By convention, we put (since X.Y) at the end of the description. Move
the ones that somehow ended up in the middle of the description to the
end.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250527073916.1243024-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250527073916.1243024-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Fixes: a937b6aa73 (qapi: Reformat doc comments to conform to current conventions)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250527073916.1243024-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This change improves performance by moving the hot path of the trace_vhost_commit()(or any other trace function) logic to the header file.
Previously, even when the trace event was disabled, the function call chain:-
trace_vhost_commit()(Or any other trace function) → _nocheck__trace_vhost_commit() → _simple_trace_vhost_commit()
incurred a significant function prologue overhead before checking the trace state.
Disassembly of _simple_trace_vhost_commit() (from the .c file) showed that 11 out of the first 14 instructions were prologue-related, including:
0x10 stp x29, x30, [sp, #-64]! Prologue: allocates 64-byte frame and saves old FP (x29) & LR (x30)
0x14 adrp x3, trace_events_enabled_count Prologue: computes page-base of the trace-enable counter
0x18 adrp x2, __stack_chk_guard Important (maybe prolog don't know?)(stack-protector): starts up the stack-canary load
0x1c mov x29, sp Prologue: sets new frame pointer
0x20 ldr x3, [x3] Prologue: loads the actual trace-enabled count
0x24 stp x19, x20, [sp, #16] Prologue: spills callee-saved regs used by this function (x19, x20)
0x28 and w20, w0, #0xff Tracepoint setup: extracts the low-8 bits of arg0 as the “event boolean”
0x2c ldr x2, [x2] Prologue (cont’d): completes loading of the stack-canary value
0x30 and w19, w1, #0xff Tracepoint setup: extracts low-8 bits of arg1
0x34 ldr w0, [x3] Important: loads the current trace-enabled flag from memory
0x38 ldr x1, [x2] Prologue (cont’d): reads the canary
0x3c str x1, [sp, #56] Prologue (cont’d): writes the canary into the new frame
0x40 mov x1, #0 Prologue (cont’d): zeroes out x1 for the upcoming branch test
0x44 cbnz w0, 0x88 Important: if tracing is disabled (w0==0) skip the heavy path entirely
The trace-enabled check happens after the prologue. This is wasteful when tracing is disabled, which is often the case in production.
To optimize this:
_nocheck__trace_vhost_commit() is now fully inlined in the .h file with
the hot path.It checks trace_event_get_state() before calling into _simple_trace_vhost_commit(), which remains in .c.
This avoids calling into the .c function altogether when the tracepoint is disabled, thereby skipping unnecessary prologue instructions.
This results in better performance by removing redundant instructions in the tracing fast path.
Signed-off-by: Tanish Desai <tanishdesai37@gmail.com>
Message-id: 20250528192528.3968-1-tanishdesai37@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vhost will now no longer set a call notifier if unused
some work towards loongarch testing based on bios-tables-test
some core pci work for SVM support in vtd
vhost vdpa init has been optimized for response time to QMP
A couple more fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmg97ZUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpRBsH/0Fx4NNMaynXmVOgV1rMFirTydhQG5NSdeJv
i1RHd25Rne/RXH0CL71UPuOPADWh6bv9iZTg6RU6g7TwI8K9v3M0R71RlPLh1Lh1
x7fifWNSNXVi18fM9/j+mIg7I2Ye0AaqveezRJWGzqoOxQKKlVI2xspKZBCCkygd
i2tgtR1ORB6+ji6wVoTDPlL42X5Jef5MUT3XOcRR5biHm0JfqxxQKVM83mD+5yMI
0YqjT2BVRzo5rGN7mSuf7tQ50xI6I0wI1+eoWeKHRbg08f709M8TZRDKuVh24Evg
9WnIhKLTzRVdCNLNbw9h9EhxoANpWCyvmnn6GCfkJui40necFHY=
=0lO6
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: features, fixes, tests
vhost will now no longer set a call notifier if unused
some work towards loongarch testing based on bios-tables-test
some core pci work for SVM support in vtd
vhost vdpa init has been optimized for response time to QMP
A couple more fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmg97ZUPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpRBsH/0Fx4NNMaynXmVOgV1rMFirTydhQG5NSdeJv
# i1RHd25Rne/RXH0CL71UPuOPADWh6bv9iZTg6RU6g7TwI8K9v3M0R71RlPLh1Lh1
# x7fifWNSNXVi18fM9/j+mIg7I2Ye0AaqveezRJWGzqoOxQKKlVI2xspKZBCCkygd
# i2tgtR1ORB6+ji6wVoTDPlL42X5Jef5MUT3XOcRR5biHm0JfqxxQKVM83mD+5yMI
# 0YqjT2BVRzo5rGN7mSuf7tQ50xI6I0wI1+eoWeKHRbg08f709M8TZRDKuVh24Evg
# 9WnIhKLTzRVdCNLNbw9h9EhxoANpWCyvmnn6GCfkJui40necFHY=
# =0lO6
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 02 Jun 2025 14:29:41 EDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (26 commits)
hw/i386/pc_piix: Fix RTC ISA IRQ wiring of isapc machine
vdpa: move memory listener register to vhost_vdpa_init
vdpa: move iova_tree allocation to net_vhost_vdpa_init
vdpa: reorder listener assignment
vdpa: add listener_registered
vdpa: set backend capabilities at vhost_vdpa_init
vdpa: reorder vhost_vdpa_set_backend_cap
vdpa: check for iova tree initialized at net_client_start
vhost: Don't set vring call if guest notifier is unused
tests/qtest/bios-tables-test: Use MiB macro rather hardcode value
tests/data/uefi-boot-images: Add ISO image for LoongArch system
uefi-test-tools:: Add LoongArch64 support
pci: Add a PCI-level API for PRI
pci: Add a pci-level API for ATS
pci: Add a pci-level initialization function for IOMMU notifiers
memory: Store user data pointer in the IOMMU notifiers
pci: Add an API to get IOMMU's min page size and virtual address width
pci: Cache the bus mastering status in the device
pcie: Helper functions to check to check if PRI is enabled
pcie: Add a helper to declare the PRI capability for a pcie device
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 56b1f50e3c ("hw/i386/pc: Wire RTC ISA IRQs in south bridges")
attempted to refactor RTC IRQ wiring which was previously done in
pc_basic_device_init() but forgot about the isapc machine. Fix this by
wiring in the code section dedicated exclusively to the isapc machine.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2961
Fixes: 56b1f50e3c ("hw/i386/pc: Wire RTC ISA IRQs in south bridges")
cc: qemu-stable
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Message-Id: <20250526203820.1853-1-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current memory operations like pinning may take a lot of time at the
destination. Currently they are done after the source of the migration is
stopped, and before the workload is resumed at the destination. This is a
period where neigher traffic can flow, nor the VM workload can continue
(downtime).
We can do better as we know the memory layout of the guest RAM at the
destination from the moment that all devices are initializaed. So
moving that operation allows QEMU to communicate the kernel the maps
while the workload is still running in the source, so Linux can start
mapping them.
As a small drawback, there is a time in the initialization where QEMU
cannot respond to QMP etc. By some testing, this time is about
0.2seconds. This may be further reduced (or increased) depending on the
vdpa driver and the platform hardware, and it is dominated by the cost
of memory pinning.
This matches the time that we move out of the called downtime window.
The downtime is measured as the elapsed trace time between the last
vhost_vdpa_suspend on the source and the last vhost_vdpa_set_vring_enable_one
on the destination. In other words, from "guest CPUs freeze" to the
instant the final Rx/Tx queue-pair is able to start moving data.
Using ConnectX-6 Dx (MLX5) NICs in vhost-vDPA mode with 8 queue-pairs,
the series reduces guest-visible downtime during back-to-back live
migrations by more than half:
- 39G VM: 4.72s -> 2.09s (-2.63s, ~56% improvement)
- 128G VM: 14.72s -> 5.83s (-8.89s, ~60% improvement)
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20250522145839.59974-8-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As we are moving to keep the mapping through all the vdpa device life
instead of resetting it at VirtIO reset, we need to move all its
dependencies to the initialization too. In particular devices with
x-svq=on need a valid iova_tree from the beginning.
Simplify the code also consolidating the two creation points: the first
data vq in case of SVQ active and CVQ start in case only CVQ uses it.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20250522145839.59974-7-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit f6fe3e333f ("vdpa: move memory listener to
vhost_vdpa_shared") this piece of code repeatedly assign
shared->listener members. This was not a problem as it was not used
until device start.
However next patches move the listener registration to this
vhost_vdpa_init function. When the listener is registered it is added
to an embedded linked list, so setting its members again will cause
memory corruption to the linked list node.
Do the right thing and only set it in the first vdpa device.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20250522145839.59974-6-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check if the listener has been registered or not, so it needs to be
registered again at start.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20250522145839.59974-5-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The backend does not reset them until the vdpa file descriptor is closed
so there is no harm in doing it only once.
This allows the destination of a live migration to premap memory in
batches, using VHOST_BACKEND_F_IOTLB_BATCH.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20250522145839.59974-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will be used directly by vhost_vdpa_init.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20250522145839.59974-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To map the guest memory while it is migrating we need to create the
iova_tree, as long as the destination uses x-svq=on. Checking to not
override it.
The function vhost_vdpa_net_client_stop clear it if the device is
stopped. If the guest starts the device again, the iova tree is
recreated by vhost_vdpa_net_data_start_first or vhost_vdpa_net_cvq_start
if needed, so old behavior is kept.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20250522145839.59974-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vring call fd is set even when the guest does not use MSI-X (e.g., in the
case of virtio PMD), leading to unnecessary CPU overhead for processing
interrupts.
The commit 96a3d98d2c("vhost: don't set vring call if no vector") optimized the
case where MSI-X is enabled but the queue vector is unset. However, there's an
additional case where the guest uses INTx and the INTx_DISABLED bit in the PCI
config is set, meaning that no interrupt notifier will actually be used.
In such cases, the vring call fd should also be cleared to avoid redundant
interrupt handling.
Fixes: 96a3d98d2c("vhost: don't set vring call if no vector")
Reported-by: Zhiyuan Yuan <yuanzhiyuan@chinatelecom.cn>
Signed-off-by: Jidong Xia <xiajd@chinatelecom.cn>
Signed-off-by: Huaitong Han <hanht2@chinatelecom.cn>
Message-Id: <20250522100548.212740-1-hanht2@chinatelecom.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace 1024 * 1024 with MiB macro.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20250520130158.767083-4-maobibo@loongson.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To test ACPI tables, edk2 needs to be booted with a disk image having
EFI partition. This image is created using UefiTestToolsPkg.
The image is generated with the following command:
make -f tests/uefi-test-tools/Makefile
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20250520130158.767083-3-maobibo@loongson.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to build bios-tables-test iso image for LoongArch system.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20250520130158.767083-2-maobibo@loongson.cn>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A device can send a PRI request to the IOMMU using pci_pri_request_page.
The PRI response is sent back using the notifier managed with
pci_pri_register_notifier and pci_pri_unregister_notifier.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Co-authored-by: Ethan Milon <ethan.milon@eviden.com>
Message-Id: <20250520071823.764266-12-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Devices implementing ATS can send translation requests using
pci_ats_request_translation. The invalidation events are sent
back to the device using the iommu notifier managed with
pci_iommu_register_iotlb_notifier / pci_iommu_unregister_iotlb_notifier.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Co-authored-by: Ethan Milon <ethan.milon@eviden.com>
Message-Id: <20250520071823.764266-11-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is meant to be used by ATS-capable devices.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-10-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will help developers of ATS-capable devices to track a state.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-9-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This kind of information is needed by devices implementing ATS in order
to initialize their translation cache.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-8-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The cached is_master value is necessary to know if a device is
allowed to issue ATS/PRI requests or not as these operations do not go
through the master_enable memory region.
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-7-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pri_enabled can be used to check whether the capability is present and
enabled on a PCIe device
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-6-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-5-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ats_enabled checks whether the capability is
present or not. If so, we read the configuration space to get
the status of the feature (enabled or not).
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-4-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pasid_enabled checks whether the capability is
present or not. If so, we read the configuration space to get
the status of the feature (enabled or not).
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-3-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Clement Mathieu--Drif <clement.mathieu--drif@eviden.com>
Message-Id: <20250520071823.764266-2-clement.mathieu--drif@eviden.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If vCPUs > 255 then x86 common code (x86_cpus_init()) call kvm_enable_x2apic().
But if vCPUs <= 255 then the common code won't calls kvm_enable_x2apic().
This is because commit 8c6619f3e6 ("hw/i386/amd_iommu: Simplify non-KVM
checks on XTSup feature") removed the call to kvm_enable_x2apic when xtsup
is "on", which break things when guest is booted with x2apic mode and
there are <= 255 vCPUs.
Fix this by adding back kvm_enable_x2apic() call when xtsup=on.
Fixes: 8c6619f3e6 ("hw/i386/amd_iommu: Simplify non-KVM checks on XTSup feature")
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Message-Id: <20250516100535.4980-3-sarunkod@amd.com>
Fixes: 8c6619f3e6 ("hw/i386/amd_iommu: Simplify non-KVM checks on XTSup feature")
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Commit c1f46999ef ("amd_iommu: Add support for pass though mode")
introduces the support for "pt" flag by enabling nodma memory when
"pt=off". This allowed VFIO devices to successfully register notifiers
by using nodma region.
But, This also broke things when guest is booted with the iommu=nopt
because, devices bypass the IOMMU and use untranslated addresses (IOVA) to
perform DMA reads/writes to the nodma memory region, ultimately resulting in
a failure to setup the devices in the guest.
Fix the above issue by always enabling the amdvi_dev_as->iommu memory region.
But this will once again cause VFIO devices to fail while registering the
notifiers with AMD IOMMU memory region.
Fixes: c1f46999ef ("amd_iommu: Add support for pass though mode")
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Message-Id: <20250516100535.4980-2-sarunkod@amd.com>
Fixes: c1f46999ef ("amd_iommu: Add support for pass though mode")
Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
virtio processes indirect descriptors even if the respected
feature VIRTIO_RING_F_INDIRECT_DESC was not negotiated.
If qemu is used with reduced set of features to emulate the
hardware device that does not support indirect descriptors,
the will probably trigger problematic flows on the hardware
setup but do not reveal the mistake on qemu.
Add LOG_GUEST_ERROR for such case. This will issue logs with
'-d guest_errors' in the command line
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Message-Id: <20250515063237.808293-1-yuri.benditovich@daynix.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
* target/i386/emulate: more lflags cleanups
* meson: remove need for explicit listing of dependencies in hw_common_arch and
target_common_arch
* rust: small fixes
* hpet: Reorganize register decoding to be more similar to Rust code
* target/i386: fixes for AMD models
* target/i386: new EPYC-Turin CPU model
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg4BxwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP67gf+PEP4EDQP0AJUfxXYVsczGf5snGjz
ro8jYmKG+huBZcrS6uPK5zHYxtOI9bHr4ipTHJyHd61lyzN6Ys9amPbs/CRE2Q4x
Ky4AojPhCuaL2wHcYNcu41L+hweVQ3myj97vP3hWvkatulXYeMqW3/4JZgr4WZ69
A9LGLtLabobTz5yLc8x6oHLn/BZ2y7gjd2LzTz8bqxx7C/kamjoDrF2ZHbX9DLQW
BKWQ3edSO6rorSNHWGZsy9BE20AEkW2LgJdlV9eXglFEuEs6cdPKwGEZepade4bQ
Rdt2gHTlQdUDTFmAbz8pttPxFGMC9Zpmb3nnicKJpKQAmkT/x4k9ncjyAQ==
=XmkU
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/kvm: Intel TDX support
* target/i386/emulate: more lflags cleanups
* meson: remove need for explicit listing of dependencies in hw_common_arch and
target_common_arch
* rust: small fixes
* hpet: Reorganize register decoding to be more similar to Rust code
* target/i386: fixes for AMD models
* target/i386: new EPYC-Turin CPU model
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg4BxwUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroP67gf+PEP4EDQP0AJUfxXYVsczGf5snGjz
# ro8jYmKG+huBZcrS6uPK5zHYxtOI9bHr4ipTHJyHd61lyzN6Ys9amPbs/CRE2Q4x
# Ky4AojPhCuaL2wHcYNcu41L+hweVQ3myj97vP3hWvkatulXYeMqW3/4JZgr4WZ69
# A9LGLtLabobTz5yLc8x6oHLn/BZ2y7gjd2LzTz8bqxx7C/kamjoDrF2ZHbX9DLQW
# BKWQ3edSO6rorSNHWGZsy9BE20AEkW2LgJdlV9eXglFEuEs6cdPKwGEZepade4bQ
# Rdt2gHTlQdUDTFmAbz8pttPxFGMC9Zpmb3nnicKJpKQAmkT/x4k9ncjyAQ==
# =XmkU
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 29 May 2025 03:05:00 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (77 commits)
target/i386/tcg/helper-tcg: fix file references in comments
target/i386: Add support for EPYC-Turin model
target/i386: Update EPYC-Genoa for Cache property, perfmon-v2, RAS and SVM feature bits
target/i386: Add couple of feature bits in CPUID_Fn80000021_EAX
target/i386: Update EPYC-Milan CPU model for Cache property, RAS, SVM feature bits
target/i386: Update EPYC-Rome CPU model for Cache property, RAS, SVM feature bits
target/i386: Update EPYC CPU model for Cache property, RAS, SVM feature bits
rust: make declaration of dependent crates more consistent
docs: Add TDX documentation
i386/tdx: Validate phys_bits against host value
i386/tdx: Make invtsc default on
i386/tdx: Don't treat SYSCALL as unavailable
i386/tdx: Fetch and validate CPUID of TD guest
target/i386: Print CPUID subleaf info for unsupported feature
i386: Remove unused parameter "uint32_t bit" in feature_word_description()
i386/cgs: Introduce x86_confidential_guest_check_features()
i386/tdx: Define supported KVM features for TDX
i386/tdx: Add XFD to supported bit of TDX
i386/tdx: Add supported CPUID bits relates to XFAM
i386/tdx: Add supported CPUID bits related to TD Attributes
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The test fails with --enable-asan as the error struct is never freed.
In the case where the test expects a success but it fails, let's also
report the error for debugging (it will be freed internally).
Fixes 316e8ee8d6 ("util/qemu-sockets: Refactor inet_parse() to use QemuOpts")
Signed-off-by: Matheus Tavares Bernardino <matheus.bernardino@oss.qualcomm.com>
Reviewed-by: Juraj Marcin <jmarcin@redhat.com>
Message-ID: <518d94c7db20060b2a086cf55ee9bffab992a907.1748280011.git.matheus.bernardino@oss.qualcomm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Simplify merging vmxnet3_realize() within vmxnet3_instance_init(),
removing the need for device_class_set_parent_realize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-20-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
VMXNET3_COMPAT_FLAG_DISABLE_PCIE was only used by the
hw_compat_2_5[] array, via the 'x-disable-pcie=on' property.
We removed all machines using that array, lets remove all the
code around VMXNET3_COMPAT_FLAG_DISABLE_PCIE.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-19-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS was only used by the
hw_compat_2_5[] array, via the 'x-old-msi-offsets=on' property.
We removed all machines using that array, lets remove all the
code around VMXNET3_COMPAT_FLAG_OLD_MSI_OFFSETS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-18-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Simplify replacing pvscsi_realize() by pvscsi_instance_init(),
removing the need for device_class_set_parent_realize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-17-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
PVSCSI_COMPAT_DISABLE_PCIE_BIT was only used by the
hw_compat_2_5[] array, via the 'x-disable-pcie=on' property.
We removed all machines using that array, lets remove all the
code around PVSCSI_COMPAT_DISABLE_PCIE_BIT, including the now
unused PVSCSIState::compat_flags field.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-16-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
PVSCSI_COMPAT_OLD_PCI_CONFIGURATION was only used by the
hw_compat_2_5[] array, via the 'x-old-pci-configuration=on'
property. We removed all machines using that array, lets remove
all the code around PVSCSI_COMPAT_OLD_PCI_CONFIGURATION.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-15-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The hw_compat_2_5[] array was only used by the pc-q35-2.5 and
pc-i440fx-2.5 machines, which got removed. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-13-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The MachineClass::legacy_fw_cfg_order boolean was only used
by the pc-q35-2.5 and pc-i440fx-2.5 machines, which got
removed. Remove it along with:
- FW_CFG_ORDER_OVERRIDE_* definitions
- fw_cfg_set_order_override()
- fw_cfg_reset_order_override()
- fw_cfg_order[]
- rom_set_order_override()
- rom_reset_order_override()
Simplify CLI and pc_vga_init() / pc_nic_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-12-philmd@linaro.org>
[thuth: Fix error from check_patch.pl wrt to an empty "for" loop]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The X86MachineClass::save_tsc_khz boolean was only used
by the pc-q35-2.5 and pc-i440fx-2.5 machines, which got
removed. Remove it and simplify tsc_khz_needed().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-11-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These machines has been supported for a period of more than 6 years.
According to our versioned machine support policy (see commit
ce80c4fa6f "docs: document special exception for machine type
deprecation & removal") they can now be removed.
Remove the now unused empty pc_compat_2_5[] array.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-10-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
VIRTIO_PCI_FLAG_DISABLE_PCIE was only used by the hw_compat_2_4[]
array, via the 'x-disable-pcie=false' property. We removed all
machines using that array, lets remove all the code around
VIRTIO_PCI_FLAG_DISABLE_PCIE (see commit 9a4c0e220d for similar
VIRTIO_PCI_FLAG_* enum removal).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-9-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
VIRTIO_PCI_FLAG_MIGRATE_EXTRA was only used by the
hw_compat_2_4[] array, via the 'migrate-extra=true'
property. We removed all machines using that array,
lets remove all the code around VIRTIO_PCI_FLAG_MIGRATE_EXTRA.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20250512083948.39294-8-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
E1000_FLAG_MAC was only used by the hw_compat_2_4[] array,
via the 'extra_mac_registers=off' property. We removed all
machines using that array, lets remove all the code around
E1000_FLAG_MAC, including the MAC_ACCESS_FLAG_NEEDED enum,
similarly to commit fa4ec9ffda ("e1000: remove old
compatibility code").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20250512083948.39294-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The hw_compat_2_4[] array was only used by the pc-q35-2.4 and
pc-i440fx-2.4 machines, which got removed. Remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-6-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
