3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-08-05 04:54:04 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 11

Optimise 0.4mm profiles for CPEP, PC and TPU

Browse source 
These optimisations should only remove settings that are exactly equal to the parent profile. Support interface settings are an exception, since they were defining non-existing settings in the original profiles. The stand-by temperature is also an exception, since the stand-by temperature of the material profile is set in stone because of firmware.

Contributes to issue CURA-3650.
This commit is contained in:
Ghostkeeper 2017-04-12 17:23:29 +02:00
parent 53476b62bc
commit 35fd58f721
No known key found for this signature in database
GPG key ID: C5F96EE2BC0F7E75
11 changed files with 658 additions and 1150 deletions
Download patch file Download diff file Expand all files Collapse all files

145
resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
View file

@ -1,95 +1,50 @@
[general]
version = 2
name = Draft Print
definition = ultimaker3
[metadata]
type = quality
quality_type = draft
material = generic_cpe_plus_ultimaker3_AA_0.4
weight = -2
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = brim
brim_width = 7
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
cool_fan_speed = 1
cool_fan_speed_max = 80
cool_min_layer_time = 5
cool_min_speed = 5
infill_line_width = =round(line_width * 0.35 / 0.35, 2)
infill_overlap = 0
infill_pattern = triangles
infill_sparse_density = 20
infill_wipe_dist = 0
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.2
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.875
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.9
machine_nozzle_heat_up_speed = 1.4
material_bed_temperature = 107
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature + 10
material_print_temperature_layer_0 = =material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 17
prime_tower_wipe_enabled = True
retraction_amount = 7
retraction_combing = off
retraction_count_max = 25
retraction_extrusion_window = 1
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
skin_overlap = 20
speed_infill = =speed_print
speed_layer_0 = 20
speed_prime_tower = =speed_topbottom
speed_print = 50
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = =math.ceil(speed_print * 65 / 50)
speed_travel = 250
speed_wall = =math.ceil(speed_print * 50 / 50)
speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
speed_wall_x = =speed_wall
support_angle = 60
support_bottom_distance = =support_z_distance
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height
top_bottom_thickness = 1.2
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
wall_thickness = 1
[general]
version = 2
name = Draft Print
definition = ultimaker3
[metadata]
type = quality
quality_type = draft
material = generic_cpe_plus_ultimaker3_AA_0.4
weight = -2
[values]
acceleration_enabled = True
acceleration_print = 4000
cool_fan_speed_max = 80
cool_min_speed = 5
infill_line_width = =round(line_width * 0.35 / 0.35, 2)
infill_overlap = 0
infill_pattern = triangles
infill_wipe_dist = 0
jerk_enabled = True
jerk_print = 25
layer_height = 0.2
machine_min_cool_heat_time_window = 15
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 10
material_print_temperature_layer_0 = =material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 17
prime_tower_wipe_enabled = True
retraction_combing = off
retraction_extrusion_window = 1
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
skin_overlap = 20
speed_layer_0 = 20
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 65 / 50)
speed_travel = 250
speed_wall = =math.ceil(speed_print * 50 / 50)
speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
support_bottom_distance = =support_z_distance
support_z_distance = =layer_height
travel_avoid_distance = 3
wall_0_inset = 0
wall_thickness = 1

144
resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
View file

@ -1,95 +1,49 @@
[general]
version = 2
name = Fast Print
definition = ultimaker3
[metadata]
type = quality
quality_type = fast
material = generic_cpe_plus_ultimaker3_AA_0.4
weight = -1
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = brim
brim_width = 7
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
cool_fan_speed = 1
cool_fan_speed_max = 80
cool_min_layer_time = 5
cool_min_speed = 6
infill_line_width = =round(line_width * 0.35 / 0.35, 2)
infill_overlap = 0
infill_pattern = triangles
infill_sparse_density = 20
infill_wipe_dist = 0
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.15
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.875
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.9
machine_nozzle_heat_up_speed = 1.4
material_bed_temperature = 107
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature + 10
material_print_temperature_layer_0 = =material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 17
prime_tower_wipe_enabled = True
retraction_amount = 7
retraction_combing = off
retraction_count_max = 25
retraction_extrusion_window = 1
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
skin_overlap = 20
speed_infill = =speed_print
speed_layer_0 = 20
speed_prime_tower = =speed_topbottom
speed_print = 45
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = =math.ceil(speed_print * 55 / 45)
speed_travel = 250
speed_wall = =math.ceil(speed_print * 45 / 45)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
speed_wall_x = =speed_wall
support_angle = 60
support_bottom_distance = =support_z_distance
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height
top_bottom_thickness = 1.2
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
wall_thickness = 1.3
[general]
version = 2
name = Fast Print
definition = ultimaker3
[metadata]
type = quality
quality_type = fast
material = generic_cpe_plus_ultimaker3_AA_0.4
weight = -1
[values]
acceleration_enabled = True
acceleration_print = 4000
cool_fan_speed_max = 80
cool_min_speed = 6
infill_line_width = =round(line_width * 0.35 / 0.35, 2)
infill_overlap = 0
infill_pattern = triangles
infill_wipe_dist = 0
jerk_enabled = True
jerk_print = 25
layer_height = 0.15
machine_min_cool_heat_time_window = 15
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 10
material_print_temperature_layer_0 = =material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 17
prime_tower_wipe_enabled = True
retraction_combing = off
retraction_extrusion_window = 1
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
skin_overlap = 20
speed_layer_0 = 20
speed_print = 45
speed_topbottom = =math.ceil(speed_print * 55 / 45)
speed_travel = 250
speed_wall = =math.ceil(speed_print * 45 / 45)
speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
support_bottom_distance = =support_z_distance
support_z_distance = =layer_height
travel_avoid_distance = 3
wall_0_inset = 0

146
resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
View file

@ -1,95 +1,51 @@
[general]
version = 2
name = High Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = high
material = generic_cpe_plus_ultimaker3_AA_0.4
weight = 1
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = brim
brim_width = 7
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
cool_fan_speed = 1
cool_fan_speed_max = 50
cool_min_layer_time = 5
cool_min_speed = 5
infill_line_width = =round(line_width * 0.35 / 0.35, 2)
infill_overlap = 0
infill_pattern = triangles
infill_sparse_density = 20
infill_wipe_dist = 0
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.06
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.875
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature = 107
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 17
prime_tower_wipe_enabled = True
retraction_amount = 7
retraction_combing = off
retraction_count_max = 25
retraction_extrusion_window = 1
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
skin_overlap = 20
speed_infill = =speed_print
speed_layer_0 = 20
speed_prime_tower = =speed_topbottom
speed_print = 40
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = =math.ceil(speed_print * 30 / 35)
speed_travel = 250
speed_wall = =math.ceil(speed_print * 35 / 40)
speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
speed_wall_x = =speed_wall
support_angle = 60
support_bottom_distance = =support_z_distance
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height
top_bottom_thickness = 1.2
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
wall_thickness = 1.3
[general]
version = 2
name = High Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = high
material = generic_cpe_plus_ultimaker3_AA_0.4
weight = 1
[values]
acceleration_enabled = True
acceleration_print = 4000
cool_fan_speed_max = 50
cool_min_speed = 5
infill_line_width = =round(line_width * 0.35 / 0.35, 2)
infill_overlap = 0
infill_pattern = triangles
infill_wipe_dist = 0
jerk_enabled = True
jerk_print = 25
layer_height = 0.06
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 17
prime_tower_wipe_enabled = True
retraction_combing = off
retraction_extrusion_window = 1
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
skin_overlap = 20
speed_layer_0 = 20
speed_print = 40
speed_topbottom = =math.ceil(speed_print * 30 / 35)
speed_travel = 250
speed_wall = =math.ceil(speed_print * 35 / 40)
speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
support_bottom_distance = =support_z_distance
support_z_distance = =layer_height
travel_avoid_distance = 3
wall_0_inset = 0

145
resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
View file

@ -1,95 +1,50 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = normal
material = generic_cpe_plus_ultimaker3_AA_0.4
weight = 0
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = brim
brim_width = 7
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
cool_fan_speed = 1
cool_fan_speed_max = 50
cool_min_layer_time = 5
cool_min_speed = 7
infill_line_width = =round(line_width * 0.35 / 0.35, 2)
infill_overlap = 0
infill_pattern = triangles
infill_sparse_density = 20
infill_wipe_dist = 0
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.1
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.875
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature = 107
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature + 5
material_print_temperature_layer_0 = =material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 17
prime_tower_wipe_enabled = True
retraction_amount = 7
retraction_combing = off
retraction_count_max = 25
retraction_extrusion_window = 1
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
skin_overlap = 20
speed_infill = =speed_print
speed_layer_0 = 20
speed_prime_tower = =speed_topbottom
speed_print = 40
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = =math.ceil(speed_print * 30 / 35)
speed_travel = 250
speed_wall = =math.ceil(speed_print * 35 / 40)
speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
speed_wall_x = =speed_wall
support_angle = 60
support_bottom_distance = =support_z_distance
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height
top_bottom_thickness = 1.2
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
wall_thickness = 1.3
[general]
version = 2
name = Normal Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = normal
material = generic_cpe_plus_ultimaker3_AA_0.4
weight = 0
[values]
acceleration_enabled = True
acceleration_print = 4000
cool_fan_speed_max = 50
cool_min_speed = 7
infill_line_width = =round(line_width * 0.35 / 0.35, 2)
infill_overlap = 0
infill_pattern = triangles
infill_wipe_dist = 0
jerk_enabled = True
jerk_print = 25
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 5
material_print_temperature_layer_0 = =material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 17
prime_tower_wipe_enabled = True
retraction_combing = off
retraction_extrusion_window = 1
retraction_hop = 0.2
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
skin_overlap = 20
speed_layer_0 = 20
speed_print = 40
speed_topbottom = =math.ceil(speed_print * 30 / 35)
speed_travel = 250
speed_wall = =math.ceil(speed_print * 35 / 40)
speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
support_bottom_distance = =support_z_distance
support_z_distance = =layer_height
travel_avoid_distance = 3
wall_0_inset = 0

179
resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
View file

@ -1,113 +1,66 @@
[general]
version = 2
name = Draft Print
definition = ultimaker3
[metadata]
type = quality
quality_type = draft
material = generic_pc_ultimaker3_AA_0.4
weight = -2
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = raft
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed = 0
cool_fan_speed_max = 90
cool_min_layer_time = 5
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 6
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
infill_overlap = 0
infill_overlap_mm = 0.05
infill_pattern = triangles
infill_sparse_density = 20
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.2
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.875
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature = 107
material_flow = 100
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature + 10
material_standby_temperature = 100
multiple_mesh_overlap = 0
ooze_shield_angle = 40
ooze_shield_dist = 2
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
raft_airgap = 0.25
raft_margin = 15
retraction_amount = 8
retraction_count_max = 80
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
retraction_speed = 35
skin_overlap = 30
speed_infill = =speed_print
speed_layer_0 = 25
speed_prime_tower = =speed_topbottom
speed_print = 50
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = 25
speed_travel = 250
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
speed_wall_x = =speed_wall
support_angle = 60
support_bottom_distance = =support_z_distance
support_infill_rate = 15
support_pattern = zigzag
support_roof_density = 100
support_roof_enable = False
support_roof_line_distance = 0.4
support_roof_pattern = lines
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height * 2
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 1.2
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
xy_offset = -0.15
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
wall_thickness = 1.2
[general]
version = 2
name = Draft Print
definition = ultimaker3
[metadata]
type = quality
quality_type = draft
material = generic_pc_ultimaker3_AA_0.4
weight = -2
[values]
acceleration_enabled = True
acceleration_print = 4000
adhesion_type = raft
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed_max = 90
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 6
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
infill_overlap = 0
infill_overlap_mm = 0.05
infill_pattern = triangles
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_print = 25
layer_height = 0.2
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 10
material_standby_temperature = 100
multiple_mesh_overlap = 0
ooze_shield_angle = 40
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
raft_airgap = 0.25
retraction_count_max = 80
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
skin_overlap = 30
speed_layer_0 = 25
speed_print = 50
speed_topbottom = 25
speed_travel = 250
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
support_bottom_distance = =support_z_distance
support_interface_line_distance = 0.4
support_interface_pattern = lines
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
travel_avoid_distance = 3
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
wall_thickness = 1.2
xy_offset = -0.15

177
resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
View file

@ -1,112 +1,65 @@
[general]
version = 2
name = Fast Print
definition = ultimaker3
[metadata]
type = quality
quality_type = fast
material = generic_pc_ultimaker3_AA_0.4
weight = -1
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = raft
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed = 0
cool_fan_speed_max = 85
cool_min_layer_time = 5
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 7
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
infill_overlap_mm = 0.05
infill_pattern = triangles
infill_sparse_density = 20
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.15
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.875
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature = 107
material_flow = 100
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature + 10
material_standby_temperature = 100
multiple_mesh_overlap = 0
ooze_shield_angle = 40
ooze_shield_dist = 2
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
raft_airgap = 0.25
raft_margin = 15
retraction_amount = 8
retraction_count_max = 80
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
retraction_speed = 35
skin_overlap = 30
speed_infill = =speed_print
speed_layer_0 = 25
speed_prime_tower = =speed_topbottom
speed_print = 50
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = 25
speed_travel = 250
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
speed_wall_x = =speed_wall
support_angle = 60
support_bottom_distance = =support_z_distance
support_infill_rate = 15
support_pattern = zigzag
support_roof_density = 100
support_roof_enable = False
support_roof_line_distance = 0.4
support_roof_pattern = lines
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height * 2
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 1.2
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
xy_offset = -0.15
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
wall_thickness = 1.2
[general]
version = 2
name = Fast Print
definition = ultimaker3
[metadata]
type = quality
quality_type = fast
material = generic_pc_ultimaker3_AA_0.4
weight = -1
[values]
acceleration_enabled = True
acceleration_print = 4000
adhesion_type = raft
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed_max = 85
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 7
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
infill_overlap_mm = 0.05
infill_pattern = triangles
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_print = 25
layer_height = 0.15
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 10
material_standby_temperature = 100
multiple_mesh_overlap = 0
ooze_shield_angle = 40
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
raft_airgap = 0.25
retraction_count_max = 80
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
skin_overlap = 30
speed_layer_0 = 25
speed_print = 50
speed_topbottom = 25
speed_travel = 250
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
support_bottom_distance = =support_z_distance
support_interface_line_distance = 0.4
support_interface_pattern = lines
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
travel_avoid_distance = 3
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
wall_thickness = 1.2
xy_offset = -0.15

180
resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
View file

@ -1,114 +1,66 @@
[general]
version = 2
name = High Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = high
material = generic_pc_ultimaker3_AA_0.4
weight = 1
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = raft
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed = 0
cool_fan_speed_max = 50
cool_min_layer_time = 5
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 8
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
infill_overlap = 0
infill_overlap_mm = 0.05
infill_pattern = triangles
infill_sparse_density = 20
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.06
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.875
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature = 107
material_flow = 100
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature - 10
material_standby_temperature = 100
multiple_mesh_overlap = 0
ooze_shield_angle = 40
ooze_shield_dist = 2
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
raft_airgap = 0.25
raft_margin = 15
retraction_amount = 8
retraction_count_max = 80
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
retraction_speed = 35
skin_overlap = 30
speed_infill = =speed_print
speed_layer_0 = 25
speed_prime_tower = =speed_topbottom
speed_print = 50
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = 25
speed_travel = 250
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
speed_wall_x = =speed_wall
support_angle = 60
support_bottom_distance = =support_z_distance
support_infill_rate = 15
support_pattern = zigzag
support_roof_density = 100
support_roof_enable = False
support_roof_line_distance = 0.4
support_roof_pattern = lines
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height * 2
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 1.2
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
xy_offset = -0.15
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
wall_thickness = 1.2
[general]
version = 2
name = High Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = high
material = generic_pc_ultimaker3_AA_0.4
weight = 1
[values]
acceleration_enabled = True
acceleration_print = 4000
adhesion_type = raft
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed_max = 50
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 8
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
infill_overlap = 0
infill_overlap_mm = 0.05
infill_pattern = triangles
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_print = 25
layer_height = 0.06
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature - 10
material_standby_temperature = 100
multiple_mesh_overlap = 0
ooze_shield_angle = 40
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
raft_airgap = 0.25
retraction_count_max = 80
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
skin_overlap = 30
speed_layer_0 = 25
speed_print = 50
speed_topbottom = 25
speed_travel = 250
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
support_bottom_distance = =support_z_distance
support_interface_line_distance = 0.4
support_interface_pattern = lines
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
travel_avoid_distance = 3
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
wall_thickness = 1.2
xy_offset = -0.15

177
resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
View file

@ -1,113 +1,64 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = normal
material = generic_pc_ultimaker3_AA_0.4
weight = 0
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = raft
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed = 0
cool_fan_speed_max = 50
cool_min_layer_time = 5
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 5
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
infill_overlap = 0
infill_overlap_mm = 0.05
infill_pattern = triangles
infill_sparse_density = 20
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.1
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.875
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature = 107
material_flow = 100
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
ooze_shield_angle = 40
ooze_shield_dist = 2
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
raft_airgap = 0.25
raft_margin = 15
retraction_amount = 8
retraction_count_max = 80
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
retraction_speed = 35
skin_overlap = 30
speed_infill = =speed_print
speed_layer_0 = 25
speed_prime_tower = =speed_topbottom
speed_print = 50
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = 25
speed_travel = 250
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
speed_wall_x = =speed_wall
support_angle = 60
support_bottom_distance = =support_z_distance
support_infill_rate = 15
support_pattern = zigzag
support_roof_density = 100
support_roof_enable = False
support_roof_line_distance = 0.4
support_roof_pattern = lines
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height * 2
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 1.2
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
xy_offset = -0.15
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
wall_thickness = 1.2
[general]
version = 2
name = Normal Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = normal
material = generic_pc_ultimaker3_AA_0.4
weight = 0
[values]
acceleration_enabled = True
acceleration_print = 4000
adhesion_type = raft
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed_max = 50
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 5
infill_line_width = =round(line_width * 0.4 / 0.35, 2)
infill_overlap = 0
infill_overlap_mm = 0.05
infill_pattern = triangles
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_print = 25
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_standby_temperature = 100
multiple_mesh_overlap = 0
ooze_shield_angle = 40
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
raft_airgap = 0.25
retraction_count_max = 80
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
skin_overlap = 30
speed_layer_0 = 25
speed_print = 50
speed_topbottom = 25
speed_travel = 250
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
support_bottom_distance = =support_z_distance
support_interface_line_distance = 0.4
support_interface_pattern = lines
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
travel_avoid_distance = 3
wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
wall_thickness = 1.2
xy_offset = -0.15

172
resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
View file

@ -1,106 +1,66 @@
[general]
version = 2
name = Draft Print
definition = ultimaker3
[metadata]
type = quality
quality_type = draft
material = generic_tpu_ultimaker3_AA_0.4
weight = -2
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = brim
brim_width = 8.75
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
cool_fan_speed = 20
cool_fan_speed_max = 100
cool_min_layer_time = 5
cool_min_layer_time_fan_speed_max = 6
cool_min_speed = 4
gradual_infill_step_height = =5 * layer_height
gradual_infill_steps = 4
infill_line_width = =round(line_width * 0.38 / 0.38, 2)
infill_overlap = 0
infill_pattern = tetrahedral
infill_sparse_density = 96
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.2
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.95
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature = 0
material_final_print_temperature = =material_print_temperature - 10
material_flow = 106
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =default_material_print_temperature + 2
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
retraction_amount = 6.5
retraction_count_max = 12
retraction_extra_prime_amount = 0.8
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
retraction_speed = 35
skin_overlap = 15
speed_equalize_flow_enabled = True
speed_infill = =speed_print
speed_layer_0 = 18
speed_prime_tower = =speed_topbottom
speed_print = 25
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel = 300
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
speed_wall_x = =speed_wall
support_angle = 50
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height * 2
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 0.7
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
wall_0_inset = 0
wall_line_width_x = =line_width
wall_thickness = 0.76
[general]
version = 2
name = Draft Print
definition = ultimaker3
[metadata]
type = quality
quality_type = draft
material = generic_tpu_ultimaker3_AA_0.4
weight = -2
[values]
acceleration_enabled = True
acceleration_print = 4000
brim_width = 8.75
cool_fan_speed_max = 100
cool_min_layer_time_fan_speed_max = 6
cool_min_speed = 4
gradual_infill_step_height = =5 * layer_height
gradual_infill_steps = 4
infill_line_width = =round(line_width * 0.38 / 0.38, 2)
infill_overlap = 0
infill_pattern = tetrahedral
infill_sparse_density = 96
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_print = 25
layer_height = 0.2
line_width = =machine_nozzle_size * 0.95
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_flow = 106
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =default_material_print_temperature + 2
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
retraction_count_max = 12
retraction_extra_prime_amount = 0.8
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
speed_equalize_flow_enabled = True
speed_layer_0 = 18
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel = 300
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 0.7
travel_avoid_distance = 3
wall_0_inset = 0
wall_line_width_x = =line_width
wall_thickness = 0.76

173
resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
View file

@ -1,106 +1,67 @@
[general]
version = 2
name = Fast Print
definition = ultimaker3
[metadata]
type = quality
quality_type = fast
material = generic_tpu_ultimaker3_AA_0.4
weight = -1
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = brim
brim_width = 8.75
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
cool_fan_speed = 20
cool_fan_speed_max = 100
cool_min_layer_time = 5
cool_min_layer_time_fan_speed_max = 6
cool_min_speed = 4
gradual_infill_step_height = =5 * layer_height
gradual_infill_steps = 4
infill_line_width = =round(line_width * 0.38 / 0.38, 2)
infill_overlap = 0
infill_pattern = tetrahedral
infill_sparse_density = 96
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.15
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.95
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature = 0
material_final_print_temperature = =material_print_temperature - 10
material_flow = 106
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =default_material_print_temperature + 2
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
retraction_amount = 7
retraction_count_max = 12
retraction_extra_prime_amount = 0.8
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
retraction_speed = 35
skin_overlap = 15
speed_equalize_flow_enabled = True
speed_infill = =speed_print
speed_layer_0 = 18
speed_prime_tower = =speed_topbottom
speed_print = 25
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel = 300
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
speed_wall_x = =speed_wall
support_angle = 50
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height * 2
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 0.7
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
wall_0_inset = 0
wall_line_width_x = =line_width
wall_thickness = 0.76
[general]
version = 2
name = Fast Print
definition = ultimaker3
[metadata]
type = quality
quality_type = fast
material = generic_tpu_ultimaker3_AA_0.4
weight = -1
[values]
acceleration_enabled = True
acceleration_print = 4000
brim_width = 8.75
cool_fan_speed_max = 100
cool_min_layer_time_fan_speed_max = 6
cool_min_speed = 4
gradual_infill_step_height = =5 * layer_height
gradual_infill_steps = 4
infill_line_width = =round(line_width * 0.38 / 0.38, 2)
infill_overlap = 0
infill_pattern = tetrahedral
infill_sparse_density = 96
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_print = 25
layer_height = 0.15
line_width = =machine_nozzle_size * 0.95
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_flow = 106
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =default_material_print_temperature + 2
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
retraction_amount = 7
retraction_count_max = 12
retraction_extra_prime_amount = 0.8
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
speed_equalize_flow_enabled = True
speed_layer_0 = 18
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel = 300
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 0.7
travel_avoid_distance = 3
wall_0_inset = 0
wall_line_width_x = =line_width
wall_thickness = 0.76

170
resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
View file

@ -1,106 +1,64 @@
[general]
version = 2
name = Normal Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = normal
material = generic_tpu_ultimaker3_AA_0.4
weight = 0
[values]
acceleration_enabled = True
acceleration_infill = =acceleration_print
acceleration_layer_0 = =acceleration_topbottom
acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_print = 4000
acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
acceleration_support_infill = =acceleration_support
acceleration_support_interface = =acceleration_topbottom
acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
acceleration_wall_x = =acceleration_wall
adhesion_type = brim
brim_width = 8.75
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
cool_fan_speed = 20
cool_fan_speed_max = 100
cool_min_layer_time = 5
cool_min_layer_time_fan_speed_max = 6
cool_min_speed = 4
gradual_infill_step_height = =5 * layer_height
gradual_infill_steps = 4
infill_line_width = =round(line_width * 0.38 / 0.38, 2)
infill_overlap = 0
infill_pattern = tetrahedral
infill_sparse_density = 96
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_infill = =jerk_print
jerk_layer_0 = =jerk_topbottom
jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
jerk_print = 25
jerk_support = =math.ceil(jerk_print * 15 / 25)
jerk_support_infill = =jerk_support
jerk_support_interface = =jerk_topbottom
jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
jerk_wall = =math.ceil(jerk_print * 10 / 25)
jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
jerk_wall_x = =jerk_wall
layer_height = 0.1
layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
line_width = =machine_nozzle_size * 0.95
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_bed_temperature = 0
material_final_print_temperature = =material_print_temperature - 10
material_flow = 106
material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =default_material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
retraction_amount = 6.5
retraction_count_max = 12
retraction_extra_prime_amount = 0.8
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
retraction_speed = 35
skin_overlap = 15
speed_equalize_flow_enabled = True
speed_infill = =speed_print
speed_layer_0 = 18
speed_prime_tower = =speed_topbottom
speed_print = 25
speed_support = =speed_wall_0
speed_support_interface = =speed_topbottom
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel = 300
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
speed_wall_x = =speed_wall
support_angle = 50
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance
support_xy_distance = =wall_line_width_0 * 2.5
support_xy_distance_overhang = =wall_line_width_0
support_z_distance = =layer_height * 2
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 0.7
travel_avoid_distance = 3
travel_compensate_overlapping_walls_enabled = True
wall_0_inset = 0
wall_line_width_x = =line_width
wall_thickness = 0.76
[general]
version = 2
name = Normal Quality
definition = ultimaker3
[metadata]
type = quality
quality_type = normal
material = generic_tpu_ultimaker3_AA_0.4
weight = 0
[values]
acceleration_enabled = True
acceleration_print = 4000
brim_width = 8.75
cool_fan_speed_max = 100
cool_min_layer_time_fan_speed_max = 6
cool_min_speed = 4
gradual_infill_step_height = =5 * layer_height
gradual_infill_steps = 4
infill_line_width = =round(line_width * 0.38 / 0.38, 2)
infill_overlap = 0
infill_pattern = tetrahedral
infill_sparse_density = 96
infill_wipe_dist = 0.1
jerk_enabled = True
jerk_print = 25
line_width = =machine_nozzle_size * 0.95
machine_min_cool_heat_time_window = 15
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_flow = 106
material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature_layer_0 = =default_material_print_temperature
material_standby_temperature = 100
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_size = 16
prime_tower_wipe_enabled = True
retraction_count_max = 12
retraction_extra_prime_amount = 0.8
retraction_extrusion_window = 1
retraction_hop = 2
retraction_hop_enabled = True
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
speed_equalize_flow_enabled = True
speed_layer_0 = 18
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel = 300
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50
switch_extruder_prime_speed = 15
switch_extruder_retraction_amount = 20
switch_extruder_retraction_speeds = 35
top_bottom_thickness = 0.7
travel_avoid_distance = 3
wall_0_inset = 0
wall_line_width_x = =line_width
wall_thickness = 0.76