mirror of
https://github.com/SoftFever/OrcaSlicer.git
synced 2026-01-26 23:17:37 -07:00
change machine gcode (#11136)
* The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed
* Revert "The 0.30mm layer height configuration for the 0.4 nozzle of the QIDI model has been removed"
This reverts commit 8d296720b8.
* Update Qidi Q2 0.4 nozzle.json
修改Q2打印高度
* change machine_gcode
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
This commit is contained in:
HYzd766
GitHub
parent
ff0507e5a3
commit
9d69d37c5a
3 changed files with 8 additions and 5 deletions
|
|
@ -13,7 +13,11 @@
|
|||
"bed_exclude_area": [
|
||||
"0x0,11x0,11x16,0x16"
|
||||
],
|
||||
"change_filament_gcode": "G1 Z{max_layer_z + 3.0} F1200\nTOOL_CHANGE_START F=[current_extruder] T=[next_extruder]\nDISABLE_ALL_SENSOR\n{if long_retractions_when_cut[previous_extruder]}\nMOVE_TO_TRASH\nG1 E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM400\n{endif}\nCUT_FILAMENT T=[current_extruder]\nMOVE_TO_TRASH\nM106 S25\nM106 P2 S0\nUNLOAD_T[current_extruder]\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nM104 S{nozzle_temperature_range_high[current_extruder]}\n{else}\nM104 S{nozzle_temperature_range_high[next_extruder]}\n{endif}\nT[next_extruder]\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nSET_HEATER_TEMPERATURE HEATER=extruder TARGET={nozzle_temperature_range_high[current_extruder]} WAIT=1\n{else}\nSET_HEATER_TEMPERATURE HEATER=extruder TARGET={nozzle_temperature_range_high[next_extruder]} WAIT=1\n{endif}\n; FLUSH_START\nG1 E15 F900\nG1 E30 F300\n; FLUSH_END\n{if long_retractions_when_cut[previous_extruder]}\nG1 E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{endif}\n{if flush_length_1 > 1}\n; FLUSH_START\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\nG1 E-[old_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 E[old_retract_length_toolchange] F300\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_3 > 1}\nG1 X88 F9000\n; FLUSH_START\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\nM400\nM106 S255\nM104 S[new_filament_temp]\nG1 X89 F60\nG1 X85 F60\nG1 X89 F60\nM109 S[new_filament_temp]\nCLEAR_OOZE\nTOOL_CHANGE_END\nG1 Y270 F5000\nM106 S0\nENABLE_ALL_SENSOR",
|
||||
"cooling_tube_retraction": "0",
|
||||
"cooling_tube_length": "0",
|
||||
"parking_pos_retraction": "0",
|
||||
"extra_loading_move": "5",
|
||||
"change_filament_gcode": "G1 Z{max_layer_z + 3.0} F1200\nTOOL_CHANGE_START F=[current_extruder] T=[next_extruder]\nBUFFER_MONITORING ENABLE=0\nDISABLE_ALL_SENSOR\nM106 S255\nMOVE_TO_TRASH\n{if long_retractions_when_cut[previous_extruder]}\nG1 E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nG1 E-10 F{old_filament_e_feedrate}\n{endif}\nM400\nCUT_FILAMENT T=[current_extruder]\nMOVE_TO_TRASH\nM106 P2 S0\nUNLOAD_T[current_extruder]\nT[next_extruder]\n{if nozzle_temperature_range_high[current_extruder] >= nozzle_temperature_range_high[next_extruder]}\nM104 S{nozzle_temperature_range_high[current_extruder]}\n{else}\nM104 S{nozzle_temperature_range_high[next_extruder]}\n{endif}\n; FLUSH_START\nM106 S25\nG1 E30 F300\n; FLUSH_END\n{if long_retractions_when_cut[previous_extruder]}\nG1 E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{endif}\n{if flush_length_1 > 1}\n; FLUSH_START\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\nG1 E-[old_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_2 > 1}\n; FLUSH_START\nG1 X92 F9000\nG1 E[old_retract_length_toolchange] F300\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_3 > 1}\n; FLUSH_START\nG1 X85 F9000\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\n{if flush_length_4 > 1}\n; FLUSH_START\nG1 X92 F9000\nG1 E[new_retract_length_toolchange] F300\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E-[new_retract_length_toolchange] F1800\n; FLUSH_END\n{endif}\nM400\nM106 S255\nM104 S[new_filament_temp]\nINIT_SYNC_BUFFER_STATE\nBUFFER_MONITORING ENABLE=1\nG1 E10 F25 \nM109 S[new_filament_temp]\nG1 E-5 F1800\nCLEAR_OOZE\nTOOL_CHANGE_END\nG1 Y270 F8000\nM106 S0\nG1 E2 F1800\nENABLE_ALL_SENSOR\n",
|
||||
"default_filament_profile": [
|
||||
"QIDI PLA Rapido @Qidi Q2 0.4 nozzle"
|
||||
],
|
||||
|
|
@ -25,7 +29,7 @@
|
|||
"is_support_timelapse": "1",
|
||||
"is_support_multi_box": "1",
|
||||
"layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y235 F20000\nG1 X97 F20000\n{if layer_z <=25}\nG1 Z25\n{endif}\nG1 Y254 F2000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 E[retraction_length] F300\nG1 X85 F2000\nG1 X97 F2000\nG1 Y220 F2000\n{if layer_z <=25}\nG1 Z[layer_z]\n{endif}\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_end_gcode": "DISABLE_BOX_HEATER\nM141 S0\nM140 S0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y270 F12000\nG0 X90 Y270 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0",
|
||||
"machine_end_gcode": "DISABLE_BOX_HEATER\nM141 S0\nM140 S0\nBUFFER_MONITORING ENABLE=0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y270 F12000\nG0 X90 Y270 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0",
|
||||
"machine_load_filament_time": "35",
|
||||
"machine_max_jerk_e": [
|
||||
"4"
|
||||
|
|
@ -43,7 +47,7 @@
|
|||
"20"
|
||||
],
|
||||
"machine_pause_gcode": "M0",
|
||||
"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG1 X108.000 Y1 F30000\nG0 Z[initial_layer_print_height] F600\n;G1 E3 F1800\nG90\nM83\nG0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 X108.000 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nM83\nG0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 Z1 F600",
|
||||
"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG1 X108.000 Y1 F30000\nG0 Z[initial_layer_print_height] F600\n;G1 E3 F1800\nG90\nM83\nG0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 X108.000 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nM83\nG0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 Z1 F600",
|
||||
"machine_unload_filament_time": "35",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
|
|
|
|||
|
|
@ -93,7 +93,7 @@
|
|||
"layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y304 F20000\nG1 X95 F20000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 Y324 F5000\nG1 E[retraction_length] F300\nG1 X65 F5000\nG1 Y290 F20000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
|
||||
"machine_end_gcode": "DISABLE_BOX_HEATER\nM141 S0\nM140 S0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y290 F12000\nG0 X90 Y290 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0",
|
||||
"time_lapse_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y304 F20000\nG1 X95 F20000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 Y324 F5000\nG1 E[retraction_length] F300\nG1 X65 F5000\nG1 Y290 F20000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}",
|
||||
"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG0 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0] - 12, first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1",
|
||||
"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG0 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0] - 12, first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1",
|
||||
"thumbnails_format": "PNG",
|
||||
"default_filament_profile": [
|
||||
"Qidi Generic PLA @Qidi X-Plus 4 0.4 nozzle"
|
||||
|
|
|
|||
|
|
@ -116,6 +116,5 @@
|
|||
"initial_layer_travel_speed": "50%",
|
||||
"filter_out_gap_fill": "2",
|
||||
"small_perimeter_threshold": "4",
|
||||
"notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART \n\n[gcode_macro M191]\ngcode:\n {% set s = params.S|float %}\n {% if s == 0 %}\n # If target temperature is 0, do nothing\n M117 Chamber heating cancelled\n {% else %}\n SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}\n # Orca: uncomment the following line if you want to use heat bed to assist chamber heating\n M140 S90\n TEMPERATURE_WAIT SENSOR=\"heater_generic chamber_heater\" MINIMUM={s-1} MAXIMUM={s+1}\n M117 Chamber at target temperature\n {% endif %}",
|
||||
"exclude_object": "1"
|
||||
}
|
||||
Loading…
Add table
Add a link
Reference in a new issue