TYPE_CHIPIDEA models an IP block which is also used in TYPE_ZYNQ_MACHINE which
itself is not an IMX device. CONFIG_ZYNQ selects CONFIG_USB_EHCI_SYSBUS while
TYPE_CHIPIDEA is a separate compilation unit, so only works by accident if
CONFIG_IMX is given. Fix that by extracting CONFIG_USB_CHIPIDEA from CONFIG_IMX.
cc: qemu-stable@nongnu.org
Fixes: 616ec12d0f "hw/arm/xilinx_zynq: Fix USB port instantiation"
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250209103604.29545-1-shentey@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When not specified, Cortex-A9MP configures its GIC with 64 external
IRQs, (see commit a32134aad8 "arm:make the number of GIC interrupts
configurable"), and Cortex-15MP to 128 (see commit 528622421e
"hw/cpu/a15mpcore: Correct default value for num-irq").
The Caldexa Highbank board however expects a fixed set of 128
interrupts (see the fixed IRQ length when this board was added in
commit 2488514cef ("arm: SoC model for Calxeda Highbank"). Add the
GIC_EXT_IRQS definition (with a comment) to make that explicit.
Except explicitly setting a property value to its same implicit
value, there is no logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250212154333.28644-8-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When not specified, Cortex-A9MP configures its GIC with 64 external
IRQs, (see commit a32134aad8 "arm:make the number of GIC interrupts
configurable"), and Cortex-15MP to 128 (see commit 528622421e
"hw/cpu/a15mpcore: Correct default value for num-irq").
The Versatile Express board however expects a fixed set of 64
interrupts (see the fixed IRQ length when this board was added in
commit 2055283bcc ("hw/vexpress: Add model of ARM Versatile Express
board"). Add the GIC_EXT_IRQS definition (with a comment) to make
that explicit.
Except explicitly setting a property value to its same implicit
value, there is no logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250212154333.28644-7-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Looking at the Zynq 7000 SoC Technical Reference Manual (UG585 v1.14)
on Appendix A: Register Details, the mpcore Interrupt Controller Type
Register (ICDICTR) has the IT_Lines_Number field read-only with value
0x2, described as:
IT_Lines_Number
b00010 = the distributor provides 96 interrupts,
64 external interrupt lines.
Add a GIC_EXT_IRQS definition (with a comment) to make the number of
GIC external IRQs explicit.
Except explicitly setting a property value to its same implicit
value, there is no logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250212154333.28644-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already have a definition to distinct GIC internal
IRQs versus external ones, use it. No logical changes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250212154333.28644-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When not specified, Cortex-A9MP configures its GIC with 64 external
IRQs (see commit a32134aad8 "arm:make the number of GIC interrupts
configurable"). Add the GIC_EXT_IRQS definition (with a comment)
to make that explicit.
Except explicitly setting a property value to its same implicit
value, there is no logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250212154333.28644-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When not specified, Cortex-A9MP configures its GIC with 64 external
IRQs (see commit a32134aad8 "arm:make the number of GIC interrupts
configurable"). Add the GIC_EXT_IRQS definition (with a comment)
to make that explicit.
Except explicitly setting a property value to its same implicit
value, there is no logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250212154333.28644-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 32 IRQ lines skipped are the GIC internal ones.
Use the GIC_INTERNAL definition for clarity.
No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250212154333.28644-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These devices are only used by the ARM targets, which are
only built as little-endian. Therefore the DEVICE_NATIVE_ENDIAN
definition expand to DEVICE_LITTLE_ENDIAN (besides, the
DEVICE_BIG_ENDIAN case isn't tested). Simplify directly using
DEVICE_LITTLE_ENDIAN.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250212113938.38692-2-philmd@linaro.org>
MachineClass::auto_create_sdcard is only useful to automatically
create a SD card, attach a IF_SD block drive to it and plug the
card onto a SD bus. None of the ARM machines modified by this
commit try to use the IF_SD interface.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-6-philmd@linaro.org>
Invert the 'no_sdcard' logic, renaming it as the more explicit
"auto_create_sdcard". Machines are supposed to create a SD Card
drive when this flag is set. In many cases it doesn't make much
sense (as boards don't expose SD Card host controller), but this
is patch only aims to expose that nonsense; so no logical change
intended (mechanical patch using gsed).
Most of the changes are:
- mc->no_sdcard = ON_OFF_AUTO_OFF;
+ mc->auto_create_sdcard = true;
Except in
. hw/core/null-machine.c
. hw/arm/xilinx_zynq.c
. hw/s390x/s390-virtio-ccw.c
where the disabled option is manually removed (since default):
- mc->no_sdcard = ON_OFF_AUTO_ON;
+ mc->auto_create_sdcard = false;
- mc->auto_create_sdcard = false;
and in system/vl.c we change the 'default_sdcard' type to boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-4-philmd@linaro.org>
Update MachineClass::no_sdcard default implicit AUTO
initialization to explicit OFF. This flag is consumed
in system/vl.c::qemu_disable_default_devices(). Use
this place to assert we don't have anymore AUTO state.
In hw/ppc/e500.c we add the ppce500_machine_class_init()
method to initialize once all the inherited classes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-3-philmd@linaro.org>
MachineClass::no_sdcard is initialized as false by default.
To catch all uses, convert it to a tri-state, having the
current default (false) becoming AUTO.
No logical change intended.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-2-philmd@linaro.org>
When a property value is static (not provided by QMP or CLI),
error shouldn't happen, otherwise it is a programming error.
Therefore simplify and use &error_abort as this can't fail.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20241108154317.12129-11-philmd@linaro.org>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
The A7MPCore forward the IRQs from its internal GIC.
To make the code clearer, add the 'mpcore' and 'gic'
variables.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250130112615.3219-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The A7MPCore forward the IRQs from its internal GIC.
To make the code clearer, add the 'mpcore' and 'gic'
variables. Rename 'd' variable as 'cpu'.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250130112615.3219-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The A9MPCore forward the IRQs from its internal GIC.
To make the code clearer, add the 'mpcore' and 'gic'
variables.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250130112615.3219-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In heterogeneous setup the first vCPU might not be
the one expected, better pass it explicitly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20250130112615.3219-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our style for other conversions of OMAP devices to qdev has been to
inline the creation and wiring into omap310_mpu_init() -- see for
instance the handling of omap-intc, omap-gpio and omap_i2c. Do
the same for omap-mmc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-7-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the OMAP MMC controller to the new SDBus API:
* the controller creates an SDBus bus
* instead of sd_foo functions on the SDState object, call
sdbus_foo functions on the SDBus
* the board code creates a proper TYPE_SD_CARD object and attaches
it to the controller's SDBus, instead of the controller creating
a card directly via sd_init() that never gets attached to any bus
* because the SD card object is on a bus, it gets reset automatically
by the "traverse the qbus tree resetting things" code, and we don't
need to manually reset the card from the controller reset function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-5-peter.maydell@linaro.org>
[PMD: Include "hw/sd/sd.h" instead of "hw/sd/sdcard_legacy.h",
create bus in omap_mmc_initfn() instead of omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Do a minimal conversion of the omap_mmc device model to QDev.
In this commit we do the bare minimum to produce a working device:
* add the SysBusDevice parent_obj and the usual type boilerplate
* omap_mmc_init() now returns a DeviceState*
* reset is handled by sysbus reset, so the SoC reset function
doesn't need to call omap_mmc_reset() any more
* code that should obviously be in init/realize is moved there
from omap_mmc_init()
We leave various pieces of cleanup to later commits:
* rationalizing 'struct omap_mmc_s *' to 'OMAPMMCState *'
* using gpio lines rather than having omap_mmc_init() directly
set s->irq, s->dma
* switching away from the legacy SD API and instead having
the SD card plugged into a bus
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250128104519.3981448-2-peter.maydell@linaro.org>
[PMD: Do not add omap_mmc_realize()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Rather than passing a boolean 'is_big_endian' argument,
directly pass the ELFDATA, which can be unspecified using
the ELFDATANONE value.
Update the call sites:
0 -> ELFDATA2LSB
1 -> ELFDATA2MSB
Note, this allow removing the target_words_bigendian() call
in the GENERIC_LOADER device, where we pass ELFDATANONE.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250127113824.50177-6-philmd@linaro.org>
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
-----BEGIN PGP SIGNATURE-----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=H4p7
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm: Remove various uses of first_cpu global
* hw/char/imx_serial: Fix reset value of UFCR register
* hw/char/imx_serial: Update all state before restarting ageing timer
* hw/pci-host/designware: Expose MSI IRQ
* hw/arm/stellaris: refactoring, cleanup
* hw/arm/stellaris: map both I2C controllers
* tests/functional: Add a test for the arm microbit machine
* target/arm: arm_reset_sve_state() should set FPSR, not FPCR
* target/arm: refactorings preparatory to FEAT_AFP implementation
* fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
* fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
* hw/usb/canokey: Fix buffer overflow for OUT packet
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmeZOi0ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3sUeEACwDhM4ldn/gVZgVN7nf42a
# /CLD/qJx1vqi5bAB5zkY1bSCR9hS2IkhTBoQQH9Ng6ztG1IRpT/tKXDJAemWty70
# XgExdl4yjdwXMQK4JKU9qSfaBTuX7Z8Hz+nA1AnblO/4H+XpVNVJzp8Ee/uWTyEd
# BKPBpwqbIXNwUWEqkzDok074Q05rHlhsJD2DsoJTcmtpROhLHLATwQDZGGFuf56H
# LVcdx6GRP+/mWEGWLtj19mvaR/2cn4rQf+I1MACZ81nRjQCHbCohNAMr2wFsKg1+
# 2jYk9uHdFoambJ5+mFuC55Efk+QJaP4vDR0Gf3jLloFr+rS/5h3HiUuD8dUWOwFd
# mPWXsjwYzqBW2knt1nfq1ByzYWZ8rVQEn5G53dX/eoNXuDGsonZxPnevgmv5kIUc
# /W618Jez1nu9RDtNKccobHEtTGlGInJxJ7YzkU7Q6FO80IAqSdV7t9v7uPLJwcnz
# nQz+wVzb4oOmwMzn3BpKY7N/S7IZOSy3ASNHj8o4yCHMJT8Ki0/N4bl0k0DLxJ0T
# RiNCsV9c7MJfo9a+pbOnu0Lc3SjjropdvHYU+bB7R0mgd8ysN+Tou0dpa+i7tUTu
# DHWqs2/+UApHKBiC+DSynPjjRR2aT/5lYFncGaiEVoEQttPLka3SAzgHPVQZs1zD
# bxZkEAFktAFGIjU70fYNkg==
# =H4p7
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 Jan 2025 15:12:29 EST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [unknown]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20250128-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits)
hw/usb/canokey: Fix buffer overflow for OUT packet
target/arm: Use FPST_A64_F16 for halfprec-to-other conversions
target/arm: Remove redundant advsimd float16 helpers
fpu: Fix a comment in softfloat-types.h
fpu: Rename float_flag_output_denormal to float_flag_output_denormal_flushed
fpu: Rename float_flag_input_denormal to float_flag_input_denormal_flushed
target/arm: Remove now-unused vfp.fp_status_f16 and FPST_FPCR_F16
target/arm: Use FPST_A64_F16 in A64 decoder
target/arm: Use FPST_A32_F16 in A32 decoder
target/arm: Use fp_status_f16_a64 in AArch64-only helpers
target/arm: Use fp_status_f16_a32 in AArch32-only helpers
target/arm: Define new fp_status_f16_a32 and fp_status_f16_a64
target/arm: Remove now-unused vfp.fp_status and FPST_FPCR
target/arm: Use FPST_A64 in A64 decoder
target/arm: Use FPST_A32 in A32 decoder
target/arm: Use fp_status_a32 in vfp_cmp helpers
target/arm: Use fp_status_a32 in vjvct helper
target/arm: Use fp_status_a64 or fp_status_a32 in is_ebf()
target/arm: Use vfp.fp_status_a64 in A64-only helper functions
target/arm: Define new fp_status_a32 and fp_status_a64
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are 2 I2C controllers, map them both, removing
the unimplemented one. Keep the OLED controller on the
first I2C bus.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-7-philmd@linaro.org
[PMM: tweak to appease maybe-use-uninitialized warning]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add definitions (DCx_periph) for the DeviceCapability bits,
replace direct bitmask checks with the DEV_CAP() macro,
which use the extract/deposit API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add definitions for the number of controllers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is nothing mapped at 0x40002000.
I2C#0 is already mapped at 0x40021000.
Remove the invalid mapping added in commits aecfbbc97a & 394c8bbfb7.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Board schematic is useful to corroborate GPIOs/IRQs wiring.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250110160204.74997-2-philmd@linaro.org
[PMM: Use https:// URLs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixes INTD and MSI interrupts poking the same IRQ line without keeping track of
each other's IRQ level. Furthermore, SoCs such as the i.MX 8M Plus don't share
the MSI IRQ with the INTx lines, so expose it as a dedicated pin.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When instanciating the machine model, the machine_init()
implementations usually create the CPUs, so have access
to its first CPU. Use that rather then the &first_cpu
global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Samuel Tardieu <sam@rfc1149.net>
Message-id: 20250112225614.33723-4-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the TYPE_ARMV7M object forward its NVIC interrupt lines,
it is somehow misleading to name it 'nvic'. Add the 'armv7m'
local variable for clarity, but also keep the 'nvic' variable
behaving like before when used for wiring IRQ lines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv7MState object is not simply a CPU, it also
contains the NVIC, SysTick timer, and various MemoryRegions.
Rename the field as 'armv7m', like other Cortex-M boards.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-2-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the -nodefaults option is set, sd devices should not be
automatically created by the machine. Instead they should be defined
on the command line.
Note that it is not currently possible to define which bus an
"sd-card" device is attached to:
-blockdev node-name=drive0,driver=file,filename=/path/to/file.img \
-device sd-card,drive=drive0,id=sd0
and the first bus named "sd-bus" will be used.
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/qemu-devel/20250122070909.1138598-10-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Add Timer model for AST2700 Timer support. The Timer controller include 8 sets
of 32-bit decrement counters.
The base address of TIMER0 to TIMER7 as following.
Base Address of Timer 0 = 0x12C1_0000
Base Address of Timer 1 = 0x12C1_0040
Base Address of Timer 2 = 0x12C1_0080
Base Address of Timer 3 = 0x12C1_00C0
Base Address of Timer 4 = 0x12C1_0100
Base Address of Timer 5 = 0x12C1_0140
Base Address of Timer 6 = 0x12C1_0180
Base Address of Timer 7 = 0x12C1_01C0
The interrupt of TIMER0 to TIMER7 as following.
GICINT16 = TIMER 0 interrupt
GICINT17 = TIMER 1 interrupt
GICINT18 = TIMER 2 interrupt
GICINT19 = TIMER 3 interrupt
GICINT20 = TIMER 4 interrupt
GICINT21 = TIMER 5 interrupt
GICINT22 = TIMER 6 interrupt
GICINT23 = TIMER 7 interrupt
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20250113064455.1660564-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The Write Protect pin of SDHCI model is default active low to match the SDHCI
spec. So, write enable the bit 19 should be 1 and write protected the bit 19
should be 0 at the Present State Register (0x24).
According to the design of AST2600 EVB, the Write Protected pin is active
high by default. To support it, introduces a new "sdhci_wp_inverted"
property in ASPEED MACHINE State and set it true for AST2600 EVB
and set "wp_inverted" property true of sdhci-generic model.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20241114094839.4128404-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
In the loop, we need ignore the index increase when uart == uart_chosen
We should increase the index only after we allocate a serial.
Signed-off-by: Kenneth Jia <kenneth_jia@asus.com>
Fixes: d2b3eaefb4 ("aspeed: Refactor UART init for multi-SoC machines")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/5f9b0c53f1644922ba85522046e92f4c@asus.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The GHES driver requires not only a HEST table, but also a
separate firmware file to store Error Structure records.
It can't do one without the other.
Simplify the caller logic for it to require one function.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <9584bb8953385e165681d5d185c503f8df8ef42f.1736945236.git.mchehab+huawei@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prefer QDev API for QDev objects, avoid the underlying QOM layer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240216110313.17039-7-philmd@linaro.org>
Convert to use sszie_t to represent size internally to avoid
large image overflowing the size.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Some boards such as vmapple don't do real legacy PCI IRQ swizzling.
Instead, they just keep allocating more board IRQ lines for each new
legacy IRQ. Let's support that mode by giving instantiators a new
"nr_irqs" property they can use to support more than 4 legacy IRQ lines.
In this mode, GPEX will export more IRQ lines, one for each device.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241223221645.29911-9-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
-----BEGIN PGP SIGNATURE-----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=0iQW
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu into staging
RISC-V PR for 10.0
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmdkzjgACgkQr3yVEwxT
# gBOcyA//e0XhAQciQglCZZCfINdOyI8qSh+P2K0qtrXZ4VERHEMp7UoD5CQr2cZv
# h8ij1EkatXCwukVELx0rNckxG33bEFgG1oESnQSrwGE0Iu4csNW24nK5WlUS0/r+
# A5oD2wtzEF+cbhTKrVSDBN/PvlnWTKGEoJRkuXWfz5d4uR9eyQhfED0S2j36lNEC
# X1x/OZoKM89XuXtOFe9g55Z5UNzAatcdTISozL0FydiPh7QeVjTLHh28/tt559MX
# 7v5aJFlQuZ78z1mIHkZmPSorSrJ0zqhkP6NWe1ae06oMgzwRQQhYLppDILV4ZgUF
# 3mSDRoXmBycQXiYNPcHep3LdXfvxr+PpWHSevx8gH1jwm93On7Y/H7Uol6TDXzfC
# mrFjalfV5tzrD90ZvB+s5bCMF1q5Z8Dlj0pYF9aN9P1ILoWy3dndFAPJB6uKKDP7
# Qd4qOQ3dVyHAX9jLmVkB6QvAV/vTDrYTsAxaF/EaoLOy0IoKhjTvgda3XzE1MFKA
# gVafLluADIfSEdqa2QR2ExL8d1SZVoiObCp5TMLRer0HIpg/vQZwjfdbo4BgQKL3
# 7Q6wBxcZUNqrFgspXjm5WFIrdk2rfS/79OmvpNM6SZaK6BnklntdJHJHtAWujGsm
# EM310AUFpHMp2h6Nqnemb3qr5l4d20KSt8DhoPAUq1IE59Kb8XY=
# =0iQW
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Dec 2024 20:54:00 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu: (39 commits)
target/riscv: add support for RV64 Xiangshan Nanhu CPU
target/riscv: add ssstateen
target/riscv/tcg: hide warn for named feats when disabling via priv_ver
target/riscv: Include missing headers in 'internals.h'
target/riscv: Include missing headers in 'vector_internals.h'
target/riscv: Check svukte is not enabled in RV32
target/riscv: Expose svukte ISA extension
target/riscv: Check memory access to meet svukte rule
target/riscv: Support hstatus[HUKTE] bit when svukte extension is enabled
target/riscv: Support senvcfg[UKTE] bit when svukte extension is enabled
target/riscv: Add svukte extension capability variable
hw/riscv: Add the checking if DTB overlaps to kernel or initrd
hw/riscv: Add a new struct RISCVBootInfo
hw/riscv: Support to load DTB after 3GB memory on 64-bit system.
hw/char/riscv_htif: Clarify MemoryRegionOps expect 32-bit accesses
hw/char/riscv_htif: Explicit little-endian implementation
MAINTAINERS: Cover RISC-V HTIF interface
tests/qtest/bios-tables-test: Update virt SPCR golden reference for RISC-V
hw/acpi: Upgrade ACPI SPCR table to support SPCR table revision 4 format
qtest: allow SPCR acpi table changes
...
Conflicts:
target/riscv/cpu.c
Merge conflict with DEFINE_PROP_END_OF_LIST() removal. No Property
array terminator is needed anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Provide a macro for the container type across QEMU source tree, rather than
hard code it every time.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20241121192202.4155849-2-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Update the SPCR table to accommodate the SPCR Table revision 4 [1].
The SPCR table has been modified to adhere to the revision 4 format [2].
[1]: https://learn.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-table
[2]: https://github.com/acpica/acpica/pull/931
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20241028015744.624943-3-jeeheng.sia@starfivetech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
