Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Invert the 'no_sdcard' logic, renaming it as the more explicit
"auto_create_sdcard". Machines are supposed to create a SD Card
drive when this flag is set. In many cases it doesn't make much
sense (as boards don't expose SD Card host controller), but this
is patch only aims to expose that nonsense; so no logical change
intended (mechanical patch using gsed).
Most of the changes are:
- mc->no_sdcard = ON_OFF_AUTO_OFF;
+ mc->auto_create_sdcard = true;
Except in
. hw/core/null-machine.c
. hw/arm/xilinx_zynq.c
. hw/s390x/s390-virtio-ccw.c
where the disabled option is manually removed (since default):
- mc->no_sdcard = ON_OFF_AUTO_ON;
+ mc->auto_create_sdcard = false;
- mc->auto_create_sdcard = false;
and in system/vl.c we change the 'default_sdcard' type to boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-4-philmd@linaro.org>
Update MachineClass::no_sdcard default implicit AUTO
initialization to explicit OFF. This flag is consumed
in system/vl.c::qemu_disable_default_devices(). Use
this place to assert we don't have anymore AUTO state.
In hw/ppc/e500.c we add the ppce500_machine_class_init()
method to initialize once all the inherited classes.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20250204200934.65279-3-philmd@linaro.org>
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmdkzjgACgkQr3yVEwxT
gBOcyA//e0XhAQciQglCZZCfINdOyI8qSh+P2K0qtrXZ4VERHEMp7UoD5CQr2cZv
h8ij1EkatXCwukVELx0rNckxG33bEFgG1oESnQSrwGE0Iu4csNW24nK5WlUS0/r+
A5oD2wtzEF+cbhTKrVSDBN/PvlnWTKGEoJRkuXWfz5d4uR9eyQhfED0S2j36lNEC
X1x/OZoKM89XuXtOFe9g55Z5UNzAatcdTISozL0FydiPh7QeVjTLHh28/tt559MX
7v5aJFlQuZ78z1mIHkZmPSorSrJ0zqhkP6NWe1ae06oMgzwRQQhYLppDILV4ZgUF
3mSDRoXmBycQXiYNPcHep3LdXfvxr+PpWHSevx8gH1jwm93On7Y/H7Uol6TDXzfC
mrFjalfV5tzrD90ZvB+s5bCMF1q5Z8Dlj0pYF9aN9P1ILoWy3dndFAPJB6uKKDP7
Qd4qOQ3dVyHAX9jLmVkB6QvAV/vTDrYTsAxaF/EaoLOy0IoKhjTvgda3XzE1MFKA
gVafLluADIfSEdqa2QR2ExL8d1SZVoiObCp5TMLRer0HIpg/vQZwjfdbo4BgQKL3
7Q6wBxcZUNqrFgspXjm5WFIrdk2rfS/79OmvpNM6SZaK6BnklntdJHJHtAWujGsm
EM310AUFpHMp2h6Nqnemb3qr5l4d20KSt8DhoPAUq1IE59Kb8XY=
=0iQW
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu into staging
RISC-V PR for 10.0
* Correct the validness check of iova
* Fix APLIC in_clrip and clripnum write emulation
* Support riscv-iommu-sys device
* Add Tenstorrent Ascalon CPU
* Add AIA userspace irqchip_split support
* Add Microblaze V generic board
* Upgrade ACPI SPCR table to support SPCR table revision 4 format
* Remove tswap64() calls from HTIF
* Support 64-bit address of initrd
* Introduce svukte ISA extension
* Support ssstateen extension
* Support for RV64 Xiangshan Nanhu CPU
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmdkzjgACgkQr3yVEwxT
# gBOcyA//e0XhAQciQglCZZCfINdOyI8qSh+P2K0qtrXZ4VERHEMp7UoD5CQr2cZv
# h8ij1EkatXCwukVELx0rNckxG33bEFgG1oESnQSrwGE0Iu4csNW24nK5WlUS0/r+
# A5oD2wtzEF+cbhTKrVSDBN/PvlnWTKGEoJRkuXWfz5d4uR9eyQhfED0S2j36lNEC
# X1x/OZoKM89XuXtOFe9g55Z5UNzAatcdTISozL0FydiPh7QeVjTLHh28/tt559MX
# 7v5aJFlQuZ78z1mIHkZmPSorSrJ0zqhkP6NWe1ae06oMgzwRQQhYLppDILV4ZgUF
# 3mSDRoXmBycQXiYNPcHep3LdXfvxr+PpWHSevx8gH1jwm93On7Y/H7Uol6TDXzfC
# mrFjalfV5tzrD90ZvB+s5bCMF1q5Z8Dlj0pYF9aN9P1ILoWy3dndFAPJB6uKKDP7
# Qd4qOQ3dVyHAX9jLmVkB6QvAV/vTDrYTsAxaF/EaoLOy0IoKhjTvgda3XzE1MFKA
# gVafLluADIfSEdqa2QR2ExL8d1SZVoiObCp5TMLRer0HIpg/vQZwjfdbo4BgQKL3
# 7Q6wBxcZUNqrFgspXjm5WFIrdk2rfS/79OmvpNM6SZaK6BnklntdJHJHtAWujGsm
# EM310AUFpHMp2h6Nqnemb3qr5l4d20KSt8DhoPAUq1IE59Kb8XY=
# =0iQW
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 19 Dec 2024 20:54:00 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20241220' of https://github.com/alistair23/qemu: (39 commits)
target/riscv: add support for RV64 Xiangshan Nanhu CPU
target/riscv: add ssstateen
target/riscv/tcg: hide warn for named feats when disabling via priv_ver
target/riscv: Include missing headers in 'internals.h'
target/riscv: Include missing headers in 'vector_internals.h'
target/riscv: Check svukte is not enabled in RV32
target/riscv: Expose svukte ISA extension
target/riscv: Check memory access to meet svukte rule
target/riscv: Support hstatus[HUKTE] bit when svukte extension is enabled
target/riscv: Support senvcfg[UKTE] bit when svukte extension is enabled
target/riscv: Add svukte extension capability variable
hw/riscv: Add the checking if DTB overlaps to kernel or initrd
hw/riscv: Add a new struct RISCVBootInfo
hw/riscv: Support to load DTB after 3GB memory on 64-bit system.
hw/char/riscv_htif: Clarify MemoryRegionOps expect 32-bit accesses
hw/char/riscv_htif: Explicit little-endian implementation
MAINTAINERS: Cover RISC-V HTIF interface
tests/qtest/bios-tables-test: Update virt SPCR golden reference for RISC-V
hw/acpi: Upgrade ACPI SPCR table to support SPCR table revision 4 format
qtest: allow SPCR acpi table changes
...
Conflicts:
target/riscv/cpu.c
Merge conflict with DEFINE_PROP_END_OF_LIST() removal. No Property
array terminator is needed anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Add a new struct RISCVBootInfo to sync boot information between multiple
boot functions.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241120153935.24706-3-jim.shu@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Larger initrd image will overlap the DTB at 3GB address. Since 64-bit
system doesn't have 32-bit addressable issue, we just load DTB to the end
of dram in 64-bit system.
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241120153935.24706-2-jim.shu@sifive.com>
[ Changes by AF
- Store fdt_load_addr_hi32 in the reset vector
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that all of the Property arrays are counted, we can remove
the terminator object from each array. Update the assertions
in device_class_set_props to match.
With struct Property being 88 bytes, this was a rather large
form of terminator. Saves 30k from qemu-system-aarch64.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
RV32 OpenSBI need a fw_dynamic_info parameter with 32-bit fields instead
of target_ulong.
In RV64 QEMU, target_ulong is 64. So it is not right for booting RV32 OpenSBI.
We create a fw_dynmaic_info32 struct for this purpose.
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240919055048.562-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
=/zo4
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
# Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
# nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
# pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
# DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
# a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
# =/zo4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Oct 2024 21:04:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
qom: update object_resolve_path*() documentation
qom: set *ambiguous on all paths
qom: rename object_resolve_path_type() "ambiguousp"
target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
kvm: Allow kvm_arch_get/put_registers to accept Error**
accel/kvm: refactor dirty ring setup
minikconf: print error entirely on stderr
9p: remove 'proxy' filesystem backend driver
hw/char: Extract serial-mm
hw/char/serial.h: Extract serial-isa.h
hw: Remove unused inclusion of hw/char/serial.h
target/i386: Expose IBPB-BRTYPE and SBPB CPUID bits to the guest
kvm: refactor core virtual machine creation into its own function
kvm/i386: replace identity_base variable with a constant
kvm/i386: refactor kvm_arch_init and split it into smaller functions
kvm: replace fprintf with error_report()/printf() in kvm_init()
kvm/i386: fix return values of is_host_cpu_intel()
kvm/i386: make kvm_filter_msr() and related definitions private to kvm module
hw/i386/pc: Add a description for the i8042 property
tests/unit: remove block layer code from test-nested-aio-poll
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/Kconfig
# hw/arm/pxa2xx.c
When riscv_load_firmware() loads an ELF, the ELF segment addresses are
used, not the passed-in firmware_load_addr. The machine models assume
the firmware entry point is what they provided for firmware_load_addr,
and use that address to generate the boot ROM, so if the ELF is linked
at any other address, the boot ROM will jump to empty memory.
Pass back the ELF entry point to use when generating the boot ROM, so
the boot ROM can jump to firmware loaded anywhere in RAM. For example,
on the virt machine, this allows using an OpenSBI fw_dynamic.elf built
with FW_TEXT_START values other than 0x80000000.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240817002651.3209701-1-samuel.holland@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A few months ago I submitted a patch to various lists, deprecating
"riscv,isa" with a lengthy commit message [0] that is now commit
aeb71e42caae ("dt-bindings: riscv: deprecate riscv,isa") in the Linux
kernel tree. Primarily, the goal was to replace "riscv,isa" with a new
set of properties that allowed for strictly defining the meaning of
various extensions, where "riscv,isa" was tied to whatever definitions
inflicted upon us by the ISA manual, which have seen some variance over
time.
Two new properties were introduced: "riscv,isa-base" and
"riscv,isa-extensions". The former is a simple string to communicate the
base ISA implemented by a hart and the latter an array of strings used
to communicate the set of ISA extensions supported, per the definitions
of each substring in extensions.yaml [1]. A beneficial side effect was
also the ability to define vendor extensions in a more "official" way,
as the ISA manual and other RVI specifications only covered the format
for vendor extensions in the ISA string, but not the meaning of vendor
extensions, for obvious reasons.
Add support for setting these two new properties in the devicetrees for
the various devicetree platforms supported by QEMU for RISC-V. The Linux
kernel already supports parsing ISA extensions from these new
properties, and documenting them in the dt-binding is a requirement for
new extension detection being added to the kernel.
A side effect of the implementation is that the meaning for elements in
"riscv,isa" and in "riscv,isa-extensions" are now tied together as they
are constructed from the same source. The same applies to the ISA string
provided in ACPI tables, but there does not appear to be any strict
definitions of meanings in ACPI land either.
Link: https://lore.kernel.org/qemu-riscv/20230702-eats-scorebook-c951f170d29f@spud/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/extensions.yaml [1]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240124-unvarying-foothold-9dde2aaf95d4@spud>
[ Changes by AF:
- Rebase on recent changes
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
and replace the SDState::spi attribute with a test checking the
SDProto array of commands.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Move the dtb load bits outside of create_fdt(), and put it explicitly
in sifive_u_machine_init() and virt_machine_init(). With such change
create_fdt() does exactly what its function name tells us.
Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-2-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Launch qemu-system-riscv64 with a given dtb for 'sifive_u' and 'virt'
machines, QEMU complains:
qemu_fdt_add_subnode: Failed to create subnode /soc: FDT_ERR_EXISTS
The whole DT generation logic should be skipped when a given DTB is
present.
Fixes: b1f19f238c ("hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20230228074522.1845007-1-bmeng@tinylab.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The microchip_icicle_kit, sifive_u, spike and virt boards are now doing
the same steps when '-kernel' is used:
- execute load_kernel()
- load init_rd()
- write kernel_cmdline
Let's fold everything inside riscv_load_kernel() to avoid code
repetition. To not change the behavior of boards that aren't calling
riscv_load_init(), add an 'load_initrd' flag to riscv_load_kernel() and
allow these boards to opt out from initrd loading.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230206140022.2748401-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Next patch will move all calls to riscv_load_initrd() to
riscv_load_kernel(). Machines that want to load initrd will be able to
do via an extra flag to riscv_load_kernel().
This change will expose a sign-extend behavior that is happening in
load_elf_ram_sym() when running 32 bit guests [1]. This is currently
obscured by the fact that riscv_load_initrd() is using the return of
riscv_load_kernel(), defined as target_ulong, and this return type will
crop the higher 32 bits that would be padded with 1s by the sign
extension when running in 32 bit targets. The changes to be done will
force riscv_load_initrd() to use an uint64_t instead, exposing it to the
padding when dealing with 32 bit CPUs.
There is a discussion about whether load_elf_ram_sym() should or should
not sign extend the value returned by 'lowaddr'. What we can do is to
prevent the behavior change that the next patch will end up doing.
riscv_load_initrd() wasn't dealing with 64 bit kernel entries when
running 32 bit CPUs, and we want to keep it that way.
One way of doing it is to use target_ulong in 'kernel_entry' in
riscv_load_kernel() and rely on the fact that this var will not be sign
extended for 32 bit targets. Another way is to explictly clear the
higher 32 bits when running 32 bit CPUs for all possibilities of
kernel_entry.
We opted for the later. This will allow us to be clear about the design
choices made in the function, while also allowing us to add a small
comment about what load_elf_ram_sym() is doing. With this change, the
consolation patch can do its job without worrying about unintended
behavioral changes.
[1] https://lists.gnu.org/archive/html/qemu-devel/2023-01/msg02281.html
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230206140022.2748401-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
As it is now, riscv_compute_fdt_addr() is receiving a dram_base, a
mem_size (which is defaulted to MachineState::ram_size in all boards)
and the FDT pointer. And it makes a very important assumption: the DRAM
interval dram_base + mem_size is contiguous. This is indeed the case for
most boards that use a FDT.
The Icicle Kit board works with 2 distinct RAM banks that are separated
by a gap. We have a lower bank with 1GiB size, a gap follows, then at
64GiB the high memory starts. MachineClass::default_ram_size for this
board is set to 1.5Gb, and machine_init() is enforcing it as minimal RAM
size, meaning that there we'll always have at least 512 MiB in the Hi
RAM area.
Using riscv_compute_fdt_addr() in this board is weird because not only
the board has sparse RAM, and it's calling it using the base address of
the Lo RAM area, but it's also using a mem_size that we have guarantees
that it will go up to the Hi RAM. All the function assumptions doesn't
work for this board.
In fact, what makes the function works at all in this case is a
coincidence. Commit 1a475d39ef introduced a 3GB boundary for the FDT,
down from 4Gb, that is enforced if dram_base is lower than 3072 MiB. For
the Icicle Kit board, memmap[MICROCHIP_PFSOC_DRAM_LO].base is 0x80000000
(2 Gb) and it has a 1Gb size, so it will fall in the conditions to put
the FDT under a 3Gb address, which happens to be exactly at the end of
DRAM_LO. If the base address of the Lo area started later than 3Gb this
function would be unusable by the board. Changing any assumptions inside
riscv_compute_fdt_addr() can also break it by accident as well.
Let's change riscv_compute_fdt_addr() semantics to be appropriate to the
Icicle Kit board and for future boards that might have sparse RAM
topologies to worry about:
- relieve the condition that the dram_base + mem_size area is contiguous,
since this is already not the case today;
- receive an extra 'dram_size' size attribute that refers to a contiguous
RAM block that the board wants the FDT to reside on.
Together with 'mem_size' and 'fdt', which are now now being consumed by a
MachineState pointer, we're able to make clear assumptions based on the
DRAM block and total mem_size available to ensure that the FDT will be put
in a valid RAM address.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230201171212.1219375-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A common trend in other archs is to calculate the fdt address, which is
usually straightforward, and then calling a function that loads the
fdt/dtb by using that address.
riscv_load_fdt() is doing a bit too much in comparison. It's calculating
the fdt address via an elaborated heuristic to put the FDT at the bottom
of DRAM, and "bottom of DRAM" will vary across boards and
configurations, then it's actually loading the fdt, and finally it's
returning the fdt address used to the caller.
Reduce the existing complexity of riscv_load_fdt() by splitting its code
into a new function, riscv_compute_fdt_addr(), that will take care of
all fdt address logic. riscv_load_fdt() can then be a simple function
that just loads a fdt at the given fdt address.
We're also taken the opportunity to clarify the intentions and
assumptions made by these functions. riscv_load_fdt() is now receiving a
hwaddr as fdt_addr because there is no restriction of having to load the
fdt in higher addresses that doesn't fit in an uint32_t.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230201171212.1219375-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'cmdline' isn't being used. Remove it.
A MachineState pointer is being retrieved via a MACHINE() macro calling
qdev_get_machine(). Use MACHINE(s) instead to avoid calling qdev().
'mem_size' is being set as machine->ram_size by the caller. Retrieve it
via ms->ram_size.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230111170948.316276-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All callers are using kernel_filename as machine->kernel_filename.
This will also simplify the changes in riscv_load_kernel() that we're
going to do next.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'filename', 'mem_size' and 'fdt' from riscv_load_initrd() can all be
retrieved by the MachineState object for all callers.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The sifive_u, spike and virt machines are writing the 'bootargs' FDT
node during their respective create_fdt().
Given that bootargs is written only when '-append' is used, and this
option is only allowed with the '-kernel' option, which in turn is
already being check before executing riscv_load_kernel(), write
'bootargs' in the same code path as riscv_load_kernel().
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
riscv_load_initrd() returns the initrd end addr while also writing a
'start' var to mark the addr start. These informations are being used
just to write the initrd FDT node. Every existing caller of
riscv_load_initrd() is writing the FDT in the same manner.
We can simplify things by writing the FDT inside riscv_load_initrd(),
sparing callers from having to manage start/end addrs to write the FDT
themselves.
An 'if (fdt)' check is already inserted at the end of the function
because we'll end up using it later on with other boards that doesn´t
have a FDT.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230102115241.25733-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The MachineState object provides a 'fdt' pointer that is already being
used by other RISC-V machines, and it's also used by the 'dumpdtb' QMP
command.
Remove the 'fdt' pointer from SiFiveUState and use MachineState::fdt
instead.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20230102115241.25733-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some boards are duplicating the 'riscv_find_and_load_firmware' call
because the 32 and 64 bits images have different names. Create
a function to handle this detail instead of hardcoding it in the boards.
Ideally we would bake this logic inside riscv_find_and_load_firmware(),
or even create a riscv_load_default_firmware(), but at this moment we
cannot infer whether the machine is running 32 or 64 bits without
accessing RISCVHartArrayState, which in turn can't be accessed via the
common code from boot.c. In the end we would exchange 'firmware_name'
for a flag with riscv_is_32bit(), which isn't much better than what we
already have today.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Message-Id: <20221221182300.307900-6-dbarboza@ventanamicro.com>
Message-Id: <20221229091828.1945072-11-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present magic number is used to create "riscv,ndev" property
in the dtb. Let's use the macro SIFIVE_U_PLIC_NUM_SOURCES that
is used to instantiate the PLIC model instead.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221211030829.802437-12-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This will enable support for 'dumpdtb' QMP/HMP command for the sifive_u
machine.
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220926173855.1159396-15-danielhb413@gmail.com>
The QOM API already provides accessors for uint32 values, so reuse them.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220301225220.239065-3-shentey@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If specified CPU configuration is not valid, not just it prints error
message, it aborts and generates core dumps (depends on the operating
system). This kind of error handling should be used only when a serious
runtime error occurs.
This commit makes error handling on CPU configuration more generous on
sifive_e/u and opentitan machines. It now just prints error message and
quits (without coredumps and aborts).
This is separate from spike/virt because it involves different type
(TYPE_RISCV_HART_ARRAY) on sifive_e/u and opentitan machines.
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <09e61e58a7543da44bdb0e0f5368afc8903b4aa6.1652509778.git.research_trasio@irq.a4lg.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 7c28f4da20 ("RISC-V: Don't add NULL bootargs to device-tree")
tried to avoid adding *NULL* bootargs to device tree, but unfortunately
the changes were entirely useless, due to MachineState::kernel_cmdline
can't be NULL at all as the default value is given as an empty string.
(see hw/core/machine.c::machine_initfn()).
Note the wording of *NULL* bootargs is wrong. It can't be NULL otherwise
a segfault had already been observed by dereferencing the NULL pointer.
It should be worded as *empty" bootargs.
Fixes: 7c28f4da20 ("RISC-V: Don't add NULL bootargs to device-tree")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421055629.1177285-2-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When realising the SoC use error_fatal instead of error_abort as the
process can fail and report useful information to the user.
Currently a user can see this:
$ ../qemu/bld/qemu-system-riscv64 -M sifive_u -S -monitor stdio -display none -drive if=pflash
QEMU 6.1.93 monitor - type 'help' for more information
(qemu) Unexpected error in sifive_u_otp_realize() at ../hw/misc/sifive_u_otp.c:229:
qemu-system-riscv64: OTP drive size < 16K
Aborted (core dumped)
Which this patch addresses
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-8-alistair.francis@opensource.wdc.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
A number of machines connect just one backend with drive_get_next().
Change them to use drive_get() directly. This makes the (zero) unit
number explicit in the code.
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Cc: Niek Linnenbank <nieklinnenbank@gmail.com>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: qemu-arm@nongnu.org
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-3-armbru@redhat.com>
ssi_sd_realize() creates an "sd-card" device. This is inappropriate,
and marked FIXME.
Move it to the boards that create these devices. Prior art: commit
eb4f566bbb for device "generic-sdhci", and commit 26c607b86b for
device "pl181".
The device remains not user-creatable, because its users should (and
do) wire up its GPIO chip-select line.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: qemu-arm@nongnu.org
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-3-alistair.francis@opensource.wdc.com
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211020014112.7336-6-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V ACLINT is more modular and backward compatible with
original SiFive CLINT so instead of duplicating the original
SiFive CLINT implementation we upgrade the current SiFive CLINT
implementation to RISC-V ACLINT implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210831110603.338681-3-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We will be upgrading SiFive CLINT implementation into RISC-V ACLINT
implementation so let's first rename the sources.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20210831110603.338681-2-anup.patel@wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V
CPU GPIO lines to set the external MIP bits.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 0364190bfa935058a845c0fa1ecf650328840ad5.1630301632.git.alistair.francis@wdc.com
arch_init.h only defines the QEMU_ARCH_* enumeration and the
arch_type global. Don't include it in files that don't use those.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210730105947.28215-8-peter.maydell@linaro.org
Currently the firmware dynamic info (fw_dyn) is put right after
the reset vector, which is not 8-byte aligned on RV64. OpenSBI
fw_dynamic uses ld to read contents from 'struct fw_dynamic_info',
which expects fw_dyn to be on the 8-byte boundary, otherwise the
misaligned load exception may happen. Fortunately this does not
cause any issue on QEMU, as QEMU does support misaligned load.
RV32 does not have any issue as it is 4-byte aligned already.
Change to make sure it is 8-byte aligned which works for both
RV32 and RV64.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210708143319.10441-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the CLINT timebase frequency is set to 10MHz on sifive_u,
but on the real hardware the timebase frequency is 1Mhz.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210706102616.1922469-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The OpenSBI BIOS image names are used by many RISC-V machines.
Let's define macros for them.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The official DT bindings of PLIC uses "sifive,plic-1.0.0" as the
compatible string in the upstream Linux kernel. "riscv,plic0" is
now legacy and has to be kept for backward compatibility of legacy
systems.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings")
adds the official DT bindings for CLINT, which uses "sifive,clint0"
as the compatible string. "riscv,clint0" is now legacy and has to
be kept for backward compatibility of legacy systems.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210430071302.1489082-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
