* kraxel/usb.37:
usb-redir: Improve some debugging messages
usb-redir: Try to keep our buffer size near the target size
usb-redir: Pre-fill our isoc input buffer before sending pkts to the host
usb-redir: Dynamically adjust iso buffering size based on ep interval
usb-redir: Clear iso / irq error when stopping the stream
usb: link packets to endpoints not devices
usb: add max_packet_size to USBEndpoint
usb/debug: add usb_ep_dump
usb-desc: USBEndpoint support
usb: add ifnum to USBEndpoint
usb: add USBEndpoint
xhci: Initial xHCI implementation
usb: add audio device model
usb-desc: audio endpoint support
usb: track altsetting in USBDevice
usb: track configuration and interface count in USBDevice.
usb-host: rip out legacy procfs support
This introduces the KVM-accelerated IOAPIC model 'kvm-ioapic' and
extends the IRQ routing setup by the 0->2 redirection when needed.
The kvm-ioapic model has a property that allows to define its GSI base
for injecting interrupts into the kernel model. This will allow to
disentangle PIC and IOAPIC pins for chipsets that support more
sophisticated IRQ routes than the PIIX3. So far the base is kept at 0,
i.e. PIC and IOAPIC share pins 0..15.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Introduce the alternative 'kvm-i8259' device model that exploits KVM
in-kernel acceleration.
The PIIX3 initialization code is furthermore extended by KVM specific
IRQ route setup. GSI injection differs in KVM mode from the user space
model. As we can dispatch ISA-range IRQs to both IOAPIC and PIC inside
the kernel, we do not need to inject them separately. This is reflected
by a KVM-specific GSI handler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This introduces the alternative APIC device which makes use of KVM's
in-kernel device model. External NMI injection via LINT1 is emulated by
checking the current state of the in-kernel APIC, only injecting a NMI
into the VCPU if LINT1 is unmasked and configured to DM_NMI.
MSI is not yet supported, so we disable this when the in-kernel model is
in use.
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
KVM is forced to disable the IRQ0 override when we run with in-kernel
irqchip but without IRQ routing support of the kernel. Set the fwcfg
value correspondingly. This aligns us with qemu-kvm.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Split up the IOAPIC analogously to APIC and i8259. KVM will share the
IOAPICCommonState, the vmstate, reset logic and certain init parts with
the user space model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
As all devices undergo a reset prior to vmloa, and the reset value of
irr is 0, we do not need to do this clearing for older vmstates
explicitly. Dropping this redundant code will also make KVM integration
a bit simpler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Analogously to the APIC, we will reuse some parts of the user space
i8259 model for KVM. The base class provides a common device state, the
vmstate, the property list, a reset core and some shared init bits.
This also introduces a common helper to instantiate a single i8259 chip
from the cascade-creating i8259_init function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Use DeviceState instead of PicState in the public i8259 API. This is
cleaner and allows to reorganize the PIC data structures for KVM reuse.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
To enable migration between accelerated and non-accelerated APIC models,
we will need to handle the timer saving and restoring specially and can
no longer rely on the automatics of VMSTATE_TIMER. Specifically,
accelerated model will not start any QEMUTimer.
This patch therefore factors out the generic bits into apic_next_timer
and use a post-load callback to implemented model-specific logic.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The KVM in-kernel APIC model will reuse parts of the user space model
while providing the same frontend view to guest and most management
interfaces.
Factor out an APIC base class to encapsulate those parts that will be
shared by user space and KVM model. This class offers callback hooks for
init, base/tpr setting, and the external NMI delivery that will be
set via APICCommonInfo structure and implemented specifically in the
subclasses.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
On real hardware, NMI button events are injected via the LINT1 line of
the APICs. E.g. kdump expect this wiring and gets upset if the per-APIC
LINT1 mask is not respected, i.e. if NMIs are injected to VCPUs that
should not receive them. Change the APIC emulation code to reflect this.
Based on qemu-kvm patch by Lai Jiangshan.
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
All LVTs are masked on reset, so the timer becomes ineffective. Letting
it tick nevertheless is harmless, but will at least create a spurious
trace event.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
More KVM-specific devices will come, so let's start with moving the
kvmclock into a dedicated folder.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Rename msix_supported to msi_supported and control MSI and MSI-X
activation this way. That was likely to original intention for this
flag, but MSI support came after MSI-X.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Commit d23948b15a (lm32: add Milkymist
VGAFB support) introduced a stray usage of the softfloat uint32 type.
Use uint32_t instead.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This enable us to do passthrough equivalent security model on NFS directory.
NFS server mostly do root squashing and don't support xattr. Hence we cannot
use 'passthrough' or 'mapped' security model
Also added "mapped-xattr" security to indicate earlier "mapped" security model
Older name is still supported.
POSIX rules regarding ctime update on chmod are not followed by this security model.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Increase the maximum number of GIC interrupts for a9mp and a11mp to 1020,
and create a configurable property for each defaulting to 96 and 64
(respectively) so that device modelers can set the value appropriately
for their SoC. Other ARM processors also set their maximum number of
used IRQs appropriately.
Set the maximum theoretical number of GIC interrupts to 1020 and
update the save/restore code to only use the appropriate number for
each SoC.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[Peter Maydell: fixed minor whitespace snafu]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current comment says that the arm_timers are restricted to between
32 KHz and 1 MHz, but sp804 TRM does not specify those limits.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the L2 cache controller on the ARM devboards which have one,
since we have a dummy model of it now. Note that the only non-MP board
with an L2x0 is the PB1176, which we don't model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add USBEndpoint for the control endpoint to USBDevices. Link async
packets to the USBEndpoint instead of the USBDevice.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Start maintaining endpoint state at USBDevice level. Add USBEndpoint
struct and some helper functions to deal with it. For now it contains
the endpoint type only. Moved over some bits from usb-linux.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on the implementation from Hector Martin <hector@marcansoft.com>
Hectors's implementation completely sidestepped the qemu usb system and
used libusb directly for usb device pass through. So I've ripped out
the libusb bits (or left them in disabled, as reference for further
coding) and hooked up the qemu subsystem instead. That work is not
complete yet though, partly due to limitations of the qemu usb
subsystem. Nevertheless I think it is better to continue development
in-tree, especially as the qemu usb bits need a bunch of improvements
too for decent usb 3.0 support.
Current state:
- usb-storage emulation should work ok.
- Devices which need constant polling (HID emulation like usb-tablet)
are known to not work.
- ISO xfers are not implemented yet.
- superspeed ports are not implemented yet.
- usb pass-through is completely untested so far.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The secondary CPU bootloader in arm_boot.c holds secondary CPUs in a
pen until the primary CPU releases them. Make boards specify the
address to be polled to determine whether to leave the pen (it was
previously hardcoded to 0x10000030, which is a Versatile Express/
Realview specific system register address).
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
u-boot uses single automatic scans and polling in
pxa2xx_keypad driver, so clear KPC_AS bit immediately
and update keys state even if KPC_AS and KPC_ASACT are
cleared.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Pallete entry size for 16bpp format is 2 bytes, not 4
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Obviously, linking the RTC device state to the PIIX does not belong into
the common path that is shared with the isapc.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev is now equipped (thanks to the last commit) to disassociate
chardevs from the qdev devices on the devices going away. So doing it
in the virtio-console driver is not necessary.
Since that was the only thing being done in the qdev exit method, drop
it entirely.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a device is removed, remove the association with a chardev, if any,
so that the chardev can be re-used later for other devices.
Reported-by: Qunfang Zhang <qzhang@redhat.com>
Fix-suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU does have a "scsi" option (to be used like -device
virtio-blk-pci,drive=foo,scsi=off). However, it only
masks the feature bit, and does not reject the command
if a malicious guest disregards the feature bits and
issues a request.
Without this patch, using scsi=off does not protect you
from CVE-2011-4127.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When an rtc interrupt is reinjected immediately after being acked,
other interrupts should not be reinjected, so do clear their bits.
Also, if the periodic interrupts have been disabled before acking,
do not reinject, as the guest might get very confused!
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hours in 12-hour mode are in the 1-12 range, not 0-11.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 8eb0283 broken device_del by having too overzealous reference counting
checks. Move the reference count checks to qdev_free(), make sure to remove
the parent link on free, and decrement the reference count on property removal.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These comments are used by static code analysis tools and in code reviews
to avoid false warnings because of missing break statements.
The case statements handled here were reported by coverity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The RFBI_READ/RFBI_STATUS code incorrectly uses chip[0] when it should
be using chip[1]. Andrzej Zaborowski <balrog@zabor.org> confirmed this
bug since I don't know this code well.
Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Reviewed-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This brings a usb audio device to qemu. Output only, fixed at
16bit stereo @ 480000 Hz. Based on a patch from
H. Peter Anvin <hpa@linux.intel.com>
Usage: add '-device usb-audio' to your qemu command line.
Works sorta ok on a idle machine. Known issues:
* Is *very* sensitive to latencies.
* Burns quite some CPU due to usb polling.
In short: It brings the qemu usb emulation to its limits. Enjoy!
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
