Current versions of Windows call _DSM(func=7) regardless
of whether it is supported or not. It leads to NICs having bogus
'PCI Label Id = 0', where none should be set at all.
Also presence of 'PCI Label Id' triggers another Windows bug
on localized versions that leads to hangs. The later bug is fixed
in latest updates for 'Windows Server' but not in consumer
versions of Windows (and there is no plans to fix it
as far as I'm aware).
Given it's easy, implement Microsoft suggested workaround
(return invalid Package) so that affected Windows versions
could boot on QEMU.
This would effectvely remove bogus 'PCI Label Id's on NICs,
but MS teem confirmed that flipping 'PCI Label Id' should not
change 'Network Connection' ennumeration, so it should be safe
for QEMU to change _DSM without any compat code.
Smoke tested with WinXP and WS2022
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/774
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250115125342.3883374-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 0b05339198)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250115125342.3883374-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 1ad32644fe)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: drop x86/ subdir and drop a few files not relevant for 7.2)
The end vector calculation has a bug that results in polling fewer
than required vectors when reading at a non-zero offset in PBA memory.
Fixes: bbef882cc1 ("msi: add API to get notified about pending bit poll")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20241212120402.1475053-1-npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 42e2a7a0ab)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
PCI hotplug for downstream endpoints on arm fails because Linux'
PCIe hotplug driver doesn't like the QEMU provided LNKSTA:
pcieport 0000:08:01.0: pciehp: Slot(2): Card present
pcieport 0000:08:01.0: pciehp: Slot(2): Link Up
pcieport 0000:08:01.0: pciehp: Slot(2): Cannot train link: status 0x2000
There's 2 cases where LNKSTA isn't setup properly:
* the downstream device has no express capability
* max link width of the bridge is 0
Move the sanity checks added via 88c869198a
("pci: Sanity test minimum downstream LNKSTA") outside of the
branch to make sure downstream ports always have a valid LNKSTA.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20241203121928.14861-1-sebott@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 694632fd44)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU would crash with a failed assertion if the XHCI controller
attempted to raise the interrupt on an interrupter corresponding
to a MSI vector with a higher index than the highest configured
for the device by the guest driver.
This behaviour is correct on the MSI/PCI side: per PCI 3.0 spec,
devices must ensure they do not send MSI notifications for
vectors beyond the range of those allocated by the system/driver
software. Unlike MSI-X, there is no generic way for handling
aliasing in the case of fewer allocated vectors than requested,
so the specifics are up to device implementors. (Section
6.8.3.4. "Sending Messages")
It turns out the XHCI spec (Implementation Note in section 4.17,
"Interrupters") requires that the host controller signal the MSI
vector with the number computed by taking the interrupter number
modulo the number of enabled MSI vectors.
This change introduces that modulo calculation, fixing the
failed assertion. This makes the device work correctly in MSI mode
with macOS's XHCI driver, which only allocates a single vector.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250112210056.16658-2-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit bb5b7fced6)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Do not propagate error to the upper, directly output the error
to avoid leaks.
Fixes: 2fda101de0 ("virtio-crypto: Support asynchronous mode")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2714
Signed-off-by: Gabriel Barrantes <gabriel.barrantes.dev@outlook.com>
Reviewed-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <DM8PR13MB50781054A4FDACE6F4FB6469B30F2@DM8PR13MB5078.namprd13.prod.outlook.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 78b0c15a56)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fixes: 644e3c5d81 ("missing vmx features for Skylake-Server and Cascadelake-Server")
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 93dcc9390e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
TCG trace-events were deprecated before the v6.2 release,
and removed for v7.0.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit b4859e8f33)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
KVM is not happy when starting a VM with weird RAM sizes:
# qemu-system-s390x --enable-kvm --nographic -m 1234K
qemu-system-s390x: kvm_set_user_memory_region: KVM_SET_USER_MEMORY_REGION
failed, slot=0, start=0x0, size=0x244000: Invalid argument
kvm_set_phys_mem: error registering slot: Invalid argument
Aborted (core dumped)
Let's handle that in a better way by rejecting such weird RAM sizes
right from the start:
# qemu-system-s390x --enable-kvm --nographic -m 1234K
qemu-system-s390x: ram size must be multiples of 1 MiB
Message-ID: <20241219144115.2820241-2-david@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
(cherry picked from commit 14e568ab48)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The macOS builds in our CI (and possibly other very recent distros)
are currently broken since the update to libnfs version 6 there.
That version apparently comes with a big API breakage. v5.0.3 was
the final release of the old API (see the libnfs commit here:
4379837 ).
Disallow version 6.x for now to get the broken CI job working
again. Once somebody had enough time to adapt our code in
block/nfs.c, we can revert this change again.
Message-ID: <20241218065157.209020-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit e2d98f2571)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup)
In the GICv3 ITS model, we have a common coding pattern which has a
local C struct like "DTEntry dte", which is a C representation of an
in-guest-memory data structure, and we call a function such as
get_dte() to read guest memory and fill in the C struct. These
functions to read in the struct sometimes have cases where they will
leave early and not fill in the whole struct (for instance get_dte()
will set "dte->valid = false" and nothing else for the case where it
is passed an entry_addr implying that there is no L2 table entry for
the DTE). This then causes potential use of uninitialized memory
later, for instance when we call a trace event which prints all the
fields of the struct. Sufficiently advanced compilers may produce
-Wmaybe-uninitialized warnings about this, especially if LTO is
enabled.
Rather than trying to carefully separate out these trace events into
"only the 'valid' field is initialized" and "all fields can be
printed", zero-init all the structs when we define them. None of
these structs are large (the biggest is 24 bytes) and having
consistent behaviour is less likely to be buggy.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2718
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241213182337.3343068-1-peter.maydell@linaro.org
(cherry picked from commit 9678b9c505)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the binary loaded via -kernel is *not* a linux kernel (in which
case protocol == 0), do not patch the linux kernel header fields.
It's (a) pointless and (b) might break binaries by random patching
and (c) changes the binary hash which in turn breaks secure boot
verification.
Background: OVMF happily loads and runs not only linux kernels but
any efi binary via direct kernel boot.
Note: Breaking the secure boot verification is a problem for linux
kernels too, but fixed that is left for another day ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240905141211.1253307-3-kraxel@redhat.com>
(cherry picked from commit 57e2cc9abf)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: it is in hw/i386/x86.c not hw/i386/x86-common.c in 7.2.x)
Fixes test-failure on Fedora 40 CI.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240527040711.311865-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit e7fca81e17)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We used to only have a single UART on the platform and it was located at
address 0x90000000. When the number of UARTs was increased to 4, the
first UART remained at it's location, but instead of being the first one
to be registered, it became the last.
This caused QEMU to pick 0x90000300 as the default UART, which broke
software that hardcoded the address of 0x90000000 and expected it's
output to be visible when the user configured only a single console.
This caused regressions[1] in the barebox test suite when updating to a
newer QEMU. As there seems to be no good reason to register the UARTs in
inverse order, let's register them by ascending address, so existing
software can remain oblivious to the additional UART ports.
Changing the order of uart registration alone breaks Linux which
was choosing the UART at 0x90000300 as the default for ttyS0. To fix
Linux we fix three things in the device tree:
1. Define stdout-path only one time for the first registered UART
instead of incorrectly defining for each UART.
2. Change the UART alias name from 'uart0' to 'serial0' as almost all
Linux tty drivers look for an alias starting with "serial".
3. Add the UART nodes so they appear in the final DTB in the
order starting with the lowest address and working upwards.
In summary these changes mean that the QEMU default UART (serial_hd(0))
is now setup where:
* serial_hd(0) is the lowest-address UART
* serial_hd(0) is listed first in the DTB
* serial_hd(0) is the /chosen/stdout-path one
* the /aliases/serial0 alias points at serial_hd(0)
[1]: https://lore.barebox.org/barebox/707e7c50-aad1-4459-8796-0cc54bab32e2@pengutronix.de/T/#m5da26e8a799033301489a938b5d5667b81cef6ad
Fixes: 777784bda4 ("hw/openrisc: support 4 serial ports in or1ksim")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
[stafford: Change to serial0 alias and update change message, reverse
uart registration order]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 26dcf2be7e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The ppc (pnv and spapr) NMI injection code does not go through the
asynchronous interrupt path and set a bit in env->pending_interrupts
and raise an interrupt request that the cpu_exec() loop can see.
Instead it injects the exception directly into registers.
This can lead to cpu_exec() missing that the thread has work to do,
if a NMI is injected while it was idle.
Fix this by clearing halted when injecting the interrupt. Probably
NMI injection should be reworked to use the interrupt request interface,
but this seems to work as a minimal fix.
Fixes: 3431648272 ("spapr: Add support for new NMI interface")
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit fa416ae615)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This verifies expected behaviour of previous bug fix patch.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <7017658155c517b9665b75333a97c79aa2d4f3df.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit eaab44ccc5)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With a valid file ID (FID) of an open file, it should be possible to send
a 'Tgettattr' 9p request and successfully receive a 'Rgetattr' response,
even if the file has been removed in the meantime. Currently this would
fail with ENOENT.
I.e. this fixes the following misbehaviour with a 9p Linux client:
open("/home/tst/filename", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
unlink("/home/tst/filename") = 0
fstat(3, 0x23aa1a8) = -1 ENOENT (No such file or directory)
Expected results:
open("/home/tst/filename", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
unlink("/home/tst/filename") = 0
fstat(3, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
This is because 9p server is always using a path name based lstat() call
which fails as soon as the file got removed. So to fix this, use fstat()
whenever we have an open file descriptor already.
Fixes: 00ede4c252 ("virtio-9p: getattr server implementation...")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/103
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4c41ad47f449a5cc8bfa9285743e029080d5f324.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit c81e7219e0)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The comment claims that we'd only support basic Tgetattr fields. This is
no longer true, so remove this comment.
Fixes: e06a765efb ("hw/9pfs: Add st_gen support in getattr reply")
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <fb364d12045217a4c6ccd0dd6368103ddb80698b.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit 3bc4db4443)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After removing a file from the file system, we should still be able to
work with the file if we already had it open before removal.
As a first step we verify that it is possible to write to an unlinked
file, as this is what already works. This test is extended later on
after having fixed other use cases after unlink that are not working
yet.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <3d6449d4df25bcdd3e807eff169f46f1385e5257.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit 462db8fb1d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix, pick it to stable so the next patch in this place applies)
'Tgetattr' 9p request and its 'Rgetattr' response types are already used
by test client, however this response type is yet missing in function
rmessage_name(), so add it.
Fixes: a6821b8284 ("tests/9pfs: compare QIDs in fs_walk_none() test")
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <e183da80d390cfd7d55bdbce92f0ff6e3e5cdced.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit 4ec9849650)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
All 9p response types are prefixed with an "R", therefore fix
"READDIR" -> "RREADDIR" in function rmessage_name().
Fixes: 4829469fd9 ("tests/virtio-9p: added readdir test")
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <daad7af58b403aaa2487c566032beca36664b30e.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit abf0f092c1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Host drivers do not necessarily set cdb_len in megasas io commands.
With commits 6d1511cea0 ("scsi: Reject commands if the CDB length
exceeds buf_len") and fe9d8927e2 ("scsi: Add buf_len parameter to
scsi_req_new()"), this results in failures to boot Linux from affected
SCSI drives because cdb_len is set to 0 by the host driver.
Set the cdb length to its actual size to solve the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Link: https://lore.kernel.org/r/20230228171129.4094709-1-linux@roeck-us.net
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3abb67323a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The libssh does not handle non-blocking mode in SFTP correctly. The
driver code already changes the mode to blocking for the SFTP
initialization, but for some reason changes to non-blocking mode.
This used to work accidentally until libssh in 0.11 branch merged
the patch to avoid infinite looping in case of network errors:
https://gitlab.com/libssh/libssh-mirror/-/merge_requests/498
Since then, the ssh driver in qemu fails to read files over SFTP
as the first SFTP messages exchanged after switching the session
to non-blocking mode return SSH_AGAIN, but that message is lost
int the SFTP internals and interpretted as SSH_ERROR, which is
returned to the caller:
https://gitlab.com/libssh/libssh-mirror/-/issues/280
This is indeed an issue in libssh that we should address in the
long term, but it will require more work on the internals. For
now, the SFTP is not supported in non-blocking mode.
Fixes: https://gitlab.com/libssh/libssh-mirror/-/issues/280
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-ID: <20241113125526.2495731-1-rjones@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit fbdea3d6c1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
pci_devfn properties accept either a string or an integer as input. To
implement this, set_pci_devfn() first tries to visit the option as a
string, and if that fails, it visits it as an integer instead. While the
QemuOpts visitor happens to accept this, it is invalid according to the
visitor interface. QObject input visitors run into an assertion failure
when this is done.
QObject input visitors are used with the JSON syntax version of -device
on the command line:
$ ./qemu-system-x86_64 -enable-kvm -M q35 -device pcie-pci-bridge,id=pci.1,bus=pcie.0 -blockdev null-co,node-name=disk -device '{ "driver": "virtio-blk-pci", "drive": "disk", "id": "virtio-disk0", "bus": "pci.1", "addr": 1 }'
qemu-system-x86_64: ../qapi/qobject-input-visitor.c:143: QObject *qobject_input_try_get_object(QObjectInputVisitor *, const char *, _Bool): Assertion `removed' failed.
The proper way to accept both strings and integers is using the
alternate mechanism, which tells us the type of the input before it's
visited. With this information, we can directly visit it as the right
type.
This fixes set_pci_devfn() by using the alternate mechanism.
Cc: qemu-stable@nongnu.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20241119120353.57812-1-kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 5102f9df4a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
work_around_broken_dhclient() accesses IP and UDP headers to detect
relevant packets and to calculate checksums, but it didn't check if
the packet has size sufficient to accommodate them, causing out-of-bound
access hazards. Fix this by correcting the size requirement.
Fixes: 1d41b0c1ec ("Work around dhclient brokenness")
Cc: qemu-stable@nongnu.org
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit a8575f7fb2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
- Various developers are reluctant to git Cirrus-CI the permissions
requested to access their GitHub account.
- When we use the cirrus-run script to trigger Cirrus-CI job from
GitLab-CI, the GitLab-CI job is restricted to a 1h timeout
(often not enough).
- Although Cirrus-CI VMs are more powerful than GitLab-CI ones,
its free plan is limited in 2 concurrent jobs.
- The GitLab-CI MSYS2 jobs are a 1:1 mapping with the Cirrus-CI ones
(modulo the environment caching).
Reduce the maintenance burden by removing the Cirrus-CI config file,
keeping the GitLab-CI jobs.
Update Yonggang Luo's maintenance file list to the new file, which
use the same environment shell.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230322135721.61138-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit da80f11efe)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: ignore previous changes in .cirrus.yml since it is being removed anyway)
In extioi_setirq() we try to operate on a bit array stored as an
array of uint32_t using the set_bit() and clear_bit() functions
by casting the pointer to 'unsigned long *'.
This has two problems:
* the alignment of 'uint32_t' is less than that of 'unsigned long'
so we pass an insufficiently aligned pointer, which is
undefined behaviour
* on big-endian hosts the 64-bit 'unsigned long' will have
its two halves the wrong way around, and we will produce
incorrect results
The undefined behaviour is shown by the clang undefined-behaviour
sanitizer when running the loongarch64-virt functional test:
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/bitops.h:41:5: runtime error: store to misaligned address 0x555559745d9c for type 'unsigned long', which requires 8 byte alignment
0x555559745d9c: note: pointer points here
ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
#0 0x555556fb81c4 in set_bit /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/bitops.h:41:9
#1 0x555556fb81c4 in extioi_setirq /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../hw/intc/loongarch_extioi.c:65:9
#2 0x555556fb6e90 in pch_pic_irq_handler /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../hw/intc/loongarch_pch_pic.c:75:5
#3 0x555556710265 in serial_ioport_write /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../hw/char/serial.c
Fix these problems by using set_bit32() and clear_bit32(),
which work with bit arrays stored as an array of uint32_t.
Cc: qemu-stable@nongnu.org
Fixes: cbff2db1e9 ("hw/intc: Add LoongArch extioi interrupt controller(EIOINTC)")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-id: 20241108135514.4006953-4-peter.maydell@linaro.org
(cherry picked from commit 335be5bc44)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: drop hunk in hw/intc/loongarch_extioi.c:extioi_update_sw_coremap()
due to missing v8.2.0-548-g428a6ef4396a "hw/intc/loongarch_extioi: Add vmstate post_load support")
Currently bitops.h defines a set of operations that work on
arbitrary-length bit arrays. However (largely because they
originally came from the Linux kernel) the bit array storage is an
array of 'unsigned long'. This is OK for the kernel and even for
parts of QEMU where we don't really care about the underlying storage
format, but it is not good for devices, where we often want to expose
the storage to the guest and so need a type that is not
variably-sized between host OSes.
We already have a workaround for this in the GICv3 model:
arm_gicv3_common.h defines equivalents of the bit operations that
work on uint32_t. It turns out that we should also be using
something similar in hw/intc/loongarch_extioi.c, which currently
casts a pointer to a uint32_t array to 'unsigned long *' in
extio_setirq(), which is both undefined behaviour and not correct on
a big-endian host.
Define equivalents of the set_bit() function family which work
with a uint32_t array.
(Cc stable because we're about to provide a bugfix to
loongarch_extioi which will depend on this commit.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241108135514.4006953-2-peter.maydell@linaro.org
(cherry picked from commit 3d7680fb18)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The clang sanitizer complains about the code in the EOI handling
of openpic_cpu_write_internal():
UBSAN_OPTIONS=halt_on_error=1:abort_on_error=1 ./build/clang/qemu-system-ppc -M mac99,graphics=off -display none -kernel day15/invaders.elf
../../hw/intc/openpic.c:1034:16: runtime error: index -1 out of bounds for type 'IRQSource[264]' (aka 'struct IRQSource[264]')
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../../hw/intc/openpic.c:1034:16 in
This is because we do
src = &opp->src[n_IRQ];
when n_IRQ may be -1. This is in practice harmless because if n_IRQ
is -1 then we don't do anything with the src pointer, but it is
undefined behaviour. (This has been present since this device
was first added to QEMU.)
Rearrange the code so we only do the array index when n_IRQ is not -1.
Cc: qemu-stable@nongnu.org
Fixes: e9df014c0b ("Implement embedded IRQ controller for PowerPC 6xx/740 & 75")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20241105180205.3074071-1-peter.maydell@linaro.org
(cherry picked from commit 3bf7dcd47a)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The ClearPortFeature control message fails for PORT_POWER because there
is no break; at the end of the case statement, causing it to fall through
to the failure handler. Add the missing break; to solve the problem.
Fixes: 1cc403eb21 ("usb-hub: emulate per port power switching")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241112170152.217664-11-linux@roeck-us.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit b2cc699979)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When SET_STREAM_FORMAT is called, the st->buft timer is overwritten, thus
causing a memory leak. This was originally fixed in commit 816139ae6a5
("hw/audio/hda: fix memory leak on audio setup", 2024-11-14) but that
caused the audio to break in SPICE.
Fortunately, a simpler fix is possible. The timer only needs to be
reset, because the callback is always the same (st->output is set at
realize time in hda_audio_init); call to timer_new_ns overkill. Replace
it with timer_del and only initialize the timer once; for simplicity,
do it even if use_timer is false.
An even simpler fix would be to free the old time in hda_audio_setup().
However, it seems better to place the initialization of the timer close
to that of st->ouput.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20241114125318.1707590-3-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 626b39006d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When compiling QEMU with --enable-cfi, the "q800" m68k machine
currently crashes very early, when the q800_machine_init() function
tries to wire the interrupts of the "via1" device.
This happens because TYPE_MOS6522_Q800_VIA1 is supposed to be a
proper SysBus device, but its parent (TYPE_MOS6522) has a mistake
in its class definition where it is only derived from DeviceClass,
and not from SysBusDeviceClass, so we end up in funny memory access
issues here. Using the right class hierarchy for the MOS6522 device
fixes the problem.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2675
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes: 51f233ec92 ("misc: introduce new mos6522 VIA device")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241114104653.963812-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit c3d7c18b0d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In simd_desc() we create a SIMD descriptor from various pieces
including an arbitrary data value from the caller. We try to
sanitize these to make sure everything will fit: the 'data' value
needs to fit in the SIMD_DATA_BITS (== 22) sized field. However we
do that sanitizing with:
tcg_debug_assert(data == sextract32(data, 0, SIMD_DATA_BITS));
This works for the case where the data is supposed to be considered
as a signed integer (which can then be returned via simd_data()).
However, some callers want to treat the data value as unsigned.
Specifically, for the Arm SVE operations, make_svemte_desc()
assembles a data value as a collection of fields, and it needs to use
all 22 bits. Currently if MTE is enabled then its MTEDESC SIZEM1
field may have the most significant bit set, and then it will trip
this assertion.
Loosen the assertion so that we only check that the data value will
fit into the field in some way, either as a signed or as an unsigned
value. This means we will fail to detect some kinds of bug in the
callers, but we won't spuriously assert for intentional use of the
data field as unsigned.
Cc: qemu-stable@nongnu.org
Fixes: db432672dc ("tcg: Add generic vector expanders")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2601
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20241115172515.1229393-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 8377e3fb85)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This path is reachable with plugins enabled, and provoked
with run-plugin-catch-syscalls-with-libinline.so.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241112141232.321354-1-richard.henderson@linaro.org>
(cherry picked from commit f275508046)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The commit fd6f7798ac ("linux-user: Use direct syscalls for setuid(),
etc") added direct syscall wrappers for setuid(), setgid(), etc since the
system calls have different semantics than the libc functions.
Add and use the corresponding wrappers for setreuid and setregid which
were missed in that commit.
This fixes the build of the debian package of the uid_wrapper library
(https://cwrap.org/uid_wrapper.html) when running linux-user.
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <Zyo2jMKqq8hG8Pkz@p100>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 8491026a08)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit b56617bbcb ("target/i386: Walk NPT in guest real mode") added
logic to run the page table walker even in real mode if we are in NPT
mode. That function then determined whether real mode or paging is
active based on whether the pg_mode variable was 0.
Unfortunately pg_mode is 0 in two situations:
1) Paging is disabled (real mode)
2) Paging is in 2-level paging mode (32bit without PAE)
That means the walker now assumed that 2-level paging mode was real
mode, breaking NetBSD as well as Windows XP.
To fix that, this patch adds a new PG flag to pg_mode which indicates
whether paging is active at all and uses that to determine whether we
are in real mode or not.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2654
Fixes: b56617bbcb ("target/i386: Walk NPT in guest real mode")
Fixes: 253c0a06e0 (commit b56617bbcb in stable-7.2.x series)
Signed-off-by: Alexander Graf <graf@amazon.com>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Link: https://lore.kernel.org/r/20241106154329.67218-1-graf@amazon.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8fa11a4df3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A bad (broken or malicious) 9p client (guest) could cause QEMU host to
crash by sending a 9p 'Treaddir' request with a numeric file ID (FID) that
was previously opened for a file instead of an expected directory:
#0 0x0000762aff8f4919 in __GI___rewinddir (dirp=0xf) at
../sysdeps/unix/sysv/linux/rewinddir.c:29
#1 0x0000557b7625fb40 in do_readdir_many (pdu=0x557bb67d2eb0,
fidp=0x557bb67955b0, entries=0x762afe9fff58, offset=0, maxsize=131072,
dostat=<optimized out>) at ../hw/9pfs/codir.c:101
#2 v9fs_co_readdir_many (pdu=pdu@entry=0x557bb67d2eb0,
fidp=fidp@entry=0x557bb67955b0, entries=entries@entry=0x762afe9fff58,
offset=0, maxsize=131072, dostat=false) at ../hw/9pfs/codir.c:226
#3 0x0000557b7625c1f9 in v9fs_do_readdir (pdu=0x557bb67d2eb0,
fidp=0x557bb67955b0, offset=<optimized out>,
max_count=<optimized out>) at ../hw/9pfs/9p.c:2488
#4 v9fs_readdir (opaque=0x557bb67d2eb0) at ../hw/9pfs/9p.c:2602
That's because V9fsFidOpenState was declared as union type. So the
same memory region is used for either an open POSIX file handle (int),
or a POSIX DIR* pointer, etc., so 9p server incorrectly used the
previously opened (valid) POSIX file handle (0xf) as DIR* pointer,
eventually causing a crash in glibc's rewinddir() function.
Root cause was therefore a missing check in 9p server's 'Treaddir'
request handler, which must ensure that the client supplied FID was
really opened as directory stream before trying to access the
aforementioned union and its DIR* member.
Cc: qemu-stable@nongnu.org
Fixes: d62dbb51f7 ("virtio-9p: Add fidtype so that we can do type ...")
Reported-by: Akihiro Suda <suda.kyoto@gmail.com>
Tested-by: Akihiro Suda <suda.kyoto@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1t8GnN-002RS8-E2@kylie.crudebyte.com>
(cherry picked from commit 042b4ebfd2)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If a host chooses to use the SQHD "hint" in the CQE to know if there is
room in the submission queue for additional commands, it may result in a
situation where there are not enough internal resources (struct
NvmeRequest) available to process the command. For a lack of a better
term, the host may "over-commit" the device (i.e., it may have more
inflight commands than the queue size).
For example, assume a queue with N entries. The host submits N commands
and all are picked up for processing, advancing the head and emptying
the queue. Regardless of which of these N commands complete first, the
SQHD field of that CQE will indicate to the host that the queue is
empty, which allows the host to issue N commands again. However, if the
device has not posted CQEs for all the previous commands yet, the device
will have less than N resources available to process the commands, so
queue processing is suspended.
And here lies an 11 year latent bug. In the absense of any additional
tail updates on the submission queue, we never schedule the processing
bottom-half again unless we observe a head update on an associated full
completion queue. This has been sufficient to handle N-to-1 SQ/CQ setups
(in the absense of over-commit of course). Incidentially, that "kick all
associated SQs" mechanism can now be killed since we now just schedule
queue processing when we return a processing resource to a non-empty
submission queue, which happens to cover both edge cases. However, we
must retain kicking the CQ if it was previously full.
So, apparently, no previous driver tested with hw/nvme has ever used
SQHD (e.g., neither the Linux NVMe driver or SPDK uses it). But then OSv
shows up with the driver that actually does. I salute you.
Fixes: f3c507adcd ("NVMe: Initial commit for new storage interface")
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2388
Reported-by: Waldemar Kozaczuk <jwkozaczuk@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 9529aa6bb4)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Our implementation of the indexed version of SVE SDOT/UDOT/USDOT got
the calculation of the inner loop terminator wrong. Although we
correctly account for the element size when we calculate the
terminator for the first iteration:
intptr_t segend = MIN(16 / sizeof(TYPED), opr_sz_n);
we don't do that when we move it forward after the first inner loop
completes. The intention is that we process the vector in 128-bit
segments, which for a 64-bit element size should mean (1, 2), (3, 4),
(5, 6), etc. This bug meant that we would iterate (1, 2), (3, 4, 5,
6), (7, 8, 9, 10) etc and apply the wrong indexed element to some of
the operations, and also index off the end of the vector.
You don't see this bug if the vector length is small enough that we
don't need to iterate the outer loop, i.e. if it is only 128 bits,
or if it is the 64-bit special case from AA32/AA64 AdvSIMD. If the
vector length is 256 bits then we calculate the right results for the
elements in the vector but do index off the end of the vector. Vector
lengths greater than 256 bits see wrong answers. The instructions
that produce 32-bit results behave correctly.
Fix the recalculation of 'segend' for subsequent iterations, and
restore a version of the comment that was lost in the refactor of
commit 7020ffd656 that explains why we only need to clamp segend to
opr_sz_n for the first iteration, not the later ones.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2595
Fixes: 7020ffd656 ("target/arm: Macroize helper_gvec_{s,u}dot_idx_{b,h}")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241101185544.2130972-1-peter.maydell@linaro.org
(cherry picked from commit e6b2fa1b81)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
divdu (without a dot) sometimes updates cr0, even though it shouldn't.
The reason is that gen_op_arith_divd() checks Rc(ctx->opcode), which is
not initialized. This field is initialized only for instructions that
go through decode_legacy(), and not decodetree.
There already was a similar issue fixed in commit 86e6202a57
("target/ppc: Make divw[u] handler method decodetree compatible.").
It's not immediately clear what else may access the uninitialized
ctx->opcode, so instead of playing whack-a-mole and changing the check
to compute_rc0, simply initialize ctx->opcode.
Cc: qemu-stable@nongnu.org
Fixes: 99082815f1 ("target/ppc: Add infrastructure for prefixed insns")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit c9b8a13a88)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
vcompress packs vl or less fields into vd, so the tail starts after the
last packed field. This could be more clearly expressed in the ISA,
but for now this thread helps to explain it:
https://github.com/riscv/riscv-v-spec/issues/796
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241030043538.939712-1-antonb@tenstorrent.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit c128d39ede)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The section 4.5.2 of the RISC-V AIA specification says that any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode.
If an interrupt is asserted before the driver configs its interrupt
type to APLIC, it's pending bit will not be set except a relevant
write to a setip or setipnum register. When we write the interrupt
type to sourcecfg register, if the APLIC device doesn't check
rectified input value and update the pending bit, this interrupt
might never becomes pending.
For APLIC.m, we can manully set pending by setip or setipnum
registers in driver. But for APLIC.w, the pending status totally
depends on the rectified input value, we can't control the pending
status via mmio registers. In this case, hw should check and update
pending status for us when writing sourcecfg registers.
Update QEMU emulation to handle "pre-existing" interrupts.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241004104649.13129-1-yongxuan.wang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 2ae6cca1d3)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in hw/intc/riscv_aplic.c)
The reads to in_clrip[x] registers return rectified input values of the
interrupt sources.
A rectified input value of an interrupt source is defined by the section
"4.5.2 Source configurations (sourcecfg[1]–sourcecfg[1023])" of the RISC-V
AIA specification as:
"rectified input value = (incoming wire value) XOR (source is inverted)"
Update the riscv_aplic_read_input_word() implementation to match the above.
Fixes: e8f79343cf ("hw/intc: Add RISC-V AIA APLIC device emulation")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240306095722.463296-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 0678e9f29c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The RISC-V unprivileged specification "31.3.11. State of Vector
Extension at Reset" has a note that recommends vtype.vill be set on
reset as part of ensuring that the vector extension have a consistent
state at reset.
This change now makes QEMU consistent with Spike which sets vtype.vill
on reset.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240930165258.72258-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit f8c1f36a2e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
According to PLIC specification (chapter 5), there
is only one case, when interrupt is claimed. Fix
PLIC controller to match this behavior.
Signed-off-by: Sergey Makarov <s.makarov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240918140229.124329-3-s.makarov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit a84be2baa9)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ensure that riscv_cpu_sxl returns MXL_RV32 when runningRV32 in an
RV64 QEMU.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Fixes: 05e6ca5e15 ("target/riscv: Ignore reserved bits in PTE for RV64")
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240919055048.562-4-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 929e4277c1)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The register VXSAT should be RW only to the first bit.
The remaining bits should be 0.
The RISC-V Instruction Set Manual Volume I: Unprivileged Architecture
The vxsat CSR has a single read-write least-significant bit (vxsat[0])
that indicates if a fixed-point instruction has had to saturate an output
value to fit into a destination format. Bits vxsat[XLEN-1:1]
should be written as zeros.
Signed-off-by: Evgenii Prokopiev <evgenii.prokopiev@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241002084436.89347-1-evgenii.prokopiev@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 5a60026cad)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
