Ghostkeeper
0d793a60fe
Remove duplicate infill overlap setting
...
infill_overlap and infill_overlap_mm were in conflict with each other. Went to the Materials team to resolve it. They say it should be 0.
Contributes to issue CURA-3650.
2017-04-14 15:14:51 +02:00
Jaime van Kessel
c087f4b0dc
Merge branch 'master' of git://github.com/maukcc/cura
2017-04-14 14:30:25 +02:00
Ghostkeeper
ac46c4358b
Merge branch '2.5'
2017-04-14 11:56:57 +02:00
Ghostkeeper
3a30386ec6
Fix brim width of Nylon 0.8mm profiles
...
The 3mm was computed from wanting 7 lines, but in that calculation I used a line width of 0.4mm. This is obviously wrong, since for 0.8mm profiles the line width is 0.8mm.
Contributes to issue CURA-3650.
2017-04-14 11:56:36 +02:00
Ghostkeeper
a8df94f5b3
Merge branch '2.5'
2017-04-14 10:29:43 +02:00
Ghostkeeper
39ceb53980
Set raft margin to 10
...
This was ambiguous in the original profiles.
Contributes to issue CURA-3650.
2017-04-14 10:22:25 +02:00
Ghostkeeper
b0a1e909c9
Merge branch '2.5'
2017-04-13 16:10:10 +02:00
Ghostkeeper
ba64573fa0
Use support interface density instead of line distance
...
This way the user can still override the line distance if necessary.
Contributes to issue CURA-3650.
2017-04-13 16:09:51 +02:00
Ghostkeeper
6d266d2da6
Merge branch '2.5'
2017-04-12 17:32:40 +02:00
Ghostkeeper
cc2d0d3cfe
Add 0.8mm TPU profiles
...
They have already been optimised together with ABS, CPE, PLA, Nylon and PVA.
Contributes to issue CURA-3650.
2017-04-12 17:32:26 +02:00
Ghostkeeper
35fd58f721
Optimise 0.4mm profiles for CPEP, PC and TPU
...
These optimisations should only remove settings that are exactly equal to the parent profile. Support interface settings are an exception, since they were defining non-existing settings in the original profiles. The stand-by temperature is also an exception, since the stand-by temperature of the material profile is set in stone because of firmware.
Contributes to issue CURA-3650.
2017-04-12 17:23:29 +02:00
Ghostkeeper
febd1f0f79
Make sure that the UM3 definition is taken into account when optimising
...
Otherwise it acts as if the settings were the defaults for FDMPrinter rather than defaulting to the current UM3 settings.
Contributes to issue CURA-3650.
2017-04-12 16:29:36 +02:00
Ghostkeeper
c2fdf68caf
Set Equalize Filament Flow to True for all 0.8mm profiles
...
Orders from the materials team. They mistakenly set this to False in their original profiles.
Contributes to issue CURA-3650.
2017-04-12 15:42:09 +02:00
Ghostkeeper
397c2666f0
Optimise profiles for 0.8mm cores
...
Sample testing confirms that these are equal to their originals. Nylon, PLA and PVA were already optimised, but ABS and CPE weren't. Now all are optimised except some 0.4mm core profiles. I'll see to those next. Note that the filament flow compensation setting is still wrong in these profiles (it was wrong in the original profiles as well).
Contributes to issue CURA-3650.
2017-04-12 15:38:07 +02:00
MaukCC
0768cea49b
Add files via upload
2017-04-12 15:08:36 +02:00
MaukCC
a78bb88ebc
Add files via upload
2017-04-12 15:07:11 +02:00
MaukCC
46426db8e6
Create cartesio_global_Coarse_Quality.inst.cfg
2017-04-12 15:06:23 +02:00
MaukCC
fb3966d8f5
Delete cartesio_0.8_pla_draft.inst.cfg
2017-04-12 15:05:38 +02:00
MaukCC
bcbe7bdbd4
Delete cartesio_0.4_pla_draft.inst.cfg
2017-04-12 15:05:28 +02:00
MaukCC
99afe3648e
Delete cartesio_0.25_pla_draft.inst.cfg
2017-04-12 15:05:16 +02:00
MaukCC
642dfa9372
Update cartesio_0.8_pla_draft.inst.cfg
2017-04-12 10:47:30 +02:00
MaukCC
c41392a101
Update cartesio_0.25_pla_draft.inst.cfg
2017-04-12 10:47:15 +02:00
MaukCC
a6346b1277
Add files via upload
2017-04-12 10:45:17 +02:00
MaukCC
8da7fbb119
Create cartesio_0.4_pla_draft.inst.cfg
2017-04-12 10:43:36 +02:00
Ghostkeeper
cb7c25f92f
Merge branch 'master' into feature_support_top_bottom_speed
2017-04-10 10:52:31 +02:00
fieldOfView
7adc904cf1
Remove absolute value warnings by moving some values to the machine definition
2017-04-06 13:17:24 +02:00
fieldOfView
a8fffd45a0
Add High and Maximum Quality profiles
2017-04-06 12:29:31 +02:00
fieldOfView
a904c383ea
Add Moai-specific "Normal" profile
2017-04-06 12:29:30 +02:00
Jaime van Kessel
a69bf967e5
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-04 13:31:02 +02:00
Jaime van Kessel
d5382c7924
Merge branch 'revise_jellybox_support' of git://github.com/IMADE3D/cura
2017-04-04 13:28:53 +02:00
Ghostkeeper
6f2efbee61
Merge branch '2.5'
2017-04-04 11:24:12 +02:00
Ghostkeeper
28555c685f
Add profiles for 0.8mm ABS and CPE
...
These profiles are not optimised yet. I'm not allowed to optimise them since there seem to be bugs in the optimisation.
2017-04-04 11:23:46 +02:00
Ghostkeeper
2e790852ce
Merge branch '2.5'
2017-04-03 11:38:28 +02:00
Ghostkeeper
b0ecb3ecdf
Unoptimize CPE+, PC and TPU profiles
...
There have been some problems in the optimization of these profiles, so we undo this for now, preventing people from editing these materials and risking some warnings in Cura's interface, but providing the correct experience for people trying the new materials.
2017-04-03 11:37:48 +02:00
Ghostkeeper
6eeb61c6ff
Merge branch 'maukcc-master'
2017-03-29 13:26:14 +02:00
Ghostkeeper
23a09f7f3c
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
2017-03-29 13:25:34 +02:00
Filip Goc
a328261456
add jellybox specific profiles
...
pla and a few petg profiles to get started
2017-03-28 12:57:43 -04:00
Jack Ha
efa1513e4c
Changed all Not Supported Draft quality profiles to Not Supported Superdraft to prevent double Not Supported entries. CURA-3555
2017-03-27 16:00:08 +02:00
Jack Ha
088202c366
Changed all Not Supported Draft quality profiles to Not Supported Superdraft to prevent double Not Supported entries. CURA-3555
2017-03-27 10:30:51 +02:00
Lipu Fei
578f72c91e
Use "False" instead "false" in cfg files
...
CURA-3555
2017-03-24 10:44:44 +01:00
Jack Ha
33d16f8601
Added Not Supported profiles when second extruder is a 0.8 nozzle. CURA-3555
2017-03-22 14:51:53 +01:00
Jack Ha
6dcd4d13e4
Removed quality profile aa0.8 PLA Not Supported. CURA-3555
2017-03-22 13:24:13 +01:00
Jack Ha
40a7d2fecc
Added not supported quality profiles. CURA-3555
2017-03-22 09:33:17 +01:00
Jaime van Kessel
5489fc8caf
Added number of missing quality profiles
...
CURA-3555
2017-03-21 14:43:01 +01:00
Ghostkeeper
cdaeb13c3a
Use support infill density instead of line distance
...
Making these profiles use line distance prevents the user from setting their own density. This density is exactly equivalent.
Contributes to issue CURA-3491.
2017-03-17 13:29:15 +01:00
Jack Ha
aa691033e0
Added Not Supported profiles for incompatible materials. CURA-3510
2017-03-16 16:01:18 +01:00
Jaime van Kessel
ad7752bb16
Revert "Updated version of superdraft and verydraft. CURA-3479"
...
This reverts commit 62de4f9ec6
2017-03-16 11:16:02 +01:00
Jaime van Kessel
0c1829af1e
Revert "Upgrade built-in instance containers"
...
This reverts commit b162be4df8
2017-03-16 11:15:20 +01:00
MaukCC
37d7cd989b
Create draft.inst.cfg
2017-03-14 15:03:52 +01:00
MaukCC
4620187fdc
Update extra_coarse.inst.cfg
2017-03-14 15:03:05 +01:00
