Rijk van Manen
0222c79f59
increase initial layer skin flow
...
For large prints the initial layer skin flow turns out to be too low. PP-275
2022-11-09 16:26:56 +01:00
Remco Burema
c23b019f16
Couple support roof/floor wall-count to parent setting by default.
...
part of CURA-9350
2022-11-09 15:23:00 +01:00
Remco Burema
bcb88981b7
Add support interface wall count settings.
...
part of CURA-9350
2022-11-08 18:00:44 +01:00
Remco Burema
802effd805
The engine now operataes on the area _before_ the offset.
...
The frontend should compensate for that: Do _not_ apply the formula, as this now happens implicitly.
CURA-9548
2022-11-08 15:11:59 +01:00
Ed Ropple
226dbe57a1
changed cr10smart to refer to creality_base for 5.2.1 compat
2022-11-02 18:24:11 -04:00
Ed Ropple
46d76edc20
renamed .json to .def.json
2022-11-02 18:16:20 -04:00
Ed Ropple
d653736325
fixed bed dimensions of Sovol SV01 and SV02
2022-11-02 01:14:09 -04:00
Ed Ropple
dbcf6afd20
added definition and variants or Creality CR-10 Smart
2022-11-02 01:11:10 -04:00
Remco Burema
f75cb7a48b
Merge pull request #11678 from Ultimaker/brim_per_material_optimized_order
...
Brim overhaul: New features and bug fixes
2022-10-30 17:59:36 +01:00
Jaime van Kessel
5c18a37f60
Merge branch 'main' of github.com:Ultimaker/Cura into PP-251_create_annealing_intent
2022-10-26 11:28:58 +02:00
Luke Harrison
225fed0519
More tweaks because I am bored and it has not been merged yet.
2022-10-25 22:18:34 +02:00
Remco Burema
ab51bd699e
Merge branch 'main' into brim_per_material_optimized_order
2022-10-25 17:31:13 +02:00
Christian Kvasny
53e163011e
Update vzbot_base.def.json
...
Adjusted some default values
2022-10-25 11:34:17 +02:00
just-trey
8f0b116df4
changed max speed warning
2022-10-24 10:46:46 -04:00
Luke Harrison
09f620e6ce
Dial back iniital layer speed
2022-10-24 14:12:49 +02:00
Luke Harrison
50e22a122a
More small tweaks
2022-10-24 13:18:27 +02:00
Luke Harrison
00e7a20d32
Small settings tweaks. Here's hoping for a 5.2.2 merge
2022-10-24 12:41:57 +02:00
just-trey
6e5e3db627
Add AnkerMake M5 Profile
2022-10-22 19:56:51 -04:00
Rijk van Manen
d5020425bc
fix mistakes
...
PP-42
2022-10-17 15:55:03 +02:00
Rijk van Manen
7612faea79
make initial flow settings a fraction of the initial layer flow
...
PP-42
2022-10-17 14:51:05 +02:00
Rijk van Manen
9f6a47f04a
Merge branch 'main' into PP-42_improved_initial_layer_settings
2022-10-17 13:51:20 +02:00
Duarte Bragadesto
5a05f8ed4c
Update resources/definitions/blocks_pros30.def.json
...
Co-authored-by: Jaime van Kessel <nallath@gmail.com>
2022-10-14 17:42:17 +01:00
Duarte Bragadesto
a70c773ae2
Definition Blocks Files
2022-10-14 17:33:41 +01:00
Mehmet Sutaş
d524a2f491
Merge branch 'Ultimaker:main' into main
2022-10-14 12:58:38 +03:00
0r31
975734290f
Set infill_before_walls and inset_direction defaults
2022-10-11 12:38:16 +02:00
Luke Harrison
f638942dd5
Added the Hurakan
2022-10-09 22:38:15 +02:00
0r31
0c81010681
Set value (not default_value) of speed_travel
2022-10-07 16:48:55 +02:00
0r31
8a65e8d318
Introduces Dagoma Sigma printer and enhance Pro430 profiles (definitions, variants, qualities)
2022-10-07 16:32:16 +02:00
Remco Burema
1e1ec7c6e5
For tree support default should be support wall count 1.
...
part of CURA-7800
2022-10-06 22:23:24 +02:00
Rijk van Manen
c90c7e688a
fix cool fan mistake
...
PP-42
2022-10-06 16:23:31 +02:00
Rijk van Manen
27d56d378e
improve initial layer settings
...
ultimaker.def.json is also cleaned and put in alphabetic order.
Ultimaker 2 and original are kept mostly as they were, since they are not tested. PP-42
2022-10-06 16:11:04 +02:00
Paul Kuiper
f3b9c73d0f
Create a resolve function on the "support_enable" setting such that underlying extruders (and thus also intent profiles) can enable support.
...
Relates to PP-251
2022-10-05 21:03:17 +02:00
Anson Liu
1b705338b8
Updated dual extruder start and end gcode
2022-10-05 13:04:04 -04:00
Anson Liu
f1fc0b44f7
Updated start and end gcode
2022-10-05 13:03:39 -04:00
Anson Liu
66ddf297b7
Merge branch 'Ultimaker:main' into dxu_umo_definition
2022-10-05 13:03:02 -04:00
c.lamboo
b33cff33f5
Disable "Remove Raft Inside Corners" setting by default
2022-10-03 11:28:22 +02:00
c.lamboo
a2c85dced9
Revert "Enable zigzag instead of the lines paatern on the skin layers. This improves print speed and quality. I used to decrease bridging quality, but due to enabling experimental bridging in the print profiles this can now be used."
...
This reverts commit 863e1ecbae
2022-09-29 16:09:00 +02:00
Anson Liu
4830eb8f5a
Update nozzle heat up speed
2022-09-20 09:37:23 -04:00
Anson Liu
4201305712
Update nozzle heat up speed
2022-09-20 09:37:00 -04:00
Jaime van Kessel
d8f304ca49
Fix description of wall_x_material_flow_layer_0
...
CURA-9433
2022-09-20 14:13:00 +02:00
Jaime van Kessel
d64b07d11f
Revert "Pp 230 enable conical support ( #13295 )"
...
This reverts commit 47b414a4ae
2022-09-20 13:43:02 +02:00
Mehmet Sutaş
d38a0bb628
Merge branch 'main' into main
2022-09-20 10:14:51 +03:00
Mehmet Sutaş
b9ee978ead
Revert "Remove material exclusions"
...
This reverts commit 5fa113fef5
2022-09-20 10:08:24 +03:00
Jaime van Kessel
ac804389f6
Apply suggestions from code review
...
CURA-9433
Co-authored-by: Casper Lamboo <c.lamboo@ultimaker.com>
2022-09-19 17:18:09 +02:00
Jaime van Kessel
a53c9636af
Add initial layer flow settings
...
CURA-9433
2022-09-19 13:08:13 +02:00
izilzty
f3c95d3808
Fix speed_travel value
2022-09-19 17:16:25 +08:00
izilzty
f18c66ef40
Update setting_version and format json file
2022-09-17 17:02:53 +08:00
goofoo3d
d6bc4067f9
Add some Renkforce Machines ( #12598 )
...
Add goofoo, renkforce printf
Co-authored-by: laiqiqi <laiqiqi886@163.com>
2022-09-16 10:14:03 +02:00
Jaime van Kessel
ceb5fe75cf
Update the settings for cremaker as suggested in #12511
2022-09-15 16:36:42 +02:00
Jaime van Kessel
3ac31f410f
Merge pull request #13222 from NOVAXIM/patch-1
...
Update anycubic_mega_zero.def.json
2022-09-15 16:19:31 +02:00
