# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: add feature kvm_pv_unhalt
linux-headers: update to 3.12-rc1
target-i386: forward CPUID cache leaves when -cpu host is used
linux-headers: update to 3.11
kvm: fix traces to use %x instead of %d
kvmvapic: Clear also physical ROM address when entering INACTIVE state
kvmvapic: Enter inactive state on hardware reset
kvmvapic: Catch invalid ROM size
kvm irqfd: support direct msimessage to irq translation
fix steal time MSR vmsd callback to proper opaque type
kvm: warn if num cpus is greater than num recommended
cpu: Move cpu state syncs up into cpu_dump_state()
exec: always use MADV_DONTFORK
Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
# By Hervé Poussineau (5) and Stefan Weil (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi
lsi: add 53C810 variant
lsi: remove todo
lsi: ignore write accesses to CTEST0 registers
lsi: check ssid versus sdid only if ssid is valid
lsi: use constant name instead of its value
This patch implements the NetClientInfo.receive_iov method for the
e1000 device emulation. In this way a network backend that uses
qemu_sendv_packet() can deliver the fragmented packet without
requiring an additional copy in the frontend/backend network code
(nc_sendv_compat() function).
The existing method NetClientInfo.receive has been reimplemented
using the new method.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that the memory subsystem is propagating the endianness correctly,
the pcnet-pci device should have its I/O ports and MMIO memory marked
as LITTLE_ENDIAN, as PCI devices are little endian.
This makes the pcnet-pci NIC to work again on big endian MIPS Malta
(default NIC).
Cc: qemu-stable@nongnu.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following sequence happens:
- the SeaBIOS virtio-blk driver does not support the WCE feature, which
causes QEMU to disable writeback caching
- the Linux virtio-blk driver resets the device, finds WCE is available
but writeback caching is disabled; tells block layer to not send cache
flush commands
- the Linux virtio-blk driver sets the DRIVER_OK bit, which causes
writeback caching to be re-enabled, but the Linux virtio-blk driver does
not know of this side effect and cache flushes remain disabled
The bug is at the third step. If the guest does know about CONFIG_WCE,
QEMU should ignore the WCE feature's state. The guest will control the
cache mode solely using configuration space. This change makes Linux
do flushes correctly, but Linux will keep SeaBIOS's writethrough mode.
Hence, whenever the guest is reset, the cache mode of the disk should
be reset to whatever was specified in the "-drive" option. With this
change, the Linux virtio-blk driver finds that writeback caching is
enabled, and tells the block layer to send cache flush commands
appropriately.
Reported-by: Rusty Russell <rusty@au1.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Report from clang analyzer:
clock.c:42:15: warning:
Value stored to 'cpu' during its initialization is never read
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add simple support for SCLP line-mode also known as operating
system messages. This can be added in addition to or instead of
the SCLP full screen console with -device sclplmconsole.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently all handlers (quiesce, console) only handle one event type.
Some drivers will handle multiple (compatible) event types. Rework the
code accordingly.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
The event_type variable is never used. Get rid of it.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Make the handler for SCLP Read Event Data deal with notifications
for multiple sources correctly.
Signed-off-by: Ralf Hoppe <rhoppe@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split bigger patch into smaller independent chunks]
Reviewed-by: Alexander Graf <agraf@suse.de>
Add reset() functions for event-facility, sclpconsole, and sclpquiesce.
The reset() functions perform variable initialization
at IPL and e.g. when monitor system_reset is called.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds the necessary life migration pieces to sclpquiesce
by using the vmstate_register.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch adds the necessary life migration pieces to the sclp code
by using vmstate_register.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
To use VMState for migration, we need to adapt some sclp code:
- allocate console buffer as part of the console
- change semantic of sclpconsole offset fields
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
To avoid misinterpreting INACTIVE after migration as old qemu-kvm's
STANDBY, also clear rom_state_paddr when going back to this state.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ROM layout may change after reset of devices are hotplugged, so we have
to pick up the physical address again when the ROM is initialized. This
is best achieved by resetting the state to INACTIVE.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If not caught early, a zero-length ROM will cause a NULL-pointer access
later on in patch_hypercalls when allocating a zero-length ROM copy and
trying to read from it.
CC: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The USBPacket-s in the transfers need to be cleaned up so that the memory
allocated by the iovec in there gets freed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
And use it instead of prying the USBEndpoint out of the packet struct
in various places.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Transfers are part of an epctx, which is part of a slot, which is part of
a xhci. Transfers cannot dynamically be moved from one epctx to another,
so once created their xhci, slotid and epid are constant, so lets set these
up at creation time, rather then re-initializing them with the same
value each time a transfer gets submitted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the xhci spec the total number of streams is
2 ^ (MaxPStreams + 1), and this is also how the Linux xhci driver
uses this field.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The usb-host code has been rewritten for qemu 1.5 to use libusb,
the old code has been left in as temporary fallback. Now we are
two releases further out, targeting the 1.7 release. No major
issues with the new code poped up until now. Time to remove it
from tre tree. Should we ever need it again for some reason --
git has a copy for us in the history.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Nowdays rom size is fixed at 8192 for live migration compat reasons.
So we can ditch the pointless math trying to calculate the size needed.
Also make the size sanity check fail at compile time not runtime.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
# By Max Reitz (16) and others
# Via Kevin Wolf
* kwolf/for-anthony: (33 commits)
qemu-iotests: Fix test 038
block: Assert validity of BdrvActionOps
qemu-iotests: Cleanup test image in test number 007
qemu-img: fix invalid JSON
coroutine: add ./configure --disable-coroutine-pool
qemu-iotests: Adjustments due to error propagation
qcow2: Use Error parameter
qemu-img create: Emit filename on error
block: Error parameter for create functions
block: Error parameter for open functions
bdrv: Use "Error" for creating images
bdrv: Use "Error" for opening images
qemu-iotests: add 057 internal snapshot for block device test case
hmp: add interface hmp_snapshot_delete_blkdev_internal
hmp: add interface hmp_snapshot_blkdev_internal
qmp: add interface blockdev-snapshot-delete-internal-sync
qmp: add interface blockdev-snapshot-internal-sync
qmp: add internal snapshot support in qmp_transaction
snapshot: distinguish id and name in snapshot delete
snapshot: new function bdrv_snapshot_find_by_id_and_name()
...
Message-id: 1379073063-14963-1-git-send-email-kwolf@redhat.com
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
spapr-vscsi: Report error on unsupported MAD requests
spapr-vscsi: Adding VSCSI capabilities
iscsi: split discard requests in multiple parts
iscsi: add .bdrv_get_block_status
iscsi: add logical block provisioning information to iscsilun
hw/scsi/lsi53c895a: Use deposit32 rather than handcoded shift/mask
hw/scsi/lsi53c895a: Use sextract32 for sign-extension
scsi: Fix scsi_bus_legacy_add_drive() scsi-generic with serial
virtio-scsi: Make type virtio-scsi-common abstract
spapr-vscsi: add task management
scsi: prefer UUID to VM name for the initiator name
Message-id: 1378984634-765-1-git-send-email-pbonzini@redhat.com
Currently, treat it exactly as a 53C895A.
53C895A is a 53C810 with more capabilities, so this should work.
However, this lets us test different code paths on Linux, which
don't use lastest features if it detect a 810, or on some OSes
which only support 810 and not 895A (like very old Windows NT
versions).
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LSI emulation has been tested with Linux on PPC platform.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
53C895A datasheet says that this register is read/write, and that the value
returned on read access is dependant of DMA FIFO state. However, nothing is
said for written value.
53C810A datasheet gives more insight about this register:
"This was a general purpose read/write register in previous SYM53C8XX
family chips. Although it is still a read/write register, Symbios reserves
the right to use these bits for future 53C8XX family enhancements."
This prevents going to the default case, which prints an error message.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This prevents some (invalid) error messages on console.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This check is useless, as bigger addresses will be ignored when
added to 'io' MemoryRegion, which has a size of 64K.
However, some architectures don't use the 'io' MemoryRegion, like
the alpha and versatile platforms. They create a PCI I/O region
bigger than 64K, so let them handle PCI I/O BARs in the higher range.
MST: reinstated work-around for BAR sizing.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
io base register at 0x40 is cleared on reset,
but io is not disabled until some other event
happens to call pm_io_space_update.
Invoke pm_io_space_update directly to make this
consistent.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For Q35, MMCFG address and size are guest configurable.
Update w32 property to make it behave accordingly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The existing driver just dropped unsupported requests. This adds error
responses to those unhandled requests.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements capabilities exchange between vscsi host and client. As
at the moment no capability is supported, put zero flags everywhere and
return.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use deposit32() rather than handcoded shifts/masks to update the
scratch registers. This is cleaner and incidentally avoids a clang
sanitizer complaint ("runtime error: left shift of 255 by 24 places
cannot be represented in type 'int'").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use sextract32() for doing sign-extension rather than rolling
our own implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
