Trivial fix for the following ticket:
CID 1568580: Incorrect expression (EVALUATION_ORDER)
In "table_size = table_size = n_vectors * 16U",
"table_size" is written twice with the same value.
Cc: qemu-trivial@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>
Resolves: Coverity CID 1568580
Fixes: 01c1caa9d1 ("hw/riscv/virt.c, riscv-iommu-sys.c: add MSIx support")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
-----BEGIN PGP SIGNATURE-----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=0iQW
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu into staging
RISC-V PR for 10.0
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmdkzjgACgkQr3yVEwxT
# gBOcyA//e0XhAQciQglCZZCfINdOyI8qSh+P2K0qtrXZ4VERHEMp7UoD5CQr2cZv
# h8ij1EkatXCwukVELx0rNckxG33bEFgG1oESnQSrwGE0Iu4csNW24nK5WlUS0/r+
# A5oD2wtzEF+cbhTKrVSDBN/PvlnWTKGEoJRkuXWfz5d4uR9eyQhfED0S2j36lNEC
# X1x/OZoKM89XuXtOFe9g55Z5UNzAatcdTISozL0FydiPh7QeVjTLHh28/tt559MX
# 7v5aJFlQuZ78z1mIHkZmPSorSrJ0zqhkP6NWe1ae06oMgzwRQQhYLppDILV4ZgUF
# 3mSDRoXmBycQXiYNPcHep3LdXfvxr+PpWHSevx8gH1jwm93On7Y/H7Uol6TDXzfC
# mrFjalfV5tzrD90ZvB+s5bCMF1q5Z8Dlj0pYF9aN9P1ILoWy3dndFAPJB6uKKDP7
# Qd4qOQ3dVyHAX9jLmVkB6QvAV/vTDrYTsAxaF/EaoLOy0IoKhjTvgda3XzE1MFKA
# gVafLluADIfSEdqa2QR2ExL8d1SZVoiObCp5TMLRer0HIpg/vQZwjfdbo4BgQKL3
# 7Q6wBxcZUNqrFgspXjm5WFIrdk2rfS/79OmvpNM6SZaK6BnklntdJHJHtAWujGsm
# EM310AUFpHMp2h6Nqnemb3qr5l4d20KSt8DhoPAUq1IE59Kb8XY=
# =0iQW
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Dec 2024 20:54:00 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu: (39 commits)
target/riscv: add support for RV64 Xiangshan Nanhu CPU
target/riscv: add ssstateen
target/riscv/tcg: hide warn for named feats when disabling via priv_ver
target/riscv: Include missing headers in 'internals.h'
target/riscv: Include missing headers in 'vector_internals.h'
target/riscv: Check svukte is not enabled in RV32
target/riscv: Expose svukte ISA extension
target/riscv: Check memory access to meet svukte rule
target/riscv: Support hstatus[HUKTE] bit when svukte extension is enabled
target/riscv: Support senvcfg[UKTE] bit when svukte extension is enabled
target/riscv: Add svukte extension capability variable
hw/riscv: Add the checking if DTB overlaps to kernel or initrd
hw/riscv: Add a new struct RISCVBootInfo
hw/riscv: Support to load DTB after 3GB memory on 64-bit system.
hw/char/riscv_htif: Clarify MemoryRegionOps expect 32-bit accesses
hw/char/riscv_htif: Explicit little-endian implementation
MAINTAINERS: Cover RISC-V HTIF interface
tests/qtest/bios-tables-test: Update virt SPCR golden reference for RISC-V
hw/acpi: Upgrade ACPI SPCR table to support SPCR table revision 4 format
qtest: allow SPCR acpi table changes
...
Conflicts:
target/riscv/cpu.c
Merge conflict with DEFINE_PROP_END_OF_LIST() removal. No Property
array terminator is needed anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a riscv_iommu_reset() helper in the base emulation code that
implements the expected reset behavior as defined by the riscv-iommu
spec.
Devices can then use this helper in their own reset callbacks.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
MSIx support is added in the RISC-V IOMMU platform device by including
the required MSIx facilities to alow software to properly setup the MSIx
subsystem.
We took inspiration of what is being done in the riscv-iommu-pci device,
mainly msix_init() and msix_notify(), while keeping in mind that
riscv-iommu-sys isn't a true PCI device and we don't need to copy/paste
all the contents of these MSIx functions.
Two extra MSI MemoryRegions were added: 'msix-table' and 'msix-pba'.
They are used to manage r/w of the MSI table and Pending Bit Array (PBA)
respectively. Both are subregions of the main IOMMU memory region,
iommu->regs_mr, initialized during riscv_iommu_realize(), and each one
has their own handlers for MSIx reads and writes.
This is the expected memory map when using this device in the 'virt'
machine:
0000000003010000-0000000003010fff (prio 0, i/o): riscv-iommu-regs
0000000003010300-000000000301034f (prio 0, i/o): msix-table
0000000003010400-0000000003010407 (prio 0, i/o): msix-pba
We're now able to set IGS to RISCV_IOMMU_CAP_IGS_BOTH, and userspace is
free to decide which interrupt model to use.
Enabling MSIx support for this device in the 'virt' machine requires
adding 'msi-parent' in the iommu-sys DT.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-6-dbarboza@ventanamicro.com>
[ Changes by AF:
- Used PRIx64 in trace
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This device models the RISC-V IOMMU as a sysbus device. The same design
decisions taken in the riscv-iommu-pci device were kept, namely the
existence of 4 vectors are available for each interrupt cause.
The WSIs are emitted using the input of the s->notify() callback as a
index to an IRQ list. The IRQ list starts at 'base_irq' and goes until
base_irq + 3. This means that boards must have 4 contiguous IRQ lines
available, starting from 'base_irq'.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241106133407.604587-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
