Instead of using a separate function to force logging out before
login, login now has a boolean parameter that instructs it to logout
before loging in again, if the user is alread logged in. It then
starts the authorization with a force browser logout first.
CURA-7427
There are cases where Cura and the browser fall out of sync when it
comes to accounts. In such cases, you may be logged in cura with an
account that has no cloud printers and in the browser with an account
that has printers. So when you press the "Add cloud printer" button,
you are redirected to mycloud and you see cloud printers that are not
detected by Cura (because Cura is in a different acconut). In such
cases, the user can now press the "Sign in with a different account"
link in the "Waiting for cloud response" page, which will log him/her
out in Cura AND in the browser, and then reinitiate the whole
authorization flow, to make sure the accounts are in sync.
CURA-7427
Conflicts:
resources/quality/hms434/pla/hms434_0.4_pla_high.inst.cfg -> Setting version was updated at the same time.
resources/quality/hms434/pla/hms434_0.4_pla_normal.inst.cfg -> Deleted while we updated setting version.
resources/quality/hms434/pla/hms434_0.8_pla_coarse.inst.cfg -> Deleted while we updated setting version.
resources/quality/hms434/pla/hms434_0.8_pla_normal.inst.cfg -> Deleted while we updated setting version.
Due to a merge conflict that Git couldn't detect, these are immediately outdated. Let's update them to 15.
Since I knew this would be coming, I didn't change the maximum deviation last time, so now I also don't need to change it back.
Contributes to issue CURA-7384.
To Cura the folder doesn't matter. It only reads the filenames and uses those as unique IDs. So for these filenames we'd like to have an ID that is more speciic to this printer to prevent people from crashing.
I'm guessing that the author here already encountered that problem. He copied the files from Creality which has the same problem. However Creality profiles are already published and will be much harder to change the names since they would need to be changed in a version upgrade.
Contributes to issue CURA-7384.
This was copied from the error state, where it does matter, but the warning state is not shown if the setting is not enabled.
Contributes to issue CURA-7384.
Conflicts:
plugins/VersionUpgrade/VersionUpgrade460to462/VersionUpgrade460to462.py -> On master we removed the getCfgVersion function, while we moved the entire plug-in to a different folder in 4.6.
resources/definitions/skriware_2.def.json -> On master we merged a PR that changes more or less all settings, while on 4.6 we doubled the maximum deviation.
This definition specified that the maximum E speed is 25mm/s but then said that the retraction speed is 30mm/s. I've changed the maximum E speed to 30mm/s then because apparently that's what the definition author was testing with.
This definition specified that the maximum Z speed is 5mm/s but the default Z hop speed is 10mm/s. I've set the Z hop speed to 5mm/s because it was not initially overridden by the definition author, but apparently 5mm/s is the limit.
Contributes to issue CURA-7431.
Updated and condensed machine profiles. Edited formatting to make more sense and be consistent across all files. I3 printers present print to the front, CoreXY move to 0. Speeds are set per machine based orr factory firmware, which should provide more accurate "Estimated time" values "out of the box".
Overhauled all quality profiles to give a more fluid interface while choosing between 0.2 through 0.8 nozzles. Added a larger layer choice and rescaled the options per nozzle. Also included some small overrides based on material choice.
