Revert "Remove material exclusions"

This reverts commit 5fa113fef5.

resources/definitions/rigid3d_base.def.json

@@ -16,7 +16,63 @@
         "first_start_actions": ["MachineSettingsAction"],
         "supported_actions":   ["MachineSettingsAction"],
 
-        "preferred_material": "generic_pla_175"
+        "preferred_material": "generic_pla_175",
+        "exclude_materials": [
+            "3D-Fuel_PLA_PRO_Black", "3D-Fuel_PLA_SnapSupport",
+            "bestfilament_abs_skyblue", "bestfilament_petg_orange", "bestfilament_pla_green",
+            "chromatik_pla",
+            "dsm_arnitel2045_175", "dsm_novamid1070_175",
+            "emotiontech_abs", "emotiontech_absx", "emotiontech_acetate", "emotiontech_bvoh", "emotiontech_asax",
+            "emotiontech_bvoh", "emotiontech_copa", "emotiontech_hips", "emotiontech_nylon_1030", 
+            "emotiontech_nylon_1030cf", "emotiontech_nylon_1070","emotiontech_pc", "emotiontech_petg",
+            "emotiontech_pla", "emotiontech_pla_hr_870", "emotiontech_pva-m", "emotiontech_pva-oks",
+            "emotiontech_pva-s", "emotiontech_tpu98a", "emotiontech_pekk",
+            "eryone_petg", "eryone_pla", "eryone_pla_glow", "eryone_pla_matte", "eryone_pla_wood",
+            "eSUN_PETG_Black", "eSUN_PETG_Grey", "eSUN_PETG_Purple", "eSUN_PLA_PRO_Black", "eSUN_PLA_PRO_Grey", "eSUN_PLA_PRO_Purple", "eSUN_PLA_PRO_White",
+            "Extrudr_GreenTECPro_Anthracite_175", "Extrudr_GreenTECPro_Black_175", "Extrudr_GreenTECPro_Blue_175", "Extrudr_GreenTECPro_Nature_175",
+            "Extrudr_GreenTECPro_Red_175", "Extrudr_GreenTECPro_Silver_175", "Extrudr_GreenTECPro_White_175",
+            "fabtotum_abs", "fabtotum_nylon", "fabtotum_pla", "fabtotum_tpu",
+            "fdplast_pla_olive", "fdplast_abs_tomato", "fdplast_petg_gray",
+            "fiberlogy_hd_pla",
+            "filo3d_pla", "filo3d_pla_green", "filo3d_pla_red",
+            "generic_abs", "generic_bam", "generic_cffcpe", "generic_cffpa", "generic_cpe", "generic_cpe_plus",
+            "generic_gffcpe", "generic_gffpa", "generic_hips", "generic_nylon", "generic_pc", "generic_petg",
+            "generic_pla", "generic_pp", "generic_pva", "generic_tough_pla", "generic_tpu",
+            "goofoo_abs", "goofoo_asa", "goofoo_bronze_pla", "goofoo_emarble_pla", "goofoo_esilk_pla", "goofoo_hips", "goofoo_pa", "goofoo_pa_cf", "goofoo_pc",
+            "goofoo_peek", "goofoo_petg", "goofoo_pla", "goofoo_pva", "goofoo_tpe_83a", "goofoo_tpu_87a", "goofoo_tpu_95a", "goofoo_wood_pla",
+            "imade3d_petg_175", "imade3d_pla_175",
+            "innofill_innoflex60_175",
+            "layer_one_white_pla", "layer_one_black_pla", "layer_one_dark_gray_pla",
+            "leapfrog_abs_natural", "leapfrog_epla_natural", "leapfrog_pva_natural",
+            "octofiber_pla",
+            "polyflex_pla", "polymax_pla", "polyplus_pla", "polywood_pla",
+            "redd_abs", "redd_asa", "redd_hips", "redd_nylon", "redd_petg", "redd_pla", "redd_tpe",
+            "structur3d_dap100silicone",
+            "tizyx_abs", "tizyx_flex", "tizyx_petg", "tizyx_pla", "tizyx_pla_bois", "tizyx_pva",
+            "ultimaker_abs_black", "ultimaker_abs_blue", "ultimaker_abs_green", "ultimaker_abs_grey",
+            "ultimaker_abs_orange", "ultimaker_abs_pearl-gold", "ultimaker_abs_red", "ultimaker_abs_silver-metallic",
+            "ultimaker_abs_white", "ultimaker_abs_yellow", "ultimaker_bam", "ultimaker_cpe_black",
+            "ultimaker_cpe_blue", "ultimaker_cpe_dark-grey", "ultimaker_cpe_green", "ultimaker_cpe_light-grey",
+            "ultimaker_cpe_plus_black", "ultimaker_cpe_plus_transparent", "ultimaker_cpe_plus_white",
+            "ultimaker_cpe_red", "ultimaker_cpe_transparent", "ultimaker_cpe_white", "ultimaker_cpe_yellow",
+            "ultimaker_nylon_black", "ultimaker_nylon_transparent", "ultimaker_pc_black", "ultimaker_pc_transparent",
+            "ultimaker_pc_white", "ultimaker_pla_black", "ultimaker_pla_blue", "ultimaker_pla_green",
+            "ultimaker_pla_magenta", "ultimaker_pla_orange", "ultimaker_pla_pearl-white", "ultimaker_pla_red",
+            "ultimaker_pla_silver-metallic", "ultimaker_pla_transparent", "ultimaker_pla_white", "ultimaker_pla_yellow",
+            "ultimaker_pp_transparent", "ultimaker_pva", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green",
+            "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "ultimaker_tpu_black", "ultimaker_tpu_blue",
+            "ultimaker_tpu_red", "ultimaker_tpu_white",
+            "verbatim_bvoh_175",
+            "Vertex_Delta_ABS", "Vertex_Delta_PET", "Vertex_Delta_PLA", "Vertex_Delta_PLA_Glitter",
+            "Vertex_Delta_PLA_Mat", "Vertex_Delta_PLA_Satin", "Vertex_Delta_PLA_Wood", "Vertex_Delta_TPU",
+            "volumic_support_ultra", "volumic_abs_ultra", "volumic_arma_ultra", "volumic_asa_ultra", "volumic_br80_ultra",
+            "volumic_bumper_ultra", "volumic_cu80_ultra", "volumic_flex93_ultra", "volumic_medical_ultra",
+            "volumic_nylon_ultra", "volumic_pekk_carbone", "volumic_petg_ultra", "volumic_petgcarbone_ultra",
+            "volumic_pla_ultra", "volumic_pp_ultra", "volumic_strong_ultra",
+            "xyzprinting_abs", "xyzprinting_antibact_pla", "xyzprinting_carbon_fiber", "xyzprinting_colorinkjet_pla", "xyzprinting_flexible", "xyzprinting_metallic_pla",
+            "xyzprinting_nylon", "xyzprinting_petg", "xyzprinting_pla", "xyzprinting_tough_pla", "xyzprinting_tpu",
+            "zyyx_pro_flex", "zyyx_pro_pla"
+        ]
     },
     "overrides": {
         "machine_name": { "default_value": "Rigid3D Base Printer" },
@@ -38,7 +94,7 @@
         "machine_max_jerk_z": { "value": 0.3 },
         "machine_max_jerk_e": { "value": 5 },
 
-        "wall_0_wipe_dist": { "value": 0.0 },
+
         "optimize_wall_printing_order": { "value": "True" },
         "inset_direction": { "value": "'outside_in'" },
         "xy_offset_layer_0": { "value": -0.2 },
@@ -49,7 +105,7 @@
         "skin_monotonic": { "value": "True" },
         "expand_skins_expand_distance": { "value": 0.3 },
         "infill_sparse_density": { "value": 10 },
-        "infill_pattern": { "value": "'lines'" },
+        "infill_pattern": { "value": "'zigzag'" },
 
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": "material_print_temperature" },
@@ -71,10 +127,10 @@
         "acceleration_enabled": { "value": "False" },
         "jerk_enabled": { "value": "False" },
 
-        "retraction_amount": { "value": 1.0 },
+        "retraction_amount": { "value": 1.5 },
         "retraction_min_travel": { "value": 1.5 },
         "travel_retract_before_outer_wall": { "value": "True" },
-        "retraction_combing": { "value": "'off'" },
+        "retraction_combing": { "value": "'all'" },
         "retraction_combing_max_distance": { "value": 30 },
 
         "support_wall_count": { "value": 1 },