Finally, complete the fully specified interface. msix_add_config()
gets folded into msix_init() because we now have quite a few parameters
to pass and rolling it in let's us error earlier, avoiding the ugly
unwind exit path. msix_mmio_setup() also gets rolled in, just because
it's redundant to rediscover offsets when we already have them for
such a tiny function.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These don't have to be contiguous. Size them to only what
they need and use separate MemoryRegions for the vector
table and PBA.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MSIX, like PCI, is little endian. Specifying native is wrong here,
but we need to check the rest of the file to determine if it's
as simple as flipping this macro.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
What's this doing so far from msix_mmio_ops?
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Trivial conversion, failed to have an uninit before and after.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msi_init() takes over a BAR without really specifying or allowing
specification of how it does so. Instead, let's split it into
two interfaces, one fully specified, and one trivially easy. This
implements the latter. msix_init_exclusive_bar() takes over
allocating and filling a PCI BAR _exclusively_ for the use of MSIX.
When used, the matching msi_uninit_exclusive_bar() should be used
to tear it down.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msix.h calls the PCIDevice * parameter "dev" almost everywhere except
the msix_write_config declaration. Fix the inconsistency.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No user in sight for msix_bar_size.
bar_size for all users is aligned, let's simply
require this instead of trying to fix up invalid input.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After setting a balloon target value, applications have to
continually poll 'query-balloon' to determine whether the
guest has reacted to this request. The virtio-balloon backend
knows exactly when the guest has reacted though, and thus it
is possible to emit a JSON event to tell the mgmt application
whenever the guest balloon changes.
This introduces a new 'qemu_balloon_changed()' API which is
to be called by balloon driver backends, whenever they have
a change in balloon value. This takes the 'actual' balloon
value, as would be found in the BalloonInfo struct.
The qemu_balloon_change API emits a JSON monitor event which
looks like:
{"timestamp": {"seconds": 1337162462, "microseconds": 814521},
"event": "BALLOON_CHANGE", "data": {"actual": 944766976}}
* balloon.c, balloon.h: Introduce qemu_balloon_changed() for
emitting balloon change events on the monitor
* hw/virtio-balloon.c: Invoke qemu_balloon_changed() whenever
the guest changes the balloon actual value
* monitor.c, monitor.h: Define QEVENT_BALLOON_CHANGE
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The Windows uses 'READ' command at the start of an instalation
without checking the 'dir' register. We have to abort the transfer
with an abnormal termination if there is no media in the drive.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
First offender is xen_config_dev_blk()'s use of disk->bdrv->filename.
Get the filename from disk->opts instead. Same result, except for
snapshots: there, we now get the filename specified by the user
instead of the name of the temporary image created by bdrv_open().
Should be an improvement.
Second offender is blk_init()'s use of blkdev->bs->drv->format_name.
Simply use the appropriate interface to get the format name.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A "top" BlockDriverState has a non-empty device_name. If the user
doesn't specify one with -drive parameter id, the system supplies a
default name.
xen_config_dev_blk() changes this name, during machine initialization.
Naughty. Don't do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Enabling or disabling the write cache is done with the SET FEATURES
command. The command can be issued with sg_sat_set_features from
sg3-utils.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use the appropriate interface instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This should fix the following build failure:
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c: In function 'lx_init':
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: warning: implicit declaration of function 'drive_get'
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: warning: nested extern declaration of 'drive_get'
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: error: 'IF_PFLASH' undeclared (first use in this function)
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: error: (Each undeclared identifier is reported only once
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: error: for each function it appears in.)
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:216: error: dereferencing pointer to incomplete type
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Changed device name to xlnx,axi-dma. This is the exact name of the device in the
Xilinx EDK development tools.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Changed device name to xlnx,axi-ethernet. This is the exact name of the
device in the xilinx EDK development tools.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Even though the xilinx tools do have C_ on all params by default, drop this
for consistency with all the other xilinx IP (I.E. param names are the xilinx
names without the C_ prefix)
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Changed device name to xlnx,xps-ethernetlite. This is the exact name of the
device in the xilinx EDK development tools.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Changed "txpingpong" prop to "tx-ping-pong". Same for rx. This is done to
make the property name exactly match what is output by the xilinx tools for
this IP.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Changed device name to xlnx,xps-intc. This is the exact name of the device
in the xilinx EDK development tools.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Changed device name to xlnx,xps-timer. This is the exact name of the device
in the xilinx EDK development tools.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The configurable property for this IP in the Xilinx tools is a boolean switch
"one-timer-only" that flicks this timer from being dual channel to single.
Updated QEMU to work the same way for better match with the IP core and its TRM.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Added a reasonable default frequency for the xilinx timer (the 62MHz from
s3adsp machine model).
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Changed device name to xlnx,xps-uartlite. This is the exact name of the device
in the xilinx EDK development tools.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The axidma irq orders are reversed in both the device model and the instantion.
Undid both reversal (for no net change). Also needs to be reversed for
consistency with Xilinx tools IRQ listing.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Speeds up the build.
xilinx_ethlite uses tswap32() and is thus target-dependent.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Currently, we do not properly cleanup, if pci_bridge_dev_initfn
fails to initialize properly. Make sure to call pci_bridge_exitfn()
in the error path.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While looking into hot-plugging bridges, I can create a qemu segfault via:
$ device_add pci-bridge
Bridge chassis not specified. Each bridge is required to be assigned a unique chassis id > 0.
**
ERROR:qom/object.c:389:object_delete: assertion failed: (obj->ref == 0)
I'm proposing to fix this by adding a call to 'object_unparent()', before the
call to qdev_free(). I see there is already a precedent for this usage pattern as
seen in qdev_simple_unplug_cb():
/* can be used as ->unplug() callback for the simple cases */
int qdev_simple_unplug_cb(DeviceState *dev)
{
/* just zap it */
object_unparent(OBJECT(dev));
qdev_free(dev);
return 0;
}
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.
Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes. Rename it to soffset, to make it clear
that the offset is applied to src.
Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.
One added restriction: as for all other iovec-related
functions, soffset must point inside src.
Order of argumens is already good:
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes)
vs:
qemu_iovec_concat(QEMUIOVector *dst,
QEMUIOVector *src,
size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).
Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat. So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* afaerber-or/qom-cpu-3a: (27 commits)
target-s390x: Pass S390CPU to s390_cpu_restart()
s390-virtio: Let s390_cpu_addr2state() return S390CPU
s390-virtio: Use cpu_s390x_init() to obtain S390CPU
target-s390x: Let cpu_s390x_init() return S390CPU
xen_machine_pv: Use cpu_x86_init() to obtain X86CPU
arm_pic: Pass ARMCPU to arm_pic_init_cpu()
arm_boot: Pass ARMCPU to arm_load_kernel()
xilinx_zynq: Use cpu_arm_init() to obtain ARMCPU
pxa2xx_gpio: Store ARMCPU in PXA2xxGPIOInfo
pxa2xx_pic: Store ARMCPU in PXA2xxPICState
pxa2xx: Pass ARMCPU to pxa2xx_pic_init()
exynos4210: Use cpu_arm_init() to store ARMCPU
vexpress: Use cpu_arm_init() to obtain ARMCPU
realview: Use cpu_arm_init() to obtain ARMCPU
arm_boot: Pass ARMCPU to arm_boot_info::secondary_cpu_reset_hook()
arm_boot: Pass ARMCPU to arm_boot_info::write_secondary_boot()
versatilepb: Use cpu_arm_init() to obtain ARMCPU
musicpal: Use cpu_arm_init() to obtain ARMCPU
integratorcp: Use cpu_arm_init() to obtain ARMCPU
strongarm: Use cpu_arm_init() to store ARMCPU in StrongARMState
...
* afaerber-or/qom-next-1:
target-i386: Use uint32 visitor for [x]level properties
qdev: Remove PropertyInfo range checking
qdev: Switch property accessors to fixed-width visitor interfaces
qdev: Use int32_t container for devfn property
qapi: Add String visitor coverage to serialization unit tests
qapi: String visitor, use %f representation for floats
qapi: Unit tests for visitor-based serialization
qapi: Add Visitor interfaces for uint*_t and int*_t
Due to a offset between the clock used to generate the in-kernel
count_load_time (CLOCK_MONOTONIC) and the clock used for processing this
in userspace (vm_clock), reading back the output of PIT channel 2 via
port 0x61 was broken. One use cases that suffered from it was the CPU
frequency calibration of SeaBIOS, which also affected IDE/AHCI timeouts.
This fixes it by calibrating the offset between both clocks on
kvm_pit_get and adjusting the kernel value before saving it in the
userspace state. As the calibration only works while the vm_clock is
running, we cache the in-kernel state across stopped phases.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Legacy (non-pvops) gntdev drivers may require this to be done when the
number of grants intended to be used simultaneously exceeds a certain
driver specific default limit.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
kvm_put_apic_state's attempt to clear *kapic before setting its
bits cleared sizeof(void*) bytes (no more than 8) rather than the
intended 1024 (KVM_APIC_REG_SIZE) bytes. Spotted by coverity.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Needed for moving halted field to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Pass it through to arm_pic_cpu_handler().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)
In particular this simplifies the &s->mpu->cpu->env expression again.
first_cpu and ->next_cpu are expected to be QOM'ified later.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Igor Mitsyanko <i.mitsyanko@samsung.com> (for exynos)
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Prepares for moving halted field into CPUState.
Add missing braces.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Prepares for moving halted field to CPUState.
Add missing braces.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
