pcie_sriov_pf_disable_vfs() is called when resetting the PF, but it only
disables VFs and does not reset SR-IOV extended capability, leaking the
state and making the VF Enable register inconsistent with the actual
state.
Replace pcie_sriov_pf_disable_vfs() with pcie_sriov_pf_reset(), which
does not only disable VFs but also resets the capability.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-3-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
The guest may write NumVFs greater than TotalVFs and that can lead
to buffer overflow in VF implementations.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2024-26327
Fixes: 7c0fa8dff8 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-2-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
nvme_sriov_pre_write_ctrl() used to directly inspect SR-IOV
configurations to know the number of VFs being disabled due to SR-IOV
configuration writes, but the logic was flawed and resulted in
out-of-bound memory access.
It assumed PCI_SRIOV_NUM_VF always has the number of currently enabled
VFs, but it actually doesn't in the following cases:
- PCI_SRIOV_NUM_VF has been set but PCI_SRIOV_CTRL_VFE has never been.
- PCI_SRIOV_NUM_VF was written after PCI_SRIOV_CTRL_VFE was set.
- VFs were only partially enabled because of realization failure.
It is a responsibility of pcie_sriov to interpret SR-IOV configurations
and pcie_sriov does it correctly, so use pcie_sriov_num_vfs(), which it
provides, to get the number of enabled VFs before and after SR-IOV
configuration writes.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2024-26328
Fixes: 11871f53ef ("hw/nvme: Add support for the Virtualization Management command")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-1-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Felix Wu <flwu@google.com>
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Message-Id: <20240221170027.1027325-3-nabihestefan@google.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Version 2.1+.
Signed-off-by: Felix Wu <flwu@google.com>
Signed-off-by: Nabih Estefan <nabihestefan@google.com>
Message-Id: <20240221170027.1027325-2-nabihestefan@google.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IOAPICCommonClass implements its own private realize(), and this private
realize() allows error.
Since IOAPICCommonClass.realize() returns void, to check the error,
dereference @errp with ERRP_GUARD().
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240223085653.1255438-8-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in iommufd_cdev_getfd(), @errp is dereferenced without ERRP_GUARD():
if (*errp) {
error_prepend(errp, VFIO_MSG_PREFIX, path);
}
Currently, since vfio_attach_device() - the caller of
iommufd_cdev_getfd() - is always called in DeviceClass.realize() context
and doesn't get the NULL @errp parameter, iommufd_cdev_getfd()
hasn't triggered the bug that dereferencing the NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
iommufd_cdev_getfd().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240223085653.1255438-7-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in cxl_usp_realize(), @errp is dereferenced without ERRP_GUARD():
cxl_doe_cdat_init(cxl_cstate, errp);
if (*errp) {
goto err_cap;
}
Here we check *errp, because cxl_doe_cdat_init() returns void. And since
cxl_usp_realize() - as a PCIDeviceClass.realize() method - doesn't get
the NULL @errp parameter, it hasn't triggered the bug that dereferencing
the NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
cxl_usp_realize().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240223085653.1255438-6-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in trng_prop_fault_event_set, @errp is dereferenced without
ERRP_GUARD():
visit_type_uint32(v, name, events, errp);
if (*errp) {
return;
}
Currently, since trng_prop_fault_event_set() doesn't get the NULL @errp
parameter as a "set" method of object property, it hasn't triggered the
bug that dereferencing the NULL @errp.
And since visit_type_uint32() returns bool, check the returned bool
directly instead of dereferencing @errp, then we needn't the add missing
ERRP_GUARD().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240223085653.1255438-5-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in ct3_realize(), @errp is dereferenced without ERRP_GUARD():
cxl_doe_cdat_init(cxl_cstate, errp);
if (*errp) {
goto err_free_special_ops;
}
Here we check *errp, because cxl_doe_cdat_init() returns void. And
ct3_realize() - as a PCIDeviceClass.realize() method - doesn't get the
NULL @errp parameter, it hasn't triggered the bug that dereferencing
the NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
ct3_realize().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240223085653.1255438-4-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in macfb_nubus_realize(), @errp is dereferenced without
ERRP_GUARD():
ndc->parent_realize(dev, errp);
if (*errp) {
return;
}
Here we check *errp, because the ndc->parent_realize(), as a
DeviceClass.realize() callback, returns void. And since
macfb_nubus_realize(), also as a DeviceClass.realize(), doesn't get the
NULL @errp parameter, it hasn't triggered the bug that dereferencing the
NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
macfb_nubus_realize().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240223085653.1255438-3-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As the comment in qapi/error, dereferencing @errp requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
* - It must not be dereferenced, because it may be null.
...
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
*
* Using it when it's not needed is safe, but please avoid cluttering
* the source with useless code.
But in cxl_fixed_memory_window_config(), @errp is dereferenced in 2
places without ERRP_GUARD():
fw->enc_int_ways = cxl_interleave_ways_enc(fw->num_targets, errp);
if (*errp) {
return;
}
and
fw->enc_int_gran =
cxl_interleave_granularity_enc(object->interleave_granularity,
errp);
if (*errp) {
return;
}
For the above 2 places, we check "*errp", because neither function
returns a suitable error code. And since machine_set_cfmw() - the caller
of cxl_fixed_memory_window_config() - doesn't get the NULL @errp
parameter as the "set" method of object property,
cxl_fixed_memory_window_config() hasn't triggered the bug that
dereferencing the NULL @errp.
To follow the requirement of @errp, add missing ERRP_GUARD() in
cxl_fixed_memory_window_config().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240223085653.1255438-2-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds support for VDPA network simulation devices.
The device is developed based on virtio-net and tap backend,
and supports hardware live migration function.
For more details, please refer to "docs/system/devices/vdpa-net.rst"
Signed-off-by: Hao Chen <chenh@yusur.tech>
Message-Id: <20240221073802.2888022-1-chenh@yusur.tech>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shared objects lack spoofing protection.
For VHOST_USER_BACKEND_SHARED_OBJECT_REMOVE messages
received by the vhost-user interface, any backend was
allowed to remove entries from the shared table just
by knowing the UUID. Only the owner of the entry
shall be allowed to removed their resources
from the table.
To fix that, add a check for all
*SHARED_OBJECT_REMOVE messages received.
A vhost device can only remove TYPE_VHOST_DEV
entries that are owned by them, otherwise skip
the removal, and inform the device that the entry
has not been removed in the answer.
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20240219143423.272012-2-aesteve@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The payload size returned by command VIRTIO_SND_R_PCM_INFO is
wrong. The code in process_cmd() assumes that all commands
return only a virtio_snd_hdr payload, but some commands like
VIRTIO_SND_R_PCM_INFO may return an additional payload.
Add a zero initialized payload_size variable to struct
virtio_snd_ctrl_command to allow for additional payloads.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240218083351.8524-1-vr_qemu@t-online.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This CXL component isn't allowed to have a RAS capability.
Whilst this should be harmless as software is not expected to look
here, good to clean it up.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240215155206.2736-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sometimes, certain parts are not being skipped in
vhost_vdpa_listener_region_del, but they are skipped in
vhost_vdpa_listener_region_add, or vice versa. The vhost-vdpa code
expects all parts to maintain their properties, so we're adding a trace
to help with debugging when any part is skipped.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240215103616.330518-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next changes uses this variables, so avoid call repeatedly to memory
region functions. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240215103616.330518-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch extends the PCIe link speed option so that slots can be
configured as supporting 32GT/s (Gen5) or 64GT/s (Gen5) speeds.
This is as simple as setting the appropriate bit in LnkCap2 and
the appropriate value in LnkCap and LnkCtl2.
Signed-off-by: Lukas Stockner <lstockner@genesiscloud.com>
Message-Id: <20240215012326.3272366-1-lstockner@genesiscloud.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix an issue where cancellation of ongoing migration ends up
with no network connectivity.
When canceling migration, SVQ will be switched back to the
passthrough mode, but the right call fd is not programed to
the device and the svq's own call fd is still used. At the
point of this transitioning period, the shadow_vqs_enabled
hadn't been set back to false yet, causing the installation
of call fd inadvertently bypassed.
Message-Id: <1707910082-10243-13-git-send-email-si-wei.liu@oracle.com>
Fixes: a8ac88585d ("vhost: Add Shadow VirtQueue call forwarding capabilities")
Cc: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For better debuggability and observability.
Message-Id: <1707910082-10243-8-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For better debuggability and observability.
Message-Id: <1707910082-10243-7-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generalize duplicated condition check for the last vq of vdpa
device to a common function.
Message-Id: <1707910082-10243-4-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Prefer fast cpu_env() over slower CPU QOM cast macro
-----BEGIN PGP SIGNATURE-----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=NiP4
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu into staging
* Add missing ERRP_GUARD() statements in functions that need it
* Prefer fast cpu_env() over slower CPU QOM cast macro
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXwPhYRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWHvBAAgKx5LHFjz3xREVA+LkDTQ49mz0lK3s32
# SGvNlIHjiaDGVttVYhVC4sinBWUruG4Lyv/2QN72OJBzn6WUsEUQE3KPH1d7Y3/s
# wS9X7mj70n4kugWJqeIJP5AXSRasHmWoQ4QJLVQRJd6+Eb9jqwep0x7bYkI1de6D
# bL1Q7bIfkFeNQBXaiPWAm2i+hqmT4C1r8HEAGZIjAsMFrjy/hzBEjNV+pnh6ZSq9
# Vp8BsPWRfLU2XHm4WX0o8d89WUMAfUGbVkddEl/XjIHDrUD+Zbd1HAhLyfhsmrnE
# jXIwSzm+ML1KX4MoF5ilGtg8Oo0gQDEBy9/xck6G0HCm9lIoLKlgTxK9glr2vdT8
# yxZmrM9Hder7F9hKKxmb127xgU6AmL7rYmVqsoQMNAq22D6Xr4UDpgFRXNk2/wO6
# zZZBkfZ4H4MpZXbd/KJpXvYH5mQA4IpkOy8LJdE+dbcHX7Szy9ksZdPA+Z10hqqf
# zqS13qTs3abxymy2Q/tO3hPKSJCk1+vCGUkN60Wm+9VoLWGoU43qMc7gnY/pCS7m
# 0rFKtvfwFHhokX1orK0lP/ppVzPv/5oFIeK8YDY9if+N+dU2LCwVZHIuf2/VJPRq
# wmgH2vAn3JDoRKPxTGX9ly6AMxuZaeP92qBTOPap0gDhihYzIpaCq9ecEBoTakI7
# tdFhV0iRr08=
# =NiP4
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Mar 2024 11:35:50 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu: (55 commits)
user: Prefer fast cpu_env() over slower CPU QOM cast macro
target/xtensa: Prefer fast cpu_env() over slower CPU QOM cast macro
target/tricore: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sparc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/sh4: Prefer fast cpu_env() over slower CPU QOM cast macro
target/rx: Prefer fast cpu_env() over slower CPU QOM cast macro
target/ppc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/openrisc: Prefer fast cpu_env() over slower CPU QOM cast macro
target/nios2: Prefer fast cpu_env() over slower CPU QOM cast macro
target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro
target/microblaze: Prefer fast cpu_env() over slower CPU QOM cast macro
target/m68k: Prefer fast cpu_env() over slower CPU QOM cast macro
target/loongarch: Prefer fast cpu_env() over slower CPU QOM cast macro
target/i386/hvf: Use CPUState typedef
target/hexagon: Prefer fast cpu_env() over slower CPU QOM cast macro
target/cris: Prefer fast cpu_env() over slower CPU QOM cast macro
target/avr: Prefer fast cpu_env() over slower CPU QOM cast macro
target/alpha: Prefer fast cpu_env() over slower CPU QOM cast macro
target: Replace CPU_GET_CLASS(cpu -> obj) in cpu_reset_hold() handler
bulk: Call in place single use cpu_env()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a SPAPR capability cap-nested-papr which enables nested PAPR
API for nested guests. This new API is to enable support for KVM on PowerVM
and the support in Linux kernel has already merged upstream.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The H_GUEST_RUN_VCPU hcall is used to start execution of a Guest VCPU.
The Hypervisor will update the state of the Guest VCPU based on the
input buffer, restore the saved Guest VCPU state, and start its
execution.
The Guest VCPU can stop running for numerous reasons including HCALLs,
hypervisor exceptions, or an outstanding Host Partition Interrupt.
The reason that the Guest VCPU stopped running is communicated through
R4 and the output buffer will be filled in with any relevant state.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
For nested PAPR API, we use SpaprMachineStateNestedGuest struct to store
partition table info, use the same in spapr_get_pate_nested() via
helper.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce the nested PAPR hcalls:
- H_GUEST_GET_STATE which is used to get state of a nested guest or
a guest VCPU. The value field for each element in the request is
destination to be updated to reflect current state on success.
- H_GUEST_SET_STATE which is used to modify the state of a guest or
a guest VCPU. On success, guest (or its VCPU) state shall be
updated as per the value field for the requested element(s).
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Nested PAPR API provides a standard Guest State Buffer (GSB) format
with unique IDs for each guest state element for which get/set state is
supported by the API. Some of the elements are read-only and/or guest-wide.
Introducing additional required GSB elements and helper routines for state
exchange of each of the nested guest state elements for which get/set state
should be supported by the API.
[amachhiw: set the PCR whenever logical PVR is set]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.vnet.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently, nested_ppc_state stores a certain set of registers and works
with nested_[load|save]_state() for state transfer as reqd for nested-hv API.
Extending these with additional registers state as reqd for nested PAPR API.
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce the nested PAPR hcall H_GUEST_CREATE_VCPU which is used to
create and initialize the specified VCPU resource for the previously
created guest. Each guest can have multiple VCPUs upto max 2048.
All VCPUs for a guest gets deallocated on guest delete.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce the nested PAPR hcalls:
- H_GUEST_CREATE which is used to create and allocate resources for
nested guest being created.
- H_GUEST_DELETE which is used to delete and deallocate resources
for the nested guest being deleted. It also supports deleting all nested
guests at once using a deleteAll flag.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Introduce the nested PAPR hcalls:
- H_GUEST_GET_CAPABILITIES which is used to query the capabilities
of the API and the L2 guests it provides.
- H_GUEST_SET_CAPABILITIES which is used to set the Guest API
capabilities that the Host Partition supports and may use.
[amachhiw: support for p9 compat mode and return register bug fixes]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Amit Machhiwal <amachhiw@linux.vnet.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
spapr_exit_nested and spapr_get_pate_nested_hv contains code which
is specific to nested-hv API. Isolating code flows based on API
helps extending it to be used with different API as well.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Currently, nested_ptcr is being used by existing nested-hv API to store
nested guest related info. This need to be organised to extend support
for the nested PAPR API which would need to store additional info
related to nested guests in next series of patches.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Most of the nested code has already been moved to spapr_nested.c
This logic inside spapr_get_pate is related to nested guests and
better suited for spapr_nested.c, hence moving there.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since cap-nested-hv is an optional capability, it makes sense to register
api specfic hcalls only when respective capability is enabled. This
requires to introduce a new API to unregister hypercalls to maintain
sanity across guest reboot since caps are re-applied across reboots and
re-registeration of hypercalls would hit assert otherwise.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Big (SMT8) cores have a complicated function to map the core, thread ID
to pervasive topology (PIR). Fix this for power8, power9, and power10.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Caleb Schlossin <calebs@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Copy the pa-features arrays from spapr, adjusting slightly as
described in comments.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This allows different pa-features for powernv8/9/10.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Add POWER10 pa-features entry.
Notably DEXCR and [P]HASHST/[P]HASHCHK instruction support is
advertised. Each DEXCR aspect is allocated a bit in the device tree,
using the 68--71 byte range (inclusive). The functionality of the
[P]HASHST/[P]HASHCHK instructions is separately declared in byte 72,
bit 0 (BE).
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
[npiggin: reword title and changelog, adjust a few bits]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
"MMR" and "SPR SO" are not implemented in POWER9, so clear those bits.
HTM is not set by default, and only later if the cap is set, so remove
the comment that suggests otherwise.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
TCG does not support copy/paste instructions. Remove it from
ibm,pa-features. This has never been implemented under TCG or
practically usable under KVM, so it won't be missed.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
SAO is a page table attribute that strengthens the memory ordering of
accesses. QEMU with MTTCG does not implement this, so clear it in
ibm,pa-features. This is an obscure feature that has been removed from
POWER10 ISA v3.1, there isn't much concern with removing it.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The POWER9 DD1 and POWER10 DD1 chips are not public and are no longer of
any use in QEMU. Remove them.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The initial MSR state for the OpenFirmware binding specifies
MSR[ME] and MSR[FP] are set.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Commit 1901b4967c ("hw/block/nvme: move msix table and pba to BAR 0")
moved the MSI-X table and PBA to BAR 0 to make room for enabling CMR and
PMR at the same time. As reported by Julien Grall in #2184, this breaks
migration through system hibernation.
Add a machine compatibility parameter and set it on machines pre 6.0 to
enable the old behavior automatically, restoring the hibernation
migration support.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2184
Fixes: 1901b4967c ("hw/block/nvme: move msix table and pba to BAR 0")
Reported-by: Julien Grall julien@xen.org
Tested-by: Julien Grall julien@xen.org
Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
