The Svrsw60t59b extension allows to free the PTE reserved bits 60 and 59
for software to use.
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Nutty Liu<liujingqi@lanxincomputing.com>
Message-ID: <20250702-dev-alex-svrsw60b59b_v2-v2-1-504ddf0f8530@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This implementation provides emulation for the Xiangshan Kunminghu
FPGA prototype platform, including support for UART, CLINT, IMSIC,
and APLIC devices. More details can be found at
https://github.com/OpenXiangShan/XiangShan
Signed-off-by: qinshaoqing <qinshaoqing@bosc.ac.cn>
Signed-off-by: Yang Wang <wangyang@bosc.ac.cn>
Signed-off-by: Yu Hu <819258943@qq.com>
Signed-off-by: Ran Wang <wangran@bosc.ac.cn>
Signed-off-by: Borong Huang <3543977024@qq.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250617074222.17618-1-wangran@bosc.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-13-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-12-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-11-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-10-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-9-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-8-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-7-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-6-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-5-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-4-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The current device tree property uses two cells for the address (and for
the size), but assumes the they are less than 32 bits by hard coding the
high cell to zero.
Use qemu_fdt_setprop_sized_cells to do the job of splitting the upper
and lower 32 bits across cells.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-3-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The address is a hardware address, so use hwaddr for consistency with
the rest of the machine.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250604025450.85327-2-joel@jms.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The original implementation incorrectly performed a bitwise AND
operation between the PPN of iova and PPN Mask, leading to an
incorrect PPN field in Translation-reponse register.
The PPN of iova should be set entirely in the PPN field of
Translation-reponse register.
Also remove the code that was used to clear S field since this
field is already zero.
Signed-off-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Message-ID: <20250605124848.1248-1-liujingqi@lanxincomputing.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISCVIOMMUPciClass and RISCVIOMMUSysClass are defined with missed
parent class, class_init on them may corrupt their parent class
fields.
It's lucky that parent_realize and parent_phases are not initialized
or used until now, so just remove the definitions. They can be added
back when really necessary.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250606092406.229833-6-zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Prepare for adding more fields to RISCVCPUDef and reading them in
riscv_cpu_init: instead of storing the misa_mxl_max field in
RISCVCPUClass, ensure that there's always a valid RISCVCPUDef struct
and go through it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Almost all users of cpu->cfg.satp_mode care about the "max" value
satp_mode_max_from_map(cpu->cfg.satp_mode.map). Convert the QOM
properties back into it. For TCG, deduce the bitmap of supported modes
from valid_vm[].
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not create the RHCT MMU type entry for RV32 CPUs, since it
only has definitions for SV39/SV48/SV57. Likewise, check that
satp_mode_max_from_map() will actually return a valid value, skipping
the MMU type entry if all MMU types were disabled on the command line.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can avoid the 'long' casts by using PRIx64 and HWADDR_PRIx on the fmt
strings for uint64_t and hwaddr types.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Change create_fdt_pcie(), create_fdt_reset(), create_fdt_uart() and
create_fdt_rtc() to use s->memmap in their logic.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt_virtio() can use s->memmap instead of having an extra
argument for it.
While we're at it rewrite it a little bit to avoid the clunky line in
'name' and code repetition:
- declare 'virtio_base' out of the loop since it never changes;
- declare a 'size' variable. Use it to calculate the address of the
virtio device in an 'addr' variable;
- use 'addr' in the 'name' g_strdup_printf();
- use 'addr' and 'size' when creating the 'reg' property.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt_sockets() and all its fdt helpers (create_fdt_socket_aplic(),
create_fdt_imsic(), create_fdt_socket_plic(), create_fdt_socket_aclint()
and create_fdt_socket_memory()) can use s->memmap from their
RISCVVirtState pointer instead of having an extra memmap argument.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
create_fdt(), create_fdt_flash() and create_fdt_fw_cfg() can access the
memmap via their RISCVVirtState pointers.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function can receive the value via s->memmap[VIRT_FW_CFG].base from
the caller, avoiding the use of virt_memmap.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We should use s->memmap instead of virt_memmap to be able to use an
updated memmap when we start versioning the board.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250429125811.224803-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Throughout the code we're accessing the board memmap, most of the time,
by accessing it statically via 'virt_memmap'. This static map is also
assigned in the machine state in s->memmap.
We're also passing it as a variable to some fdt functions, which is
unorthodox since we can spare a function argument by accessing it
statically or via the machine state.
All the current forms are valid but not all of the are scalable. In the
future we will version this board, and then all this code will need
rework because it should point to the updated memmap. In this case,
we'll want to assign the adequate versioned memmap once during init,
in s->memmap like it is being done today, and the rest of the code
will access the updated map via s->memmap.
We're also enforcing the pattern of using s->memmap instead of assigning
it to a temp variable 'memmap'. Code is copy/pasted around all the time
and being consistent is important.
We'll start these rather mechanical changes with virt_machine_init().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20250429125811.224803-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250425152311.804338-5-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
qtest_set_command_cb passed to g_once should match GThreadFunc,
which it does not. But using g_once is actually unnecessary,
because the function is called by riscv_harts_realize() under
the Big QEMU Lock.
Reported-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Kohei Tokunaga <ktokunaga.mail@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250410161722.595634-1-pbonzini@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Cc: qemu-stable@nongnu.org
This property enables the setting of the CLINT timebase frequency
through the command line, for example:
-machine microchip-icicle-kit,clint-timebase-frequency=10000000
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250319061342.26435-6-sebastian.huber@embedded-brains.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Further customize the -bios and -kernel options behaviour for the
microchip-icicle-kit machine. If "-bios none -kernel filename" is
specified, then do not load a firmware and instead only load and start
the kernel image.
For test runs, use an approach similar to
riscv_find_and_load_firmware().
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250319061342.26435-5-sebastian.huber@embedded-brains.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Real-time kernels such as RTEMS or Zephyr may use a static device tree
built into the kernel image. Do not require to use the -dtb option if
-kernel is used for the microchip-icicle-kit machine. Issue a warning
if no device tree is provided by the user since the machine does not
generate one.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250319061342.26435-4-sebastian.huber@embedded-brains.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the kernel entry is in the high DRAM area, place the FDT into this
area.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250319061342.26435-3-sebastian.huber@embedded-brains.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V IO Mapping Table (RIMT) is a new static ACPI table used to
communicate IOMMU information to the OS. Add support for creating this
table when the IOMMU is present. The specification is frozen and
available at [1].
[1] - https://github.com/riscv-non-isa/riscv-acpi-rimt/releases/download/v0.99/rimt-spec.pdf
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250322043139.2003479-3-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the IOMMU is implemented as a PCI device, its BDF is created
locally in virt.c. However, the same BDF is also required in
virt-acpi-build.c to support ACPI. Therefore, make this information part
of the global RISCVVirtState structure so that it can be accessed
outside of virt.c as well.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250322043139.2003479-2-sunilvl@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"exec/exec-all.h" is now fully empty, let's remove it.
Mechanical change running:
$ sed -i '/exec\/exec-all.h/d' $(git grep -wl exec/exec-all.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250424202412.91612-14-philmd@linaro.org>
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
Coccinelle's indentation of virt_create_plic() results in a long line.
Avoid that by mimicking the old indentation manually.
Don't touch tests/tcg/mips/user/. I'm not sure these files are ours
to make style cleanups on. They might be imported third-party code,
which we should leave as is to not complicate future updates.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the device being added to riscv virt VMs.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20250319141159.1461621-5-kraxel@redhat.com>
The PPN field in a non-leaf PDT entry is positioned differently from that
in a leaf PDT entry. The original implementation incorrectly used the leaf
entry's PPN mask to extract the PPN from a non-leaf entry, leading to an
erroneous page table walk.
This commit introduces new macros to properly define the fields for
non-leaf PDT entries and corrects the page table walk.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250301173751.9446-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a handful of trace events to allow for an easier time debugging the
HPM feature.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250224190826.1858473-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that we have every piece in place we can advertise CAP_HTM to
software, allowing any HPM aware driver to make use of the counters.
HPM is enabled/disabled via the 'hpm-counters' attribute. Default value
is 31, max value is also 31. Setting it to zero will disable HPM
support.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250224190826.1858473-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To support hpm events mmio writes, done via
riscv_iommu_process_hpmevt_write(), we're also adding the 'hpm-counters'
IOMMU property that are used to determine the amount of counters
available in the IOMMU.
Note that everything we did so far didn't change any IOMMU behavior
because we're still not advertising HPM capability to software. This
will be done in the next patch.
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250224190826.1858473-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISCV_IOMMU_REG_IOHPMCYCLES writes are done by
riscv_iommu_process_hpmcycle_write(), called by the mmio write callback
via riscv_iommu_process_hpm_writes().
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250224190826.1858473-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
