Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <mvmfrgzcr4m.fsf@suse.de>
Use vaddr instead of target_ulong. At the same time,
use int instead of unsigned long for flags, to match
page_set_flags().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out mmap_lock, et al from page-protection.h
to a new header.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The third argument of the syscall contains the size of the
cpu mask in bytes, not bits. Nor is the size rounded up to
a multiple of sizeof(abi_ulong).
Cc: qemu-stable@nongnu.org
Reported-by: Andreas Schwab <schwab@suse.de>
Fixes: 9e1c7d982d ("linux-user/riscv: Add syscall riscv_hwprobe")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250308225902.1208237-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Very few source files require to access "exec/tb-flush.h"
declarations, and except a pair, they all include it
explicitly. No need to overload the generic "user-internals.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20250102182521.65428-2-philmd@linaro.org>
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
=UF0n
-----END PGP SIGNATURE-----
Merge tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- add a check-rust test to docker builds
- re-factor the qtest logic to be cleaner
- fix tests to not clock_step when no timers enabled
- roll-up log prefix into qtest_send
- cleaner error reporting when qtest_clock_set fails
- revert old deadlock fix now tests are updated
- only run full set of migration tests under HW acceleration
- support late attachment to user-mode gdbstubs
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe
# KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1
# 2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo
# NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW
# 42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0
# Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5
# 87wSjljrCpdNm/9KFRjiJuUWdS/jCg==
# =UF0n
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 10 Feb 2025 08:54:51 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu:
tests/tcg: Add late gdbstub attach test
docs/user: Document the %d placeholder and suspend=n QEMU_GDB features
gdbstub: Allow late attachment
osdep: Introduce qemu_kill_thread()
user: Introduce host_interrupt_signal
user: Introduce user/signal.h
gdbstub: Try unlinking the unix socket before binding
gdbstub: Allow the %d placeholder in the socket path
tests/qtest/migration: Pick smoke tests
tests/qtest/migration: Add --full option
Revert "util/timer: avoid deadlock when shutting down"
tests/qtest: tighten up the checks on clock_step
tests/qtest: rename qtest_send_prefix and roll-up into qtest_send
tests/qtest: simplify qtest_process_inbuf
tests/qtest: don't step clock at start of npcm7xx periodic IRQ test
tests/qtest: don't attempt to clock_step while waiting for virtio ISR
tests/docker: replicate the check-rust-tools-nightly CI job
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
gdbstub needs target_to_host_signal(), so move its declaration to a
public header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20250117001542.8290-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250207153112.3939799-13-alex.bennee@linaro.org>
Add IP_MULTICAST_IF and share the code with IP_ADD_MEMBERSHIP / IP_DROP_MEMBERSHIP.
Sharing the code makes sense, because the manpage of ip(7) says:
IP_MULTICAST_IF (since Linux 1.2)
Set the local device for a multicast socket. The argument
for setsockopt(2) is an ip_mreqn or (since Linux 3.5)
ip_mreq structure similar to IP_ADD_MEMBERSHIP, or an
in_addr structure. (The kernel determines which structure
is being passed based on the size passed in optlen.) For
getsockopt(2), the argument is an in_addr structure.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Avoid using the same error message for two different code paths
as it complicates determining the one which actually triggered.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
The TranslationBlock flags are defined in 'exec/translation-block.h'.
tcg_cflags_has/set() use them, it is more logical to declare them in
the same place. Move them there too.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212144430.66224-2-philmd@linaro.org>
"linux-user/cpu_loop-common.h" is generic enough to be used by
bsd-user, so rename it as "user/cpu_loop.h".
Mechanical change running:
$ sed -i -e 's,cpu_loop-common.h,user/cpu_loop.h,' \
$(git grep -l cpu_loop-common.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-17-philmd@linaro.org>
Move declarations related to page protection under user
emulation from "exec/cpu-all.h" to "user/page-protection.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241212185341.2857-12-philmd@linaro.org>
print_mmap() assumes that mmap() receives arguments via memory if
mmap2() is present. s390x (as opposed to s390) does not fit this
pattern: it does not have mmap2(), but mmap() still receives arguments
via memory.
Fix by sharing the detection logic between syscall.c and strace.c.
Cc: qemu-stable@nongnu.org
Fixes: d971040c2d ("linux-user: Fix strace output for old_mmap")
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20241120212717.246186-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The commit fd6f7798ac ("linux-user: Use direct syscalls for setuid(),
etc") added direct syscall wrappers for setuid(), setgid(), etc since the
system calls have different semantics than the libc functions.
Add and use the corresponding wrappers for setreuid and setregid which
were missed in that commit.
This fixes the build of the debian package of the uid_wrapper library
(https://cwrap.org/uid_wrapper.html) when running linux-user.
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <Zyo2jMKqq8hG8Pkz@p100>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Current definition yields a negative 32bits value, messing up hwprobe
result when Zvfhmin extension presents. Replace it by using a 1ULL bit
shift value as done in kernel upstream.
Link: 5ea6764d90
Fixes: a3432cf227 ("linux-user/riscv: Sync hwprobe keys with Linux")
Cc: qemu-stable@nongnu.org
Signed-off-by: Yao Zi <ziyao@disroot.org>
Message-ID: <20241022160136.21714-2-ziyao@disroot.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If one thread modifies the mappings and another thread prints them,
a situation may occur that the printer thread sees a guest mapping
without a corresponding host mapping, leading to a crash in
open_self_maps_2().
Cc: qemu-stable@nongnu.org
Fixes: 7b7a3366e1 ("linux-user: Use walk_memory_regions for open_self_maps")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241014203441.387560-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Clean up unused (already commented-out) header from syscall.c.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit adds support for the `openat2()` to `QEMU_STRACE`. It
will use the `openat2.h` header if available to create user
readable flags for the `resolve` argument but does not require
the header otherwise.
It also makes `copy_struct_from_user()` available via `qemu.h`
and `open_how_ver0` via `syscall_defs.h` so that strace.c can use
them.
Signed-off-by: Michael Vogt <mvogt@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <f02d40c7751c03af885ced6dd94e4734d4be4d8f.1727795334.git.mvogt@redhat.com>
[rth: Add braces around the expanded how structure, like strace(3)]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit adds support for the `openat2()` syscall in the
`linux-user` userspace emulator.
It is implemented by extracting a new helper `maybe_do_fake_open()`
out of the exiting `do_guest_openat()` and share that with the
new `do_guest_openat2()`. Unfortunately we cannot just make
do_guest_openat2() a superset of do_guest_openat() because the
openat2() syscall is stricter with the argument checking and
will return an error for invalid flags or mode combinations (which
open()/openat() will ignore).
The implementation is similar to SYSCALL_DEFINE(openat2), i.e.
a new `copy_struct_from_user()` is used that works the same
as the kernels version to support backwards-compatibility
for struct syscall argument.
Instead of including openat2.h we create a copy of `open_how`
as `open_how_ver0` to ensure that if the structure grows we
can log a LOG_UNIMP warning.
Note that in this commit using openat2() for a "faked" file in
/proc will honor the "resolve" flags for
RESOLVE_NO_{MAGIC,SYM}LINKS for path based access to /proc/self/exe
(which is the only magic link we support for faked files).
Note it will not catch special access via e.g. dirfd. This is not
great but it seems similar to the exiting behavior when openat()
is called with a dirfd to "/proc". Here too the fake file lookup
may not catch the special file because no dirfd is used to
determine if the path is in /proc.
Signed-off-by: Michael Vogt <mvogt@redhat.com>
Buglink: https://github.com/osbuild/bootc-image-builder/issues/619
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <1c2c8c9db3731ed4c6fd9b10c63637c3e4caf8f5.1727795334.git.mvogt@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we alwasy build with LFS enabled, and with -D_FILE_OFFSET_BITS=64
in particular, there is no need to use 64bit versions of various system
calls and constants, regular ones will do just fine. Eliminate a few
last uses of the following constructs in linux-user/syscall.c:
off64_t
ftruncate64()
lseek64()
pread64()
pwrite64()
This way it can be built on systems where the 64bit variants of
everything is not defined (since the system always uses 64bit
variants), such as on recent MUSL.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2215
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Since we are always building with LFS enabled, in particular
with -D_FILE_OFFSET_BITS=64, we should always have struct flock
mapped to the 64bit variant (with off64_t), and F_GETLK mapped
to F_GETLK64 etc, automatically.
So there should be no need to explicitly use the "64" suffix
for these things anymore.
Also fix a misleading comment near safe_fcntl telling us to
always use flock64 (since v2.6.0-1311-g435da5e7092a "linux-user:
Use safe_syscall wrapper for fcntl").
Reference: https://gitlab.com/qemu-project/qemu/-/issues/2215
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
As per the deprecation notice in commit c7bbef4023:
The CRIS architecture was pulled from Linux in 4.17 and
the compiler is no longer packaged in any distro making
it harder to run the `check-tcg` tests. Unless we can
improve the testing situation there is a chance the code
will bitrot without anyone noticing.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-ID: <20240904143603.52934-5-philmd@linaro.org>
The num_threads field reports the total number of threads in the
process. In QEMU, this is equal to the number of CPU instances.
Signed-off-by: Fabio D'Urso <fdurso@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20240619194109.248066-1-fdurso@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Factor out the code used for setting the MTE TCF0 field from the prctl
code into a convenient function. Other subsystems, like gdbstub, need to
set this field as well, so keep it as a separate function to avoid
duplication and ensure consistency in how this field is set across the
board.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-Id: <20240628050850.536447-7-gustavo.romero@linaro.org>
[AJB: clean-up includes, move MTE defines]
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-36-alex.bennee@linaro.org>
Like TARGET_NR_setuid, TARGET_NR_setgroups should affect only the
calling thread, and not the entire process. Therefore, implement it
using a syscall, and not a libc call.
Cc: qemu-stable@nongnu.org
Fixes: 19b84f3c35 ("added setgroups and getgroups syscalls")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240614154710.1078766-1-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Get the TaskState pointer calling get_task_state().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240428221450.26460-11-philmd@linaro.org>
Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
There's identical code for SO_SNDTIMEO and SO_RCVTIMEO, currently
implemented using an ugly goto into another switch case. Eliminate
that using arithmetic if, making code flow more natural.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-5-mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-4-mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ip_mreq is declared at the beginning of do_setsockopt(), while
it is used in only one place. Move its declaration to that very
place and replace pointer to alloca()-allocated memory with the
structure itself.
target_to_host_ip_mreq() is used only once, inline it.
This change also properly handles TARGET_EFAULT when the address
is wrong.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-3-mjt@tls.msk.ru>
[rth: Fix braces, adjust optlen to match host structure size]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This setsockopt accepts zero-lengh optlen (current qemu implementation
does not allow this). Also, there's no need to make a copy of the key,
it is enough to use lock_user() (which accepts zero length already).
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2197
Fixes: f31dddd2fc "linux-user: Add support for setsockopt() option SOL_ALG"
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <20240331100737.2724186-2-mjt@tls.msk.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The copy back to siginfo_t should be conditional only on arg3,
not the specific values that might have been written.
The copy back to rusage was missing entirely.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2262
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Fan <alex.fan.q@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Both of these only pass and return integral values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The "set" prctl passes through integral values.
The "get" prctl returns the value into a pointer.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1929
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This patch exposes Ztso via hwprobe in QEMU's user space emulator.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240207122256.902627-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upstream Linux recently added many additional keys to the hwprobe API.
This patch adds support for all of them with the exception of Ztso,
which is currently not supported in QEMU.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240207115926.887816-3-christoph.muellner@vrull.eu>
[ Changes by AF:
- Fixup whitespace
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upstream Linux recently added RISC-V Zicboz support to the hwprobe API.
This patch introduces this for QEMU's user space emulator.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240207115926.887816-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The upcoming follow-fork-mode child support requires knowing the child
pid. Pass it down.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-6-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-7-alex.bennee@linaro.org>
A CPU's TaskState is stored in the CPUState's void *opaque field,
accessing which is somewhat awkward due to having to use a cast.
Introduce a wrapper and use it everywhere.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240219141628.246823-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-4-alex.bennee@linaro.org>
This is the only case in which we expect to have no host memory backing
for a guest memory page, because in general linux user processes cannot
map any pages in the top half of the 64-bit address space.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2170
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Support for probing the Zicboz block size landed in Linux 6.6, which was
released a few weeks ago. This provides the user-configured block size
when Zicboz is enabled.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231110173716.24423-1-palmer@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
p is a generic variable in syscall() and can be used by any syscall
case, so this patch removes the useless local variable declaration for
the following syscalls: TARGET_NR_llistxattr, TARGET_NR_listxattr,
TARGET_NR_setxattr, TARGET_NR_lsetxattr, TARGET_NR_getxattr,
TARGET_NR_lgetxattr, TARGET_NR_removexattr, TARGET_NR_lremovexattr.
Fix following warnings:
.../linux-user/syscall.c:12342:15: warning: declaration of 'p' shadows a previous local [-Wshadow=compatible-local]
12342 | void *p, *b = 0;
| ^
.../linux-user/syscall.c:8975:11: note: shadowed declaration is here
8975 | void *p;
| ^
.../linux-user/syscall.c:12379:19: warning: declaration of 'p' shadows a previous local [-Wshadow=compatible-local]
12379 | void *p, *n, *v = 0;
| ^
.../linux-user/syscall.c:8975:11: note: shadowed declaration is here
8975 | void *p;
| ^
.../linux-user/syscall.c:12424:19: warning: declaration of 'p' shadows a previous local [-Wshadow=compatible-local]
12424 | void *p, *n, *v = 0;
| ^
.../linux-user/syscall.c:8975:11: note: shadowed declaration is here
8975 | void *p;
| ^
.../linux-user/syscall.c:12469:19: warning: declaration of 'p' shadows a previous local [-Wshadow=compatible-local]
12469 | void *p, *n;
| ^
.../linux-user/syscall.c:8975:11: note: shadowed declaration is here
8975 | void *p;
| ^
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20230925151029.461358-6-laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>