* Add "Manual filament change" option and logic
* make suggested changes
* make suggested changes
* change tag from "CHANGE_TOOL" to "MANUAL_TOOL_CHANGE"
* some tweaks
* More fixes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
* Change direction for perimeter extrusion at odd layers.
Initial test code based on supermerill/SuperSlicer@87245ae3c1
* Perimeters for both contours and holes can have alternating direction, to support overhangs on both side.
Also fixes wipe on loop.
* Only reverse order if the loops have steep overhang
* Support a special case that treat every layer as steep overhang
* Add options
* Disable overhang reverse if vase mode is enabled
* Allow extrusion reversal and skip overhang detection if fuzzy skin
---------
Co-authored-by: supermerill <merill@free.fr>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Initial port of the new ensure vertical thickness algorithm from PrusaSlicer.
Based on prusa3d/PrusaSlicer@1a0d8f5130
* Remove code related to "Detect narrow internal solid infill" as it's handled by the new ensuring code
* Support different internal solid infill pattern
* Ignore removed options
---------
Co-authored-by: Pavel Mikuš <pavel.mikus.mail@seznam.cz>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add needed src files and update CMake files
* Implementation of GCodeThumbnailsFormat for PNG, JPG, and QOI complete
* Implement BIQU (Big Tree Tech) Thumbnail Format
* have GCodeProcessor.post_process pass through original line end characters
* fix biqu thumbnail output
use \r\n for new lines in the biqu thumbnail portion. the firmware requires these end characters to function properly.
update names of variables and add comments to be more descriptive
replace modified Qt pixel algorithm with much simpler algorithm from BTT TFT firmware
* rename BiQU to BTT_TFT for better clarity
* remove underscore from GUI option
---------
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
1. refine some tip
2. alert when bed temperture greq than softening temperature
jira: STUDIO-4532
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib9623553a40825015744783f30c6e439827a49c6
* Remove BambuLab's implementation of solid infill bridging enhancement
, will use Prusa's instead
* Port "Extend sparse infill" from Prusa
* Improve anchoring by shifting the lines half-spacing
* Add missing fill patterns
* Improve anchoring by keeping fine details
* Make sure the opposite directions do not cancel each other
---------
Co-authored-by: Pavel Mikus <pavel.mikus.mail@seznam.cz>
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
* Initial commit of code from Prusa Slicer 2.6.1
* Ported ExtrusionRole from Prusa Slicer 2.6.1
* fix compile errors
* Update GCode.hpp
* code changes to invoke pressure equalizer
* attempting to trigger pressure equalizer
(Not compiling)
* Update Fill.cpp
* Update Fill.cpp
* Pressure equaliser layer result update
* Further commits
* Merged PR https://github.com/prusa3d/PrusaSlicer/pull/9622
* First complete working version
* Update PressureEqualizer.cpp
* Implemented parameter in GUI
* Toggle fields according to compatibility
* Updated UI toggles between extrusion rate slope and arc fitting.
* Updated tooltip
* Introduced parameter smoothing segment length
This parameter influences the number of division a line will undergo in response to the requirement to adhere to the extrusion rate flow adjustment.
* Internal parameter and tool tip tweaking
* Parameter and tool tip tweaking
* Updated parameters and tooltip following testing.
* Sync PressureEq with latest PrusaSlicer
* Revert "Sync PressureEq with latest PrusaSlicer"
This reverts commit 131fb94c6b.
---------
Co-authored-by: MGunlogson <MGunlogson@users.noreply.github.com>
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
1. Enable open support_activate_air_filtration
2. Fix display exhaust fan params when support_activate_air_filtration is closed
jira:STUDIO-4230
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ieddba4bb104b6068b5afb4c109ea6b90d7c4045b
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
smooth pei plate uses the same parameters as high temp plate
JIRA: STUDIO-4181
Change-Id: I9db8ca7440b5b205902fd4b35af6c24440e1104d
(cherry picked from commit 97e803f62e7d02ff171c2c63e261d319d49ce398)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
Add cmd line option to pass layer change gcode.
This is useful for lithophane auto change colors.
Cmd: --custom-gcode custom_gcode_toolchange.json
Examples of the input json file can be found in the jira.
Jira: STUDIO-4070
Change-Id: I5beb5ff7d6d81028e95013e79f955e498cd3ba30
(cherry picked from commit bed6152b95c965ea87958d94ec069d8c883a8037)
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
(cherry picked from commit 19cb6a0fbad0192d39813e449baed090baa163c5)
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
