Apply version upgrade maximum deviation change to built-in profiles

For some this is not exactly restored as their original since this setting is limited to micron precision as well.

Contributes to issue CURA-7420.
This commit is contained in:
Ghostkeeper 2020-05-08 11:15:55 +02:00
parent 3527c16716
commit 8f9408a76f
No known key found for this signature in database
GPG key ID: D2A8871EE34EC59A
6 changed files with 6 additions and 6 deletions

View file

@ -5983,7 +5983,7 @@
"description": "The maximum deviation allowed when reducing the resolution for the Maximum Resolution setting. If you increase this, the print will be less accurate, but the g-code will be smaller. Maximum Deviation is a limit for Maximum Resolution, so if the two conflict the Maximum Deviation will always be held true.",
"type": "float",
"unit": "mm",
"default_value": 0.05,
"default_value": 0.025,
"minimum_value": "0.001",
"minimum_value_warning": "0.01",
"maximum_value_warning": "0.3",

View file

@ -172,7 +172,7 @@
"meshfix_maximum_resolution": {"value": 0.01 },
"meshfix_maximum_travel_resolution":{"value": 0.1 },
"meshfix_maximum_deviation": {"value": 0.01 },
"meshfix_maximum_deviation": {"value": 0.005 },
"minimum_polygon_circumference": {"value": 0.05 },
"coasting_enable": {"value": false},

View file

@ -171,7 +171,7 @@
"value": "0.1"
},
"meshfix_maximum_deviation": {
"value": "0.003"
"value": "0.002"
},
"skin_outline_count": {
"value": 0

View file

@ -591,7 +591,7 @@
"value": "0.2"
},
"meshfix_maximum_deviation": {
"default_value": 0.005
"default_value": 0.003
},
"jerk_roofing": {
"value": "10"

View file

@ -155,7 +155,7 @@
"wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" },
"wall_thickness": { "value": "1" },
"meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
"meshfix_maximum_deviation": { "value": "layer_height / 2" },
"meshfix_maximum_deviation": { "value": "layer_height / 4" },
"optimize_wall_printing_order": { "value": "True" },
"retraction_combing": { "default_value": "all" },
"initial_layer_line_width_factor": { "value": "120" },

View file

@ -157,7 +157,7 @@
"wall_line_width_x": { "value": "round(line_width * 0.3 / 0.35, 2)" },
"wall_thickness": { "value": "1" },
"meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
"meshfix_maximum_deviation": { "value": "layer_height / 2" },
"meshfix_maximum_deviation": { "value": "layer_height / 4" },
"optimize_wall_printing_order": { "value": "True" },
"retraction_combing": { "default_value": "all" },
"initial_layer_line_width_factor": { "value": "120" },