3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-08-05 04:54:04 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 11

increase initial layer skin flow

Browse source 
For large prints the initial layer skin flow turns out to be too low. PP-275
This commit is contained in:
Rijk van Manen 2022-11-09 16:26:56 +01:00
parent db57c8fb43
commit 0222c79f59
1 changed files with 1 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

2
resources/definitions/ultimaker.def.json
View file

@ -93,7 +93,7 @@
"skin_angles": { "value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]" },
"skin_edge_support_thickness": { "value": "4 * layer_height if infill_sparse_density < 30 else 0" },
"skin_material_flow": { "value": "0.95 * material_flow" },
"skin_material_flow_layer_0": { "value": "0.80 * material_flow_layer_0" },
"skin_material_flow_layer_0": { "value": "0.85 * material_flow_layer_0" },
"skin_monotonic" : { "value": "roofing_layer_count == 0" },
"speed_equalize_flow_width_factor": { "value": "110.0" },
"speed_layer_0": { "value": "min(30, layer_height / layer_height_0 * speed_wall_0)" },