add jellybox specific profiles

pla and a few petg profiles to get started

resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg

@@ -0,0 +1,55 @@
+[general]
+version = 2
+name = Coarse
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_petg_imade3d_jellybox_0.4_mm
+weight = -1
+quality_type = fast
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 1.2
+cool_fan_speed_max = 60
+cool_fan_speed_min = 20
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.3
+layer_height_0 = 0.3
+line_width = 0.4
+material_bed_temperature = 50
+material_bed_temperature_layer_0 = 55
+material_flow = 100
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 25
+retraction_retract_speed = 35
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 25
+skirt_line_count = 2
+speed_layer_0 = 14
+speed_print = 40
+speed_slowdown_layers = 1
+speed_topbottom = 20
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = =top_bottom_thickness
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg

@@ -0,0 +1,55 @@
+[general]
+version = 2
+name = Coarse
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_petg_imade3d_jellybox_0.4_mm_2-fans
+weight = -1
+quality_type = fast
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 1.2
+cool_fan_speed_max = 40
+cool_fan_speed_min = 20
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.3
+layer_height_0 = 0.3
+line_width = 0.4
+material_bed_temperature = 50
+material_bed_temperature_layer_0 = 55
+material_flow = 100
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 25
+retraction_retract_speed = 35
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 25
+skirt_line_count = 2
+speed_layer_0 = 14
+speed_print = 40
+speed_slowdown_layers = 1
+speed_topbottom = 20
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = =top_bottom_thickness
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg

@@ -0,0 +1,55 @@
+[general]
+version = 2
+name = Medium
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_petg_imade3d_jellybox_0.4_mm
+weight = 0
+quality_type = normal
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 1.2
+cool_fan_speed_max = 60
+cool_fan_speed_min = 20
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.2
+layer_height_0 = 0.3
+line_width = 0.4
+material_bed_temperature = 50
+material_bed_temperature_layer_0 = 55
+material_flow = 100
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 25
+retraction_retract_speed = 35
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 25
+skirt_line_count = 2
+speed_layer_0 = 14
+speed_print = 40
+speed_slowdown_layers = 1
+speed_topbottom = 20
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = =top_bottom_thickness
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg

@@ -0,0 +1,55 @@
+[general]
+version = 2
+name = Medium
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_petg_imade3d_jellybox_0.4_mm_2-fans
+weight = 0
+quality_type = normal
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 1.2
+cool_fan_speed_max = 40
+cool_fan_speed_min = 20
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.2
+layer_height_0 = 0.3
+line_width = 0.4
+material_bed_temperature = 50
+material_bed_temperature_layer_0 = 55
+material_flow = 100
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 25
+retraction_retract_speed = 35
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 25
+skirt_line_count = 2
+speed_layer_0 = 14
+speed_print = 40
+speed_slowdown_layers = 1
+speed_topbottom = 20
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = =top_bottom_thickness
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+version = 2
+name = Coarse
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_pla_imade3d_jellybox_0.4_mm
+weight = -1
+quality_type = fast
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 0.65
+cool_fan_speed_max = 100
+cool_fan_speed_min = 50
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.3
+layer_height_0 = 0.3
+line_width = 0.4
+material_flow = 90
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 30
+retraction_retract_speed = 70
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 20
+skirt_line_count = 3
+speed_layer_0 = 20
+speed_print = 45
+speed_slowdown_layers = 1
+speed_topbottom = 25
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = 0.8
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+version = 2
+name = Coarse
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_pla_imade3d_jellybox_0.4_mm_2-fans
+weight = -1
+quality_type = fast
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 0.65
+cool_fan_speed_max = 100
+cool_fan_speed_min = 20
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.3
+layer_height_0 = 0.3
+line_width = 0.4
+material_flow = 90
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 30
+retraction_retract_speed = 70
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 20
+skirt_line_count = 3
+speed_layer_0 = 20
+speed_print = 45
+speed_slowdown_layers = 1
+speed_topbottom = 25
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = 0.8
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg

@@ -0,0 +1,54 @@
+[general]
+version = 2
+name = Fine
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_pla_imade3d_jellybox_0.4_mm
+weight = 1
+quality_type = high
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 0.65
+cool_fan_speed_max = 100
+cool_fan_speed_min = 50
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.1
+layer_height_0 = 0.3
+line_width = 0.4
+material_flow = 90
+material_print_temperature = 205
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 30
+retraction_retract_speed = 70
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 20
+skirt_line_count = 3
+speed_layer_0 = 20
+speed_print = 45
+speed_slowdown_layers = 1
+speed_topbottom = 25
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = 0.8
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg

@@ -0,0 +1,54 @@
+[general]
+version = 2
+name = Fine
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_pla_imade3d_jellybox_0.4_mm_2-fans
+weight = 1
+quality_type = high
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 0.65
+cool_fan_speed_max = 100
+cool_fan_speed_min = 20
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.1
+layer_height_0 = 0.3
+line_width = 0.4
+material_flow = 90
+material_print_temperature = 205
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 30
+retraction_retract_speed = 70
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 20
+skirt_line_count = 3
+speed_layer_0 = 20
+speed_print = 45
+speed_slowdown_layers = 1
+speed_topbottom = 25
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = 0.8
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+version = 2
+name = Medium
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_pla_imade3d_jellybox_0.4_mm
+weight = 0
+quality_type = normal
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 0.65
+cool_fan_speed_max = 100
+cool_fan_speed_min = 50
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.2
+layer_height_0 = 0.3
+line_width = 0.4
+material_flow = 90
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 30
+retraction_retract_speed = 70
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 20
+skirt_line_count = 3
+speed_layer_0 = 20
+speed_print = 45
+speed_slowdown_layers = 1
+speed_topbottom = 25
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = 0.8
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg

@@ -0,0 +1,53 @@
+[general]
+version = 2
+name = Medium
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_pla_imade3d_jellybox_0.4_mm_2-fans
+weight = 0
+quality_type = normal
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 0.65
+cool_fan_speed_max = 100
+cool_fan_speed_min = 20
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.2
+layer_height_0 = 0.3
+line_width = 0.4
+material_flow = 90
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 30
+retraction_retract_speed = 70
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 20
+skirt_line_count = 3
+speed_layer_0 = 20
+speed_print = 45
+speed_slowdown_layers = 1
+speed_topbottom = 25
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = 0.8
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg

@@ -0,0 +1,55 @@
+[general]
+version = 2
+name = UltraFine
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_pla_imade3d_jellybox_0.4_mm
+weight = 2
+quality_type = ultrahigh
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 0.65
+cool_fan_speed_max = 100
+cool_fan_speed_min = 50
+cool_min_layer_time = 5
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.05
+layer_height_0 = 0.3
+line_width = 0.4
+material_flow = 90
+material_print_temperature = 202
+material_print_temperature_layer_0 = 210
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 30
+retraction_retract_speed = 70
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 20
+skirt_line_count = 3
+speed_layer_0 = 20
+speed_print = 45
+speed_slowdown_layers = 1
+speed_topbottom = 25
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = 0.8
+wall_thickness = 0.8

resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg

@@ -0,0 +1,55 @@
+[general]
+version = 2
+name = UltraFine
+definition = imade3d_jellybox
+
+[metadata]
+type = quality
+material = generic_pla_imade3d_jellybox_0.4_mm_2-fans
+weight = 2
+quality_type = ultrahigh
+
+[values]
+adhesion_type = skirt
+bottom_thickness = 0.6
+coasting_enable = True
+coasting_speed = 95
+cool_fan_full_at_height = 0.65
+cool_fan_speed_max = 100
+cool_fan_speed_min = 20
+cool_min_layer_time = 4
+cool_min_layer_time_fan_speed_max = 10
+cool_min_speed = 10
+infill_before_walls = False
+infill_line_width = 0.6
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 20
+layer_height = 0.05
+layer_height_0 = 0.3
+line_width = 0.4
+material_flow = 90
+material_print_temperature = 202
+material_print_temperature_layer_0 = 210
+meshfix_union_all = False
+retraction_amount = 1.3
+retraction_combing = all
+retraction_hop_enabled = 0.1
+retraction_min_travel = 1.2
+retraction_prime_speed = 30
+retraction_retract_speed = 70
+retraction_speed = 70
+skin_no_small_gaps_heuristic = False
+skirt_brim_minimal_length = 100
+skirt_brim_speed = 20
+skirt_line_count = 3
+speed_layer_0 = 20
+speed_print = 45
+speed_slowdown_layers = 1
+speed_topbottom = 25
+speed_travel = 120
+speed_travel_layer_0 = 60
+speed_wall = 25
+speed_wall_x = 35
+top_thickness = 0.8
+wall_thickness = 0.8