1. refine some tip
2. alert when bed temperture greq than softening temperature
jira: STUDIO-4532
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib9623553a40825015744783f30c6e439827a49c6
* Remove BambuLab's implementation of solid infill bridging enhancement
, will use Prusa's instead
* Port "Extend sparse infill" from Prusa
* Improve anchoring by shifting the lines half-spacing
* Add missing fill patterns
* Improve anchoring by keeping fine details
* Make sure the opposite directions do not cancel each other
---------
Co-authored-by: Pavel Mikus <pavel.mikus.mail@seznam.cz>
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
* Initial commit of code from Prusa Slicer 2.6.1
* Ported ExtrusionRole from Prusa Slicer 2.6.1
* fix compile errors
* Update GCode.hpp
* code changes to invoke pressure equalizer
* attempting to trigger pressure equalizer
(Not compiling)
* Update Fill.cpp
* Update Fill.cpp
* Pressure equaliser layer result update
* Further commits
* Merged PR https://github.com/prusa3d/PrusaSlicer/pull/9622
* First complete working version
* Update PressureEqualizer.cpp
* Implemented parameter in GUI
* Toggle fields according to compatibility
* Updated UI toggles between extrusion rate slope and arc fitting.
* Updated tooltip
* Introduced parameter smoothing segment length
This parameter influences the number of division a line will undergo in response to the requirement to adhere to the extrusion rate flow adjustment.
* Internal parameter and tool tip tweaking
* Parameter and tool tip tweaking
* Updated parameters and tooltip following testing.
* Sync PressureEq with latest PrusaSlicer
* Revert "Sync PressureEq with latest PrusaSlicer"
This reverts commit 131fb94c6b.
---------
Co-authored-by: MGunlogson <MGunlogson@users.noreply.github.com>
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
1. Enable open support_activate_air_filtration
2. Fix display exhaust fan params when support_activate_air_filtration is closed
jira:STUDIO-4230
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ieddba4bb104b6068b5afb4c109ea6b90d7c4045b
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
smooth pei plate uses the same parameters as high temp plate
JIRA: STUDIO-4181
Change-Id: I9db8ca7440b5b205902fd4b35af6c24440e1104d
(cherry picked from commit 97e803f62e7d02ff171c2c63e261d319d49ce398)
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id14f3d91171b81239b336ef879061c6de7d68edf
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
Add cmd line option to pass layer change gcode.
This is useful for lithophane auto change colors.
Cmd: --custom-gcode custom_gcode_toolchange.json
Examples of the input json file can be found in the jira.
Jira: STUDIO-4070
Change-Id: I5beb5ff7d6d81028e95013e79f955e498cd3ba30
(cherry picked from commit bed6152b95c965ea87958d94ec069d8c883a8037)
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
(cherry picked from commit 19cb6a0fbad0192d39813e449baed090baa163c5)
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
* Overhang perimeter handling
Updated code to handle overhang perimeters as an overhang and not as a bridge.
* Preparing to add curled extrusions identification
* Porting curling calculations from Prusa Slier 2.6.1
* Prototype 1 - slowdown extended to detect curled edges and further reduce speed
First prototype of the code submitted.
* Working prototype - 2
Code is now finally working - external perimeters are slowed down as needed when there is likelyhood of curling up.
ToDo:
1. Reslicing the model causes the algorithm not to run - need to find where this fails to trigger the call for this.
2. Slowdown of internal perimeters not working yet.
* Updated to use overhang wall speed instead of bridging speed for this algorithm
* Fixed bug in speed calculation and tweaked parameters for high speed printer
Fixed bug in speed calculation and tweaked parameters for high speed printer
* Attempting to fix "set started" not being set
* Parameter tweak after print tests
* Fixed estimation not running when model is re-sliced.
* Removing debug printf statements and fixed threading flag.
* Fixed threading
* Parameter tweaks following print tests
* Made this as an option in the GUI
* Reintroduced handling of bridges as per original design
* UI line toggling when option makes sense to be visible.
* Fixed bug in field visibility & made it default to off
* Code optimisation
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Initial port of organic tree support from PrusaSlicer
* Port missing Organic support parameters from PrusaSlicer
* Update parameter naming
* Reorganize the `raft_first_layer_expansion` and `raft_first_layer_density` parameters as they are not only used by rafts
* Reset support style only in simple mode
* Sync latest update from PrusaSlicer & copyrights
* Fix organic tree support crash with invalid parameters
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
PrusaLink: Use PUT or POST based on information read during test connection (upload-by-put). If put - do additional GET for storage_list and let user to choose where to upload or show name if only 1 is possible. Allow PrusaLink for MK2.5 and MK2.5S.
PrusaConnect: New host type PrusaConnect inherited from PrusaLink class with filled host address, disabled http diggest. After upload read header information - status message and pass it to notification and Printhost upload dialog via events, this message can be shown as warning notification and is recieved in localized lang. Pass accept-language shortcut in upload header. 3 option to upload. (upload, to queue, to print)
Upload Notification: Showing status text, changes in text, not showing close button, Completed state on special call (not 100%) and other design changes.
Right panel: Open URL button.
