::endian value in disas_set_info()
target/ppc: Set disassemble_info::endian value in disas_set_info()
target/mips: Set disassemble_info::endian value in disas_set_info()
target/microblaze: Set disassemble_info::endian value in disas_set_info
target/arm: Set disassemble_info::endian value in disas_set_info()
target: Set disassemble_info::endian value for big-endian targets
target: Set disassemble_info::endian value for little-endian targets
target/mips: Fix possible MSA int overflow
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- Several iotest fixes
- Refactor QMP for NbdServerOptions for less repetition
- Avoid a hang in 'qemu-nbd --fork' when simple trace backend is enabled
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmfI2I0ACgkQp6FrSiUn
Q2pMWQf/ZNnuLC5O5W4Yiyki7mYjN3Izve5+xgM/gNv9uTrHmYXogYzswpYz1USo
aU1i/EFLJ5K7ImefQYBvySox+opwFs63xPscI/liwrKu54csp1rYGNg3hjKYaZCc
ukR5tB4bRQ2/JXNo0JueiocMZLyC5fZRUt9Z423D3ReHCtEJof0v1rTL2r7mzGJg
EdaRSGr0s592rFjWLwwvWWun5f0mEAFXM2YvZRRLE7M+x2XJeAR4F400GfvSMDNo
chGX41QKhmCYTMI5Shc/mX+5hMllEt/TyYBJUUk0cslJriVnNDV5VTFf184BmH5s
tqiUtzJubxt8/Wtpg6OV9RPAzVmr1g==
=NO+l
-----END PGP SIGNATURE-----
Merge tag 'pull-nbd-2025-03-05' of https://repo.or.cz/qemu/ericb into staging
NBD patches for 2025-03-05
- Several iotest fixes
- Refactor QMP for NbdServerOptions for less repetition
- Avoid a hang in 'qemu-nbd --fork' when simple trace backend is enabled
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmfI2I0ACgkQp6FrSiUn
# Q2pMWQf/ZNnuLC5O5W4Yiyki7mYjN3Izve5+xgM/gNv9uTrHmYXogYzswpYz1USo
# aU1i/EFLJ5K7ImefQYBvySox+opwFs63xPscI/liwrKu54csp1rYGNg3hjKYaZCc
# ukR5tB4bRQ2/JXNo0JueiocMZLyC5fZRUt9Z423D3ReHCtEJof0v1rTL2r7mzGJg
# EdaRSGr0s592rFjWLwwvWWun5f0mEAFXM2YvZRRLE7M+x2XJeAR4F400GfvSMDNo
# chGX41QKhmCYTMI5Shc/mX+5hMllEt/TyYBJUUk0cslJriVnNDV5VTFf184BmH5s
# tqiUtzJubxt8/Wtpg6OV9RPAzVmr1g==
# =NO+l
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 06 Mar 2025 07:04:45 HKT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* tag 'pull-nbd-2025-03-05' of https://repo.or.cz/qemu/ericb:
nbd: Defer trace init until after daemonization
qapi: merge common parts of NbdServerOptions and nbd-server-start data
iotests: Stop NBD server in test 162 before starting the next one
iotest: Unbreak 302 with python 3.13
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ensure common code never use this target specific definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250305153929.43687-4-philmd@linaro.org>
Mostly revert commit c80cafa0c7 ("system: Add qemu_init_arch_modules")
but using target_name() instead of the target specific 'TARGET_NAME'
definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250305005225.95051-3-philmd@linaro.org>
This device is only used by the x86 targets, which are only
built as little-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_LITTLE_ENDIAN (besides, the
DEVICE_BIG_ENDIAN case isn't tested). Simplify directly
using DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250212113938.38692-6-philmd@linaro.org>
get_float_exception_flags() returns exception flags,
which are distinct from the FPCR bits used as error code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250211162604.83446-1-philmd@linaro.org>
Use GLib conversion macros to pass misa_mxl_max as
riscv_cpu_class_init() class data.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-5-philmd@linaro.org>
Make XtensaConfigList::config not const. Only modify
XtensaConfig within xtensa_register_core(), when the
class is registered, not when it is initialized.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20250210133134.90879-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210133134.90879-2-philmd@linaro.org>
All CPUClass implementating disas_set_info() must set the
disassemble_info::endian value.
Ensure that by setting %endian to BFD_ENDIAN_UNKNOWN before
calling the CPUClass::disas_set_info() handler, then asserting
%endian is not BFD_ENDIAN_UNKNOWN after the call.
This allows removing the target_words_bigendian() call in disas/.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250210212931.62401-11-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-10-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-9-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-8-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback always set\
the disassemble_info::endian field.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-7-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-6-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-5-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-4-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field for big-endian targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-3-philmd@linaro.org>
Have the CPUClass::disas_set_info() callback set the
disassemble_info::endian field for little-endian targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250210212931.62401-2-philmd@linaro.org>
Fix possible overflow in 1 << (DF_BITS(df) - 2) when DF_BITS(df)
is 64 by using a 64-bit integer for the shift operation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reported-by: Dmitriy Fedin <d.fedin@fobos-nt.ru>
Signed-off-by: Denis Rastyogin <gerben@altlinux.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20250124122707.54264-1-gerben@altlinux.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Currently only system emulation is supported.
Assert no target code is built for user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121142341.17001-4-philmd@linaro.org>
Currently only system emulation is supported.
Assert no target code is built for user emulation.
Remove #ifdef'ry since more work is required before
being able to emulate a user process.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250121142341.17001-3-philmd@linaro.org>
Currently only user emulation is supported.
Assert no target code is built for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Brian Cain <brian.cain@oss.qualcomm.com>
Message-Id: <20250121142341.17001-2-philmd@linaro.org>
OpenRISC timer is architecturally tied to the CPU.
It doesn't belong to the machine init() code to
instanciate it: move its creation when a vCPU is
realized (after being created).
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250114231304.77150-1-philmd@linaro.org>
