* Introduced a new command-line argument `--vendor` to process images from a specific vendor subfolder.
* Enhanced error handling to check for the existence of the vendor path and list available vendors if the path does not exist.
* Updated help documentation to reflect the new functionality.
This change improves the script's usability for users managing multiple vendor-specific cover images.
* Auto generate CMAKE_PREFIX_PATH/DESTDIR
* Auto set CMAKE_INSTALL_PREFIX
* Always default SLIC3R_STATIC to on
* Only allow one value for CMAKE_OSX_ARCHITECTURES
* Set arch for OpenSSL from CMAKE_OSX_ARCHITECTURES
* Set CMAKE_INSTALL_RPATH from CMAKE_PREFIX_PATH
* Default CMAKE_MACOSX_RPATH and CMAKE_MACOSX_BUNDLE to on
* Auto set BBL_RELEASE_TO_PUBLIC based on build config
* Default to GTK 3
* Fix linux debug build
Update find modules to also look for the debug variant of the libraries
* Set DEP_DEBUG and ORCA_INCLUDE_DEBUG_INFO based on CMAKE_BUILD_TYPE
* Add a fallback value for Windows SDK if the env variables are not set
* Reflect CMake changes in the build scripts
* Add missing line
* Fix auto setting DEP_DEBUG and ORCA_INCLUDE_DEBUG_INFO
* Update dep folder name for linux in GH actions
* Invert dep-folder-name conditions
`''` is considered a falsy value, which was causing the value to always be set to 'OrcaSlicer_dep'
* Properly handle finding the debug version of libnoise
* Convert FindNLopt.cmake to a config mode wrapper
* Use separate build directory for debug builds on Linux
* Move find_package for libnoise
* Cleanup and improve linux build script
- Add dry run
- Add build in RelWithDebInfo
- Add function to print and run commands
* Remove linux destdir deprecation and cleanup
* Fix flatpak build
* Disable fail fast for flatpak builds
* Flatpak improvements
- Build wxWidgets using deps cmake
- Improve handling of space freeing commands while building deps
- Allow cmake to directly download deps
- Set needed flags within cmake instead of the build manifest
* Print clean build commands
* Implement shellcheck recommendations
* Cleanup
* Fix CMakeLists.txt syntax by replacing empty elseif with else statement
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Updated multiple filament profiles to convert fields such as filament_cost, filament_density, and filament_max_volumetric_speed from single values to arrays for consistency. Removed unnecessary fields from filament profiles to streamline data structure. This change enhances compatibility with the updated profile handling logic in the orca_filament_lib.py script.
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* change machine_gcode
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add Vietnamese localization file for OrcaSlicer
* add Vietnamese po file
* Add Vietnamese language support in GUI (#11000)
- Added Vietnamese (vi_VN) to the language mapping in GUI_App.cpp.
- Updated Preferences.cpp to include Vietnamese in the language combobox and display its name in Vietnamese (Tiếng Việt).
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
# Change FillTpmsFK.cpp to use MarchingSquares.hpp.
This is still a work in progress, but it does seem to work fine, and I
thought I'd put this up there for people to have a play with. I also
have a few questions because I'm not 100% familiar with the rest of the
codebase and I'm going to use the review of this to figure a few things
out.
This builds on #10747 which simplified and significantly optimized
MarchingSquares.hpp by replacing most of FillTpmsFK.cpp's implementation
to just use that marching squares implementation instead of
re-implementing it's own.
I don't yet have any solid speed comparisons but it feels a bit
subjectively faster, though I think that most of the delay in previewing
the slicing results is not in the fill-generation so it's a bit hard to
tell. I don't know if there are any tests/benchmarks/etc that I could
use for testing this, but I'm probably going to add some to this PR at
some point.
Even if this doesn't give a significant speed-up, it does significantly
simplify the code and make it easier to re-use for other equation based
fill-patterns. This could re-implement gyroid or TpmsD with about 5
lines of C code to inherit from `ScalarField` and redefine the `float
get_scalar(coordf_t x, coordf_t y, coordf_t z)` function with the
appropriate equation.
I don't think it would be faster than the current gyroid or TpmsD fills
though, since they directly generate a single line using the equation
and then just copy and shift it. However, it might not be much slower
and it would simplify the code to do them all the same way.
But the main reason I'm doing this is this can be used to implement far
more complicated fills that can't really be implemented any other way.
In particular I'm working towards a gyroid fill that dynamically varies
it's density based on how close it is to the walls.
I have a bunch of questions about some of the other bits that I'll post
as comments against the review-diff.
# Screenshots/Recordings/Graphs
I'll add some when I get there... but so far the results look identical
to the previous implementation even when I zoom in close.
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
Ported part skip from BambuStudio. Thanks bambulab!
<img width="1350" height="902" alt="image"
src="https://github.com/user-attachments/assets/d7f89950-3420-4ea5-bbb6-e53c875e7422"
/>
Haven't fully tested yet!
### Minimum Firmware Requirements (from BambuStudio release page):
- **X1C**: v01.09.02.12 or later
- **H2D**: v01.02.00.00 or later
- **Other models**: Currently not supported. Feature support coming in
future firmware updates.
> ⚠️ Make sure your printer firmware is up to date to use this feature.
This new feature allows users to override flow ratios for the following extrusion path types:
* First layer (excluding Brims and Skirts)
* Outer walls
* Inner walls
* Overhang perimeters
* Sparse infill
* Internal solid infill
* Gap fill
* Support
* Support interfaces
Fixes#11082
Slicing is going to the endless loop when the `Base pattern spacing` value is 0 for `Tree Slim` support.
Co-authored-by: SoftFever <softfeverever@gmail.com>
