xun.zhang
6f5ea725dc
ENH: add new way to set bed temperature
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I99a9f67e9b13b2137ad371b22cf0999ccf9c096d
(cherry picked from commit 69c2947daf66eb0a6732b1b980c9b87f597c8da7)
2025-09-17 16:22:05 +08:00
zhimin.zeng
194f52fb88
FIX:Add Button to restore the pop-up window which is not show again
...
jira: STUDIO-9734
Change-Id: I33280f747b095dbd1de1643c04c900365c36e922
(cherry picked from commit 9304073ecb6b16997bc89a19aa0fd2008922210f)
2025-09-17 15:48:58 +08:00
jiangkai.zhao
e85fc25690
ENH: update translation
...
jira: none
Change-Id: Iceeaf2d9bb93fcee4fadfdfc2a5f1f7ab4a0b684
(cherry picked from commit 2421cd430df8c2bd9c632c303388afb5b7064ee0)
2025-09-17 15:13:02 +08:00
xun.zhang
e5e95d48cc
FIX: filament map UI issues in mac
...
1.Also remove a useless otion in preferences page
jira:STUDIO-10472
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6c7052522f7c797fca35decb68879694cc1142b9
(cherry picked from commit 02b4fe96a121f7bff1b30ddf73ff99f2b7e6d6f3)
2025-09-17 11:41:03 +08:00
xun.zhang
0af34f4324
ENH: enhance auto flush option
...
1.Support auto flush when change printer and nozzle volume type
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9dfc2fff095bbf1901afe99556d1e57aa225f482
(cherry picked from commit f12305832227940eb0eae05817ad046dd4eff02d)
2025-09-17 11:39:56 +08:00
zhimin.zeng
27b16455b7
ENH:remove restrictions on mixed use of high and low temp filaments
...
jira: STUDIO-10482
Change-Id: Ifdf6f11b45f2e6d138ea615a3ad1f23d40ad3fe9
(cherry picked from commit 0178e930809cabcdbc09ab305e70e4323598b343)
(cherry picked from commit 8f92391717e37dd0f51aa067ad626b83630a46b1)
2025-09-17 11:36:18 +08:00
xun.zhang
c605f73d80
ENH: update translation
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I9b260cb3e21b9052c9a2d65378bd0e795f6db6f3
(cherry picked from commit 2507eba37d5f09cca51b3e9f9f281b2208e57eb1)
2025-09-10 15:02:23 +08:00
xun.zhang
fc09eb2138
ENH: temperoraily disable map dialog after slice
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6d3d90db3508642e0e56015296d3efd50248bd05
(cherry picked from commit 3ddc30a60a36c531b004b7bacc0c583f9d6add3d)
2025-09-09 17:17:07 +08:00
xun.zhang
9732c0b845
ENH: some tip logic optimize
...
1. Only check printablily if have explicit filament map
2. Refine some sentences
jira:STUDIO-9753,STUDIO-9727
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2fc3aa2276dc6f514c50ac2fcaf9509f41e778f3
(cherry picked from commit 73f92d27dab667c8893ab96e47f3832ce9d2de60)
2025-09-09 17:16:41 +08:00
xun.zhang
897a78ce9a
ENH: refine the logic of filament map dialog
...
1. Always change the map and mode in plate if plate mode is not default
2. Always add pop up before slice
3. Fix the mapping issue in gcode viewer
jira: studio-9523,studio-9519,studio-9513,studio-9479
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0d7d5daf081951ea2d49e06565762ac24064e77c
(cherry picked from commit afaa48520e16b6808f05e511ac1cfe91acadc84b)
2025-09-09 11:03:56 +08:00
xun.zhang
a91937a7f8
ENH: modify some sentences for translate
...
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6ba3de47566c73ee8d6f8f5f24c854b9599dc073
(cherry picked from commit f858d6c7a8509d3b798bca40cb07eb63ab6efcc0)
2025-09-06 23:53:37 +08:00
xun.zhang
057a1a4f5d
ENH: refine ui logic with filament group
...
1. Add filament group pop up when slice
2. Add more filament modes in filament dialog
3. Add capsule button
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8bc3a2e08696e406b89e550a0335a1a36728ee65
(cherry picked from commit f1702a5c3604f685a3b35ea0e83d29bdbbd90f70)
2025-09-06 23:52:20 +08:00
Vovodroid
5fa35342fd
Add stl, step, etc. to recent list ( #9481 )
...
* Add stl, step, etc. to recent list
* Make configurable
* Merge branch 'main' into recent-files-pr
2025-08-24 00:24:30 +08:00
yw4z
e9e069c167
Styling management for buttons and matching all button styles ( #8184 )
...
* Add button styling
* Fix dark mode compability
* printable area button
* Connection dialog icons
* Add aligment control
* Fix alignment
* add new styles
* Update BedShapeDialog.cpp
* Use darker text color on dark mode
* update code
* Update
* update
* Update
* Update WipeTowerDialog.cpp
* update
* Update Button.cpp
* update
* Update Button.cpp
* add enums for style and type
* update
* Update Button.cpp
* fix
* update
* Update DialogButtons.cpp
* Update UnsavedChangesDialog.cpp
* update
* update
* update
* Update Button.cpp
* cleanup
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
2025-07-17 20:44:45 +08:00
Noisyfox
9988d0a1f8
Merge branch 'main' into dev/bbl-network-upd
2025-06-25 08:49:55 +08:00
Kiss Lorand
5707f8f4a5
Swap pan and rotate mouse buttons ( #9972 )
...
Build all / Build All (push) Waiting to run
Build all / Flatpak (push) Waiting to run
* Swap pan and rotate buttons
* Add translation
2025-06-24 23:41:41 +08:00
Noisyfox
d60fcb0d11
Merge branch 'main' into dev/bbl-network-upd
...
# Conflicts:
# src/slic3r/GUI/SelectMachine.cpp
2025-06-21 10:27:10 +08:00
yw4z
8aec3f69e5
Remove usage of titlebar icons ( #9932 )
...
Build all / Build All (push) Waiting to run
Build all / Flatpak (push) Waiting to run
* ibit
* update
* Update RecenterDialog.cpp
* Update AboutDialog.cpp
2025-06-20 16:52:15 +08:00
Noisyfox
9444d61bb6
Merge branch 'main' into dev/bbl-network-upd
2025-06-01 19:33:39 +08:00
Alexandre Folle de Menezes
b8c5ddd0ee
Fix the spelling/grammar on the original english strings ( #9487 )
...
* Fix the spelling/grammar on english strings
* Fix the spelling/grammar on english strings, part 2
2025-06-01 19:32:36 +08:00
Alexandre Folle de Menezes
a2f87dc980
Fix casing issues on the original english strings ( #9513 )
...
* Use lowercase after comma
* Use uppercase after period
2025-06-01 19:31:55 +08:00
Noisyfox
0d61ae87ed
Fix typo
2025-05-23 15:31:09 +08:00
Noisyfox
05a0703120
Merge branch 'main' into dev/bbl-network-upd
...
# Conflicts:
# src/slic3r/GUI/SelectMachine.cpp
2025-05-17 00:22:09 +08:00
Alexandre Folle de Menezes
57a6f61349
Fix the spacing on the original english strings ( #9596 )
...
* Remove extra spaces between words
* Remove extra spaces after punctuation
* Remove extra spaces before punctuation
* Always needs a space after punctuation
* Always needs a space before parens
* Remove trailing spaces before newline
2025-05-16 16:31:58 +08:00
Noisyfox
461d42635f
Add option to toggle between legacy and new network plugins
2025-05-01 16:23:56 +08:00
Alexandre Folle de Menezes
d37f1b6a81
Fix english strings consistency ( #8881 )
...
* "non zero" -> "non-zero"
* "Z hop" -> "Z-hop"
* "works" -> "is working"
* "version at least x" -> "version x or higher"
* "printing job" -> "print job"
"to print on" -> "printing on"
* "is not find" -> "was not found"
* "boundary of plate" -> "plate boundaries"
* "toolchange" -> "tool change"
* "colour" -> "color"
* "cancelled" -> "canceled"
* "can not" -> "cannot"
* "gcode" -> "G-code"
2025-04-26 19:59:49 +08:00
sharanchius
3612d8e4eb
Finished Lithuanian translation - OrcaSlicer_LT.po ( #9000 )
...
# Description
Finished Lithuanian translation
Still some work with *.js (C:\Program
Files\OrcaSlicer\resources\web\***) files:
****
Not found where can add Lithuanian language into preferences menu:
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
Used internal Poedit tests and alredy loaded this language for my
working program interface.
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
2025-04-10 14:02:38 +08:00
SoftFever
b1de545ff9
Merge branch 'main' into dev/step-import-dialog
2025-04-05 17:47:59 +08:00
Graham Held
933b282c53
Add in a pref for camera orbit speed multiplier ( #8725 )
...
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
2025-03-30 16:16:08 +08:00
Mack
0bc2444079
ENH:Add 'Don't show again' to the step mesh
...
jira: STUDIO-8606
Change-Id: I2382b9052e2c994a458ad36ca61eb94c517927c6
(cherry picked from commit 0cce6619ce12aa8540f6dfca6d9ee79ffba65c19)
2025-03-27 22:17:07 +08:00
Sims
cc92abf8b5
Implement #8106 : Add setting to prevent loading printer information/project settings from .3mf ( #8268 )
...
* Initial implementation
* Add remember option to open project/load geometry only popup
* PR Feedback
2025-02-09 09:51:36 +08:00
Henri van der Riet
5b0ddbd5f7
merge conflicts
2024-09-08 01:04:19 +02:00
SoftFever
220213e846
Revert "Fix typos and grammar ( #6638 )"
...
This reverts commit 1afc1372bc
2024-09-07 20:04:17 +08:00
henrivdr
1afc1372bc
Fix typos and grammar ( #6638 )
...
* fix lots of typos, grammar etc.
* merge conflict
* merge conflict
* merge conflict
* merge conflict
* revert gettext comments
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-09-07 18:00:01 +08:00
SoftFever
7082e945b1
Revert "Fix Compile Warnings ( #5963 )"
...
This reverts commit b83e16dbdd
2024-08-12 00:00:20 +08:00
Robert Schiele
7bbffaa996
more missing includes ( #6398 )
...
Here are more missing header files recently identified by building
without precompiled header support.
2024-08-09 21:33:09 +08:00
Ocraftyone
b83e16dbdd
Fix Compile Warnings ( #5963 )
...
* Fix calls to depreciated wxPen constructor
* Fix use of wxTimerEvent
* Fix unrecognized character escape sequence
* Fix signed/unsigned mismatch
At least as much as possible without significantly altering parts of the application
* Clean unreferenced variables
* fix mistyped namespace selector
* Update deprecated calls
* Fix preprocessor statement
* Remove empty switch statements
* Change int vector used as bool to bool vector
* Remove empty control statements and related unused code
* Change multi character constant to string constant
* Fix discarded return value
json::parse was being called on the object, rather than statically like it should be. Also, the value was not being captured.
* Rename ICON_SIZE def used by MultiMachine
By having the definition in the header, it causes issues when other files define ICON_SIZE. By renaming it to MM_ICON_SIZE, this lessens the issue. It would probably be ideal to have the definitions in the respective .cpp that use them, but it would make it less convenient to update the values if needed in the future.
* Remove unused includes
* Fix linux/macOS compilation
* Hide unused-function errors on non-Windows systems
* Disable signed/unsigned comparison mismatch error
* Remove/Disable more unused variables
Still TODO: check double for loop in Print.cpp
* Remove unused variable that was missed
* Remove unused variables in libraries in the src folder
* Apply temporary fix for subobject linkage error
* Remove/Disable last set of unused variables reported by GCC
* remove redundant for loop
* fix misspelled ifdef check
* Update message on dialog
* Fix hard-coded platform specific modifier keys
* Remove duplicate for loop
* Disable -Wmisleading-indentation warning
* disable -Wswitch warning
* Remove unused local typedefs
* Fix -Wunused-value
* Fix pragma error on Windows from subobject linkage fix
* Fix -Waddress
* Fix null conversions (-Wconversion-null)
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-07-29 21:00:26 +08:00
Ocraftyone
c08126703c
Fix Preferences dialog sizing on multi monitor setups ( #5820 )
2024-07-29 00:15:16 +08:00
Vovodroid
45224eee21
Auto arrange plate after cloning ( #6009 )
...
* Auto arrange plate after cloning
2024-07-11 23:54:42 +08:00
Ocraftyone
5c9b82d6ec
Update Web Link Association in Preferences ( #5791 )
...
* Fix check_url_association return value
* Update Web Link Association Preferences
Uses a checkbox in place of button to show if the current instance is registered at a quick look
New function is added to build the link association item
Current association line shows "None" for no app associated, "Current Instance" if the current instance is associated, and the formatted path to the registered app (Removes quotes and other extra chars)
* Update to use localization
* Fix Linux Build
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-06-21 21:06:12 +08:00
SoftFever
c8915464f5
fix build errors on Linux
2024-05-29 00:04:54 +08:00
SoftFever
524efcfcca
support cura:// and thingiverse
2024-05-28 23:08:26 +08:00
SoftFever
6519e850ef
support makerworld.com
2024-05-28 23:08:26 +08:00
SoftFever
7725fbeb90
Printables.com support (associate prusaslicer:// link explicitly) ( #5416 )
...
* Enable ability to open `prusaslicer://` links
* Add needed function to miniz
* Import Zip Functionality
Allows zip file to be drag and dropped or imported via the menu option
Based on prusa3d/PrusaSlicer@ce38e57 and current master branch files
* Update dialog style to match Orca
* Ensure link is from printables
* add toggle option in preferences
doesn't actually control anything yet
* Add Downloader classes
As-is from PS master
* Create Orca Styled Variant of Icons
* Add Icons to ImGui
* Use PS's Downloader impl for `prusaslicer://` links
* Implement URL Registering on Windows
* Implement prusaslicer:// link on macOS
* Remove unnecessary class name qualifier in Plater.hpp
* Add downloader desktop integration registration and undo
* Revert Info.plist
* register prusaslicer:// on user request only
* fix build error
* fix single instance problem
* format
* add orcalicer:// handler for Mac
Attempt to add Linux support but seems not working
---------
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
2024-05-22 15:26:52 +08:00
Ocraftyone
a764d836e1
ENH: Open Prinables.com Links and Zip Archives ( #3823 )
...
* Enable ability to open `prusaslicer://` links
* Add needed function to miniz
* Import Zip Functionality
Allows zip file to be drag and dropped or imported via the menu option
Based on prusa3d/PrusaSlicer@ce38e57 and current master branch files
* Update dialog style to match Orca
* Ensure link is from printables
* add toggle option in preferences
doesn't actually control anything yet
* Add Downloader classes
As-is from PS master
* Create Orca Styled Variant of Icons
* Add Icons to ImGui
* Use PS's Downloader impl for `prusaslicer://` links
* Implement URL Registering on Windows
* Implement prusaslicer:// link on macOS
* Remove unnecessary class name qualifier in Plater.hpp
* Add downloader desktop integration registration and undo
* Revert Info.plist
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
2024-05-22 10:52:34 +08:00
SoftFever
f33b46ed32
update locale
2024-05-21 00:36:45 +08:00
cochcoder
0c62acd4ed
Add a description for Stealth Mode ( #5281 )
...
* Add description to stealth mode
* Merge branch 'SoftFever:main' into stealth-mode
2024-05-07 22:11:16 +08:00
SoftFever
226450ea6a
Merge some features from BS1.9 beta4 ( #5181 )
...
* FIX: linux: fix the building issue on Linux Mint 21.3 Virginia
github: https://github.com/bambulab/BambuStudio/issues/3874
author: https://github.com/lucianoloder
Change-Id: Ia3db6923d5dd68dba532d7bdba6f93f73cc51d59
* FIX: auto-arranging incorrect with rotation enabled
auto-arranging incorrect with rotation enabled and the objects already have been rotated.
jira: STUDIO-6022
Change-Id: I349d663efb1fc71367c8a77aa8ed5047a0bf2017
(cherry picked from commit 75fe40257a274ed83886e1ee20ce8dedd0de48f6)
* ENH: update X1C & X1E start gcode
1.Fix fan problem
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I68ee5be78e142e8a2a210a1a70f5663893390610
* ENH: update A series gcode
1. Update A1 series start gcode and change filament gcode
2. Add G2814 command
3. Add multi-filament extrusion compensation and vibration suppression
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I57d2bc8e98d3e547881dc1369c1fb31413c6205d
* FIX: fix some cali problem of P series
jira: none
Change-Id: Id57ea8d65da22ab653cca49509cb923ff065e43f
* FIX: fix can't enter ',' in multiplicator
github: #3805
Change-Id: I6dd70822d1c2e79d66c70514d6dd580ab029c7ea
* calib wizard
* NEW: FlipLines infill
jira:6701
New infill pattern that combine block lines infill and switching layers for smooth transition.
Change-Id: I2608a2d39b14efcdfe9d39a9437280da350b94c0
(cherry picked from commit 8d0a09c8b763dfc924cbba9913c241e6afadbc7f)
* ENH: add nozzle blob detection and air printing detection
jira: new
Change-Id: Ie4a19a7ad7d0b10a021c516cbc3a84b4ae734302
* FIX: Top surface bridging fail on 3DHC & FL infill
Add 45 degree angle offset when processing the bridge.
Need to raise infill_direction to invalidate posPrepareInfill
jira: 6774
Change-Id: I5e6bef3aa814b01c5f30398ac745937a67e3ef4c
(cherry picked from commit 7b12cab10b88f432a11414f8caa1c6427777a1ba)
* FIX: the error display when reset virtual slot
jira: none
Change-Id: I5ae5899baf1bfc2aaadb832083b277855a669fd5
* FIX: Error "Voronoi cell doesn't contain a sourcepoint"
github: 3859
Change-Id: Idca84992bcba5380bfe05e63ac9a5e40419dcfdf
* fix build error
* FIX: CLI: fix the crash issue caused by get_min_flush_volumes
JIRA: no jira
Change-Id: I0d5bfd605e51ebddac8fddc4d83dab5055b0fbf2
* FIX: can't use support filament in gcode.3mf
1. Add total_filament_volumes, directly access it to get used filaments
github:#3865
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4fae4f1947b4ebd16e394e0f3cf5fb0e9f979717
* ENH: p series support long retraction
1. P series support long retraction in filament
2. Add long retraction params in common.json
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib94184fa1f0b5ab151360f1f053d8c8ff92e7e18
* ENH::modify some logs level
jira:[for log]
Change-Id: I6a46b8fcd3a030b4b630e800fe9a9ac5c387f117
* NEW: support multi device
JIRA: STUDIO-6072
Change-Id: Ic514c4097767b0a728368c9ea48ee103c031fbb0
Signed-off-by: Stone Li <stone.li@bambulab.com>
* ENH: update A1 series gcode
1.Update filament change gcode and machine start gcode for
A1 and A1 mini
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2f3be3fd89fef21e717a32f2b89985fc046f7f6e
* FIX: always have 0th filament in ams mapping
1. Only set the filament id in map when flush length is not 0
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6e0aeaf010f6e6dcbdc3bca5c0034aa60750bb67
* ENH: add filament id in slice info
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic5fe4632bca8acacc9ffd072ee2ed207c1da37aa
* ENH: refine ui for multi machine
JIRA: STUDIO-6819 STUDIO-6824
1. Shrink the Send Print dialog box
2. add input box for flipping panel
Change-Id: I4174c79ecd239c374ee11478951e12be399c57ce
* FIX: fix Issues with sending multiple devices
JIRA: STUDIO-6876
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I33c6a932863fc715c3f0eb5dfd4b299f980a4918
* NEW: support hms error code
Change-Id: Ic256a83cf501fb05bb9d3203f3d24cb1d1290fa4
* FIX:fixed some multi job issue
Change-Id: I338078ad8fcf809888db9d8daeb470a9bf4eab46
* NEW:support pin code binding
Change-Id: Ida5d47881fbd83f3ffedc80369cfe377114d7f13
* ENH:add printable check for devices
Change-Id: I672988fa9cfa986d924bfc64331752f4aef68067
(cherry picked from commit 69de9e5b8334ec94eec7fcee31038b8ff42d1d3b)
* FIX: add more fonts
jira: none
Change-Id: I6bafed3563083858f29e92a3d84906a2e53dcb5c
(cherry picked from commit afbea693e807dcc1c406a59aa5376b9ea2a5d606)
* ENH: load more fonts
this feature is according to Prusa by Filip Sykala<filip.sykala@prusa3d.cz>, thanks to Filip Sykala
jira: none
Change-Id: I55e92f184f750c0b93b679d4382aaa5b164ec5c3
(cherry picked from commit d05522c4cc5d7ee4cac42de398b88d347a55f74b)
* ENH: add ProfileDescription for translate
1.Add ProfileDescription.hpp simply for translating
jira:NEW
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Iaa3ced1edccf67eaeebde35c1e8b36442d2e9a6f
* ENH: Improve CrossHatch transation layers
jira: 6701
Change name from Flippingline to CrossHatch.
Reduce noise, improve speed by 6.5%. Improve transation layers by
gradually increasing rotation angle and overshoot the transation
layer while direction changed.
Change-Id: I17fcc45b409074d121bf5bb5702e15553d925b51
* UP
* ENH: modify the default config for multi-device
JIRA: STUDIO-6072
Change-Id: If6e7582a8274eb5e685b8b8545f6eab5d17de3f5
Signed-off-by: Stone Li <stone.li@bambulab.com>
* ENH: add long retraction for P series
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6890695b67e674fc5cdc2a208e89bd9e41404213
* FIX: all plates stats data missing issue
jira: new
Change-Id: I137a2b6d69ad08791f5a9a9788653621960dc63f
* ENH:update pre print options
jira:[for multi]
Change-Id: I2e9bb8a09436a71749af98a0bad94e9922f95c81
* FIX:fixed can't popup pinbind win on macos
jira:[STUDIO-6895]
Change-Id: I664bba78cf27420d736b586df19e3c09c6f8ed21
* FIX:fixed the task of padding cannot be cancelled
Change-Id: I401a22118c14ca7601be7a925cfd8e4796dfc1e9
* ENH:Play video after redirecting to device page
jira:[STUDIO-6884]
Change-Id: Ia5e2ac84e3d71baacfcf941b782dab2325f35d54
* FIX: fix ui bug in send multi machine page for mac
JIRA: STUDIO-6882
Incorrect background color when renaming during multi machine printing
Change-Id: I6c551f5023ffe747e7a7e2f5703b0707c9505922
* FIX: Fix some bugs in maintaining the selected status of local tasks
JIRA: STUDIO-6824
Change-Id: I12c4da3fc56ac5077b3ccd7e89a4b57c3675eaf5
* ENH: local task sort by send time by default
JIRA: STUDIO-6885
Change-Id: I03b5881a39ab2e90c5b9cf46052ba465ee707ccc
* FIX: Clicking to continue printing does not take effect in error code
JIRA: STUDIO-6830
Detected an incomplete printing task error pop-up when power outage occurred. Clicking to continue printing did not take effect
Change-Id: Ie85a1602093dabac861cd1f41ea21e1c312c83e9
* ENH: use designTitle when designId > 0
JIRA: STUDIO-6072
Change-Id: I8342df053edeab16f930522e099e2eef91e5c5a4
Signed-off-by: Stone Li <stone.li@bambulab.com>
* NEW:import vertex and mtl color from obj file
Jira: STUDIO-6805
Change-Id: Iaacb13ee2451effdb83e5aba4b7fe1637b7fc95f
* FIX:change the strategy of merge_ka_kd
Upgrade ui, users can directly ok to proceed to the next step
jira: STUDIO-6805
Change-Id: Ia81019c2eacb503666680c0b8583d026baa0134c
(cherry picked from commit 38a2434753c8e3b422267283b16c75f6ad195b14)
* FIX:use default_strategy after modifed cluster number
jira: STUDIO-6915
Change-Id: I4e0c3d62f5a766f73d48d1e06c4364fc6babe1ac
* FIX: the bug of incorrect button without restarting
JIRA: STUDIO-6824
The bug can cause the user to not restart when opening the multi-device option, but the button of send multi-devices appears
Change-Id: I0837fa79ecc1d8ab5ce98273ad134fa2f830421e
* FIX: wrong default value for long retraction
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ifc2ec57a320fdb14e7ca746e5795501ed146ff32
* FIX: error code pop-up window without retry button in some code
JIRA: STUDIO-6922
Change-Id: I67464bebaba4558618301592c455db8824bbfe30
* FIX: air printing and nozzle blob detection issue
jira: STUDIO-6897
Change-Id: I008ddb24b74119d7e4124ae26310b4b86c42a799
* FIX:fix bugs of algo and read quad in obj file
Jira: STUDIO-6805
Change-Id: I6c33e8197225f27dccdfa0681e64d76d1df14f61
* dd
* ENH:Set the default nozzle diameter to 0.4
jira:[for nozzle]
Change-Id: I74a5c9b0460046496b897eae3d9f917ac1b99052
* FIX:fixed backspace error on macos
Change-Id: I76066391783c04857c1a60a6f8438111501b6d7c
* ENH:Subscription list deduplication
jira:[for mulit]
Change-Id: I10e9d849986c9661b587c7b1a509180c2451816e
* ENH:update wiki url for Pin Code
jira:[pin code]
Change-Id: I95faaa396a839b5b159119ef235b650c76706a84
* NEW:add OpenCV.cmake in deps
jira: none
Change-Id: I1ae4a2bd5618e9e620b08a937904d6af5d00bc41
* FIX:cancel obj import restrictions
jira: none
Change-Id: Iaf3e799ca982ad6aeb3ec76e9a416c4c8e4d100c
* NEW:add multiple printer restrictions
jira:[for multiple]
Change-Id: I0bb5a0c1062a543c42f8d67a9347efa358b0864a
* ENH:Added two entrances for adding devices
jira:[multi device]
Change-Id: Ieb6197e067d422979606f93b22b337a2399aec74
* slic3r: Fix wxFont being undefined
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
In file included from /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:1:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.hpp:51:21: error: ‘wxFont’ does not name a type
51 | bool can_load(const wxFont &font);
| ^~~~~~
* slic3r: Fix missing BOOST_LOG_TRIVIAL declaration
[427/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/Utils/FontUtils.cpp.o -c /run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp: In function ‘std::unique_ptr<Slic3r::FontFile> Slic3r::create_font_file(const char*)’:
/run/build/BambuStudio/src/slic3r/Utils/FontUtils.cpp:127:27: error: ‘error’ was not declared in this scope; did you mean ‘perror’?
127 | BOOST_LOG_TRIVIAL(error) << "Couldn't open " << file_path << " for reading.";
| ^~~~~
| perror
[447/494] Building CXX object src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
FAILED: src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o
/usr/bin/c++ -DBOOST_ATOMIC_NO_LIB -DBOOST_CHRONO_NO_LIB -DBOOST_DATE_TIME_NO_LIB -DBOOST_FILESYSTEM_NO_LIB -DBOOST_IOSTREAMS_NO_LIB -DBOOST_LOCALE_NO_LIB -DBOOST_LOG_NO_LIB -DBOOST_REGEX_NO_LIB -DBOOST_SYSTEM_NO_LIB -DBOOST_THREAD_NO_LIB -DCURL_STATICLIB -DGLEW_STATIC -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DOPENSSL_CERT_OVERRIDE -DOPENVDB_OPENEXR_STATICLIB -DOPENVDB_STATICLIB -DSLIC3R_CURRENTLY_COMPILING_GUI_MODULE -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -D__WXGTK3__ -D__WXGTK__ -DwxDEBUG_LEVEL=0 -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -I/run/build/BambuStudio/src -I/run/build/BambuStudio/build/src/platform -I/run/build/BambuStudio/src/hidapi/include -I/run/build/BambuStudio/src/slic3r/Utils -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/webp -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/atk-1.0 -I/usr/include/fribidi -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -I/usr/include/gstreamer-1.0 -I/run/build/BambuStudio/build/src/libslic3r -I/run/build/BambuStudio/deps/build/destdir/usr/local/include/opencascade -I/run/build/BambuStudio/src/libnest2d/include -I/run/build/BambuStudio/src/miniz -I/run/build/BambuStudio/src/glu-libtess/include -I/run/build/BambuStudio/src/clipper2/Clipper2Lib/include -I/run/build/BambuStudio/src/minilzo -isystem /run/build/BambuStudio/src/eigen -isystem /run/build/BambuStudio/src/libigl -isystem /app/lib/wx/include/gtk3-unicode-static-3.1 -isystem /app/include/wx-3.1 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/opencv4 -isystem /run/build/BambuStudio/deps/build/destdir/usr/local/include/OpenEXR -std=gnu++20 -fext-numeric-literals -Wall -Wno-reorder -pthread -O3 -DNDEBUG -std=gnu++17 -fPIC -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-unknown-pragmas -DOPENVDB_ABI_VERSION_NUMBER=8 -MD -MT src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -MF src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o.d -o src/slic3r/CMakeFiles/libslic3r_gui.dir/GUI/TaskManager.cpp.o -c /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp
In file included from /run/build/BambuStudio/src/slic3r/GUI/TaskManager.cpp:1:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp: In member function ‘void Slic3r::TaskStateInfo::set_state(Slic3r::TaskState)’:
/run/build/BambuStudio/src/slic3r/GUI/TaskManager.hpp:40:9: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
40 | BOOST_LOG_TRIVIAL(trace) << "TaskStateInfo set state = " << get_task_state_enum_str(ts);
| ^~~~~~~~~~~~~~~~~
* fix OpenCV
* wip - build break
* fix build error wip
* ENH: support preset description(tooltip)
Change-Id: Iff005baac4974c538d1109fb0ba1df20b04a8f69
Jira: STUDIO-5754
* fix more build errors
* Revert "ENH: load more fonts"
This reverts commit 32b6fd199a
2024-04-28 22:58:47 +08:00
noobydp
2b4520b2df
ENH: restore single instance ( #4810 )
2024-04-20 20:05:15 +08:00
Gabriel E Dvoranen
add3040f68
Initial Add of Brazilian Portuguese translation ( #5043 )
...
Team:
https://github.com/DvoraGames
https://github.com/jcalmeida85
https://github.com/ramorimdias
https://github.com/Caminhaleonel
2024-04-17 19:15:26 +08:00
